URL link in MSS/ESS

Hi Everybody,
Is it possible to insert URL link in Area group page in MSS.
If possible please guide me how to do it?
Thanks in Advance.

Closin the thread

Similar Messages

MSS/ESS - PCR application

Hi all,
I'm new to the BP MSS/ESS and before make any change on WD applications, I would like to read your advices.
We need to create a validation on PCR(everytime a PCR is submitted several Infotype fields must be checked), where should I go for these changes? Straight on STD Web Dynpro application(in this case is MSS/PCR application) or is there a t table on SIMG_SPORT customization which I can provide this validation? How would you guys proceed on this case?
Thanks,
André

Hi Andre
This is part of the J2EE setup, you need to create an HTTP setup using Visual Administrator as described in the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/27098edb036025e10000000a422035/frameset.htm
Thanks
Michael

Create Travel Expense Report link missing in ESS

Hello Gurus,
I am unable to see the Create Travel Expense Report link in the ESS Travel & Management tab. I have modified SPRO and details are as below:
1) In SPRO, I have copied the standard Resource (EMPLOYEE_TRAVEL_EXPENSES_SRV05) and Service (EMPLOYEE_TRAVEL_EXPENSEREPORT05) as new Resource (Z_EMPLOYEE_TRAVEL_EXPENSES_SRV05) and Service (Z_EMPLOYEE_TRAVEL_EXPENSEREPORT05).
2) I have changed the URL Parameter in Z_EMPLOYEE_TRAVEL_EXPENSES_SRV05.
3) Later I have deleted the new "Z" Resource and Service that I have created in the SPRO, so that I wanted to default back to the standard.
After deleting the "Z" Resource and Service in SPRO, I am not able to see the "Create Travel Expense Report" link from the Travel and Expenses area page in portal. Though I was able to execute the iView directly from the Portal PCD.
Did any one got similar kind of problem ????
Could you please reply with your suggestion or advise how you have fixed this problem.
Thanks for any help.
Ram.

Hi Bharathwaj,
Thanks for your helpful answer.
I have checked the Area Page EMPLOYEE_TRAVEL_ERP2005, but I don't see any entry for services.
It has Area Link Text, Picture Resource, Area Link Type and Link Resource only....
Can you suggest if I have to see any other setting ??
Thanks for your help.
Ram.

MSS/ESS customizations

Hi all,
I'm a bit new regarding MSS/ESS customizations and I would like to know where can I find the right customization path in SIMG_SPORT / SPRO or t-code for this error message on portal page :
"The properties for destination FP_ICF_DATA of type HTTP could not be located".
Thanks in advance,
André

Hi Andre
This is part of the J2EE setup, you need to create an HTTP setup using Visual Administrator as described in the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/27098edb036025e10000000a422035/frameset.htm
Thanks
Michael

List of MSS & ESS Forms

Hi,
I am looking for List of forms in MSS & ESS.
Thanks

List varies depending on whether you are on Enhancement pack or not, and on which enhancement pack...
check this link below , if you are on EhP2 you can find the list in tcode HRASR_DT.
[_http://help.sap.com/erp2005_ehp_04/helpdata/en/fe/1bd54243063658e10000000a155106/frameset.htm_|http://help.sap.com/erp2005_ehp_04/helpdata/en/fe/1bd54243063658e10000000a155106/frameset.htm]
regards
Sridhar

How can I send to a different URL link than what the text states in Acrobat?

Hi there
I know how to create URL links in my document using Acrobat but
How can I create a link that goes to a different URL desintation other than the one the text states?
For example
the text states
www.aaaaa.com
and I want it to state this,
but I want the link to direct to
www.aaaaa.com/abcdefghijkl
I dont want to have to create a link object, I want it to stay as text?
Is this even possible?
Any advise?
Thanks

try67 wrote:
Actually, it is possible to specify your own tooltip text, if you use a
button instead of a link.
You just set the button's action to "Open a weblink" and it will act the
same as a link, but you'll have more control over how it looks and behaves.
Hi there
I cant see the term "Open a weblink". Can you advise please?
Also then how do you change the "Tooltip text" please?

