URL to be used in high availability for Directory Server
Hi All,
I have an environment configured for high availability. I have two OVD and OID servers each in this environment, configured in high availability. What should be the value in the Server URL field of the Directory Server IT Resource in the OIM for this environment? In the normal environment, I had it as "ldap://ovdhost01:6501" and it was working fine. But since there are two servers here, I am not sure what URL to use in place of this. The entry for the two ovd hosts in the OHS is "idstore.com" which is configured on 6501 port. But I tried using the following URLs and none of them worked:
1. idstore.com
2. ldap://idstore.com
3. ldap://idstore.com:6501
4. ldap://ovdhost01:6501,ldap://ovdhost01:6501
Can someone help me know the correct URL to be used in this case?
Thanks,
$id
Not sure about OVD or OID but for SOA and OIM:
SOA:
XMLConfig -> XMLConfig.SOAConfig -> SOAConfig
Rmiurl -> t3://soahost1:soaport1,soahost2:soaport2
Soapurl -> Load balancer or web server url (without the /workflow context)
OIM:
XMLConfig -> XMLConfig.DiscoveryConfig -> Discovery
OimFrontEndUrl -> Load balance or web server url (without the /oim context)
And ofcourse on your LB or WebServer, you need to configure these:
SOA: http://docs.oracle.com/cd/E23943_01/core.1111/e10106/ha_soa.htm#CHDDJEGD
OIM: http://docs.oracle.com/cd/E21764_01/core.1111/e10106/imha.htm#BGBDFEIE
-Bikash
Similar Messages
-
High availability for file server and exchange with 2 physical servers
Dear Experts,
I have 2 physical server with local disks only. I want to setup below on same with high availability, please advise best prossible options. We will be using windows 2012 R2 Server..
1. Domain controller
2. Exchange 2013
As of now I am thinking of setting up below:
1. Install Hyper-v on both and create 3 VM on each as
-On Host A- 1 VM for DC, 1 VM for File server with DFS namespace and replication for file server HA and 1 VM for Exchange 2013 with CAS/MBX with DAG and DNS RR for Exchange HA
-On Host B - 1 VM for ADC, 1 VM for File server DFS member for above and 1 VM for Exchange 2013 CAS/MBX with DAG member
I have read on internet about new features called scale out file server (SoFS) in Windows 2012 Server but not sure that will be preferred for file sharing.
Any advise will be highly appreciated..
Thanks for the help in advance..
Best regards,Dear Experts,
I have 2 physical server with local disks only. I want to setup below on same with high availability, please advise best prossible options. We will be using windows 2012 R2 Server..
1. Domain controller
2. Exchange 2013
As of now I am thinking of setting up below:
1. Install Hyper-v on both and create 3 VM on each as
-On Host A- 1 VM for DC, 1 VM for File server with DFS namespace and replication for file server HA and 1 VM for Exchange 2013 with CAS/MBX with DAG and DNS RR for Exchange HA
-On Host B - 1 VM for ADC, 1 VM for File server DFS member for above and 1 VM for Exchange 2013 CAS/MBX with DAG member
I have read on internet about new features called scale out file server (SoFS) in Windows 2012 Server but not sure that will be preferred for file sharing.
Any advise will be highly appreciated..
Thanks for the help in advance..
Best regards,
DFS is by far the best way to implement any sort of file server. Because a) failover is not fully transparent and does not happen always (say not on copy ) b) DFS cannot replicate open files so if you edit a big file and have node rebooted you're going to
lose ALL transactions/updates you've applied c) actually slows down the config. See:
DFS for failover
http://help.globalscape.com/help/wafs3/using_microsoft_dfs_for_failover.htm
DFS FAQ
http://technet.microsoft.com/library/cc773238(WS.10).aspx
(check "open files" point here)
DFS Performance
http://blogs.technet.com/b/filecab/archive/2009/08/22/windows-server-dfs-namespaces-performance-and-scalability.aspx
SoFS a) requires shared storage to run and you don't have one b) does not support generic workloads
(only Hyper-V and SQL Server) and c) technically makes sense to expand SAS JBOD or existing FC SAN to numerous Hyper-V clients over 10 GbE w/o need to invest money into SAS switches and HBAs and FC HBAs and new licenses FC ports. Making long story short:
SoFS is NOT YOUR CASE.
