URL Redirection Help Required

Hi,
I have a SharePoint 2013 site, which has been built with mostly Out of the Box functionality.
There is an Edit link on the Page which is a part of a web part, but it is being redirected to the wrong URL. I want to know how to modify the URL for that Link within the Web Part.
Please kindly
Thanks
Vignesh

Hi,
From your description, my understanding is that you want to change the URL for a link in web part.
I am not quite sure what web part do you want to change, could provide a screenshot or detailed information for me?
Besides, if you want to change the URL of a link, you could use jQuery code as below to accomplish your requirement(add the code into a Content Editor Web Part in the page):
<script type="text/javascript" src="http://code.jquery.com/jquery-1.11.2.min.js"></script>
<script type="text/javascript">
$(function () {
// replace the selector with your own selector and replace the “www.bing.com” with the URL that you want to redirect to.
$("selector").attr("href", "http://www.bing.com");
</script>
You also could refer to this article:
http://stackoverflow.com/questions/179713/how-to-change-the-href-for-a-hyperlink-using-jquery.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

URL redirect Help port number

Hi I just recently upgraded to windows 10 from windows 7. In this process I lost my redirect settings for my help desk which is installed on my local pc. Can someone point me in the right direction. Right now my help desk works with my custom url however it has to include the port number. I do not have IIS installed on windows 10. I believe previously in windows 7 I had IIS and was using Helicon rewrite to do this. I just forget the step to do this. Right now it works with myurl.com:9675 i want this to work with just myurl.com and no port number.
This topic first appeared in the Spiceworks Community

Hi I just recently upgraded to windows 10 from windows 7. In this process I lost my redirect settings for my help desk which is installed on my local pc. Can someone point me in the right direction. Right now my help desk works with my custom url however it has to include the port number. I do not have IIS installed on windows 10. I believe previously in windows 7 I had IIS and was using Helicon rewrite to do this. I just forget the step to do this. Right now it works with myurl.com:9675 i want this to work with just myurl.com and no port number.
This topic first appeared in the Spiceworks Community

Need help with URL Redirect in Sun Web Server 7 u5

All I am trying to do is redirect to a static URL and for the life of me I can not get it to behave the way I would expect. I am new to Sun Web Server so I am just trying to use the Admin Console to set this up.
Here is what I'm trying to do:
Redirect from - http://www.oldsite.com/store/store.html?store_id=2154
To - http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Here's what I tried in the console.
Added a new URL Redirect
Set the Source to be Condition and set it to: '^/store_id=2154$' (quotes included)
Then set the Target to: http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Then for the URL Type I checked Fixed URL
When I tested with: http://www.oldsite.com/store/store.html?store_id=2154 it did redirect as desired
BUT
When I tested with: "http://www.oldsite.com/store/store.html?store_id=5555" it too got redirected to the Target and I can't figure out how this second URL can satisfy the condition to get redirected.
Any help is most appreciated.

thanks for choosing sun web server 7
it is simpler if you just edit the configuration files manually
cd <ws7-install-root>/https-<hostname>/config/
edit obj.conf or <hostname>-obj.conf (if there is one for you depending on your configuration so that it look something like)
<Object name="default">
AuthTrans..
#add the folllowing line here
<If defined $query>
<If $urlhost =~ "/oldsite.com" and
$uri =~ "/store/store.html" and
$query =~ "store_id=2154" >
NameTrans fn="redirect" from="/" http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
</If>
</If>
..rest of the existing obj.conf. continues
NameTrans...
now, you can either do <ws7-install-root>/https-<hostname>/bin/reconfig -> to reload your configuration without any server downtime or <ws7-install-root>/https-<hostname>/bin/restart -> to restart the server
if it did work out for your, you will need to run the following so that admin server is aware of what you just did
<ws7-install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname.domainname>
hope this helps

I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

The C170 does not support URL redirection prior to OS release 8.5. What exactly do you need to accomplish?