How to change URL/link in cFolders email notification

Hi Folks,
We are on cFolders 4.5 accessed via Enterprise Portal. When a notification is generated (either manually or via a status transition), the email contains a URL link related to the cfolder object the notification pertains to. This URL points to the cFolders BSP application. How do we point this to the portal? We want all user to access cFolders via the portal and not BSP. Any way to achieve this?
Thanks,
Lashan

Hello Lashan,
could you please tell me the note number?
Here we also would like to implement the same.
Thanks in advance,
Boldi

How to display URL images and URL link (html) from Smartforms?

Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
         lc_true(1) VALUE 'X',
         lw_control_parameters TYPE ssfctrlop,
         lw_output_options TYPE ssfcompop,
         lc_graphics(8) VALUE 'GRAPHICS',
         lw_xsfparam_line TYPE ssfxsfp,
         lc_extract(7) VALUE 'EXTRACT',
         lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
         lc_mygraphics(11) VALUE 'mygraphics/',
         lc_content_id(10) VALUE 'CONTENT-ID',
         lc_enable(6) VALUE 'ENABLE',
         lw_job_output_info TYPE ssfcrescl,
         lw_html_data TYPE trfresult,
         lw_graphics TYPE ssf_xsf_gr,
         lt_graphics TYPE tsf_xsf_gr,
         lv_html_xstr TYPE xstring,
         lw_html_raw LIKE LINE OF lw_html_data-content,
         lv_incode TYPE tcp00-cpcodepage VALUE '4110',
         lv_html_str TYPE string,
         lv_html_len TYPE i,
         lc_utf8(5) VALUE 'utf-8',
         lc_latin1(6) VALUE 'latin1',
         lv_offset TYPE i,
         lv_length TYPE i,
         lv_diff TYPE i,
         lt_soli TYPE soli_tab,
         lw_soli TYPE soli,
         lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
         lv_name TYPE mime_text VALUE 'sapwebform.htm',
         lv_xstr TYPE xstring,
         lw_raw TYPE bapiconten,
         lt_solix TYPE solix_tab,
         lw_solix TYPE solix,
         lv_filename TYPE string,
         lv_content_id TYPE string,
         lv_content_type TYPE w3conttype,
         lv_obj_len TYPE so_obj_len,
         lv_bmp TYPE so_fileext VALUE 'BMP',
         lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
         lc_doc_bcs TYPE REF TO cl_document_bcs,
         lc_bcs TYPE REF TO cl_bcs,
         lc_send_exception TYPE REF TO cx_root,
         lw_adsmtp TYPE lty_adsmtp,
         lv_mail_address TYPE ad_smtpadr,
         lc_recipient TYPE REF TO if_recipient_bcs,
         lc_send_request TYPE REF TO cl_bcs,
         lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
         v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = v_form_name
    IMPORTING
      fm_name            = v_namef
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language    = v_language
      i_application = 'SAPDEFAULT'
    IMPORTING
      e_devtype     = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
Set output options
lw_output_options-xsf        = lc_true.
lw_output_options-xsfcmode   = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
    EXPORTING
      control_parameters   = lw_control_parameters
      output_options       = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
      job_output_info    = lw_job_output_info
TABLES
      tt_tabh              = tt_tabh
      tt_tabb              = tt_tabb
      tt_tabf              = tt_tabf
EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
    CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
    EXPORTING
      inbuff       = lv_html_xstr
      incode       = lv_incode
      csubst       = lc_true
      substc_space = lc_true
    IMPORTING
      outbuff      = lv_html_str
      outused      = lv_html_len
    EXCEPTIONS
      OTHERS       = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
   EXPORTING
     object_id = 'ZWN'
     object_url = 'ZWN.GIF'
   EXCEPTIONS
     OTHERS     = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
   break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
    lv_diff = lv_html_len - lv_offset.
    IF lv_diff > lv_length.
      lw_soli-line = lv_html_str+lv_offset(lv_length).
    ELSE.
      lw_soli-line = lv_html_str+lv_offset(lv_diff).
    ENDIF.
    APPEND lw_soli TO lt_soli.
    ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
    EXPORTING
      content     = lt_soli
      filename    = lv_name
      description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
    CLEAR lv_xstr.
    LOOP AT lw_graphics-content INTO lw_raw.
      CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
    ENDLOOP.
    lv_xstr = lv_xstr(lw_graphics-length).
    lv_offset = 0.
    lv_length = 255.
    CLEAR lt_solix[].
    WHILE lv_offset < lw_graphics-length.
      lv_diff = lw_graphics-length - lv_offset.
      IF lv_diff > lv_length.
        lw_solix-line = lv_xstr+lv_offset(lv_length).
      ELSE.
        lw_solix-line = lv_xstr+lv_offset(lv_diff).
      ENDIF.
      APPEND lw_solix TO lt_solix.
      ADD lv_length TO lv_offset.
    ENDWHILE.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
    lv_content_type = lw_graphics-httptype.
    lv_obj_len      = lw_graphics-length.
*Add images to the email
    CALL METHOD lc_mime_helper->add_binary_part
      EXPORTING
        content      = lt_solix
        filename     = lv_filename
        extension    = lv_bmp
        description = lv_description
        content_type = lv_content_type
        length       = lv_obj_len
        content_id   = lv_content_id.
ENDLOOP.
TRY.
      lv_subject = lv_subject.
      lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
               i_subject          = lv_subject
               i_multirel_service = lc_mime_helper ).
    CATCH cx_document_bcs INTO lc_send_exception.
    CATCH cx_bcom_mime INTO lc_send_exception.
    CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
      lc_bcs = cl_bcs=>create_persistent( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->set_document( i_document = lc_doc_bcs ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
      lc_recipient = cl_cam_address_bcs=>create_internet_address(
          i_address_string = lv_mail_address ).
    CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->add_recipient( i_recipient = lc_recipient ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
      lc_bcs->send( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM.                    "call_smartforms
End Code --->
Thanks and Regards.

