Url paths on idisk

I thought I had this down pat, but I don't know if i'm messed something up or if there are technical difficulties on Apples side with iDisk. I have used iWeb to create a website and am using .mac publishing. I was testing the application iPhoto Export for use with Simple Viewer to publish pictures to be used within an iframe. Creating my separate galleries I used Panic Transmit to upload the first folder to .macusername/web/sites and though I should be able to access the folder from its own url I can't seem to do it. Folder name is "birdsofprey" so I used "web.mac.com/username/web/sites/birdsofprey/index.html" I'm only getting the Apple "this page does not exist" showing up. Am I missing something?

Ok I think I have it figured out. The original path I had was correct (web.mac.com/username/birdsofprey/index.html), and I think thats what you were trying to get me to do, but it seems to take a while for the address to become active.
Also, is there a limit on subfolders in a url? I tried to consolidate the other picture folders I uploaded to "web.mac.com/username/subfolder/birdsofprey/index.html" but even after waiting I couldn't access the files when adding the subfolder to the url. Did I just not wait long enough? (and yes I did mean webdav, sorry. I was multi-tasking with another server over ftp and mixed my protocols)

Similar Messages

URL paths and regular expressions in ASDM

Some background info - I've recently switched to an ASA 5510 on 8.4(3) coming from a Checkpoint NGX platform (let's say fairly quickly and without much warning ). I have a couple questions and they're kind of similar so I'll post them up. I've read docs about regex and creating them both via command line and ASDM, but the examples always seem to include info I don't need or honestly something I don't understand yet (mainly related to defining class\inspect maps). If someone could provide a simple example of how to do these in ASDM that would help a lot in understanding how regular expressions are properly configured. So here we go.
I know this is basic but I need to make sure I understand this properly - I have a single web server (so this won't be a global policy) where I need to allow access to a specific URL path\file and that's it. So we'll call it \test\testfile.doc. Any other access to any other path should be dropped. What's the best way to do this in ASDM (6.4)? I think if I saw a basic example for this I could figure out next few questions but I'll post them as well just in case.
I have another single public web server (again this won't be a global policy) where I'd like to specify blocking file types, like .php, .exe., etc... again a basic example would be great.
Lastly, and this is kind of related, but we have a single office/domain and sometimes we get spam from forged addresses appearing to be from our domain. On Checkpoint I used to use its built-in SMTP security server and could define if it received mail from *@mydomain.com to drop it because we would never receive mail externally from our own domain name. I saw something similar with ESMTP in ASDM and it looks kind of like how you set up the URL access mentioned above. Can I configure this in ASDM as well, and if so how?
TIA for your help,
Jordan

/bump

How to move up within a URL path?

Recently started using URLs in my programs. Works great. However, all the
time I have been wondering how to move up in that URL path. For example,
if my url1=("http://www.something.com/") I normally end up at the index.html.
But how could one set up a relative url reaching a file or directory at the same
level as that index.html? I suppose one should go up onel level and then
specify the name of the required file.
I tried to use things like url2= new URL(url1,"../myfile") but that doesn't seem
to work.
Anybody has an idea? Thanks in advance.
Dirk

martin@work wrote:
Hi,
you can't, if your web server provides the minimum of security. In the web server configuration you normally map a base url to a physical directory on the server and the web server does its very best to assure that you can only access files in that physical directory and below, and that all other files on the server in any upper or parallel directories are not accessible.
If you want to access files in a parallel directory then you have to create a further mapping in the web server which maps another base URL to that directory.
Martin To reinforce what Martin says: if you cannot do this with your web browser, don't expect to do it with Java.
On the other hand, if you can do it in your web browser, we misunderstood your question and please
reformulate it using actual URL's (or at least the portion following the host name).
Edited by: baftos on Apr 25, 2008 9:28 AM

SP Designer Workflow: How to Get Full URL Path to List Item and inserted same list ITem URL in another list

