Url mapping table for webdispatcher

I want to use a URL mapping table for the webdispatcher. I found that the paramater wdisp/url_map_location can be used to point at a file://<path>.
But I donot find any information about the layout of this file.

Hi Geert,
As far as i read,
URL mapping table
Mapping of the path part that is specified in the browser to the information about the server (groups).
You can determine, for example, that all requests that contain the path prefix /sap/bc are only processed by the servers that process logon group GROUP_1.
text quoted from SAP Library.
As far as i know you can achieve the mapping you mentioned above using DNS
Regards
Juan
Please reward with points if helpful

Similar Messages

Mapping table for contact person download from ECC and Groupware

There are 3 connected system in our landscape:
- CRM
- Groupware (connected to CRM)
- ECC
We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
1. Contact created in Groupware, flows to CRM ->ECC
2. Contact created in ECC flows to CRM-> Groupware
3. Contact created in CRM flows to Groupware and ECC
Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
Can anyone please advise what are the mapping tables for the address update when the contact is created in :
- Groupware/CRM
- ECC
Regards

Hi Christophe,
Thanks for the response.
I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM

Mapping table for the hierarchies in bw & R3

Hello,
We have a requirement of createing a mapping table for the hierarchies of one of the BW-object and the corresponding R/3-Hierarchies.
sturucture on table should be as given below,
BW-Hierarchy Name | R/3- Hierarchy Name | Frequency of loading |
please advice.
Thanks
NM

Hi,
Product Group is master data for material master. It is part of Matreial Clssification data in R/3.
Please check if you are having the same already loaded as attribute of Material master. I guess it will be there, if it s not there then you should try to load the same in material master object which you are using in all the cubes.
If the maintinenece in master data is nopt possible then you got to populate the same in cube.
There will be a combination of keys (materail/plant/prduct family etc.. ( for which Product group will be unique). then load product with the help of these key combinations in all the cubes via update routine.
There is one more way to have this but which is performance intensive.
You may create one master data object called Product Group and keep material number as attribute (with compunding all other key fileds to get the unique combination). Then you may create an infoset using cubes and this master data object. Join the materail numbers in all. Display this object in report.
I hope it will help.
Thanks,
S

URL mapping config for Experience Definition rule

Hello,
I have a question regarding the configuration of url mappings for experience definitions. Here is our scenario:
We have 2 experience definitions that allow us to localize the guest user experience when a user hits the portal for the first time. We need to setup 2 rules that are based on url so that if a user comes from one url they get the English definition and the other url gives the French definition.
This portal will be access by outside users and we cannot have two different domain or sub-domain names in order to differentiate the 2 urls. We’ve been told that it is possible to setup a system so that 2 different context url can resolve to the actual portal url so that the portal sees the different url values and serves up the proper experience def.
So basically I am asking for a somewhat detailed explanation of how to configure it so we have one of the following 2 setups (whichever one is possible):
English url = http://www.domain.ca/portal/en/server.pt
French url = http://www.domain.ca/portal/fr/server.pt
OR
English url = http://www.domain.ca/portal/en.pt
French url = http://www.domain.ca/portal/fr.pt
And both of these urls would map to the same portal at http://www.domain.ca/portal/server.pt (not directly accessible from outside)
We have the portal deployed via Websphere 6.1 on AIX and using IBM HTTP server.
Any help regarding how to configure app server, web server, portal would be greatly appreciated.
Thank you
Richard

Hi Doevelaar,
sorry, no help but: Iam fighting like you.
I tried the same to get multiple databases to live: no result
I tried to get a connection to configure apex-listener running under Glassfish via SQL-Developer: no Connection possible
I tried to get a connection to configue apex-listener via SQL-Developer : this works if Apex-Listener runs standalone but: I can't store the configuration
I am surely a Oracle-fan with APEX and the DBMS but all installations of Oracle makes me mad.
Try to install the dbms 3 times, it will react 3 times different.
The clone tool of db's works one day, the next one it stops anywhere without any online comment (anywhere in hidden logs you will find a miracle error description.. java-errors self explaining if you know all libaries)
I dont know who ever makes quality checks there but they need any old guy, not the young hackers.
I think Bill Gates has time.
I am so frustrated with all this installation stuff and sh..., i hope one day microsoft buys Oracle, then the installation may be smooth and all features will work.
And you dont have to be a script guru to manage an update, may be. This is naturally only a daydream...
I work like you at this problem, if I have any solution I let you know.
Cheers
me