SoFS Overview
http://technet.microsoft.com/en-us/library/hh831349.aspx
http://www.aidanfinn.com/?p=12786
http://www.aidanfinn.com/?p=12786
For now you need to find some shared storage to be a back end for your hypevisor config (SAS JBOD from supported list, virtual SAN from multiple vendors like for example StarWind see below, make sure you review ALL the vendors) and then you create a failover
SMB 3.0 share for your file server workload. See:
Clustered Storage Spaces over SAS JBOD
http://technet.microsoft.com/en-us/library/jj822937.aspx
Virtual SAN from inexpensive SATA and no SAS or FC
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
Failover
SMB File Server in Windows Server 2012 R2
http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
Fault
tolerant file server on just a pair of nodes
http://www.starwindsoftware.com/ns-configuring-ha-file-server-for-smb-nas
For Exchange you use SMB share from above for a file share witness and use DAG. See:
Exchange DAG
Good luck! Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
High Availability for EBS Database 11gR2
Hello Gurus,
We have the below environment:
Oracle Applications - 12.1.3
Oracle Database - 11.2.0.3
OS - Oracle Enterprise Linux 5.7
I would like to know how to achieve high availability for the database. We don't want to go with RAC at this stage. What are the other alternatives to achieve high availability at the database side.
Thanks in advance!
-KhanI have come across the note id
How To Install An Oracle Database In An Active/Passive Configuration Without RAC? [ID 734361.1]
Can you please confirm if this can be used to configure Database for HA?
Also please confirm if I need to get the two servers configured with any cluster software at Linux level? -
High availability for Lync 2013 persistent chat server and office web app server
I have 1500 users, need HA in primary data center and DR also. looking for HA and DR solution for persistent chat server and office web app server.
is below correct?
1. 2 persistent chat server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
2. 2 Office web app server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
also do i need HLB for both roles?1) In Lync Server 2013, there are improvements in both high availability and disaster recovery:
High availability improvements: SQL Server mirroring is used to provide high availability for the Persistent Chat Server content database and Persistent Chat compliance database within a data center (in-site).
Disaster recovery improvements: Persistent Chat Server supports a stretched pool architecture that enables a single Persistent Chat Server pool to be stretched across two sites (that is, a single logical pool in the topology, with servers in the pool physically
located across two sites). SQL Server Log Shipping is used for cross-site disaster recovery.
For more information about high availability and disaster recovery, see
Configuring Persistent Chat Server for High Availability and Disaster Recovery in the Deployment documentation.
2) for HA & DR, you can 2 Office web app server in a pool of primary data center and 1 in DR. and You will need HLB for office web app servers
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
High Availability for Existing Single Exchange Server holding Multiple Domains
Hi,
I'm trying to implement solution for Backup/Redundancy/High-availability for the existing Exchange Server 2013.
Currently the Exchange Server 2013 deployed on 2012 Server is holding 4 Domains (1 internal domain & 3 public/published domains). The Exchange Server is hosted Internally & published to send & receive mails from the SMTP relay(Third party
resides on internet) server. Client Access & Mailbox Services are on the same server.
Please advice me which is the best scenario to implement a backup/redundancy/high-availability for the current server.
Thanks in advance.
Regards
Roopesh SHi,
The following links will help.
High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638137(v=exchg.150).aspx
Deploying High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638129(v=exchg.150).aspx
Planning for High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638104(v=exchg.150).aspx
Backup, Restore, and Disaster Recovery
http://technet.microsoft.com/en-us/library/dd876874(v=exchg.150).aspx
ecsword -
What is the use of 'is available for Everyone'
anyone please tell me what is the use of 'is available for queries' in the BMM layer.
Explain with example is appriciated.
Thank you.Hi Viswa,
For the 'text' property of UI Element, you can provide a fixed value or bind it to context attribute of type String.
If you provide some fixed value for the text, you can set the width property accordingly.
The 'wrapping' property makes more sense when you have binded the 'text' property to some context attribute & you do not know the length of the text beforehand (text value may be coming from backend).
There you can provide value for 'width' property & set 'wrapping' = true, so that fixed text length is visible.
