URL to content server from BI WAD not working

Hello,
I'm facing a problem using BI WAD in the portal ( Portal 7.0). When trying to jump from a BI WAD to display a scanned document hold in the content server( using signed URL generated by the function 'SCMS_URL_GENERATE'), a new window opens but the URL is cut.
For example:
Trying to reach :
http://SUP-CS-60.admin.ulb.priv:1090/ContentServer/ContentServer.dll?get&pVe
rsion=0046&contRep=DE&docId=E09738751CB99BF19B8B00155D483527&compId=data&acc
essMode=r&authId=CN%3DB30&expiration=20110622150040&secKey=MIH4BgkqhkiG9w0BB
wKggeowgecCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxzCBxAIBATAZMA4xDDAKBgNVB
AMTA0IzMAIHIAkJCBgYMDAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcB
gkqhkiG9w0BCQUxDxcNMTEwNjIyMTMwMDQwWjAjBgkqhkiG9w0BCQQxFgQU8P%2BvgmFvUZe%2Fk
qyCi%2FGDeYl53BUwCQYHKoZIzjgEAwQvMC0CFC2S6mG8sd%2F5km%2BIL%2FpDL1IXt7KpAhUA0
i5y3%2Fz5n%2F7E8FnSbpvbY5qxc6g%3D
Shows a new window with :
http://SUP-CS-60.admin.ulb.priv:1090/ContentServer/ContentServer.dll?
But of course no document is shown. It seems like the parameters are gone from the URL.
(The URL is not to be suspected as it is working from BEX Analyser. So it seems like the URL is well generated but cut when the portal is making the jump to the Content Server).
Any idea of what could be done to resolve this?
Thanks and best regards,
Thomas

Hello,
I'm still stuck with this problem.
A related question maybe easier:
Is it possible from a WAD to open a document from the Content Server?
Thanks,
Thomas

Similar Messages

TREX/Content Server: Full text searches not working

I've setup TREX and Content Server in a sandbox environment and have been trying to get my head around DMS. I've completed what I've believed are the required steps (outlined below) and I have submitted 12 documents of various types into the respository. I'm able to perform meta data searches but not full text searched. Any ideas what I might have missed?
Much thanks!!!!
/Greg
0. Defined connection to TREX Server: TREX_42 (SM59); Using TREXADMIN all services are green.
1. "Define Document Area" - DMS is present; assumed I would use this one.
2. "Defined Indexing Readiness" - selected "Index Release" & "Classify" for DMS; set "Search Srv" to DMS_TEST
3. "Define Content Respository" - Created Z_CR_001 and maintained it as follows:
- Documentation Area: Document Management System
- Storage Type: HTTP content server
- HTTP Server: srv-sptxd2-dal.intervoice.int (content server)
- Port: 1090
- HTTP Script: ContentServer/ContentServer.dll
- Physical Path: /usr/sap/IRD/SYS/global/
4. "Define Content Categories" - Created ZCSSTRUCT; maintained as follows:
- Document Area: DMS
- Content Rep: Z_CR_001
5. Checked CSADMIN for Z_CR_001 - All Green
6. Went into SKPR07 (monitoring tab); entered DMS_PCD1 and "Indexing possible", "Auto indexing" and "DocArea activated" is all green.
7. Went into SMRO
- created SSR: "Search Server ID" = DMS_TEST, "Search engine" = DRFUZZY
- Verified "RFC Destinations"; passed tests; all green.
8. Went into SKPR07; using DMS_PCD1 as document class.
- executed "Clean up table entries"
- deselected "Limited to selected language"
- executed reindex. "Copied successfully from search engine"
- Selected the created index category
- Set the "Document area" indicator
- execute "Trigger process"; 12 documents referenced
9. Going into TREXADMIN I can see the created index; however the document count = 0. Also there is no queue created -- should there be?
Edited by: Greg Preston on Aug 5, 2009 9:11 PM

Dear
this link will help you,
TREX Architecture
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/71/b26b2bfdc4eb47ab5432e8444290ce/content.htm
File Formats Supported by TREX
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/55/cb634114b78047e10000000a1550b0/content.htm
Detail about TREX Configuration (Basic to advance)
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/46/bab1d48b0a1514e10000000a114a6b/content.htm
Regards
Tushar Dave
Edited by: Tushar Dave on Aug 6, 2009 9:59 AM