Sales & Marketing Online MapIt URL Maps feature for Addresses Google Maps

We recently enabled the MapIT URL functionality so our users can see street maps from Yahoo from Sales Online when they click on the Map it icon associated with all addresses in Sales and Marketing Online.
See Metalink 280542.1 for how to enable this in the Ebusiness Suite.
Two questions:
1. We would like to use Google Maps; does anyone know how this can be done?
2. Our business is in Australia. By default we hide Australia as a county on our addresses. This prevents us from seeing maps for addresses in Australia. Any body know a way around this?
Image for clarification can be found here: http://www.orafaq.com/forum/t/90720/0/

Sorry mate looks like it is not straight forward change that you can make to use Google instead of Yahoo.
You may need to use Google Maps APIs and try to build your own URL and update the profile option.
I am hoping in next version of Oracle Apps has out of the box functionality to use Google maps.

Agile PLMA: MDS mapping table for BOM table

Hi,
I'm looking for BOM equivalent table in mds schema.
Currently OBIEE 10g is installed.
It would be really helpful, if you could share the entire schema mappings (Agile to MDS schema).
Thanks,
Prem.

Any hints on this would be highly appreciated.
Regards,
Prem.

Mapping table for SPO

What are the SAP Tables to view:
1. SPO to InfoCube mapping
2. View partioning criteria defined in SPO
3. Partition no to InfoCube mapping?

Hi Nikhil,
You can take help from following links :-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70c8f741-c9f0-2d10-ac90-c8d9f2075e8b?QuickLink=index&overridelayout=true
http://help.sap.com/saphelp_nw73/helpdata/en/d1/468956248e4d9ca351896d54ab3a78/content.htm
Navesh

Mapping table for SIC codes and NAISC codes

A customer is asking if there is a method to map the SIC code to the NAICS code available standard in CRM? If yes, some guidance would be useful.
If not, is there a utility that someone has built to make this mapping? There is a web page dedicated to this at http://www.naics.com/search.htm.
If there other possibilities and suggestions?
Thanks,

only a select amount of users have access to SE16.
I created a quickview w/ LFA1
NAME1 (list)
KTOKK (select & list)
SCACD (list)
**edit**
Had time to re-visit this. The SCAC code is actually in
LFA1-LIFNR and not in LFA1-SCACD.
Thanks again

Partitioned IOT of Object Type - mapping table not allowed for bitmap index

Hi,
looks like a feature available for standard Partitioned IOTs is not supported for object based tables, namely the MAPPING TABLE construct to support secondary local bitmap indexes.
Can you confirm behaviour is as expected/documented?
If so, is a fix/enhancement to support mapping table for object-based Partitioned IOTs in the pipeline?
Results for partition-wise load using pipelined table function are very good, look-ups across tens of millions of rows are excellent.
Environment = Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
OS = Oracle Enterprise Linux Server release 5.2 (Carthage) 2.6.18 92.el5 (32-bit)
Here's the potted test-case...
1) First the non object based Partitioned IOT - data is range-partitioned across the alphabet
CREATE TABLE IOT_Table (
textData VARCHAR2(10),
numberData NUMBER(10,0),
CONSTRAINT IOT_Table_PK PRIMARY KEY(textData))
ORGANIZATION INDEX MAPPING TABLE PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
SQL> table IOT_TABLE created.
2) Create the local secondary bitmap index utilising the underlying mapping table
CREATE BITMAP INDEX IOT_Table_BMI1 ON IOT_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
SQL> bitmap index IOT_TABLE_BMI1 created.
3) Quick test to confirm all ok
SQL> INSERT INTO IOT_Table VALUES ('ABC123',100);
SQL> 1 rows inserted.
SQL> SELECT * FROM IOT_Table;
TEXTDATA NUMBERDATA
ABC123     100
4) Now create a minimal object type to use as the template for object table
CREATE TYPE IOT_type AS OBJECT
textData VARCHAR2(10 CHAR),
numberData NUMBER(10,0)
) FINAL
SQL> TYPE IOT_type compiled
5) Attempt to create an object-based range partitioned IOT, including MAPPING TABLE clause as per step (1)
CREATE TABLE IOTObj_Table OF IOT_type (textData PRIMARY KEY)
OBJECT IDENTIFIER IS PRIMARY KEY ORGANIZATION INDEX
MAPPING TABLE -- we'd like to use this feature to enable use of Bitmap Indexes...
PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
This errors out with the following...
SQL Error: ORA-25182: feature not currently available for index-organized tables
25182. 00000 - "feature not currently available for index-organized tables"
*Cause:    An attempt was made to use one or more of the following feature(s) not
currently supported for index-organized tables:
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
6) Re-running the create table statement in step 5 without the MAPPING TABLE clause works fine. Not surprisingly an attempt to create a secondary local bitmap index on this table fails as there's no mapping table, like so...
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL
Error at Command Line:99 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
7) Creating a secondary local b-tree index is fine, like so...
SQL> CREATE INDEX IOTObj_Table_I1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
index IOTOBJ_TABLE_I1 created.
8) A quick test to ensure object table ok...
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> 1 rows inserted.
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DEF456     500

