URL Parameters in KM Search iView not accepting spacial characters

I have created an iView that shows standard search.
When accessing the search iView, I use an url. To specify the search query, I add QueryString=[search query string] to the url.
Problem is that if my search query contains the danish characters æ, ø or å, then they are replaced with �.
I have a text field on a 3'rd party component where user input the search string, and i have tried to encode it with the javascript function escape() and this does not work either. Difference is that the search is now based on escaped characters. The iView does not seem to be able to decode the string again.

I have investigated further now.
It is the KM Search iview that does not handle encoded characteres properly.
When using the standard search function in the portal, same propblem exist.
Steps for recreation:
1) Log in to the enterprice portal using a user that has got the standard search input field and search button. Could be an administrator.
2) In the search input field, write the danish word: skål.
3) Push search button
Search result page is now opened in a new window.
Term is now presented as sk[box]l.
Having a look in the url to the new window, shows that the special character is encoded. Therefore problem is that it is not decoded in the iView.
I also found that "Note 917961 - NW04 CM & Collaboration: SP 14 Patch 5" describes that the problem is solved in patch 2 in SP14. As far as I understand the note.

Similar Messages

SQL Developer not accepting certain characters from the keyboard

Hello,
I have been using SQL Developer for 5 or 6 months now, with minor issues and great satisfaction.
A few days ago, just out of the blue, in the middle of the day, SQL developer started not accepting the following characters:
Ctrlv, Ctrl + c, F5, F9 (I Think all function keys), BackSpace, Delete, Enter and arrow keys.+*
T*his is only happening in the text editor part*. I am able to use this keys in the results, whether they were a script output or an execute query output.
SQL developer also functions properly (if i paste using the mouse, paste works.. and all the other keys)
I checked the pc for viruses, using AVG, no viruses were found (my avg is updated daily and runs daily virus checks on a schedule, and this issue has been here for the past 1 or 2 weeks, so it was a virus, i think it should have been discoverd, besides, the keys are still working in sql developer, only not in the text editor part)
Needless to say, but if i run notepad and type, keys work properly.
I also reinstalled it in another folder with no luck
Tried so many restarts .. no luck
Tried it in safe mode .. no luck
I am using SQL developer Version 1.5.4, Build MAIN-5940.. on Windows Xp
I am suspecting there's some option in it that I disabled without paying attention..
HELP!!!
Regards,
Charles

All that time trying possible solutions is understandable, but then typing them in your post... when searching the forum would have given you the solution under 1 minute:
Preferences - Accelerators - Load Preset - Default
Hope that helps,
K.

Deluge not accepting wide characters

First post ever!
I'll get straight to my problem. I'm trying to download the discography of Jørn Lande <-- norwegian character right there
and Deluge doesn't accept it. Says something about invalid or incorrect multibyte or wide character. The download is thus paused, and I'm stuck. I've wasted the day downloading the torrent with transmission (no error message in GUI, didn't check terminal) but it didn't save the information downloaded, and thus wasted my afternoon. What do I do? Is there some patch or package I can download to make Deluge accept wide characters?
Cheers

I've uncommented the following:
nb_NO.UTF-8 UTF-8
nb_NO ISO-8859-1
"locale" in terminal gives:
LANG=nb_NO.utf8
LC_CTYPE="nb_NO.utf8"
LC_NUMERIC="nb_NO.utf8"
LC_TIME="nb_NO.utf8"
LC_COLLATE="nb_NO.utf8"
LC_MONETARY="nb_NO.utf8"
LC_MESSAGES="nb_NO.utf8"
LC_PAPER="nb_NO.utf8"
LC_NAME="nb_NO.utf8"
LC_ADDRESS="nb_NO.utf8"
LC_TELEPHONE="nb_NO.utf8"
LC_MEASUREMENT="nb_NO.utf8"
LC_IDENTIFICATION="nb_NO.utf8"
LC_ALL=
Is something wrong?

