URL name protocol question

Hello forum.
Im a newbie to Microsoft Azure, and giving it a trial basis. I'd like to know regarding my websites url.
Im installing a wordpress theme, and Id like know if my website will be ending in: .com ( I have bought a domain name ending in .com.au)
the reason Im asking is because Im following a tutorial how to set up wordpress via Mic Azure, and the instructor is getting a .net
in the end of his url.
Thank you.

Hi,
As you informed about purchasing your own domain, you may refer the following link to setup custom domain for the Wordpress blog in Azure:
http://www.davebost.com/2013/07/11/moving-a-wordpress-blog-to-windows-azure-part-3-setting-up-your-custom-domain
Regards,
Manu Rekhar

Similar Messages

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

How can we navigate from URL Name like (Youtube) to the actual website

Hi,
We have two columns in our report i.e URL NAME and Actual site.
In URL NAME column, we have YOUTUBE,GOOGLE etc.
In Actual site, we have www.youtube.com,www.google.com etc.
How can we make user navigate by simply clicking the URL Name GOOGLE to the actual website www.google.com.
Can it be possible?? Please help!
Thanx.

Hi,
Thanks for the reply..
The solution provided is not working. It is showing the error-
[nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <<>: Syntax error [nQSError: 26012] . (HY000)
SQL Issued: SELECT Dashboard_Fact.SDBusiness_Area_Comment, Dashboard_Fact.SD_Status, SDBussiness_Area_Dim.SDBusiness_Area_Name, SDLink_Dim.SDLink_Url, VOCBusiness_Area_Dim.VOCBusiness_Area_Id, case when SDLink_Dim.SDLink_Url is not null then <a href = http:// SDLink_Dim.SDLink_Url /a> FROM service_delivery
Actually its not even taking the case statement in the name column.There is some error in the syntax i suppose.

IWeb - URL name problem

Quick facts: I have created a website on iWeb. I am going to host this site using Mobile Me. I have purchased a domain name on Go Daddy. I changed the CNAME on Go Daddy to web.me.com
On iWeb when I publish my site, it appears to publish just fine. The problem is that it duplicates the URL name. Instead of www.mydomain.com, it reads www.mydomain.com/www.mydomain.com. When I navigate to www.mydomain.com, nothing comes up. But, when I type in www.mydomain.com/www.mydomain.com, my website comes up.
Has anyone had this problem, and how have you resolved it? I am new to all of this, so if I have not used the proper terminology, please feel free to correct me. Any suggestions are appreciated. Thank you!

Thank you for your response. This was somewhat helpful, and I did re-name the site as you suggested. However, I am still having the same problem in that if I simply type in www.mydomain.com, I cannot get to my page. I have to type www.mydomain.com/xyz in order to get to my page.
I have gone to Go Daddy to try to get it to forward from www.mydomain.com to www.mydomain.com/xyz, but that does not appear to be working.

Assert domain name protocol error?????

I have just updated to the latest update of Muse.
I went to FILE - EXPORT HTML which I normally do, so I can copy files into a folder
It starts to download the files for the web and at the very end of the process Muse crashes
and I get this message
An Error Has Occurred
Assert domain name protocol error
Dont know what to do, hope you can help???
Many thanks
Tim

Hi Sam
Attached is a zip file that contains screen shots of the export boxes, and error message.
The first two, which had http:// plus variations on the web dom name failed. The 3rd which merely had the domain name no http//: exported without any problem.
I hope this helps. If you need anything else please do not hesitate to contact me, as I like the programme and wish to help in any way to assist re bugs.
Regards,
Tony

Cache, filename, url name, automatically

i use foxit reader open a pdf file, the final '''''url name''''' is xxxx.pdf, when i click the save or save as i get s'''ome strings '''as the fileneme for example, 529EDd01.pdf. the same as the name in the '''cache folder'''. So i think , first the pdf file xxxx.pdf is saved in cache , changed name as 529EDd01, then the foxit reader open it. then the name could never the same as the url name xxx.pdf.
i wonder could i change the saving name in cache automatically or
is there another way to solve this problem, (mimetype do not work).
(for the firefox browser is closed the cache would been deleted, so security is not considered much). Thanks for your attention. thanks very much for trying to solve the problem, for it bothering me too much.