I think another use case scenario can be if you wish to resize the application window, you can adjust the space taken by the label using width & wrapping properties (resizing window does not have an impact)
Hope this clarifies your doubt.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 15, 2009 12:14 PM -
How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP server
In 9iAS 9.0.2 Oracle HTTP Server (OHS) is pre-configured to assign requests to the Home OC4J instance via the URL-prefix "/j2ee"/
For example, the TEST servlet under OC4J would be passed through OHS using:
http://urmachine:urApachePort/j2ee/TEST
whereas in the standlone OC4J version, this URL works:
http://urmachine:urOC4JPort/TEST
How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP Server?It is getting the url prefix from mod_oc4j.conf
under /ora9ias/Apache/Apache/conf
You can read more on this at
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a92173/confmods.htm#1008977
-Prasad -
Is OIM 10.x available for WebLogic Server?
Is OIM 10.x available for WebLogic server? The only download I see on the site for OIM 10.x is the fully bundled suite with OracleAS.
If by OIM you mean Oracle Identity Manager, then OIM 9.1 is supported on Weblogic 10.x. OIM 9.1 is NOT part of or the same thing as Oracle Identity Management 10g. The latter is a set of services tightly coupled with Oracle's app server (OC4J). Identity Management 10g does not run on Weblogic. Some people like to say that Identity Management 10g includes all Oracle identity management products which adds to the confusion.
Look here: http://www.oracle.com/technology/documentation/oim1014.html -
Is there a 32 Bit edition available for windows server 2012 and windows server 2008
Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
AhmedHi,
Quote:
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Can I use WindowsAzure NuGet package for Windows Server development?
Which Nuget package should I be using when developing a service that uses the Service Bus for Windows Server 1.1?
I've been using the 'ServiceBus.v1_1' package up to now, but on a whim tried using the 'WindowsAzure.ServiceBus' package and that appears to be working for a basic program:
var namespaceManager = NamespaceManager.Create();
var messagingFactory = MessagingFactory.Create();
var sub = messagingFactory.CreateQueueClient("queue");
sub.RegisterSessionHandler(typeof(MySessionHandler));
The reason I want to use this is as above - I want to use the RegisterSessionHandler feature to manage my sessions for me, but this functionality appears to be missing in the Service Bus 1.1 package.
If I avoid using the newer, unsupported Azure features, should I be safe using this package?I can't speak to teh display quality of Office for Windows 2010 on a Retina display, but I'm successfully running Parallels 8 with Windows XP and Office 2010 - no problems with VBA at all.
But let's hear from the Retina owners - I wouldn't think that you'd have any problems.
Clinton -
End of support dates for Directory Server
does anyone know where I can find an end of support matrix for Directory Server ? We are still running 5.1sp4.....Thanks
Is this information publicly available? I am interested in this as well...
Thanks -
Compatible tomcat version for Directory server 6.3
Dear All,
Could someone please tell me which version of Tomcat will be the compatible for Directory Server 6.3. And i am new to this directory server environment, here i need to install tomcat too so kindly send me the steps for installing tomcat. Thanks!
Regards,
KarthikHi Karthik,
Directory Server 6.3 Control Center has been released many years ago, so it has been certified (so this means that IT IS OFFICIALLY SUPPORTED) on the most common application servers at that time, so Tomcat 5.5 and Sun App Server 8.2.
Personally I've run the DSCC also on the latest releases of Tomcat (6.0.35 at the time of writing) and Glassfish (2.1.1 series) for test deployments absolutely fine; but in case of issues, if you want your solution to be 'officially supported' by Oracle, you've got to reproduce the problem on the supported app servers in the compatibility matrix.
HTH,
marco
P.S.: also Directory Server 6.3 is getting older and older... at least try to get the latest patch: 6.3.1.1.1
http://docs.oracle.com/cd/E19261-01/E26994/html/index.html
The latest release is now 11.1.1.5.0 if you don't have any architectural/sw compatibility constraint, try to move/migrate to a more recent release -
11.1.2 High Availability for HSS LCM
Hello All,
Has anyone out there successfully exported an LCM artifact (Native Users) through Shared Services console to the OS file system (<oracle_home>\user_projects\epmsystem1\import_export) when Shared Services is High Available through a load balancer?
