URL not valid error message

I have been successfully downloading podcasts for several months now and just a few days ago I clicked on "update" to get my daily dose of podcasts and each one gave me an "!". When I clicked there to see what the problem was, I got the "invalid URL" message. It makes no sense that ALL (a dozen or more) podcasts I get would suddenly have bad URL's and as I verified them, they were not bad. So what's the problem? I can't figure it out. Please help if you can. And thanks.

I believe I fixed this problem in my iTunes. I literally had to reset all my podcast subscriptions. First checked all the URL's by clicking on the (I) button to the right of the podcast listing. Then I did a search on Google for the podcast and found it and rather than subscribing, I cut and pasted the correct URL for RSS feed into the "Open Stream" window that you can get to through the Advanced menu. Then I ubsubscribed to the current version of the same podcast and downloaded what I wanted. That seems to be working so far in terms of updating them. No "!" marks! Good luck.
iBook Mac OS X (10.4.4)

Similar Messages

"Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

Is anyone else getting this error message, "Entitlements are not valid", when trying to sync .ipa file from iTunes to iPad?
The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
So, I have a swf file that works and was able to publish it into the Android Market. I then compiled and build the same flash project with the Packager for Iphone into an .ipa file. But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message.
I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
Any help would be appreciated. thank you.

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

KI222 - Inappropriate Cost Center Not Valid Error Message

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

Hello,
Go to OKKS and set your controlling are correct.
Then go to KS03
See the from validity. If there from date is in past then there should not be any issue.
Make sure that your entry is using current date not old dates in the data using BAPI
You can switch off the message for the time being.
Go to OBA5 and application area KI and message number 222.
Switch off the message for online and batch entries.
This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
Regards,
Ravi

SQL Server SSIS SQL Agent Job Receiving "Option -Daily" is not valid. error message SQL Server 2008 R2

I have seen this error posted on msdn before but this seems to be a bit different. Same story. When I exec a SSIS package in BIDS it succeeds. When I run it as an agent job it fails with the error "Option -Daily" is not
valid.
Here is the script that SQL Server "New Job" wizard created.
/FILE "C:\Development\SSIS\Daily Report\bin\Daily Report.dtsx" /CONNECTION FlatFile2; "C:\Development\SSIS\Daily Report\base_daiily.csv" /CONNECTION "localhost.database";"\"Data Source=localhost;Initial Catalog=database;Integrated
Security=True;Application Name=""SSIS-Daily Report-{5786B48C-481E-9951-B486486231AF}localhost.database"";\CHECKPOINTING OFF /REPORTING E
I had to clean the above up a little bit to block restricted information. The error suggests that SQL Server is having problems parsing the string the wizard created. Any thoughts regarding what is occuring here.
Just my thoughts tomh

why would you use new job wizard?
Just create the new job and a new SSIS step in it.
The error message looks like too abridged, but the issue actually might be with the parts
Application Name=""SSIS ...tabase"";\CH
Quotes after quotes
Arthur
MyBlog
Twitter

Key not valid error message when trying to download software

i cant download software for my envy 5532 keep getting error message ( key not valid for use in specified state ).
This question was solved.
View Solution.

This problem is related to Microsoft Update KB2918614
The fix is to remove this update.
How to remove a Windows Update in Vista
If the fix works I recommend that you 'hide' it so that it doesn't get reinstalled automatically.
Instructions below:
If you don't want Windows to install an update, you need to hide it.
Open Windows Update by clicking the Start button . In the search box, type Update, and then, in the list of results, click Windows Update.
In the left pane, click Check for updates.
When Windows finds updates for your computer, do one of the following:
Click the link that tells you important updates are available if you have important updates to hide.
Click the link that tells you optional updates are available if you have optional updates to hide.
Right-click the update you don't want to install, and then click Hide update. The next time you check for updates, the update won't be automatically selected or installed. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