Thanks Dan,
the intention is to range partition based on the initial character, so A* -> Text_Part_A, B* -> Text_Part_B, and so on.
Here's an example, using an empty IOTObj_Table as created previously.
1) Set up & confirm some test data (two 'D's, one 'N', and two 'Z's)
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DDD111',510));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('N3000',515));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('ZZ1212',520));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
SQL> COMMIT;
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
N3000     515
Z111X     530
ZZ1212     520
2) Just to prove our IOT is enforcing the Primary Key based on the TextData attribute, try to insert a duplicate
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
Error starting at line 141 in command:
INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530))
Error report:
SQL Error: ORA-00001: unique constraint (OCDataSystems.SYS_IOT_TOP_84235) violated
00001. 00000 - "unique constraint (%s.%s) violated"
*Cause:    An UPDATE or INSERT statement attempted to insert a duplicate key.
For Trusted Oracle configured in DBMS MAC mode, you may see
this message if a duplicate entry exists at a different level.
*Action:   Either remove the unique restriction or do not insert the key.
3) Now confirm that our data has been slotted into the range-based partition we expect using the PARTITION clause of SELECT...
- The two 'D's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_D);
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
- The single 'N'...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_N);
TEXTDATA NUMBERDATA
N3000     515
- The two 'Z's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_Z);
TEXTDATA NUMBERDATA
Z111X     530
ZZ1212     520
4) And to wrap up confirm an empty partition
SELECT * FROM IOTObj_Table PARTITION (Text_Part_W);

TABLES FOR MASTER & TRANSACTIONAL DATA

Hi all ,
can some body help me with TABLES FOR MASTER & TRANSACTIONAL DATA
DP,SNP,PP/DP.
Thanks

Hi,
You can find out it as per your requirement.
Use transaction SE80 - ABAP workbench -->
select Repository Information system -->
Select ABAP Dictionary --> Data base table -->
In the right hand side window you will get screen in that give details as below
Standard selection screen
Table name : enter *
In the Application Component:
You will get Tree structure to Select Application Componenet
in that expand the node of SCM --> SCM APO --> SCM-APO-MD for Master Data
Here you will get application -- Double click on the required Application
e.g. Duble Click on SCM-APO-MD-PR for Product
Here you will get list of table related to application componenet Product
<b>/SAPAPO/MATKEY                 Product</b>
Some of the Master Data Tables:
/SAPAPO/APNTYPE                APN Type
/SAPAPO/APNTYPET               Alternative Product Number Type
/SAPAPO/APO01                  APO Planning Version
/SAPAPO/APO01DEL               Deletion Log File Versions
/SAPAPO/APPLOCS                Location Master: Relevant Location Types for Application
/SAPAPO/APPLS                  Application Types : SAP Application Types
/SAPAPO/CD_LOC                 Customizing Change Documents Location
/SAPAPO/CD_PPRFL               Customizing: Change Documents: Product Profiles
/SAPAPO/CD_PRDHD               Customizing: Change Documents: Product
/SAPAPO/CD_PRDLC               Customizing: Change Documents: Location Product
/SAPAPO/CD_PRDLW               Customizing: Change Documents: Storage Type Product
/SAPAPO/CD_PRDWH               Customizing: Change Documents: Storage Type Product
/SAPAPO/CONSPROF               Model Consistency Check: Check Profile
/SAPAPO/CONSPROT               Model Consistency Check: Check Profile Descriptions
/SAPAPO/CUSTCHK                Model Consistency Check: User-Specific Checks
/SAPAPO/CUSTCHKT               Model Consistency Check: Descriptions of User-Spec. Checks
/SAPAPO/GRPTYPE                Product Group Types
/SAPAPO/GRPTYPET               Description of Product Grouping
/SAPAPO/LOC                    Locations
/SAPAPO/LOC_SUB                Mapping Table for Sublocations
/SAPAPO/LOCCOMP                Table Obsolete Since SCM Release 4.1
/SAPAPO/LOCMAP                 Mapping Table for Locations
/SAPAPO/LOCMOT                 Location: Means-of-Transport-Dependent Attributes
/SAPAPO/LOCPROF                Version-Dependent Location Profile for Penalty Determinati
/SAPAPO/LOCT                   Locations Short Text
/SAPAPO/LOCVER                 Location: Version-Dependent Fields
/SAPAPO/LTTYPE                 Location Resources
/SAPAPO/LTVER                  Location Resources: Version-Dependent Fields
/SAPAPO/MARM                   Units of Measure
/SAPAPO/MATAPN                 Alternative Product Number
/SAPAPO/MATBOD                 Product BOD Assignment
Hope this information will be helpful for you work on and find out Important tables for your own BP