My current configuration is two load balanced Shared Services servers using the same HSS repository. Everything works perfectly everywhere except when I try to export anything through LCM from the HSS web console. I have shared out the import_export folder on server 1. And I have edited the oracle_home>\user_projects\epmsystem1\config\FoundationServices1\migration.properties file on the second server to point to the share on the first server. Here is a cut and paste of the migration.properties file from server2.
grouping.size=100
grouping.size_unknown_artifact_count=10000
grouping.group_by_type=Y
report.enabled=Y
report.folder_path=<epm_oracle_instance>/diagnostics/logs/migration/reports
fileSystem.friendlyNames=false
msr.queue.size=200
msr.queue.waittime=60
group.count=10000
double-encoding=true
export.group.count = 30
import.group.count = 10000
filesystem.artifact.path=\\server1\import_export
I perform an export of just the native users to the file system, the export fails stating and I find errors in the log stating the following.
[2011-03-29T20:20:45.405-07:00] [EPMLCM] [NOTIFICATION] [EPMLCM-11001] [oracle.EPMLCM] [tid: 10] [ecid: 0000Iw4ll2fApIOpqg4EyY1D^e6D000000,0] [arg: /server1/import_export/msr/PKG_34.xml] Executing package file - /server1/import_export/msr/PKG_34.xml
[2011-03-29T20:20:45.530-07:00] [EPMLCM] [ERROR] [EPMLCM-12097] [oracle.EPMLCM] [tid: 10] [ecid: 0000Iw4ll2fApIOpqg4EyY1D^e6D000000,0] [SRC_CLASS: com.hyperion.lcm.clu.CLUProcessor] [SRC_METHOD: execute:?] Cannot find the migration definition file in the specified file path - /server1/import_export/msr/PKG_34.xml.
[2011-03-29T20:20:45.546-07:00] [EPMLCM] [NOTIFICATION] [EPMLCM-11000] [oracle.EPMLCM] [tid: 10] [ecid: 0000Iw4ll2fApIOpqg4EyY1D^e6D000000,0] [arg: Completed with failures.] Migration Status - Completed with failures.
I go and look for the path that it is searching for "/server1/import_export/msr/PKG_34.xml" and find that this file does exist, it was infact created by the export process so I know that it is able to find the correct location, but it then says that it can't find it after the fact. I have tried creating mapped drives and editing the migration.properties file to reference the mapped drive but it gives me the same errors but with the new path. I also tried the below article that I found in support with no result. Please advise, thank you.
Bug 11683769: LCM MIGRATIONS FAIL WHEN HSS IS SET UP FOR HA AND HSS IS STARTED AS A SERVICE
Bug Attributes
Type B - Defect Fixed in Product Version 11.1.2.0.000PSE
Severity 3 - Minimal Loss of Service Product Version 11.1.2.0.00
Status 90 - Closed, Verified by Filer Platform 233 - Microsoft Windows x64 (64-bit)
Created 25-Jan-2011 Platform Version 2003 R2
Updated 24-Feb-2011 Base Bug 11696634
Database Version 2005
Affects Platforms Generic
Product Source Oracle
Related Products
Line - Family -
Area - Product 4482 - Hyperion Lifecycle Management
Hdr: 11683769 2005 SHRDSRVC 11.1.2.0.00 PRODID-4482 PORTID-233 11696634Abstract: LCM MIGRATIONS FAIL WHEN HSS IS SET UP FOR HA AND HSS IS STARTED AS A SERVICE*** 01/25/11 05:15 pm ***Hyperion Foundation Services is set up for high availability. Lifecycle management migrations fail when running Hyperion Foundation Services - Managed Server as a Windows Service. We applied the following configuration changes:Set up shared disk then we modify the migration.properties.filesystem.artifact.path=\\<servername>\LCM\import_export We are able to get the migrations to work if we set filesystem.artifact.path=V:\import_export (a maped drive to the shared disk) and we run Hyperion Foundation Services in console mode.*** 01/25/11 05:24 pm *** *** 01/28/11 03:32 pm *** (CHG: Sta->11)*** 01/28/11 03:32 pm *** (CHG: Comp. Ver-> 11.1.2 -> 11.1.2.0.00)*** 01/28/11 03:34 pm *** (CHG: Base Bug-> NULL -> 11696634)*** 02/02/11 01:53 pm *** (CHG: Sta->41)*** 02/02/11 01:53 pm ****** 02/02/11 05:18 pm ****** 02/03/11 10:30 am ****** 02/04/11 03:53 pm *** *** 02/04/11 03:53 pm *** (CHG: Sta->80 Asg->NEW OWNER)*** 02/10/11 08:49 am ****** 02/15/11 11:59 am ****** 02/15/11 04:56 pm ****** 02/16/11 09:58 am *** (CHG: Sta->90)*** 02/16/11 09:58 am ****** 02/16/11 02:12 pm *** (CHG: Sta->93)*** 02/24/11 06:14 pm *** (CHG: Sta->90)Back to topit is not possible to implement a kind of HA between two different appliances 3315 and 3395.
