URM Disposition Approval Error - Audit log

Hi there,
We have a URM environment installed and configured.
When attempting to approve a disposition action on an item in a retention schedule, the following error message appears:
"Unable to update DispositionsHistory table. Failed to check in audit log. Please reference '/appl/ucm/ContentServer/data/recordsManagement/log/##########.htm' audit log. You must save default metadata for checked in audit entries."
What is it here that we need to adjust in order to complete the approval?

Hello
You have to give your audit trail default metadatas. Under Administration-Configure Records Management-Audit-CheckedIn_Audit Entries you can find the Link for "Default Metadata for Checked-in Audit Entries".
Regards

Similar Messages

SharePoint 2013 audit log unexpected error

In one of my SharePoint 2013 site collection, when i try to save a audit log, i get unexpected error. It worked fine before last week and no any special setting has been applied before the issue appeared. The issue doesn't appear in other site collection.
i have tried to reproduce the issue with farm admin account and site collection admin, no success for all these accounts. However, i can see access denied error in the ULS log although i think the permission is not the problem. You may check the ULS log below.
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xC33B005
2jtj Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Unified Logging Service c91s
Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtk High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtq High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jx8 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s03 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s02 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jw0 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 06/19/2014 10:48:07.68, Original Level: Verbose] SQL connection time: 0.064296296654057
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General 8nca
Medium Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32
errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Runtime tkau
Unexpected System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在
System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General ajlz0
High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)
在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)
在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44

i have added the account to the local admin group of SQL Server and SharePoint Server. the issue remains. it is the system admin of the SQL server.
Logging Correlation Data
Medium
Name=Request (POST:https://xxx/_layouts/15/CustomizeReport.aspx?ReportId=df9e0f20-f356-4115-9286-ac6eecbc03ce&Category=Auditing)
Authentication Authorization
Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|tlw\farmadmin, ClaimsCount=28
Logging Correlation Data
Medium
Site=/
Information Rights Management
Medium
Information Rights Management (IRM): Requesting user is System account.
Files
High
UserAgent not available, file operations may not be optimized.    在 Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean
disposeIlb)     在 Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult)     在 Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     在 Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId)     在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes)     在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound)     在 Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate)     在 System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
在 System.Web.UI.Page.ApplyMasterPage()     在 System.Web.UI.Page.PerformPreInit()     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest()     在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     在 System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error)     在 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     在 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus)     在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
Files
Medium
Spent 0 ms to bind 29783 byte file stream
Monitoring
High
Leaving Monitored Scope (GetFileAndMetaInfo). 执行时间=17.6751425083646
Monitoring
High
Leaving Monitored Scope (GetWebPartPageContent). 执行时间=17.8435806939653
OpenXml
Medium
OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\FarmAdmin\AppData\Local\Temp\tmpBFE2.tmp, fcm=3)
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:33.08, Original Level: Verbose] SQL connection time: 0.0727483919888626
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:35.00, Original Level: Verbose] SQL connection time: 0.07969118458531
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
0xC33B005
Assert
ShipAssert location: (0) condition:   StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xC33B005
Assert
ShipAssert location: (0) condition:   StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:36.86, Original Level: Verbose] SQL connection time: 0.0706353681551612
General
Medium
Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))   在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean
disposing)     在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Runtime
Unexpected
System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))    在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
General
High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED))     在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset,
Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)     在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()
在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable
query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.HandleError(Exception e)     在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest()
在 System.Web.UI.Page.ProcessRequest(HttpContext context)     在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     在 System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously)

Audit Log Report not display and error is "Report Contents No data"

Dear All,
i have reuired the audit log report but when i am click the Site Action->Site Setting->Audit log reports->Run a custom report-> select the day and option and click ok the i have received the error
Please help me please check below screen shot

Can you please confirm that you have configured events to audit?
Configure
audit settings for a site collection
Here is step by step how to configure audit setting.
http://anthony-verschraegen.blogspot.ca/2013/04/sharepoint-2013-configuring-audit.html
Amit