FindNode returning Null And XML Not Accepting Special Characters

Hi All,
i am trying the get the attribute value in the element "ns4:InfoCFDi" using FindNode method, but the method is returning NULL. I used the same code for other sample as well and was successfull. but for this specific XML file(which is below) I am getting a Null.
i can get till S:Body, but when i try to use FindNode for ":Body/s4:ResponseGeneraCFDi" I get Null value.
And I used "S:Body/*[local-name()=" | "ns4:ResponseGeneraCFDi" | "]";
as mentioned in other post but still no success.
==>I Have one more question relating to special characters. I need to use characters such as - ó in my XML to read as well as write. When I try to read i am getting XML parse error and when writing, i cannot open the file properly.
Your help is much appreciated.
My code is here:
Local XmlDoc &inXMLDoc, &reqxmldoc;
Local XmlNode &RecordNode;
&inXMLDoc = CreateXmlDoc();
&ret = &inXMLDoc.ParseXmlFromURL("D:\Agnel\Mexico Debit Memo\REALRESPONSE.xml");
If &ret Then
&RecordNode = &inXMLDoc.DocumentElement.FindNode("" );
If &RecordNode.IsNull Then
Warning MsgGet(0, 0, "Agnel FindNode not found.");
rem MessageBox(0, "", 0, 0, "FindNode not found");
Else
&qrValue = &RecordNode.GetAttributeValue("asignaFolio ");
Warning MsgGet(0, 0, "asignaFolio." | &qrValue);
End-If;
Else
Warning MsgGet(0, 0, "Error. ParseXmlString");
End-If;
XML File:
- <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
- <S:Body>
- <ns4:ResponseGeneraCFDi xmlns="http://www.xxl.com/ns/xsd/bf/rxx/52" xmlns:ns2="http://www.sat.gob.mx/cfd/3" xmlns:ns3="http://www.xx/ns/bf/conector/1&quo t; xmlns:ns4="http://www.xx/ns/xsd/bfxx/xx/32&qu ot; xmlns:ns5="http://www.xxcom/ns/xsd/bf/xxxxx&q uot; xmlns:ns6="http://wwwxx.com/ns/referenceID/v1">
- <ns3:Result version="1">
<ns3:Message message="Proceso realizado con exito." code="0" />
</ns3:Result>
- <ns4:InfoCFDi noCertificadoSAT="20001000000100003992" refId="STORFAC20121022085611" fechaTimbrado="2012-10-22T08:56:45" qr=" "
uuid="a37a7d92-a17e-49f4-8e4d-51c983587acb" version="3.2" tipo="XML" archivo="xxx" sello="B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=" fecha="2012-10-22T08:56:44" folio="281" serie="IICC">
<InfoEspecial valor="Este documento es una representacin impresa de un CFDI." atributo="leyendaImpresion" />
<InfoEspecial valor="||1.0|a37a7d92-a17e-49f4-8e4d-51c983587acb|2012-10-22T08:56:45|B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=|20001000000100003992||" atributo="cadenaOriginal" />
<InfoEspecial valor="Doscientos dieciocho mil cuatrocientos setenta y cinco pesos 00/100 M.N." atributo="totalConLetra" />
</ns4:InfoCFDi>
</ns4:ResponseGeneraCFDi>
</S:Body>
</S:Envelope>
TIA

First of all you have to supply a value you want to search for and this has to be the complete path to the value. You're saying you already tried that, but can you paste the code which you used for that? I don't see the path mentioned in the code you posted.
*FindNode*
Syntax
FindNode(Path)
Description
Use the FindNode method to return a reference to an XmlNode.
The path is specified as the list of tag names, to the node that you want to find, each separated by a slash (/).
Parameters
Path
Specify the tag names up to and including the name of the node that you want returned, starting with a slash and each separated by a slash (/). This is known as the XPath query language.>
Another option would be this snippet of code:
&InfoCFDiArray = GetElementsByTagName("ns4:InfoCFDi");
&InfoCFDiNode = &InfoCFDiArray [1];
&attValue = &InfoCFDiNode.GetAttributeValue("noCertificadoSAT")
Warning(&attValue);
It creates an array of XML Nodes which match the name "ns4:InfoCFDi". Since there's only one in the XML it's safe to assume it will be the one and only node in the array. I've assigned that node to the variable &InfoCFDiNode and use that to retrieve the attribute "noCertificadoSAT" value. The warning message should display the value supplied there.
Concering the special characters; you will have to change the encoding of the XML. Peoplecode sets this to UTF-8 by default, but doesn't include this in the header. There's a little hack for that somewhere on the web, I'll see if I can find it.

Photoshop elements 13 serial number field not accepting any characters...WHY...WHY...WHY not?

second installation of software first worked no problem but now no go. running windows 7 on both, any thoughts?