A node in HA can have the 3 persona.
Suppose Node A (Admin(primary), monitoring(Primary) and PSN).
Node B(Admin(Secondary), Monitoring(Secondary) and PSN).
If the Node A is unavailable, you will have to promote manually the Admin role to Primary.
Although the best way is to have
Node A Admin(Primary), Monitoring(Secondary) and PSN
Node B Admin(Secondary), Monitoring (Primary) and PSN.
Rate if helpful and Marked As correct if it is correct for the experts.
Regards, -
HIGH AVAILABILITY for ORACLE E-Business Suite
hai..
i am new to oracle apps administraion.i would like to know one thing.i now how to mantain high availability in the database using rac, dataguard and other concepts.but i would like to know how to mantaing high availability in oracle e-busines suite. is there any clustering concetps in apps? bcas at the database level using rac we can configure number of instances. here is it possible to mantian two or more web or forms..servers simultaneously using clustering concepts? any related papers or there? please guide me.
thanks..
srinivas pvsMaximum Availability Architecture (MMA) and Solutions for Oracle Apps 11i can be found in the following links:
Note: 403347.1 - Maximum Availability Architecture and Oracle E-Business Suite Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=403347.1
Note: 207159.1 - Oracle E-Business Suite Release 11i Technology Stack Documentation Roadmap
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=207159.1 -
High availability for AS forms & Reports
Hi,
i like to know the best solution for high availability of Oracle Application Server(10g) Forms & Reports Services ...as load balancing is not done for forms & reports with the oracle high availability solution( i guess i am rite).any suggestions
thanks
mishWell, install Oracle AS Forms and Reports on two different nodes and configure your Forms and Reports services on both of them. Use a virtual host configuration to load balance (by hardware load balancer) to both hosts which are the resources. Use the webcache (standalone or the one that came with the install) to map the virtual host to the resources on the two hosts. Use REPORTS_SERVERMAP to map the name of the 'cluster' reports server to the local reports server, ie REPORTS_SERVERMAP=app:app1 on node 1 and REPORTS_SERVERMAP=app:app2 on node 2. Use REPORTS_SERVERMAP=app:app1;appl:appl1 to add more applications/reportservers. Set REPORTS_SERVERMAP in O_H/forms/servers/default.env and the application env files and under O_H/reports/conf/rwservlet.properties.
Maybe you are looking for
-
How do I transfer music from one ipod to another?
Hello, I need help transferring music from one ipod to another? I got a new laptop and now my itunes library does not contain a lot of my music!
-
My computer will not install new version of itunes
I have uninstalled the new version and my computer will not install
-
Multiple Wireless Connections?
We recently moved into a friend's house (temporarily, thank goodness!) and they already have a Windows-based wireless network in place. Their wireless router is some sort of Cisco/LinkSys device. Our two iMacs and my MacBook Air connect to the Intern
-
Password reset is disabled. Expired password does not cause reset prompt o
Server: Oracle 11.2 on Linux Redhat 64-bit. Installed 32-bit 11.2 Oracle full client on Windows 7 64-bit workstation. Setting up user to test expired password promp capability of SQLDeveloper 3.0.0.4. So far, failing every time. Password Reset on men
-
Creating DB - stuck at 85%.....help?
while installin 8i PE, in minimal mode, the progress bar hangs at 85 % (creating database) i waited for abt 25 min.... no progres.... thanks... sundar