Using MS-Sharepoint as a content server from ECC 6.0

Hi, gurus.
From the
[SAP Content Server Installation Guide|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/cfa73246-0a01-0010-71b4-bc21ccb45c99&overridelayout=true]
...you will find this information:
You can find a description of the SAP Content Server Interface in the SAP Library (on the documentation CD or under www.//help.sap.com) under SAP Web Application Server u2192 Basis Services u2192 Knowledge Provider u2192 Content Management Service u2192 SAP Content Server HTTP Interface. If you want to integrate another content server into your network, the new content server must fulfil the requirements of the interface.
My simple question is:
Is it possible to use MS Sharepoint as a content server from ECC 6.0 ?
Please advice.

Hi Athol,
Thanks very much, your answers are very helpful.
To use SharePoint as SAP DMS for document management. We have depend on the 3rd party products like iNet.DM from ERP.Link or Duet Enterprise and separate licenses required for products?
Without this 3rd party products, it is not possible to use SharePoint as SAP DMS?
What is best and cost effective way of achieving this requirement?
Thanks and Regards,
Venky.

Upload / Download document to KM Content Server from WebDynpro Application

I have a requirement where I need to upload / download document into / from KM Content Server from my WebDynpro Application.
Is it technically possible and if Yes, can I get any Sample code for this.

Hi Tahzeeb,
first of all i would point you to the JavaDocs for KMC API.
https://media.sdn.sap.com/javadocs/NW04/SPS15/km/index.html
And here is a small example of reading and storing KM resources.
For reading:
     * Returns a resource as an InputStream from the KM repository
     * at the given path. The IUser is needed for authorization.
     * @param user      IUser for checking authorisation.
     * @param resPath   Path to the KM resource.
     * @return          Requested resource as a stream.
    private InputStream getKmResource(final IUser user, final String resPath)
        throws ResourceAccessException {
        try {
            final IResourceFactory factory = ResourceFactory.getInstance();
            final RID rid = RID.getRID(resPath);
            final IResource kmResource =
                factory.getResource(
                    rid,
                    new ResourceContext(getDeprecatedIUser(user)));
            if (kmResource == null) {
                throw new ResourceNotFoundException(
                    "KM resource not found: " + resPath,
                    resPath);
            return kmResource.getContent().getInputStream();
        catch (WcmException e) {
            throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
And for writing:
     * Stores a resource in the KM repository at the given path with the given name and mimetype.
     * Content is taken from the given inputstream.
     * @param user          IUser for checking authorisation.
     * @param resName   Name of the resource
     * @param resPath     Path to the resource
     * @param mimeType MimeType of the resource
     * @param inputStream Resource content
     * @throws ResourceAccessException
    private void putKmResource(
        final IUser user,
        final String resName,
        final String resPath,
        final String mimeType,
        final InputStream inputStream)
        throws ResourceAccessException {
        try {
            final ResourceContext rContext = new ResourceContext(getDeprecatedIUser(user));
            final RID rid = RID.getRID(resPath);
            final ICollection kmCollection =
                (ICollection) ResourceFactory.getInstance().getResource(rid, rContext);
            if (kmCollection == null) {
                throw new ResourceNotFoundException(
                    "KM resource not found: " + resPath,
                    resPath);
            else {
                IContent kmContent = new Content(inputStream, mimeType, -1);
                IResource kmResource = kmCollection.createResource(resName, null, kmContent);
        catch (ResourceException e) {
            throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
        finally {
            try {
                inputStream.close();
            catch (IOException e1) {
                throw new ResourceAccessException("Error closing InputStream when accessing " + resPath, e1, resPath);
Hope that helps for a start.
Best regards,
ok

Open/edit documents on SAP Content Server from BW?