Hi,
I have requirement in Sp Designer 2010,Get List item URL and insert in another list as one column value.When open another list and click on same item column entry url will show the parent item information.
Here i have create work flow and insert item URL in another list but cant find appropriate item url information.I can easily make item url link through String builder in mail body with using current id and predefine link,but
when try to insert the same type of item link in another list where i cant find string builder for create custom url link,only get valur of Path,URL,Absolute URL and Relative server URL,all these links or not provide me exact
item link dispaly information.
So I opened SharePoint Designer and start creating the workflow associated to the list.
As there is some Field from source related to current item URL I start using it
Encoded Absolute URL – this one should be the one to use
Server Relative URL
URL Path
Unfortunately, none of these options were providing the correct link. Indeed, these options are providing an incorrect path:
Encoded Absolute URL
http://wfe1/Lists/bpf/1_.000
Server Relative URL
/Lists/bpf/1_.000
URL Path
/Lists/bpf/1_.000
As you can see, the item URL is composed by an ID while it should be http://wfe1/Lists/bpf/dispform.aspx?id=1
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Share Point Application Developer,TCS

Unfortunately, [%Current Item:URL%] doesn't seem to be available from a "Site Workflow" associated to a List. I'm finding less advantages to doing a "Site Workflow" when I don't necessarily need to. One problem is the workflow is initiating
twice. I'm thinking I should have just created the workflow as a a "List Workflow."
I am going to try "Association Columns" -- that may work. Anyone have other suggestions?

How to hide the URL path on click of an link to URL element,from user

Hi All,
I have an link to URL element, on click of the link it opens the specified url in a new window. But in new window the user is able to see the entire URL path. I want to hide this path from the user. Can any one please suggest me how to do it.
Regards,
lakshmi.

hi,
just check this help
http://help.sap.com/saphelp_nwce10/helpdata/en/f7/f289c67c759a41b570890c62a03519/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7d/fdc99ab37a8d42892e0d39bbd23be8/frameset.htm
Link to URL Question

When opening a pdf in Firefox from a website, the navigation bar disappears. I would like to copy the URL path to send to staff.

Using Acrobat Pro XI, Windows 7-64, Firefox 25. If I open a PDF from a website link in IE, the PDF opens and I can see the URL path where I can copy it and send to others. Opening the same link in Firefox does not show the URL path. I get the File, Edit menu but no URL.

Is the PDF opening in a separate (popup) window? Sites can alter which bars appear on a popup window, but the address bar should always be visible (that's the default setting). Could you check and make sure that hasn't changed?
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''window_o''' and pause while the list is filtered
(3) If the '''dom.disable_window_open_feature.<u>location</u>''' preference is bolded and "user set" to false, double-click it to switch it back to true so sites are disabled from hiding the location (address) bar on popup windows.

XI 3.1 sp2 url path for report folders

In XI R2:
To navigate to the report folders we have used :
http://<server name:Portnumber > /businessobjects/enterprise115/desktoplaunch/InfoView/main/main.do?objId=0
What is the equivalent of url path in XI 3.1 SP2..
Edited by: senthil gobal on Apr 29, 2010 10:56 PM

The path doesn't change in XI 3.x the way it did in XIR$2 also the SDK has changed. You may want to post in the SDK forums to get help updating your code. If you were hitting main.do
I assume your code was creating a logon session for you in some way? There is a link to the SDK forums in the sticky post at the top of this forum.
Regards,
Tim

Open txt file in CV02n for URL path

Hi
I stored atachment Text file in SAP content server for SRM SC document.
and i have below HTTP url.
http://1xxxxxxxx:1090/ContentServer/ContentServer.dll?get&pVersion=0046&contRep=BBPFILESYSTEM&docId=E03E3F4E929E9BF1B4100026B98BDDE2&compId=linknew.TXT
I want to open the file in notepad from CV02N without opening browser. How to do this.
I used data carrier INTERNET and TYPE as UR, In this case its opening browser and opening text file.
But i dont want to open browser, instead i want to open only text file.
I already did customizing in ERP system for TXT file and if i checkin text file in CV02N i am able to open it in notepad.
simmilarly i want to open URL path file also.
Pls sugges me how to do this
Regards
Chandra
Edited by: princeck on Feb 24, 2011 10:09 AM

Make sure the filename has an absolute path. If the path is relative it will point to a different location depending on where you run the program from.
When you run it from within Xcode itself the binary is buried way inside the project hierarchy (you can see where it is by selecting the program in the Products folder and doing a Show in Finder).
The safest bet is to always specify a specific directory for any writes you do.
regards
As an example for this program in Xcode (assumoing you will be able to see the images)
The binary is located here

Mapping root of URL path to web applications

          Does the name of the web application have to equal the first element in the URL
          path? The WebLogic 5.1
          documentation suggests that you can create such a mapping with a property:
          weblogic.httpd.webApp.<context>=<WebAppLocation>
          where <context> is the servlet context path (I presume that is the root of the
          URL path) and
          <WebAppLocation> is the application root directory (or WAR-file location). Is
          there any equivalent to
          this mapping in WebLogic 6.1, or must the URL path begin with the web application
          name?