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

How to call a portal KM URL link from WAD template Link

Hi All
I am trying to call a Portal KM URL Link from the web template using the link control.
I cannot figure out whare and how to put the portal KM URL Link into the web application web link.
Your help is greatly appreciated.
Thanks
Karen

Add content administration role to the user.
The the content administration tab would be visible to the user in the main menu tab.
Then in content administration tab, configure the URL for KM URL tab or link.
This would be done by EP experts. Please contact your EP experts to do.
Hope this would help you.

Url link in flash page flip book

I am very inexperienced at what I am trying to accomplish.
I have created a flip book in flash. On a page in the book I made a button that is a link to an external url. When I place the the swift file of that page on my webstie, the link works. I have made a link from my homepage to the flipbook. But when I open the flip book the url link does not work.
Does anyone out there know what's wrong?
thanks

If the flip page the swf is in has interactive code asigned to it, such as whatever you use to flip the page, it could be blocking access to any clickable objects in the swf file.

URL link in the standard Sourcing mails

Hi All,
I am working on Sourcing 7.0 . In my production server scenario we have two URLs Internal and External.
All the sourcing emails will contain the Internal URL (sourcing server) in the mail content for the documents. So user will be not able to access the mail outside.
I want to give external URL in the URL link present in the email content for document.
>How can I achieve this?
>How can i map the internal-external URL so user can access the sourcing email and will be able to open the sourcing documents?
>In the standard email template, is there need to make changes for URL?
Please share your view.
Deepak!!!

Hi Deepka,
First of all correct my understanding on your question, U want to have external (outside) URL in the internal sourcing mails sent??
PLease find the below details in case of mail changes;
1) first of all you need to create a custom mail template for this and follow step2
2) if you want to give some out side URL in the standard conent, you need to maintain the URL itself.
3) FInally associate it with the mail configuration.
Hope this helps, correct my understanding if you are looking for some other enhancements,.
Thanks
Jagamohan

URL Link In Gnome Desktop

Hello,
If I drag an URL from the Firefox address bar to my personal desktop in Gnome an icon is created and I can latter access that site by clicking on it. But when I do that the browser that opens the page is Epiphany rather than Firefox as I expected to be.
How can I change this behavior for the link being open with my favorite browser (in System/Preferences/Preferred Applications I have Firefox set as my default browser)?
Thanks in advance for your help.