ISE & Switch URL redirect not working

Dear team,
I'm setting up Guest portal for Wired user. Everything seems to be okay, the PC is get MAB authz success, ISE push URL redirect to switch. The only problem is when I open browser, it is not redirected.
Here is some output from my 3560C:
Cisco IOS Software, C3560C Software (C3560c405-UNIVERSALK9-M), Version 12.2(55)EX3
SW3560C-LAB#sh auth sess int f0/3
            Interface: FastEthernet0/3
          MAC Address: f0de.f180.13b8
           IP Address: 10.0.93.202
            User-Name: F0-DE-F1-80-13-B8
               Status: Authz Success
               Domain: DATA
      Security Policy: Should Secure
      Security Status: Unsecure
       Oper host mode: multi-domain
     Oper control dir: both
        Authorized By: Authentication Server
           Vlan Group: N/A
     URL Redirect ACL: redirect
         URL Redirect: https://BYODISE.byod.com:8443/guestportal/gateway?sessionId=0A005DF40000000D0010E23A&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0A005DF40000000D0010E23A
      Acct Session ID: 0x00000011
               Handle: 0xD700000D
Runnable methods list:
       Method   State
       mab      Authc Success
SW3560C-LAB#sh epm sess summary
EPM Session Information
Total sessions seen so far : 10
Total active sessions      : 1
Interface            IP Address   MAC Address       Audit Session Id:
FastEthernet0/3       10.0.93.202 f0de.f180.13b8    0A005DF40000000D0010E23A
Could you please help to explore the problem? Thank you very much.

With switch IOS version later than 15.0 the default interface ACL is not required. For url redirection the dACL is not required as this ACL is part of traffic restrict for "guest" users.
In my experiece some users can not get the redirect correctly because anti-spoof ACL on management Vlan or stateful firewall blocks the TCP syn ack.
It is rare in campus network access layer switches have user SVI configured so the redirect traffic has to be sent from the netman SVI, but trickly the TCP SYN ACK from the HTTP server will be sent back from the netman Vlan without source IP changed. (The switch is spoofing the source IP in my understanding with changing only the MAC address of the packet). In most of the cases there should be a basic ACL resides on the netman SVI on the first hop router, where the TCP SYN ACK may be dropped by the ACL.
tips:
1. "debug epm redirect" can make sure your traffic matches the redirect url and will get intercepted by the switch
2. It will be an ACL or firewall issue if you can see epm is redirecting your http request but can not see the SYN ACK from the requested server.
Which can win the race: increasing bandwidth with new technologies VS QoS?

The best way to URL Redirect

Hello,
I noticed that couple different linking with a Button.
Home>Application Builder>Application 111>Page 1>Edit Page Buttons
Optional URL Redirect
Another is
Home>Application Builder>Application 111>Page 1>Edit Branch
Which one is better?
How many ways is there to URL Redirect?
Which way is the best and why?
Thanks,
NY, NY

One option would be to redirect all your users to the same landing page, which then redirects the users to the actual required page depending on the value of a header variable set by OAM. The header variable could, for example, contain the userid and then the landing page works out which page to redirect to depending on this value. In this scenario, all the logic about which page to redirect to needs to be within the landing page, or some back-end that it connects to.
I suppose it would also be possible to store the required target url (or a value which identifies it) in an attribute the users' profiles, and pass that as a header variable to the landing page - but obviously then you have the admin of maintaining that attribute value.
If you only have two possible target pages (eg one for all internal users and one for all external users) then you could use redirect on authorisation success/failure within OAM to send users to the right page.
Hope this helps,
Colin

How to do auto URL redirect in sun web server ?

Hi, i need to do auto url redirect in my sun web server. Currently i'm setup some rules for the reverse proxy in obj.conf file and the syntax looks like:
<Object name="reverse-proxy-/test">
<If $internal and $uri =~ "index.html">
NameTrans fn="redirect" from="/" uri="/examples/abc.html"
</If>
Route fn="set-origin-server" server="http://localhost:8989"
</Object>
The situation is:
1) When users browse "*http://localhost/examples/abc.html*" it will redirect to abc.html
2) When users browse "*http://localhost/test*" it will redirect to the localhost admin GUI (http://localhost:8989/admingui/admingui/serverTaskGeneral)
My desire output should be whenever users browse the "*http://localhost/test*" , it will redirect to abc.html page.
the syntax might be wrong. So, anyone knows how to fix this? I'm keep trying but nothing worked. Please help me.

Moderator action: Moved from Servers General Discussion.
db

Is there a way to create a popup to a page in URL Redirect ?