          "Daniel Steinberg" <[email protected]> wrote:
          >
          >Does the name of the web application have to equal the first element
          >in the URL
          >path? The WebLogic 5.1
          >documentation suggests that you can create such a mapping with a property:
          >weblogic.httpd.webApp.<context>=<WebAppLocation>
          >where <context> is the servlet context path (I presume that is the root
          >of the
          >URL path) and
          ><WebAppLocation> is the application root directory (or WAR-file location).
          > Is
          >there any equivalent to
          >this mapping in WebLogic 6.1, or must the URL path begin with the web
          >application
          >name?
          I have looked further into the documentation, and the answer seems
          to be NO. However, I can solve my particular problem (supporting
          old URLs) by defining a default web application.

... IllegalStateException: Cannot map handler [] to URL path

Hello,
I have a Java web application built using Spring + Freemarker + Hibernate +
XFire
Everything worked fine until today when....after creating a new page
Controller, I built the project -> BUILD SUCCESFULL, but when I start Tomcat
i get ... IllegalStateException: Cannot map handler [<handlerName>] to URL
path.
It seems that my controller is instantiated twice, but I don't know why. It
should instantiate ONCE as I create a bean for it in .xml file exactly as
for the other(30-40) controllers.
any ideea?
Thanks.

I think you are facing 2 issues here
1) how do you index a file present in a windows server
2) how do you handle the dynamic directory structure part.
For #1 - if the user who is creating the index , have enough permission to access the location/machine,then you can use ftp to access those files too
For #2 - As far as FILE_DATASTORE Is concerned, it is not possible (as you rightly said).
But, there is another way I can think of with some flip sides to it.
Use some thrid party application to copy the files from these location to a standard location. I haven't tried with links (to the exact file from a standard fixed location) will work or not for file_datastore, you can give it a try.

JavaContentSet - use an environment var as part of the url-path

Hi,
I startet to use JDeveloper beside Eclipse.
As such i got some ressources in my Eclipse workspace i want to use in my JDeveloper Projekt.
Its easy to tell JDeveloper to link some Resources from the Eclipse Workspace into my JDeveloper Workspace. But i dont like the url-path Syntax. In my Case its ../../eclipseWorkspace/eclipseProjekt.
It works, but its far away from perfect, because other developers would prefer different workspace layouts. As such it would be fine to be able to extend a environment variable to get the url-path. Example: "%ECLIPSE_WORKSPACE%/project/src/main/java" instead of "../../eclipseWorkspace/project/src/main/java".
Is there a way to reach this goal?
thx
Bernhard

Uf, sorry
the alias has to be the first element of the RID.
So if the RID is:
/documents/user01/tester.txt
and user01 is logged in, call:
.../irj/go/km/docs/~alias~/documents/<user.id>/tester.txt
or:
.../irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/~alias~/documents/<user.id>/tester.txt
(i've tested it now for being sure).
Romano

CSS 11500 url path rewrite and NAT

Hi,
We are evaluating a CSS 11500 and try to configure url path rewrite and NAT, but we have some problems.
What we would like to do is the following:
http://www.example.com/path1 -> http://host1:80
http://www.example.com/path2 -> http://host1:8080
http://www.example.com/path3 -> http://host2:80
The address www.example.com is resolving to a valid internet address, whereas host1 and host2 resolves to private IP addresses.
The client should always see the external url (e.g. http://www.example.com/path1/...) and the CSS should do the necessary translation.
Any help would be very much appreciated!
Regards,
Harald

Hello Experts, I'm new with this cisco stuff too(just got it 3 weeks ago), but here is some of my experience with cisco css 11501.
First : Service ServerName, there is a port setting here, but from my experience, I think it is related with KeepAlive option, so, port is alternate way to know if the server alive or not.
Second : When you send request to cisco css, the port option in content port will be the cisco css port to accept request, so, if you send a request to http://vip:8080/, all service must be in the same port too to balance the request, in this case, port 8080, if one service port 80, i'm sure the css will not hit the server.
Third : To solve your problem...
http://www.example.com/path1 -> http://host1:80 (ipA)
http://www.example.com/path2 -> http://host1:80 (ipB)
http://www.example.com/path3 -> http://host2:80
if you are lazy to buy new nic, just set subinterface/ip alias on the host1, and make the webserver only bind to specific address, not to all interface...
O yea, about your path1/path2/path3 -> /, hmm, i'm still asking in this forum about path changing cause until now, i haven't know how to do this, i know about apache rewrite module, and success do this, if only i know about this in cisco css too :-(
I'm sorry if I make mistake, I'm just telling my experience...