Hi,
I think that you need to do the possible development in the ECC backend system - not in Portal/UWL - since as far as I understood from your message, your workflow is in ECC.
You could take a look into this recent thread:
Empty URL Link with SAP_WAPI_ATTACHMENT_ADD
I don't know if it will work in UWL. You could easily test it by adding and URL attachment to a work item in backend (in business workplace) and then see how it looks in UWL and does it work. If it works, you can find a solution in the above mentioned thread or perhaps you can ask further questions from the author of the thread.
Regards,
Karri

URL link to open transaction in NWBC Desktop client

Hi!
I am trying to create an URL link to open a transaction in a role that I am using.
The webpage is shown in a web-chip as a part of FPM page inthe NWBC desktop client.
I have tried this type of concept: https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
The problem is that this opens the transaction in the HTML version of NWBC (inside NWBC desktop client).
However, I would do not want to use the HTML based version of the transaction. I want to use nativ abap transaction inside NWBC Desktop client.
I am able to open the transaction with a link from a webbrowser with this type of link:
sap-nwbc://https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
This link does not open at all from within NWBC....
How do I achieve opening a transaction via URL from inside the NWBC Desktop client?

Hi Stefan,
Same issue i have as well.
My Understanding is, in NWBC desktop, if you open a non sap (eg: html) page, NWBC becomes an IE Browser.
That means you are now out of SAP for that tab (with html page) and whenever you try to launch any SAP transaction (using the method from HTML) it will launch in a new window and ask for Login.
May be Experts like Samuli Kaski & Melinda Ludanyi can put some light on it.
But, I have one more solution for this which is partially working in my case. May be helpful in you case as well.
Issue: From some SAP transaction in NWBC (say tab A), you are launching the html page (say tab B) and then want to launch another SAP transaction (Say tab C) from html.
Solution: Embed the HTML in SAP using HTML Viewer class and launch SAP custom transaction using the interface IF_LSAPI. It will launch it in new tab as a sap transaction with your html page.
Now if you want to launch the SAP transaction from your html page (Which is embedded in SAP custom transaction) you can use HTML Viewer class Events and you can pass parameters as well. Re use the same interface IF_LSAPI and launch it in new tab
In my case i am facing problems as the web developer has so many things on java script and they are not working properly. He is working on it and i am hoping it will be fine.
Regards,
Nik

URL link in send e-mail pl/sql procedure

I have a send e-mail procedure. I am trying to enclose in the body of the message a URL link with parameters from a form, but it is only taking part of it.
for example http://my.link&pid='||pid||'&uid'||uid
it only takes http://my.link
What is the way to do it successfuly?
Thanks,

Thanks for your replies. I still did not get it to work. For example if I stick to your solution with :
urlname := 'my.link?pid='||pid||'&uid='||uid;
where should I stick the try this?
I am using a variable called message.
'message: ' 'click on the following link' ||CRLF || urlname
This is is not working. Any clues? Thanks a lot. Jeanne

URL link in rows/colomns of a report web application designer.

Hi,
I would like to create a URL link in a report which jumps to documents on livelink.
For example:
1. bw    30.000    www. google.nl
2. sap   40.000    www. sap.com
3. basis 50.000   www. nu.nl
etc.
etc.
Do all the rows have different URLS, is that possible in the web application designer? Or do I have to use RRI? Or a user exit?
Thanks for your help en replies.
Rishma.
Edited by: R. Debi on Oct 7, 2010 11:20 AM

I used the RRI already but would like to have a hyperlink in the report. (So, the prefix of the URL is always the same an I have put this in RRI and used the & and contract ID as dynamic part of the URL.)
In a BW web report, our customer would like to display a characteristic value as a hyperlink, so that when clicking on the link, the user is taken to an external website holding a document. SO I am just looking for a javascript perhaps? Or maybe even abap in transformation? To actually create the hyperlink in this report.
Thanks a lot,
Rishma

URL link in MSS/ESS

Similar Messages

Maybe you are looking for