URM 11g adapter for File Share

Hi All,
Has anyone tried to setup a URM 11g adapter for File Share/system. I could not get any documentation on this for 11g. There is 10g documentation which I tried but could not proceed much. If someone could point to an admin guide for 11g adapter that would be of great help.
Thanks,
- Anand

10g adapters work with 11g as well!
- Sudha

Similar Messages

URM Adapter for File System issue.

Hi, I am just starting out on using the URM Adapter for File System and I have a few questions about issues I am facing.
1. When I try to create multiple searches and map them to Folders/Retention Categories in URM, it does not work. I am able to map one search via one URM source to one Folder/Retention Category (without my custom attribute from question 1). However in Adapter’s Search Preview I am able to perform a search on the documents successfully. Would different searches require different URM sources in Adapter?
2. Does the adapter work with other Custom Attributes? I have added an attribute in addition and in the same way as "URMCrawlTimeGMT" is added in Oracle Secure Enterprise Search (I created a custom Document Service and Pipeline to add a metadata value) and in the URM Adapter’s config.properties file and when I create a search in Adapter based on the custom attribute, it does not map the documents into URM. I am however able to search the documents in Adapter’s Search Preview window with the custom attribute displaying correctly.
Any help with this topic would be really appreciated. Thank you.
Regards,
Amar

Hi Srinath,
Thanks for the response, as to your questions,
1. I am not sure how to enable Records Manager in adapter mode. But I am able to login to the Records Manager web page after starting it up through StartManagedWebLogic.cmd URM_server1.
2. The contents of the file system should be searchable in Records Manager, and should be able to apply retention policies to the documents in the file system, I do not need to have SES, but apparently the adapter needs to have SES as a pre requisite.
Upon further investigation I found that in the AGENT_DATA table the values being inserted were "User ID"(UA_KEY) and NULL(UA_VALUE), so I just made the UA_VALUE column nullable and I was able to pass that step. Is this the wrong approach to fix the issue.
Could you please let me know about enabling Records Manager in adapter mode, I am not able to find documentation online, I have been through the Adapter installation and administration guides. Thank you once again.
Regards,
Amar

NIC configuration for File Share Witness server

Best practices for a DAG is segment the MAPI or production network and the replication network. On the mailbox servers that are members of a DAG, we have two NICs that are configured differently.
What about the server with the File Share Witness (in my case, we are using a file server, there is not an extra Hub Transport server available).
Should this server be configured for two networks as well?
I'm thinking that the heartbeat traffic would be on the replication network? Or not?
I've read numerous documentation on the subject (Technet, MSExchange, ExchangeServerPro, SimpleTalk, etc..) and have never noticed a section about configuring dual NICs on the FSW server. Which leads me to think... that it is actually the "regular"
NIC that is used.
Can anyone confirm that?
Thanks in advance!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Right, FSW server doesn't need multiple NICs... FSW server is to just give a vote when you have even number of DAG members to make majority. Exchange is going to just lock a small file on the FSW server on the Witness directory, that is all...

Options for File Share

I have a px12 device, and i am looking into migrating data over to this device. the question i have is what is the best way to access the new location to turn this into my file server.
our px12 device is going to be in a central hosted location, and we access files from a Terminal Server, through VPNs, and through Remote Web Workplace.
I have setup an iSCSI the perfomance is great, but it is tied to one server, and that is not what i am looking for. We can do the standard Network share, but the speed on transfers is not the best.
Is there any options between netwrok share and iSCSI that gives good performance on speed?

NFS has the same speed as ISCSI and can connect from the different location you menitioned. NFS is cumbersome when it comes to connecting to Windows. We would not be able to walk you through setting up NFS but if your IT department is familar with it, most likely would work better than ISCSI.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Prefer HTTP or SOAP Adapter for file upload

Hi,
I have the following scenario:
Data (about 50 MB) is sent to PI and should get uploaded as file to a third party system.
I don't want to the use the File Adapter as I would have to use the FTP protocol and then have to install a FTP server.
On the third party system exists already a Web service for uploading files (in this case I would take the SOAP Adapter).
Another possibility would be to transfer the data with the HTTP Adapter.
My question is what are advantages and disadvantages of transferring the data to the third party system with the HTTP Adapter and respectively with the SOAP Adapter.
Thanks and regards
Patrick