I have a button (also with a report link column) that is doing a URL Redirect to another page in my app. This works fine.
However, some pages I branch to are small forms and a popup of that form would be more appropriate.
Is there any way to create a URL Redirect that redirects as a popup rather than a page navigation? Similarly, can you branch to a popup page with a report link column?
Thanks,
Reid
Edited by: reidster on Jul 30, 2009 7:10 PM

With your help, I was able to create a popup on a report link column using this:
I just added an "a href" around it.
Thanks again!
Edited by: reidster on Jul 30, 2009 10:18 PM
Edited by: reidster on Jul 30, 2009 10:18 PM

URL redirection config in PI SOAP receiver communication channel

Hi,
I am working on a similar scenario where I my consuming an external web service using https protocol from PI.
I have configured a soap receiver channel to call the target url of this web service as https://portal.xyz.org.uk/webservice_alt.
I am getting an error HTTP 302 suggesting that PI is not able to follow the re-direction to the target URL as the service resides not on that URL but on https://portal1.xyz.org.uk/webservice_alt or https://portal2.xyz.org.uk/webservice_alt.
This is their server fail over handling mechanism which is very common. But PI 7.0 is not able to handle this.
So if I change the target URL on the SOAP receiver channel to https://portal1.xyz.org.uk/web service or https://portal2.xyz.org.uk/webservice_alt , PI works fine without errors . But this is not the right approach because, every time the web service provider takes one of these systems down for upgrade/patching etc, they inform us and then I manually go and change the target URL to the available server on my production PI system config.
My problem is I want to resolve this redirection error in PI. I have tried raising a call with SAP itself and they pointed out to use Axis adapter which is still not working.
So I am here asking for help. any suggestions please from the experts?
Thanks
Jhansi.

Hi guys,
I am sorry if I have not been clear so far!!
What I am talking about is a URL redirection capability of PI. what i mean is , when you call any service in general using a browser/soap ui etc, it pings that url and follows the redirection.
For example when i try to test this external web service directly using soap ui tool, it also returns HTTP 302 error. But when I set the 'Follow redirect' property to 'true' , it follows the redirection and calls the service on 'portal1' or 'portal2' .
You assume PI is a test tool like SOAPUI. When the address or URL changed in WSDL and if you load the latest WSDL in soapUI it post the request to the latest URL. YOu import WSDL only in ESR not in IR. Dont forget it. Though WSDL has soap address location, it will not impact the wsdl changes directly in ID.
It makes no sense to complain regarding the behaviour of PI when the reason for the problem is outside (WS provider).
please note that the target url is fixed which is https://portal.xyz.org.uk/webservice_alt.
so we are not talking here about the service provider altering the service and sending us new wsdl's etc.
All users of this webservice have been non-sap users so far and consumers use java, .net etc platforms and are easily able to handle the redirection.because this redirection is a part of failover mechanism.
I hope i am able to picture my problem.
thanks
Jhansi.

ISE url-redirect CWA to Gig1

Hello,
say I want to have five ISE 1.3 nodes behind load balancer, I want only only G0 behind LB, and G1 interfaces will be dedicated for certain things. Specifically I want to use G1 interface for Redirected Web Portal access (could be CWA, device registration, NSP, etc). RADIUS auth will happen through LB on G0 of some specific PSN, and that PSN will url-redirect user to the CWA URL.
How do I tell ISE to use specifically Gig1's IP address or Gig2's IP address? When I check result authorization profile, there is no option there, it's just ip:port. Obviously, that's not the right place, because which PSN is used to processed the policy is unpredictable.
So then I go to guest portal, and specifically Self-Registered Guest Portal that I'm using. So here I see Gig0, Gig1, Gig2, and Gig3 listed. My guess is that if I only leave Gig1 selected then I will achieve my goal, is that correct?
But then, why does it let me choose multiple interfaces, what happens if I select all of them?
Am I missing another spot in ISE admin where I can control this?
Additional question. I know that in ISE 1.2 you could configure "ip host" in ISE's CLI, which would force URL-redirect response to be translated to FQDN:port. Is that still the right method in ISE 1.3?
Thanks!

Take a look at the following document:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/installation_guide/b_ise_InstallationGuide13.pdf
Towards the end of the document you will find a section called: "Cisco ISE Infrastructure" and there you will see the following:
• Cisco ISE management is restricted to Gigabit Ethernet 0.
• RADIUS listens on all network interface cards (NICs).
• All NICs can be configured with IP addresses.
So, you can take an interface, give it an IP address and then assign it to the web portal that you are working with.
I hope this helps!
Thank you for rating helpful posts!