DV-3060us - Getting "Product information not valid" error message

Had to have the Graphics chip replaced yesterday. I'm out of the country at the moment, and I guess the tech here does not know how to reprogram system/product info onto the board after changing the chip, and I can't explain it due to the language barrier. What can I do? Here's the entire message that comes up at startup:
"Product information not valid
the following product information programmed into the system board is missing or invalid
System Board (00A)- Product Name
Product configuration
Product serial number
product number
Enter to continue Startup
for more information visit
www.hp.com/go/techcenter/startup"
I have gone to the HP site as directed, and it says this: "You may see this message after you send your computer in for service. It indicates that a technician replaced the system board or component but failed to input the new serial number in the system.
To resolve this issue, contact HP for further assistance. You will be asked to provide the fourteen digit System Board Commodity Tracking Number (CT) that is included in the error message."
There is *NO* tracking number being displayed where it should be, and I have no idea what to do. But I need to try to resolve this ASAP, as I need to reload drivers for the CD/DVD player in order to do a presentation and it won't let me do anything.
Please HELP! Thanks for your assistance! I'm waiting to hear something! :-)
This question was solved.
View Solution.

HP has a tool to do that. Here is a link to contact HP world wide:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Credit Card number not Valid" error message

Hi ,
While we are trying to test our pilot, we have configured the Preauth in our Credit Card process. I have given the Credit Card number ranges for VISA and Master like /5100000000000000 to 5199999999999999, and 40000000000000000 to 4999999999999999. Rest of the other config is maintained.
I could add 4111111111111111 to one of the customers in the customer master , but when I try to add a number to another customer 4000234016729199, I get a error message " Card Number not Valid "..I checked the Checking groups it is all fine.
Please let me know if I missed something .
Thanks
Ravi

Srinath
Thanks for your reply.
I tried the option but still it gives me the same error.
The config is as below:
1.Payment Card Type - VISA - CCARD_CHECK_VISA (assigned)
2.Defined Card Categories MC/VISA/AMEX/DISC
3.Determine Card Categories - VISA/1/BT/ 4000000000000001/4999999999999999/VI
And the rest of the config is maintained.
Do you think any other area/assignment I would have missed?
OR 49999999999999999 is a bad number?
I am not knowing what please let me know.
Thanks for your help in advance.
Ravi

Anyone having "URL not valid" error from Live Monitor?

I sent a support email to MSI, but they are on vacation till the 5th. I was just wondering if anyone else has encountered this issue. Below is the message to MSI support:
Quote
MSI Live Monitor has started to behave strangely. Yesterday I clicked auto-search and the dialog box came up as normal, I clicked "next," and an error message came up with the heading "LMonitor" and "The url is invalid." So, I closed it and restarted Live Monitor. I tried it again and received the same error message. I uninstalled Live Monitor, (I didn't delete a file Windows stated as shared) and downloaded Live Monitor from the website. Installed Live Monitor, started it from the installation, and ran auto search. It worked this time. But, I then tried it again, and again, the same error message occured. I rebooted, and tried auto-serch again--once again, the error message occurred. Anyway, prior to yesterday it seemed to be working fine. I did a second uninstall, and re-install. Again, it worked one time and the second time the error message occurred

CCB33,
I haven't received a response yet, but MSI has only been back since the 6th, and after that kind of time out I bet they have a lot of emails to answer. Funny thing about your post on this thread. Just before I read it, I tried MSI Live Monitor and had the same thing ocurr. So, I uninstalled it, reinstalled it and it worked the first time. I then crossed my fingers and toes, exited the program, restarted the program, tried auto-search, and IT WORKED! No error message appeared. I exited again, and restarted the program -- it worked again. Woohoo! This time after exiting the result window and the program still running, I then tried the auto-search which worked yet again. It seems it's functioning now. If I were you I'd uninstall the program and reinstall it again(I downloaded it from the MSI website ( http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_liveupdate.php ). I'll try it again tomorrow and see if it still works.
Edit: This morning, USA eastern time, I tried it and it worked. This afternoon I don't get the error but a message stating the server may be busy or no internet connectio. Seems to be working fine now.

Sir Please Help Me With My Homepage. When I Set My Home Page To About:home It Gives An Error Saying Url Not Valid... Please Tell Me how to Fix this!