HI Collin
If you have a 24 digit code that contains letters and not all numeric numbers. It sounds like that you have the redeem code. Click this link to redeem the code. http://creative.adobe.com/redeem
Then you will be provided the serial # to install the software with.
Let me know if you run into any issues
Thanks
Scott

Login screen will not accept special characters in password

So, I have a domain account that has a password that contains the character created by pressing ctrl and Backspace key. I have found that if you attempt to type that character at the windows login screen, it will not recognize that. If you remote desktop
to the pc from any version of windows, it will allow you to type in that character and logs in fine. If you went to change a local users password by using the Computer management mmc, it will allow you to enter that character.
How is it possible that this was overlooked, and is there a likelihood of it being fixed?
I'd like to point out that this occurs in windows 8.1 also. I have a large base of bilingual users that have Spanish and other characters in their passwords that have worked up until now.

Hi,
If i understand you correctly, you could not type the special character at the windows login screen in windows 8.1, but remote desktop could. Am i right?
According to my test, the same result.
So i think you could remote to the pc and change the password:
http://support.microsoft.com/kb/149427/en-au
Regards.
Vivian Wang

Contact form not accepting certain characters in the email box

Hi, i am currently using a flash template from flashmo.com and i have installed it etc... The problem i have is that when you go to send a message in the contact form you cannot enter certain characters in the email box, especially the '@' symbol, hw do i go about fixing this?
Thanks a lot

for each textfield you see in the ide, click it (to select it) and check the properties panel/embed fonts to make sure all characters needed in your app are checked.

What can I do about a 2008 iMac that does not accept any input, thus blocking entry of password at startup?

My 2008 iMac (20 inch) often freezes. Now it will not accept any input on startup. I type in my password, but it will not accept any characters I enter. The blinking line just continues to blink. It will not acknowledge my keyboard, mouse or trackpad. I have done a forced reboot and a force reboot combined with subsequently disconnecting the power cord and then restarting. No response from either step. What can I do?
Thanks.

Glad it is working for you.
Have a look at these two articles they may help if it occurs again.
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379

Wrong results in URL iview and overview of URL parameters

I have created an URL iView that is supposed to query an index and return results. I am using the URL:
/irj/servlet/prt/portal/prtroot/com.sap.km.cm.service
and added following URL parameters:
StartPage=SearchPage
ConfigFileName=Navigation.xml
layoutSetMode=exclusive
ResourceListType=com.sapportals.wcm.SearchResultList
SearchType=quick
QueryString=marketing
SelectedSearchIndices=KnowledgeBase
The problem that I have is that the iView returns the second page of results (11-20) instead of the first one (1-10). When I hit the Search button again the result is the first page of results.
Does anyone have experience with this problem?
I've searched SDN on an overview of URL parameters (for example a parameter to specify the number of results to be shown on a page) to solve this problem, but couldn't find anything. Does anyone have an overview on URL parameters?
Thanks in advance!
Kind regards, Hilco

Hi,
Please check if the iView properties are as per properties mentioned in this <a href="http://help.sap.com/saphelp_nw04/helpdata/en/4c/eee2bedf3b4082b14a933e5ee63472/frameset.htm">link</a>.
Regards,
Sujana

File URLs - do not accept spaces in folder/direcotry name?

Version of US used is: 1.0.3
I tried to create a file data source with the following file URL from the Administration Application under the Sources/File tab:
file://localhost/c:/myDir/New Folder/
But I got the following error:
Oracle Ultra Search Error
Invalid file protocol URL:Folder/
URL does not begin with file://
Note: It is not a problem if the folder name does not have a space. E.g. when I renamed "New Folder" to "New_Folder", it was fine.
My questions: Is that correct that US does not accept file URLs with spaces in the folder/directory names? If so, is it the same with the newer release US 9.0.2?
Thanks.

Currently space is used as a delimiter in file seed URL.
Therefore, user can not crawl files located in directory containing space. This is the case for 9.2, 1.0.3, 9.0.2. You raise a good point, I will evaluate the possibility to remove this restriction in our next release (iAS 9.0.4). If we decide to support this, I will update this question.
Thanks ! ^_^
Cindy
This is the text on Create File Source Step 2:
===================================================
Enter a list of URLs separated by valid delimiters. A valid delimiter can be any one of the following characters: a space, tab, newline or comma.