Report field substibution on URL Redirect

I am using ApEx 2.0
I have a page with two report regions based on SQL queries, joined by a common column. The master region is read only and in detail region, I changed the attribute of one field to display as text.
So, for example, the Master region has two columns:
M_COL1, M_COL2
The detail region has 3 columns:
M_COL1, D_COL1, D_COL2
The regions as joined on M_COL1 and D_COL2 is the Text field.
Next, i added a button to this detail region. When clicked I want this button to launch a URL whose parameters are sourced from some of the existing report column/fields on this page.
I cannot seem to get the substitution to work in the URL Redirect field of the button definition.
I want something to the effect of :
http://someserver:port/some_path/something?param1=&M_COL1&param2=&D_COL2
I tried putting #M_COL1#, :M_COL1 etc. but it doesn't work.
Any ideas/pointers?
Thanks,
Manish

Hi,
5. Pop-up reports:
- Go to any report with link column to a form. It is a very common situation.
- Go to the link column Column Attributes/Column Link/Target and change it to URL.
- javascript: popupURL('f?p=&APP_ID.:205:&SESSION.::&DEBUG.::::YES','Help','scrollbars=yes,resizable=yes,width=625,height=350,left=25,top=150');
- Replace 205 (It is my page number) with the number of the page which you are working on.
- Apply/Apply/Run the page.
- One would see the printer friendly version of ones page in separate window without loosing original one.
This is a very simple, easy to use and understand example.
One can replace “205” with any report showing Address … for the client.
6. One Master and many Detail tables:
Suppose that there are relations One to Many between one master and two or more details tables.
One can use two regions on a page. One should be a form region for the master table and second one should be a report region with several links.
6.1. Create a view of those two or more details tables. That is one master and one details view.
6.2. Create a Master Details form. The details form should be one of details tables.
6.3. Go to Edit Region (Details Region) and change SQL Query (updatable query) to SQL Query.
The Details form became Details Report.
6.4. Change Report Region Source from details table query to the view query.
6.5. Duplicate columns which are links and reorder them. Replace their header names with “ ” for instance.
6.6. Into Column Attributes/Column Link/Link Text pick an icon.
6.7. Select for Attributes/Column Link/Target “URL”.
6.8. Into URL field type
javascript: popupURL('f?p=&APP_ID.:205:&SESSION.::&DEBUG.::::NO','Link','scrollbars=yes,resizable=yes,width=625,height=350,left=25,top=150');
and replace 205 with the appropriate page number.
Now the page has one form with Next and Previous buttons for the master table and one report for the Details view with two or more links. Pop-up window with an edit detail table form appears when one click on a link (icon).
Konstantin Gudjev
[email protected]

ISE CWA FLEXCONNECT - No url redirect

Hi,
I'm setting up a LAB environment for CWA with ISE(1.2.1), vWLC(8.0.100), ASA5505(9.1.X) and a 2602 AP in flexconnect mode.
Unfortunately I'm running into problems.
The AP, WLC and ISE is all running in vlan 1 which terminates in the 5505 as a inside interface.
Vlan 2 is a guest network terminating on a separate interface in the ASA.
The problem that I'm facing is that the url-redirect from the ISE dosent' work. If i check the client summery on the vWLC I can see that the client get applyes the redirect flexconnect ACL and that the URL is present. I've verified that it's not a DNS issue and I'm able to manually connect to ISE so there is no ACL blocking me. The client just dosen't get the redirect. I've tired with multiple devices (windows,ios,android) and it's all the same.
I've followed the following guides:
http://www.drchaos.com/flexconnect-local-switching-guestbyod/
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html#anc11
Currently I'm at work but I can provide some debug output later.
Have anyone seen this behavior before?

It is possible that you are hitting the following bug:
https://tools.cisco.com/bugsearch/bug/CSCue68065
One thing this bug does not mention is that there is another resolution outside of disabling local switching. The alternative is:
1. Create a standar ACL on the controller that is named exactly as the FlexConnect ACLs
2. The standard ACL does not have to have any ACE in it
I have ran into this issue before and the above workaround has worked for me. The issue was supposed be addressed in version 8.x of the WLC but I think it is still worth giving it a try.
Thank you for rating helpful posts!

Issues getting url-redirect working with Cisco ISE

Hi,
I am currently doing a Proof of Concept using Cisco's new ISE product. I am having issues getting the url-redirect raidus attribute working. I have read the troubleshooting document and everything in it points to it should be working. By debuging the radius information on the switch I can see that its passing the url-redirect to the switch which in my case is was https://DEVLABISE01.devlab.local:8443/guestportal/gateway?sessionId=0A00020A0000001604D3F5BE&action=cwa. Now to remove DNS issues etc from the equasion if I copy and paste this URL into the client browser it takes me to the correct place, and I can login and it changes VLAN's accordingly. Now as far as I know the client should automatticaly be redirected to this URL which is not working. Below I have included one of the debugs to show that the epm is in place.
DEVLABSW01#show epm session ip 10.0.1.104
    Admission feature: DOT1X
              ACS ACL: xACSACLx-IP-PRE-POSTURE-ACL-4de86e6c
     URL Redirect ACL: ACL-WEBAUTH-REDIRECT
         URL Redirect: https://DEVLABISE01.devlab.local:8443/guestportal/gateway?sessionId=0A00020A0000001604D3F5BE&action=cwa
I have also attached my switch config. Any help would be greatly appreciated.
Dan