I do not use foxit reader but most things allow you to choose or edit a filename when saving a file. If you download and save a file with Firefox you should get the opportunity to name the file.
If necessary
# disable foxit reader (Tools -> Add-ons)
#then navigate to the .pdf <br/>and Firefox should then have nothing suitable to open the file with and so will offer to save the file.
You appear to be using an insecure and outdated Firefox 7, you should update to Firefox 12, and also check and update plugins and add-ons.
The latest versions of Ffirerox will open .pdf files but you are still able to download and save them see
* [[Opening PDF files within Firefox]]

How to show url name

Hi
I want to show url name (www.java.com) on applet.When some one open a url on internet explorer then show only url name on applet.I need example.
Plz help me

Why do you want to do this? I'd say that the applet isn't allowed to access that information.
Kaj

Site name -- ridiculous question

Hello all,
I'm using iWeb for the first time. I have a question about naming the site I have created. I understand how to change the name from the generic "Site 2" to my own name, but in naming it, do I name it "Mywebsite" or "Mywebsite.com"? I plan to publish my site to a folder and upload it via FTP to a webhosting service. This seems like a ridiculous question, but I can't find information on it anywhere.
Thanks for your help!
MacPro Mac OS X (10.4.9)

in naming it, do I name it
"Mywebsite" or "Mywebsite.com"?
The shorter the name, the better. If you give it the same name as your domain name, your urls as they appear in the browser will not look very pretty.

Line protocol question

Okay, this might seem like a really stupid question but it's got me stumped.
What the hell does "line protocol down" mean and how the hell do I fix it? I'm using a Cisco 2500 series router, and it's occuring on serial port 0 on BOTH routers. I've checked, double checked, re double checked, and triple checked (quadruple checked?) the wiring and the physical wiring is fine...
Can anyone provide any insights to this at all for me? I'd greatly appreciate it.
TIA

The line protocol state (up or down) reflects the layer 2 status of the interface. If your serial interface is saying that its state is up/down it means that it knows that it is plugged into something on the interface but that there is a layer 2 connectivity problem.
The nature of how the router determines the layer 2 status depends somewhat on the type of interface. On Serial interfaces the determination is based on the keepalives. So basically what the router is saying is that keepalives are not working on the router. There are a couple of things that can prevent keepalives on the serial interface, such as different protocols being configured (one end may be Cisco HDLC and the other end is PPP). If it was Frame Relay a mismatch of LMI type may cause it. Given your comment about using 2500 and that both sides are showing protocol down I am going to guesss that you have the routers configured back to back. And I am going to guess that you have not configured clock rate on whichever router has the DCE serial cable connected. When routers are back to back and do not connect to provider equipment, you need one of them to generate clocking (and it needs to be the one with the DCE cable). So check your cables, find which one is DCE, and configure clock rate on that router.
HTH
Rick

Playlist name sorting question

First off, sorry if this has been discussed before, I couldn't find it anywhere.
My question is, is there any way to sort my playlists via a "Sort Name" option or something so that a playlist starting with 'the' (for example, "The Letter Black") will be sorted, in the case of the example, under 'L' instead of 'T'? Thanks in advance.
Blessings.

Sorry, there are no controls about the sort order of playlists. They go folders, smart playlists, and regular playlists, with a lexical sort in each.
However, you don't need to create playlists for individual artists and albums. You can easily get to them by the column browser. To turn it on, click View > Column Browser > Show. Then type "lett" in the search bar and you will be right there.

Multiple JDS as a name serivce question

I have three JDS (5.2) running as a naming service for host and user authentication: one master, and two slaves. My problem is that the ldap servers themselves point to another ldap server for information. So when I take one server down (patching) everything pointing to that server (ldap1) goes down, and everything pointing to ldap2 (which uses ldap1 for a naming services) goes down as well. The basic effect is I lose 2/3 of my applications.
I read an LDAP server can not point to itself for authentication. Do I just need to remove the ldap client and run the ldap servers old school (local accounts)? Or is there another solution?
I do have normal hosts (non-LDAP servers) pointing to a VIP (virtual IP). Do I just need to treat my LDAP servers the same?

No, I'm not saying that.... I guess I should have spelled out the "clients" comment a little more.
I have all (well, a majority in the 90% range) of my clients pointing to a Cisco CSS VIP which is really all three of my LDAP servers. This way LDAP queries should never go down. I've tested this on indivudal servers and it appears to run nicely.
The problem is with my LDAP servers, and their LDAP client configurations. The axiom I'm using is: "you can not point an LDAP server to itself for name service resolution". Would pointing the LDAP servers to the VIP break this axiom?
Right now they are pointing to other LDAP servers than themselves. And when one goes down for patching (ldap1), the other LDAP server that is using it (ldap1) for it's name service resolution will also go down; effectively shutting down 2/3 of my applicaitons.
This is really a check-egg type of question.