Hi guys
I have been asked to investigate whether this scenario is possible.
Today we have a SAP Content Server where we save attachments to different kinds of objects. An example could be that we open appropriation request 'S-00123' from IMA11 and attach two different MS Word documents.
In BW I have created several reports that contain these appropriation requests and we would like to be able to attach/edit the files on the content server from the BW report.
Is this somehow possible using RRI or some other functionality?
Might it even be possible by using GoTo --> Documents with the appropriate setup?
BR
Stefan

Hello Friends,
Any luck??
Thank you,
Nikee

Content query web part is not working after chaning the DNS entry

Hi all,
We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
quey server its not working fine and its giving error message as bellow.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
web part is added to the page the fallowing error message is displayed.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

Data Services- The job server you selected is not working

Long Text:
After logging in to the Data Services designer,when try to run a job it shows error -The job server you selected is not working
Latest Software version -BODS 4.0 SP2
Reproduce Steps:
1. Double click on the Project from repository, it will display the project in Project area.
2. After that it will display all the jobs under the project.
3.Right click on the job and try to execute, then it will display the "Execution Properties" windows.
Here the we can the default Job Server has been selected.
4. Try to click ok to execute the job and then we get the error-"The job server you selected is not working"

Hi
Please contact your Data services administrator to check on the server why the job server is not working.
There might be several issues like connectivity with the repository, access details , mapping in the management console etc.
And let us know the exact issue.
Regards
Puneet

Consuming PI Webservice from Webdynpro Java Not working

Hello SAP,
Environment: CE 7.2.
Resolution expected immediately, Helpful answer is highly appreciated.
Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
Options tried so far:
1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
3) Changing the Business Systems in PI and there after calling the service - Not worked
4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
For all the Options, I am facing the same error which is provided in the screenshot.
Below procedure which I have followed for calling the PI Webservice:
1) Created Adaptive Webservice Model
2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
3) Selected Option - No Service Group Configuration
4) Provided Logical Destination
6) Completed creation of Model
7) Added the model as a UsedModel
8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
10) Build the project.
11) Activated the code and Run the Application.
12) Getting the below error which is showed in the message.
ERROR MESSAGE:
Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

Hi Sankar,
If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
Please check the code for initialization and execution for the webservice and then test it.
Best Regards,
Arun Jaiswal

Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

Hello,
I would like to ask a question, hopeing it is resolved in some way and i missed it.
I have installed SP3 Rollup 4 on our Exchange 2010 server.
This added 2 new Powershell commands
Get-MailboxSentItemsConfiguration
Set-MailboxSentItemsConfiguration
This can be used to manipulate where mail is stored in the send items.
Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
What we really want it to use the From only way.
We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
Here is is stated on 1 July 2013
http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
That was on 26 March 2013
http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
Looking foward to any replies.
Kind regards,
Jeroen van Velzen

I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
but the other does.
If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
the shared mailbox you will see it in Deleted items folder of the shared mailbox.
The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
This was accomplished without using the Set-MailboxSentItemsConfiguration command.
We are running Exchange 2010 SP3 RU4.

Server side mailrules are not working!

Hi,
on my Lion Server the server side mailrules are not working.
I created about 4 different rules via the webmail interface but none of them are applied to incoming mails :-/
They were working back in the days I used 10.5 and 10.6 Server (this was not upgraded!).
Are server side mailrules are working for you?
Any assistance would be appreciated.
Regards,
Eldrik

Nevermind... got it sorted out..
My rules are based on the senders email address and switching from "is equal" to "contains" (sorry only got the translation from German) did the trick!
Greetz
Eldrik

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

   Hello to all, there are two confliting articles about this topic:
   1-
http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
Server 2008 R2 domains". This article was updated in 2013.
   2-
http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
2010 and was refered by the first one.
   What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
   Regards, EEOC.

Hi,
I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
However, the best method for you is make a lab to test the problem firstly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

How can I make sure an url to connect to a webinar will not work in another browser?

How can I make sure an url to connect to a webinar will not work in another browser? The url is using a session cookie instead of username/password to authenticate the user and has the following form: /r5ygd62w5za/?session=breezrek22zu756wgzy8r&launcher=false&refresh_parent=true

Try the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint] add-on, it gives greater control over the zoom options.

URL to content server from BI WAD not working

Similar Messages

Maybe you are looking for