Question
Sir Please Help Me With My Homepage. When I Set My Home Page To About:home It Gives An Error Saying Url Not Valid... Please Tell Me how to Fix this!

I'm not seeing a screenshot, so could you please try another time to attach one?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Make sure that you use the location bar and not the (Google) search bar.
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

Interactive Report validation error messages...

Hi guys!
I was looking for answer to this question for a long time now...is it possible to change the validation error messages in interactive report?
With regards,
PsmakR

Hi,
there are more validations than you think. Anthony Rayner has prepared a nice summary in a [url http://anthonyrayner.blogspot.com/2010/08/apex-40-enhancements-validating-form.html]blog post.
You see in that post where and how to disable validations, but also, that you may not disable all of them. The only way to avoid all validations would be to implement the report yourself completely.
The good news is, you can overwrite those messages. The following documentation tells you how to:
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/global.htm#CHDEDHBJ
-Udo

Validation error message in a confirmation box.

To provide any validation error messages i am using the throw OAException, but that displays at the top of the page where many times users dont even notice it. i want to be able to instead display the error msg in a confirmation box that has just the OK button to make sure user has seen the message......
how do i do that ? (i do not want to use the DialogPage becos that takes me to another page and also is not for raising exceptions).
thank you.

Hi,
You have to use OADailogue region to achieve this. Please follow below code units to create a dialogue page and display an error message.
OADialogPage dialogPage = new OADialogPage(OAException.WARNING, message, null, "", "");
String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
dialogPage.setOkButtonItemName("DeleteYesButton");
dialogPage.setNoButtonItemName("DeleteNoButton");
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setRetainAMValue(true);
dialogPage.setPostToCallingPage(true);
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("foo","value");
dialogPage.setFormParameters(formParams);
pageContext.redirectToDialogPage(dialogPage);
Thanks
Bharat

Cannot install OSX 10.4 (no valid error message) - why?

Hi everybody. I've been trying to install Mac OS X 10.4 on this G4 Quicksilver, but it seems that it's impossible. When I boot from the CD, it tells me "Mac OS X 10.4 cannot be installed on this computer" and promptly tells me to restart. It doesn't really give a valid error message, not even in the install logs.
I've currently got Mac OS X 10.2.8 installed. Another issue may be the fact it's fitted with 1 GB RAM that runs on a different speed than the other 1 GB, but I doubt it. I really wonder why I can't seem to install the new system, since I seem to meet the requirements pretty easily.
Thanks for your help.

Hi gja,
first of all: WELCOME TO THE DISCUSSIONS!
Most disk sets sold on eBay or similar sites are hardware specific software install disks. You CANNOT use hardware specific software install&restore disks that shipped with another computer. These simply do not contain the hardware drivers for any other computer model but the one they originally shipped with. You have to buy the retail full install DVD.
Besides this technical limitation it would also be ILLEGAL (unless you can guarantee and prove that the original owener completely erased it from his computer). Apple's Software License Agreement states in point 2:
2. Permitted License Uses and Restrictions. A. This License allows you to install and use one copy of the Apple Software on a single Apple-labeled computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time,...

Validation error message in JSF 1.2

I am testing my Web application inside Tomcat 6.0.2 and using JSF 1.2. I was surprised to see that validation error messages do not only display the custom error message, but also the id tag and a "Validation Error: " text. For instance, if an input text component has the required property set to true and the user does not fill in value, the following error message will be displayed on page submiision: "hello:test: Validation Error: Value is required." instead of just "Value is required.". I am wondering if there is a way to silence the id tag and the "Validation Error: " text. hello:test id tag reflects the fact that the form has an id of "hello" and the input text component an id equal to "test".