Modal JDialog protocol question

Hi!
Let's say I have a properties dialog, and it has an ok button and a cancel button.
If the user presses the ok button, then the parent form knows that there are a bunch of properties it needs to update based on what was set on the properties dialog.
My question is this:
What is the protocol in Java for letting the parent form know whether the "ok" or "cancel" button was clicked?
I'm used to other languages like C# for instance, where you have an enumeration called DialogResult. You can set any dialog's DialogResult value to OK, Cancel, etc etc. Then the parent form knows exactly what happened.
I can't seem to find any uniform way of handling this in Java - so I was wondering if I may have overlooked something.
Thanks for any replies - and please remember, I'm looking for a standard here, not for suggestions. I've come up with my own ways already - but would just like to be more consistent!
Thanks a bunch!

Joel,
This is what I know of JDialog. The calling thread will continue execution after the show() execution point right after the Dialog is disposed. Normally I use one attibute in my custom JDialog which is called cancelled and is set when the user presses the cancel button or disposes the window. In code this would be something like this:
boolean modal = true;
CustomDialog cd = new CustomDialog(modal);
cd.show();
// User changes preferences in dialog, thread waits
if(cd.cancelled)
// User pressed cancel
else
// save settings
greetz

Disjoint name space question

I'm working with an organization where the Active Directory domain name and primary DNS suffix are both:
wxyz.com
For some reason, the NetBIOs name of the domain is:
XYZ
So users can logon with this NetBIOS name\username combination:
XYZ\jsmith
Technically, I believe this is a disjointed namespace.
Question: is any remedial action necessary before migrating from Exchange 2007?
I see that for other disjoint namespace scenarios, one would have to modify the msDS-AllowedDNSSuffixes attribute on the domain controller container or adjust the DNS suffix search list.
Since this is a NetBIOs name (not DNS), is there anything to do?
I've looked at a number of sources (for Exchange 2010 and 2013)...
http://technet.microsoft.com/en-us/library/bb676377(EXCHG.140).aspx
http://technet.microsoft.com/en-us/library/bb676377(v=exchg.150).aspx
But don't see any action to be taken for a NetBIOS name.
This discussion seems to imply that there is no problem:
http://social.technet.microsoft.com/Forums/exchange/en-US/13f9b284-87a2-4d0b-8a56-1e336414ed53/disjoint-namespace-netbios-name-question?forum=exchange2010
Thanks in advance!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

I'd still follow the points that are listed in your article David. This is in the Exchange 2013 post.
Scenario: NetBIOS name of domain controller differs from subdomain of its DNS domain name
It does ask for the additional steps to be taken, and while it may work without I would not go against the documentation.
The other thing you can do, is to do a cross forest migration to a new forest that is not disjoint. I know that is a lot of work but then you will not run into these issues. The same thing applies for customers who have a single label domain.
It's DNS name is not "contoso.com", the DNS name is "contoso". Yes you can do that, but it is not a good place to be in.....
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Copy Function Group to New Name: Transport Question

When I did this I only see in the transport Function Group with the Function Group Name under it. I would have expected to see all of the objects but I guess not?
I suppose everything will go under thge Function Group name? ie. Includes, Function Modules, etc.?
Thank-You.

When I see a thread title like this, the first question I think is "Why copy the function group".
Copying a complete function group leaves your system very open to future data corruption and other problems as patches etc change the code in the original group but do not get reflected in your copy. A repair or enhancement to the original object has the advantage that SPAU will highlight any new versions from SAP allowing you to confirm that your change is still needed.
Another option is to create a custom function that calls the standard code with customer specific pre and post processing. If both the standard and custom function are needed, then including logic based on transaction code, calling report, etc can handle this.
It is interesting to work on the upgrade of a system where there has been significant copying of SAP code - you compare the "Z" version with the original SAP code in the pre-upgrade system and nearly always find differences due to OSS notes etc that were applied without thinking of the customer copy.
Andrew

Podcast Name Change Questions

Hello,
I've had an all-Canadian Music Podcast out for a year now and it's done well for a small podcast. However, I've decided to make some changes in hopes of reaching more listeners and a name change is being considered. I have a few concerns before doing this, so hopefully you guys can help.
Over the past year the show has surprisingly received 74 ratings and a lot of really nice reviews in iTunes. It has also found it's place in the iTunes "What's Hot" section and has stayed there for 6 months or so now. My concern with a name change is loosing ratings/reviews and the feature in What's Hot. It takes a lot of hard work to get recognition in iTunes and I don't want to throw away a year of efforts that made these small victories happen.
So, will changing the name have any effect in iTunes?
I use Libsyn as my host server and from there, changing the name is a simple process. I just want to make sure things won't change drastically in iTunes.
Thank you in advance for your help with this question!
Cheers!
Mike

There shouldn't be any problems. There may be a bit of a delay before the change appears in the Store but it won'ot affect anything - the basic identifier of the podcast is its ID number.

URL name protocol question

Similar Messages

Maybe you are looking for