So im also doing ISE for the first time and i knew it may have been a bit tough however i didnt forsee my following issue.
everything is working as expected other than every now and then (intermittent) the ISE Central Portal does not display on any device -android, windows, etc..... i checked and checked the configs, had probably about 10 TAC cases open..... this weekend i ripped out the main components, setup in the offfice and tried to replicate the issue....i could...what i noticed is that without Internet the ISE Portal didnt actually display....it sounds weird but thats what im seeing.....As soon as i plug into Internet Link into the equation, the portal page comes up.....im able to replicate it every time... Currently, i placed back into the customer network and im now looking down at the routing/firewall......
my issue is that i cant really explain why the Internet affects the Central Auth Page.... In any event. im working backwards, tomorrow im bringing in a second link and doing NAT on a cisco router to bypass the checkpoint firewall....ill know if its checkpoint or if im barking up the wrong tree....
if anyone can explain why, it would help out a great deal..
My setup BTW is
1. WLC 5760 - Not latest code but latest stable (recommended by the TAC Engineer)
2. ISE 1.2 - Doing simple Wireless only implementation
3. 3650 - Just acting like a switch - no ACLs etc - just a switch
4. Integrated into AD
Ill post back with any findings if i make any headway - BTW, i didnt like this at all as other solutions are so much simpler, BUT, i can now see how powerful this could potentially be for the right type of customer...
thanks again how i can get some feedback

Does using self-signed cert. on ISE server has anthing to do with url redirect being not working

Hi,
I am setting up wired ISE environment. Everything is going fine, except url redirect is not working.
I just wondering, if using self-signed certificate on ISE server has anothing to do with the problem ?.
Appreciate your input.
Thanks

Hi,
As long as you have not changed the hostname or the domain name (and dns is accurate). You should only receive the certificate warning but still get redirected without any issues.
Thanks,
Tarik Admani
*Please rate helpful posts*

Ise: Url redirection not working

everything should be ok on ise and switch
the switch is configured with its own ip on the vlan (22)
PS is on vlan (44)
and ise is configured for web authentication policy to occurr on the logon vlan (33)
the service is reachable by inputting the policy service ip address on port 8443, authentication is successful, acl downloaded and redirect url pushed properly to the switch but redirect never occurrs,
instead a blank page (host not reachable) is displayed
the clients on vlan 33 can resolve dns without problems
the firewall has been set to make the vlan 44 and 33 talk each other on port 80,443,8443
it looks like the switch's http/s-server is not making any difference maybe because it is on another vlan though it is routed
can someone help me?
i would really appreciate a flow chart on how web redirect works in ise and tge role of the http server
ps the switch does not support the ip route command

however not everithing is working as it should, sometimes the acl are not pushed properly and the redirect acl does not show any hit (often), sometimes the centralwebauth acl is not pushed properly and the show ip access list interface results in blank output
interface GigabitEthernet1/0/10
description Porte dot1x - voip ISE
switchport access vlan 300
switchport mode access
switchport voice vlan 818
ip access-group ACL-ALLOW in
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication event fail action next-method
authentication event server dead action authorize vlan 300
authentication event server alive action reinitialize
authentication host-mode multi-domain
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
mls qos trust cos
dot1x pae authenticator
dot1x timeout tx-period 10
auto qos trust
spanning-tree portfast
spanning-tree bpduguard enable
end
the show auth sessiond for the interface is
            Interface: GigabitEthernet1/0/10
          MAC Address: 20cf.3017.645b
           IP Address: 172.31.105.132
            User-Name: 20-CF-30-17-64-5B
               Status: Authz Success
               Domain: DATA
       Oper host mode: multi-domain
     Oper control dir: both
        Authorized By: Authentication Server
          Vlan Policy: 300
              ACS ACL: xACSACLx-IP-CentralWebAuth-5062f332
     URL Redirect ACL: redirect
         URL Redirect: https://ISEC3395.omitted.omitted:8443/guestportal/gateway?sessionId=AC1F552F0000000A001A6FD2&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: AC1F552F0000000A001A6FD2
      Acct Session ID: 0x0000000D
               Handle: 0x7C00000A

URL Redirection Help Required

Similar Messages

Maybe you are looking for