SOAP error in audit log of message monitor

Hi,
I am using RPC wsdl file for idoc-xi-soap services. When I am doing the testing for the scenario in the message monitor I am getting the following audit log:
2008-02-29 15:21:48 Success Message successfully received by messaging system. Profile: XI URL: http://EMHBSSAP05.bekaertcorp.local:56600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-02-29 15:21:48 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-02-29 15:21:48 Success The message status set to DLNG.
2008-02-29 15:21:48 Success Delivering to channel: ZCC_Material_SOAP
2008-02-29 15:21:48 Success MP: Entering module processor
2008-02-29 15:21:48 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-02-29 15:21:48 Success Message successfully put into the queue.
2008-02-29 15:21:48 Success The message was successfully retrieved from the receive queue.
2008-02-29 15:21:48 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-02-29 15:21:48 Success SOAP: completed the processing
2008-02-29 15:21:48 Success SOAP: continuing to response message a9ea9a30-e6d1-11dc-c8bd-001a4b0658c1
2008-02-29 15:21:48 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success SOAP: sending a delivery error ack ...
2008-02-29 15:21:48 Success SOAP: sent a delivery error ack
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: SystemErrorAck
2008-02-29 15:21:48 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: AckNotSupported
2008-02-29 15:21:48 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:.
2008-02-29 15:21:48 Success The message status set to WAIT.
Can anybody suggest what is the meaning and root cause for the error:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Thanks & Regards
Prabhat

go to sxi_monitor and get the inbound message, later go to IR an do a TEST mapping.
any error occur?if yes, paste it here
generally soap fault o soap exception relate to an error from WS side,but before say nothing check you have all data and transformation OK.
hope it helps

500 Internal Server Error - Channel Monitoring Audit Log

Hi Experts,
We are facing an error in the 'Audit Log' of the communication channel monitoring of a File Sender Adapter.
The channel uses a custom written Java Module which uses XSLT parser internally. The audit log displays the following error:
500 Internal Server Error
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: "The WebApplicationException log ID is [4698F300D2C40C2000000000000009AA]."
This error occurs both when the file is processed successfully or when in error. In case of a positive test case file, we can even see the message reaching Pipeline (SXMB_MONI). But only the audit log does not show the processed steps in the channel monitoring and displays the above error message.
We have even established that the cause of the error is Java Module (First, we executed by removing our custom Java Module from the module steps and the audit log showed the steps correctly. But by putting the module back in the channel, the error resumed).
Initially, the error was not coming and we were able to test this properly. But over the time the audit log error started. Now, we are not able to get rid of this even by restarting the channel or restarting the Java stack of the server.
To me, it seems like a memory issue in the Java Stack.
Any thoughts?
Can we find out where to find the details of the WebApplicationException log ID displayed above?
Thanks,
Sudheer

Hello,
This could be generic but may helo you:
500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Regards,
Caio Cagnani

An error occurred while trying to access the audit log

Hi I have run Set-Mailbox ian.shapton -AuditOwner Update, Move, MoveToDeletedItems, SoftDelete, HardDelete
I then created and deleted an email and ran Search-MailboxAuditLog -Identity "ian shapton" -LogonTypes Owner -StartDate "12/21/2014 12:00" -EndDate "12/21/2014 13:00" -ShowDetails
I see An error occurred while trying to access the audit log. For more details, see the inner exception.
+ CategoryInfo : NotSpecified: (:) [Search-MailboxAuditLog], AuditLogException
+ FullyQualifiedErrorId : [Server=Mailbox01,RequestId=07f17915-f25d-4fd5-b23e-f07a2482f4a4,TimeStamp=21/12/2014 16:45:39] [FailureCategory=Cmdlet-AuditLogException] 255D6156,Microsoft.Exchange.Management.SystemConfigurationTasks.SearchMailboxAuditLog
MSExchange CmdletLogs shows Microsoft.Exchange.Data.ApplicationLogic.AuditLogServiceException: The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired','The search operation could
not be completed within the allotted time limit. Please try to narrow down your scope to reduce the result set.'.
I am a Recipient Admin and Org Admin and can search other mailboxes using -LogonTypes Delegate
Any idea what I am missing here?
shapi