Equivalent tables for MARA, MAKT and MCH1 in the EWM system

Hi,
I would like to construct a report using the existing tables in EWM. But it turns out that it's somewhat different from the ECC system.
The material tables, MARA and MAKT and the batch table, MCH1 table are not there. I need the material number( like MARA-MATNR), material description/name(MAKT-MAKTX), the division ( MARA-SPART) and the batch number(MCH1-CHARG) and expiration date(MCH1-VFDAT).
Could someone provide the EWM equivalent for these tables and fields?
Thank you.
Best Regards,

Table Name                     Short text
/SAPAPO/MAT_MTRX               Matrices for Rules of Matrix Generation
/SAPAPO/MAT_RULE               Rules for Setup Matrix Generation
/SAPAPO/MATAPN                 Alternative Product Number
/SAPAPO/MATBOD                 Product BOD Assignment
/SAPAPO/MATEXEC                Product: Execution Data
/SAPAPO/MATGPVAL               Product Group Values
/SAPAPO/MATGROUP               Product Grouping
/SAPAPO/MATINFO                Product Information
/SAPAPO/MATKEY                 Product
/SAPAPO/MATLANE                TS: Master Data Table Product/Lane
/SAPAPO/MATLARES               TS: Master Data Table Product/Lane/Resourc
/SAPAPO/MATLCP                 Materials Lifecycle Stages
/SAPAPO/MATLOC                 Location Product
/SAPAPO/MATLOCPR               Partner-Dependent Location Product Attribu
/SAPAPO/MATLOCTD               Time-Dependent Location Product Fields
/SAPAPO/MATLORES               TS: Master Data Table Product/Location/Res
/SAPAPO/MATLOTSZ               Lot Sizes & Days' Supplies for Material Ma
/SAPAPO/MATLPL                 Location Product Planner (with Planner Typ
/SAPAPO/MATLSIM                Location Product with Planning Version
/SAPAPO/MATLSINH               Location Product with Inheritance
/SAPAPO/MATLSPP                SPP Relevant Location Product Attributes
/SAPAPO/MATLWH                 Location Product for Location Warehouse
/SAPAPO/MATLWHST               Location Product for Location Whse and Sub
/SAPAPO/MATMAP                 Mapping Table for Products
/SAPAPO/MATMOD                 Model assignment of location product
/SAPAPO/MATNR_V                MATNR for Foreign Key Checks
/SAPAPO/MATPACK                Product: Packing/Packaging Data
/SAPAPO/MATPPM                 TS: Master Data Table Product/PPM
/SAPAPO/MATPRIO                Product Priority Time & Version-Dependent
/SAPAPO/MATPRMRM               Alternative units of measure for partner p
/SAPAPO/MATPRT                 Partner Product Master Data
/SAPAPO/MATPRTXT               Partner product description
/SAPAPO/MATRELH                Product-Relevant Hierarchies and Hierarchy
/SAPAPO/MATREPC                Replenishment Control
/SAPAPO/MATREPCT               Replenishment Control
/SAPAPO/MATRES                 TS: Master Data Table Location/Resource
/SAPAPO/MATRGPT                Product Regional Pattern Assignment
/SAPAPO/MATRQ                  Requirement Profile in Material Master
/SAPAPO/MATRULET               Text Table of Rules for Setup Matrix Gener
/SAPAPO/MATSBOD                Product BOD Assignment with Planning Versi
/SAPAPO/MATSTOCK               Stock Information
/SAPAPO/MATTXT                 Material Descriptions

Tables for Catalog details...