Hi,
thanks for your answer, but most of threads say only that SOAP Adapter is for communication with Web services and HTTP not.
I know this already and in my case I can use both Adapters for the same task and want to know which I should choose in this case.
Like which one is maybe faster, more reliable, practicable , better for large files...
Regards
Patrick

Connecting to PC"s for file shares with SL

I am not able to connect to my PC thru the network 1/2 the time it does not even see the PC but the PC sees it fine if it sees the PC it can't connect. but if I boot into 10.5 off of my USB HDD I can connect just fine to the PC and get to the files. it is pretty frustrating SL is faster but some things just don't work the way they should

Can you give some more information about the LaCie drive and the computer? How big is the drive? What interface is it (i.e. USB, FireWire, etc.)? What are the specs of the G4?

How to create Headervariable for File adapter in 11g SOA Suite?

Hi All
My process in reading file and I wanted to know the exact name of the File.
In 10g, we have fileAdapterInboundHeader.wsdl and create HeaderVariable using message type used in this wsdl and can get file and directory name in this variable But in 11g we dont have any wsdl like this.
Can anybody give me some idea how to create Headervariable for Inbound file adapter to get file name?
Thanks
Vibzz

Hi,
Look at this document : [Oracle JCA Adapter for Files/FTP|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAFJCCE]
Romain.

Dynamic update to Inbound Directory for File Adapter Read

I've seen references to others asking similar questions but never a good answer.
I have a process that outputs files into daily dated directories. In other words, my Inbound Direct name is dynamic. I would like BPEL to be able to pick up these files but the Directory Spec for the inbound file adapter seems to be set at design time (or in the case of a Logical Directory Deployment time).
The directory names are in YYYMMDD format. So it would be:
importdir/YYYMMDD
for each day.
Is there a way I can monitor an entire subtree, or have some event that triggers the directory name to be updated (for instance, a process watches the parent directory and kicks off when a new directory is created), or any other method I can inform the FileAdapter to begin polling a different directory.
Thanks.

Hi,
Look at this document : [Oracle JCA Adapter for Files/FTP|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAFJCCE]
Romain.

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

File Share crawl - NetApp Servers - Permission Issues

hello,
There are many file share contents hosted on NetApp, which are being crawled by the SharePoint 2013 Search engine in our organization.
The Search Crawl account is granted Read and Execute permissions on the Shared Drive. The crawler reads the content and the permissions correctly for the first time.
But once the permissions are modified, like adding new users or removing the existing users, and after triggering a full crawl, the changes w.r.t permissions are not being reflected on the sharepoint search results. However, the same scenario works fine
on a local windows shared drive.
I have learnt that the crawl account should be a part of the group policy Manage Audting and permissions, but also learnt that NetApp doesnt have such a thing. I hope am not the only one with such an issue. Please suggest.
Sreeharsha Alagani | MCTS Sharepoint 2010 |
Linkedin | Blog

Hi Sreeharsha,
As I understand, you are using NetApp for file share, and you would like to know about permission needed for crawl files.
Since the issue is related to third party product, there is no sufficient resource here. Please contact their support engineer. For your convenience:
https://communities.netapp.com/welcome
In addition, I found some articles might help:
https://communities.netapp.com/community/netapp-blogs/msenviro/blog/2013/10/30/best-practices-for-sharepoint-2013-search-service-application-for-smsp
https://kb.netapp.com/support/index?page=content&id=3013718&pmv=print&impressions=false
Regards,
Rebecca Tu
TechNet Community Support

IMac file share with an Imerge s3000 server.

I cannot get ny mac to connect with an Imerge s3000 music server. I can operate the system through the mac using the TV interface but I cannot share files. The server is recognised by the mac on the network but each time I try to access the files it reports connection failed. I need to access the files for backup and storing downloaded music. I have followed all the instrctions but all goes well until the last step of opening the files.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

Configuring quorum file share witness access denied

in failover cluster administrator, when I try to configure the quorum for file share witness, it keeps coming up and say access denied.
any idea? I created the share as a domain admin and I am running the failover cluster admin as a domain admin

Hi JonDoe321,
From the error information It must the file share folder don’t meet the permission requirement, For the folder that the file share uses, make sure that the administrator has
Full Control share and NTFS permissions, grant the CNO on the file share with full control right, you can refer the following KB to realize the detail requirement.
Failover Cluster Step-by-Step Guide: Configuring the Quorum in a Failover Cluster
http://technet.microsoft.com/zh-cn/library/cc770620(v=ws.10).aspx#BKMK_requirements
More related third party article:
How to configure a Node and File Share Majority quorum
http://www.howtonetworking.com/server/cluster12.htm
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