Hi,
I have the same problem when I run the Search-MailboxAuditLog command. It has been working for 2 weeks but suddenly after moving databases from one datacenter to another and back again it stopped working. The account running the command
is in all necessary roles needed.
This is what I have tested after it stopped working:
- Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) = Works
- Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) -showdetails = does not work and comes with an error.
"The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired',
'The search operation could not be completed within the allotted time limit.
Please try to narrow down your scope to reduce the result set.'."
This is very bad for us because we use a lot of shared mailboxes with delegates and want to report delegate action on these mailboxes.
Environment:
- 3 datacenters
- Exchange 2013 CU7
Thorir
thorir

Error in audit log

Hi Experts,
A message has failed in adapter engine and the audit log shows some error in main,row 2,col 17.
My quesiton is,Is it in the soap header-> main or in Payload-> main document?
and how to find row 2.Is it 2nd line of the xml or something else?
Similarly, how to find the col(column)where the error present?
Please help me with the answer !!

Do one thing, its a work around.
downaload the payload XML file then open the XML payload file using XML -spy software and look for the row row 2,col 17.
In XML-SPy at the bottom right corner u can easily find out the row col details based on that u will check where is the problem.
chirag

Audit Log Report generating an "Out of Memory" error message.

Greetings. We are a new IDM customer. We are running IDM 6.0 with an Oracle database. We are now getting the following error message when we run the IDM Audit Log Report for Today's Activities:
"java.lang.OutOfMemoryError".
How do we increase the memory setting for reporting? Thanks.

Hi,
I am also getting the same error. I have netbeans with tomcat andi modified the setting the netbeans.conf to
netbeans_default_options="-J-Xms32m -J-Xmx750m -J-XX:PermSize=32m -J-XX:MaxPermSize=750m -J-Xverify:none -J-Dapple.laf.useScreenMenuBar=true"
i have 896MB of RAM. However, the error is still showing up? Any ideas on how to resolve this?
Thanks,

'Content viewing' in 'Audit Log reports' throws timout error

I have enabled 'Reports' in the site collection features and I am tryin gto generate the 'Content viewing' in 'Audit Log reports'. This keeps me waiting for a couple of minutes and throws a timeout error. Could you please let me know why is this happening
and is there any way to resolve it ?
I am getting the below error in UI and in my logging database
System.Exception
Reason: Request timed out. URL:
https://Mydomain/Mysitecollection/_layouts/RunReport.aspx/Content_viewing.xml
Thank you
Regards Rahul A

Hi,
According to your issue, firstly, please check if your hardware performance is poor or the site collection has numerous data, if so, improve the hardware or pull the
data out of the tables, then check the effect.
Secondly, if you cannot view audit reports for the site http://servername /sites/sitename
Try to detach and attach content database for the site you want to view, then check the effect.
Thanks,
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

Runtime error for Audit Log reports

Hi,
I have activated Reports feature at Site Collection level and then tried to run custom report for Dashboard library under Audit Log Reports but I got Run Time error. I tried on my local machine and on server.
Can any body let me know how to resolve this issue to get custom report?
Any help would be appreciated.
BELOW IS THE ERROR MESSAHE:
Server Error in '/' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed
by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
AEDLA.

The audit log reporting is kind of tricky to work with...until you know what you're doing.
Some things to check: Do you have the Reporting feature enabled? Do you have auditing enabled on sites in this site collection? Have any events been triggered that would have written to the audit logs? Did you specify an output library
for the report? Will the report have any data?
Also, look at the SharePoint logs in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\ and let us know any "Unexpected" errors.
Bob Guidinger
Please remember to click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

Same Application Error - while checking the auditing log report in site settings

dear all,
I am getting application error - when I am checking the audit log report from
Site Settings ->Audit log->Run a custom report ->In the save location - when I click browse button.
Any inputs to solve the issue will be helpful?
Cheers
Sathya

Hi,
Try to configure audit settings for a site collection as the link below:
https://support.office.com/en-us/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Or check the blogs below:
http://sharepointthomas.blogspot.com/2011/07/how-to-enable-audit-functionality-in.html
http://www.codeproject.com/Articles/431342/Auditing-A-Built-in-Feature-of-SharePoint
Did you check the ULS log?
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Audit Log Not Being Created