TREX Search with URL Parameters

Hi all,
is there still a (supported) way to query TREX via a URL with parameters in 2004s?
Thanks,
Reinhard

Reinhard,
This should help you out a little bit
Standard Portal call for html event: https://<servername>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/
PCD Object Location to your search iview: pcd!3aportal_content!2fcom.sap.sen.search!2fcom.sap.sen.search.iViews!2fcom.sap.sen.search.value_engineering_search?
Type of Search: SearchType=quick
Predefined Properties (Metadata): &SelectedPredefinedProps=<namespace>:<metadata unique id>(value=<value searching for>/operator=EQ)
Query String: &QueryString=*
Put it all together!
https://<servername>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/pcd!3aportal_content!2fcom.sap.sen.search!2fcom.sap.sen.search.iViews!2fcom.sap.sen.search.value_engineering_search?SearchType=quick&SelectedPredefinedProps=<namespace>:<metadata unique id>(value=<value searching for>/operator=EQ)&QueryString=*
Thanks
Trevor

Passing URL parameters to WD app in URL IView

Hi experts,
I'm using EP 7.2 and as I found out this version doesn't support Web Dynpro Java iview template so I'm using URL iview template for my Web Dynpro Java application. My requirement is to somehow pass some URL parameter (which is id for something in my app) to the WD app in the URL iview. So in this scenario setting the URL parameters and their values during design time for the iview is not suitable. I tried DynamicParameter=id%3D154 for example but it doesn't work. Do someone has any ideas to solve this problem? Any help will be appreciated.
Regards,
Martin
Edited by: musaka on Oct 27, 2009 1:12 PM

Hi Musaka,
If i am not mistaken, your requirement is to display a URL iView to user with some parameters (contained within the Address Bar of the Browser) to be passed to the iView. Initially as no parameter value can be defined on previewing the iView or opening the iView, no value is passed to iView. But in case, when you directly enter the Parameter Values against Parameter Names in Address Bar and then say go, the page should reload and pick the parameter values from URL in Address Bar instead.
Steps to follow:
1. Put CustomerId=0&RequestId=0 in the Application Parameter property of the URL iView.
2. Put the following lines of code in the wdDoInit() in the implementation tab of the View Controller to retrieve and use the passed parameter value in the View of the application and then say Organize Imports from the context menu.
int customerId = WDProtocolAdapter().getProtocolAdapter().getRequestObject().getParameter("CustomerId");
int requestId = WDProtocolAdapter().getProtocolAdapter().getRequestObject().getParameter("RequestId");
Please revert in case of any issue.
Regards,
Tushar Sinha,
Infosys Technologies Limited,
Hyderabad,
India
Edited by: tushar sinha on Oct 29, 2009 10:51 PM

"URLs with .file not accepted"

Just upgraded to Lion OS 10.7. When I try to search for an upgrade, I get the message URLs with .file not accepted. Anyone know what the problem is?

How to config URL parameters dynamiclly in URL iView?

Hi all,
I have 2 iViews, iView1 is a WD application iView, iView2 is a URL iView with some URL parameters.
Firstly I navigate from IView1 to iView2 with some parameters, then I hope to pass these parameters to the URL parameters configued in iView2.
For example,
<b>iView2 configuration:</b>
URL: http://server1/app
URL parameter name: param
<b>Navigate from IView1 to iView2:</b>
WDPortalNavigation.navigateAbsolute("ROLES:"+iview, WDPortalNavigationMode.SHOW_INPLACE,(String) null, (String) null, WDPortalNavigationHistoryMode.ALLOW_DUPLICATIONS,(String)null,(String) null, "value=123");
Then how can I pass the value 123 from iView1 to the parameter 'param' in iView2?
Best regards,
Bean

Hi Bean ,
The approach you are following is correct ,refer to these links , there you can find the concept of WDportalnavigation properly,Also check for the relative navigation.
http://help.sap.com/saphelp_nw04/helpdata/en/c3/235a428a1e9041e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/235a428a1e9041e10000000a1550b0/frameset.htm
Thanx
Pankaj

IView not found error when searching

Hi,
We see the below error when trying to do any search on the EP6 SP14 portal. The search function was working, but now we see this error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found:
pcd:portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.basicsearch.
Exception id: 01:29_09/03/06_0003_1786050
See the details for the exception ID in the log file
The search functionality was working last week. The
com.sap.km.basicsearch iview is there.
Any help is greatly appreciated.
Regards,
Rick

Rick,
Goto the Physical location of the iView and see whether the iView exists there. If yes, then right-click on it and select 'Preview' and then try to enter anything and say Search. Do you get the same error message here also.
Or create your own iView from the par(basicSearch iview) and try to search from your own iView also. Let me know the results.
Regards
Vaib

URL Parameters in KM Search iView not accepting spacial characters

Similar Messages

Maybe you are looking for