Hello
I'm quite new to this technology. Would like to know how can we replace the 'annoying component id' with label while generationg validation/conversion error message.
E.g:
'for:compID' some error message
must be formated as
'compLabel' some error message
I happened to know that this feature is supported in JSF 1.2 impl. But didn't work for me with Sun RI.Can any body give me some sample code snippet for the same
Thanks
Jobinesh

Object in URL not valid

Hello,
I hope that someone can help me with my problem:
I have a BSP-Application where I have attachments.
and if I want to show one attachment i most of the time get the error object... in URL not valid.
For example: BSP Exception: Das Objekt 7D49254945056D07E100000080010A92 in der URL /sap(bD1kZSZjPTAzMw==)/bc/bsp/sap/zrdv_benuantr/7D49254945056D07E100000080010A92 ist nicht gültig.
But sometimes (after 10-15 attempts) it works...
The attachments are Excel-Sheets or Word-Dokuments.
in OnInitialization:
IF DO_DOWNLOAD = 'X'.
CREATE OBJECT CACHED_RESPONSE TYPE CL_HTTP_RESPONSE
EXPORTING ADD_C_MSG = 1.
CACHED_RESPONSE->SET_DATA( W_ATTA-ATINH ).
YWORK = W_ATTA-FCOTY.
CACHED_RESPONSE->SET_HEADER_FIELD( NAME =
IF_HTTP_HEADER_FIELDS=>CONTENT_TYPE
VALUE = YWORK ).
CACHED_RESPONSE->SET_STATUS( CODE = 200 REASON = 'OK' ).
CACHED_RESPONSE->SERVER_CACHE_EXPIRE_REL( EXPIRES_REL = 60 ).
CALL FUNCTION 'GUID_CREATE'
    IMPORTING
      EV_GUID_32 = GUID.
CONCATENATE RUNTIME->APPLICATION_URL '/' GUID INTO CACHED_URL.
CL_HTTP_SERVER=>SERVER_CACHE_UPLOAD( URL      = CACHED_URL
RESPONSE = CACHED_RESPONSE ).
ENDIF.
Layout:
if do_download = 'X'.
        window.open('<%= cached_url%>','BV_Anlage_anzeigen');
endif.
Thanks for your help
Helmut

Hi,
I guess you will find the entry everytime in the server cache, but only in one of the four application servers. So your applications works only in the few cases that the request to the URL is routed to the server where the cache-entry exists.
I don't know if there is a possibility to share the cache between the application servers. You may find further informations in SAP Help: http://help.sap.com/saphelp_nw70/helpdata/en/d7/446f3b19d99b0de10000000a11405a/frameset.htm
Instead of server cache you can also use the response object to provide the attachment:
* set the mime-type and file size in the response
          runtime->server->response->set_header_field(
            name = 'Content-Type'
            value = value_mime_type ).
          runtime->server->response->set_header_field(
            name = 'Content-Length'
            value = value_length ).
          runtime->server->response->delete_header_field(
            name = 'Cache-Control' ).
          runtime->server->response->delete_header_field(
            name = 'Expires' ).
*         set response data to be the file content
            concatenate 'attachment; filename=' attachment-name into value.
            runtime->server->response->set_header_field(
                             name = 'content-disposition'
                             value = value ).
            runtime->server->response->set_data( hex_content ).
          navigation->response_complete( ).
Best regards,
CW

"Multiple Validation errors" message when creating new project in FCPX

As a test I have now managed to change the file format from older quicktime file to .m4v and import into FCPX. I had to use Handbrake to change the file format to .m4v. If a free software can do this then why can't the $300 FCPX - and allow me to import directly? This would save me MANY hours of extra work!
But then, when I try and edit this - first trying to create a new project I get the message "Multiple validation errors occurred" The same message even if I try and custon settings rather than use the default
Does this mean that after all the work and hours it took me to tarnscode the file format, import and then render etc - I will be unable to use FCPX - to edit this footage?

Update on trying to create a new project - and getting "Multiple Validation errors" message
I quit FCPX and tried to use iMovie to make a clip to send to you. Decided against this - and so I opened FCPX again
To my surprise there were now over ten projects - as every attempy had appeared! This is bizarre - why did they not show up when I tried to create them first?
So, I had to delet most and just use one. This appears to be working as a project and is allowing me to edit clips into it.
It will be a reall bummer though if I have to do this every time I need to create a new project!

URL not valid error message

Similar Messages

Maybe you are looking for