An impersonation error occurred using the security context of the current user. -- Report server is on remote server and file share folder is on local server

I have deployed a report on the server (e.g. remoteserver\reports) from my local machine. I opened the report in browser in my local machine and created a new subscription with windows file share delivery option.
But its giving an error "Failure writing file \\localserver\subscriptions\Report1.xls : An impersonation error occurred using the security context of the current user." Here "subscriptions"
is the folder which I have created in my local machine.
I followed the instructions found in the link "http://msdn.microsoft.com/en-us/library/ms157386.aspx"
Please help to solve this issue.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

Using DB Adapter for MS SQL Server 2005 SP in OSB 11g.

Hi All,
I have a requirement to create a DB Adapter for MS SQL Server Stored Procedure in JDeveloper and export the Adapter file to OSB 11g. I have Created the Adapter and imported it into OSB 11g successfully. Created the Datasource and Connection pool also in console.
The problem is while trying to execute the created business Service, I am getting the error as below,
<Oct 26, 2012 12:20:25 PM IST> <Error> <JCATransport> <BEA-381967> <Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/Test/CheckAppID/WL_Driver/CheckAppId_WL_Driver [ CheckAppId_WL_Driver_ptt::CheckAppId_WL_Driver(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'CheckAppId_WL_Driver' failed due to: Unimplemented string conversion.
Conversion of JDBC type to String is not supported.
An attempt was made to convert a Java object to String using an unsupported JDBC type: .
; nested exception is:
BINDING.JCA-11804
Unimplemented string conversion.
My XSD is ,
<element name="InputParameters">
<complexType>
<sequence>
<element name="application_id" type="int" db:index="1" db:type="INT" minOccurs="0" nillable="true"/>
</sequence>
</complexType>
</element>
<element name="OutputParameters">
<complexType>
<sequence>
<element name="RowSet0" type="db:RowSet0_RowSet" db:type="RowSet0" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
<element name="RowSet1" type="db:RowSet1_RowSet" db:type="RowSet1" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
</sequence>
</complexType>
</element>
<complexType name="RowSet1_RowSet">
<sequence>
<element name="RowSet1_Row" minOccurs="0" maxOccurs="unbounded">
<complexType>
<sequence>
<element name="cde" type="int" db:type="INT" minOccurs="0" nillable="true"/>
<element name="msg" db:type="NVARCHAR" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="255"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
<complexType name="RowSet0_RowSet">
<sequence>
<element name="RowSet0_Row" minOccurs="0" maxOccurs="unbounded">
<complexType>
<sequence>
<element name="aaa" type="boolean" db:type="BIT" minOccurs="0" nillable="true"/>
<element name="bbb" db:type="NVARCHAR" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="10"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
I don't know why there is a datatype conversion error.
Help me in resolving this.
Regards,
Nataraj R.

Hi,
I believe NVARCHAR is an unsupported type...
The following document lists the supported data types for SQL Server stored procedures and functions... NVARCHAR is not in the list... :-(
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#CHDEBEEE
Hope this helps...
Cheers,
Vlad

Physical Path in File Adapter for Windows Server

Hi There,
I am trying to read a file from a directory on a windows server and write it to the same server in a different directory.
In the file adapter I gave the value for physical path as below:
"\\10.xx.34.xxx\Share\input".
However I am getting below message in the debug:
"Value specified for input Physical/Logical Directory is not a directory or is not readable."
Hence my question is what should be the value in the physical path for windows server.
Thanks in Advance
Krishna
Edited by: user452458 on Jul 19, 2010 11:30 AM

Thanks for your reply again.
Actually they are not on the same file system.
I have successfully used FTP Adapter to connect to a UNIX server.
However is it possible to use FTP Adapter for Windows Server. If so how should be the corresponding JNDI defined.
I am getting below error when I use FTP Adapter for Windows Server:
Unable to send file to server. [Caused by: A remote host refused an attempted connect operation.]
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: A remote host refused an attempted connect operation.]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Please Advise.
Thanks
Krishna

URM 11g adapter for File Share

Similar Messages

Maybe you are looking for