The specified file or folder name is too long,the url path for all files and folders

The specified file or folder name is too long,the url path for all files and folders must be 260 character or less
can we increase this limit?
MCTS,ITIL

Hi,
As I understand, you want to increase the length of URL path in SharePoint 2010.
Per my knowledge, this limit cannot be increased. SharePoint limits URL length because all relative URL links are stored in the clear forms on the SharePoint content DB and often this links are used as primary keys to link one table with another. Fields
which are used to store these links (for instance tp_DirName from the AllUserData table) allow storing only 256 characters.
There are several ways that you can resolve or mitigate URL length problems in the SharePoint Server 2010 environment. The following list provides suggestions:
1. Upgrade all the end-user browsers to Internet Explorer 8, which has a longer URL length limit.
2. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs.
3. If possible or allowed, use ASCII names for sites, folders, and documents. This will avoid situations where the URL will be lengthened by being encoded.
4. To reduce the risk that the SharePoint Server 2010 end-users will encounter problems because of URL length limitations, we recommend that you apply the following effective limits in the deployment:
256 Unicode (UTF-16) Code units - the effective file path length limitation, including a domain/server name
128 Unicode (UTF-16) Code units - the path component length limitation
More reference:
http://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
http://sharepointknowledgebase.blogspot.in/2013/04/url-path-length-restrictions-in.html#.VKJN53BJA
Best regards,
Sara Fan

Air Application URL Path Issue

I am trying to invoke a content of the file which is in shared folder from Air application.
Version : Flash builder 4.5,Flex3.6 sdk and Air 2.7.
for this am using the below code..
var request:URLRequest = new URLRequest();
//request.url = ('file:///c:/params.txt'); - This is working fine
request.url = ('file:///172.20.188.25/Share/chk/Property/params.txt'); // its not working
trace("Unable to load URL: " + request);
var variables:URLLoader = new URLLoader();
variables.dataFormat = URLLoaderDataFormat.VARIABLES;
variables.addEventListener(Event.COMPLETE, completeHandler);
try
variables.load(request);
The same part of code ,I tried in Flex application is working .but in Air application its not working.
Its urgent requirement,If any one know the way to resolve this path issues.
Kindly let us know.
Thanks in Advance !!

I tried in the following URL but no use ..
its throwing ioError and textError and stream error.
1.file:///172.20.188.25/Share/chk/Property/params.txt
2.http://172.20.188.25/Share/chk/Property/params.txt
3. //172.20.188.25/Share/chk/Property/params.txt
Is there any other solution for this issue ?

URL paths in Code/Design view

I just inherited a site that has a lot of images that are all hard coded (absolute URLs), and unfortunately, there are spaces in the path/ file names, such as /Main Folder/images/Picture File.jpg. When you plug the URLs into a browser or into DW code view, the spaces are filled in with %20 to represent spaces such as /Main%20Folder/images/Picture%20File.jpg
My goal is to have the images appear in the Design View, instead of the broken url gray image. It seems that only image url's without any spaces or without any %20 appear in Design View. Does anyone know how to make an image with %20 in the URL appear in Design View? Thanks!
(yes, I know that renaming the paths is the best solution, but this site is too big at this point, and I don't have any way to update thousands of files at a time)

Believe me Thomas, I know exactly what you are going through. I used to work for a company that used an archaic ecommerce platform called Marketlive. It was a beast, but caused more problems than what it was worth. But the companies that have grown with them have become so big they are afraid of change themselves. Unfortunately, you just have to make with what you have. Personally I'd still try to push about the paths because a find and replace could still be done ont he database side, although a bit more complicated than DW's because you would have to write a query to replace the values, but still possible. Honestly, I would just do without the preview and just code as if DW is your text editor and then upload and test. I wish there was a better answer, but even when I was in the tough situation that's what I worked with. If they don't like how time consuming it can be that way, then you need to show management how you could save time and money.

Url paths on idisk

Similar Messages

Maybe you are looking for