Hi,
I'm new to CCM. Can any one let me know the details of the tables or reports where I can find the following details:
1. Catalogue Number
2. Date on which catalogue was created
3. Who had created the catalog.
4 Whether any changes were done for the catalogue
5. When the changes were done & who had done the changes.
It will be really helpful if any one can send me the material on CCM.
Wishes & Regards,
Mahesh. J

Hi,
All the CCM tables are stored under Table names </CCM/>
You can also check these reports in SE38... There are more of them, do a search on /CCM/*
Report Name Description. Attention / additional hints
/CCM/CLEANUP_CATALOG Deletion / Cleanup of catalogs. May be dangerous since all catalogs can be deleted via this report! The report is needed if an upload crashed in order to delete the temp. version of the uploaded catalog.
/CCM/PATCH_CATALOG Needed if data migration was necessary between two support packages in order to migrate the data.
/CCM/VERIFY_CATALOG Prints out a list of the database content of a catalog.
Options on the selection screen for Item valuations, includes deleted objects, views etc.
/CCM/CATALOG_CME_DATA Shows the predefined characteristics / data types
Shows the characteristics / data types of a catalog.
Can be used to check the data (e.g. alias, aspects) of predefined characteristics
/CCM/VISUALIZE_MAPPING Displays the mapping tables for a given catalog ID
/CCM/INITIALIZE_CME Initializes the predefined data types / characteristics. Used to initialize the catalog
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Tables for - SAP BI Transformation

Hi,
I would like to know the table names related to BI transformations.
I need to document the transformations, do we have any table to findout the how the info objects mapped from source to destination.
Thanks in advance

Hi prassana,
YOu get the list from se11 --> type -->RSTRAN* ->click F4.
please find some ofthe tables below
RSTRAN     Transformation
RSTRAN_R_CURR     Currency Translations for Transformation R
RSTRAN_R_IOBJ     InfoObjects for UnitTest Transformation Ru
RSTRAN_R_TEST     UnitTest Transformation Runtime
RSTRAN_R_UNIT     Unit Conversions for Transformation Runtim
RSTRAN_RTO     Runtime Object of Transformation
RSTRAN_RTO_HDR     Header Information for Transformation Runt
RSTRAN_STEPTPL_R     Runtime: Template STEP Type Relations
RSTRAN_STEPTYP_R     Runtime: Sections for STEP Type
RSTRANAPPEND     Assignment of Transformation - Appends
RSTRANENQ     Lock Entries for Transformation
RSTRANFIELD     Mapping of Rule Parameters - Structure Fie
RSTRANFIELDPROP     Field Properties Within Transformation
RSTRANGROUPT     Transformation Texts
RSTRANIF     Table for Source/Target Interface
RSTRANROUTMAP     Rule Type: Routine
RSTRANRULE     Transformation Rule
RSTRANRULE_TEST     Mapping Table for Single Rule Simulation
RSTRANRULESTEP     Rule Steps for a Transformation Rule
RSTRANRULET     Texts for a Transformation Rule
RSTRANSEG     Used segments
RSTRANSTEPCNST     Rule Type: Constant
RSTRANSTEPIOBJ     Rule Step: InfoObject Assignment
RSTRANSTEPMAP     Mapping for Rule Step Within a Rule
RSTRANSTEPMASTER     Rule Type: Read Master Data
RSTRANSTEPMOVE     Rule Type: Direct or MOVE
Regards
Prashanth K

Importing mapping tables via txt-file

Hi
Is it possible to import mapping tables for some dimensions using txt- or csv-file instead of excel-template?

Yes.
There is a format called "Ledger Link" which is dirt simple. It is a CSV file that has Source, Target, and Description. If you have a sign flip, you put a - in front of the Target. If instead of explicit map, it is a like, Source is the rule.
For example......
110011,3rdPartySales,Third Party Sales
110021,-ICSales,Intercompany Sales
11003?,ServiceRevenue,Service Revenue for Accounts starting with 11003 with a length of 6 characters

How to Fill Setup tables for MAP (IS- Retail)

Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
Naresh

Hi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh

Url mapping table for webdispatcher

Similar Messages

Maybe you are looking for