Hi,
I'm using the workflow application "Audit" as an activity in my custom workflow and I'm passing the required arguments.
In the workflow trace file, I can see that the Audit application is run using the passed parameters but no record is being created matching that information in the "log" table.
Any ideas/suggestions?
Thanks
Here is the trace for your information:
Resolved reference requesterWSUser = object
Assigning requesterFullName = Test1 Manager1
Action Set Audit Resources List
Result title set to 'Set Audit Resources List'
Evaluating XPRESS
Resolved reference approved = false
Resolved reference auditApps = [AD_Simulated]
Resolved reference auditApps = [AD_Simulated]
Assigning depApps = [AD_Simulated]
Action Audit
Result title set to 'Audit'
Iterating over depApps = [AD_Simulated]
Iteration 0
app = AD_Simulated
Argument op = audit
Argument type = User
Argument status = success
Argument action = View
Argument reason = User Access Recertification
Argument subject = TestManager1
Resolved reference user.waveset.organization = null
Resolved reference app = AD_Simulated
Resolved reference app = AD_Simulated
Argument resource = AD_Simulated
Resolved reference enduserId = testuser4
Argument accountId = testuser4
Resolved reference enduserView.accounts[Lighthouse].firstname = Test4
Resolved reference enduserView.accounts[Lighthouse].lastname = User4
Resolved reference enduserId = testuser4
Resolved reference requesterFullName = Test1 Manager1
Argument error = The access of the user Test4 User4(testuser4) has been recertified by Test1 Manager1
Calling application 'com.waveset.session.WorkflowServices'
Application requested argument op
Application requested argument logResultErrors
Application requested argument action
Application requested argument status
Application requested argument type
Application requested argument subject
Application requested argument name
Application requested argument resource
Application requested argument accountId
Application requested argument error
Application requested argument parameters
Application requested argument attributes
Application requested argument originalAttributes
Application requested argument overflowAttributes
Application requested argument auditableAttributesList
Application requested argument organizations
Step complete 'Audit'
Step inactive 'Display Message'
-------------------------------------------------------------------------

I agree with the anokun7. Check to make sure the action your are giving it is a valid one. ( See IDM Workflow Forms and Views pdf and search for Action Names, it will give you a list of all the valid actions) Also you can add your own attributes to the Audit object as well using the attributes variable. ( It expects a map: <map>
<s>Key</s>
<ref>value</ref>
<map>
Value can be a reference, or string, or however complex you want to make it. Just be aware of what view (if any) is available at the time you call the audit. Hope this helps
Message was edited by:
dmac28
Oh yeah..The attributes will appear on the audit log reports, Based on what action and type you audited it will show up on that record. i.e Delete action, on Type User...that audit record will have a changes value which will have whatever attributes you passed to the audit object.

CUP Request Stuck in Approver's Queue (approval show in logs)

We are seeing an odd error in our CUP system (5.3 SP13). A request will come to a user, they will approve it, and then the request will never actually leave their queue.
I can look at the request's Audit Information and see they have approved. It has clearly been registered in the logs. However, the request just will not move on to the next state. If I go to the Administration section, and click on Forward Request, it shows that particular approver's approval as still being outstanding.
It appears to CUP as if the approver has taken no action whatsoever, but the audit log says they clearly have. I eventually have to wait for all other approvals to be collected, and then approve the ticket as an Admin to finally provision the request. It will just sit in their queue forever if I do not. I have yet to establish any kind of pattern or common denominator between the requests, but I have at least 7 examples of it happening so far. We have not made any changes to the workflows. The last major change was the upgrade from SP7 to SP13 last month (this started happening shortly after that).

It may very well have to do with the upgrade to the SP13 , I would open a message with SAP support to check if this is a known issue. There is a thread somehwere here which discussed all the bugs of SP13, If you search for SP13 on thr forum you might find it.
Regards,
Chinmaya

Write to audit log from Axis Handler

Hi guys,
Using PI 7.11 SP 04 I have deployed the com.sap.aii.af.axisproviderlib.sda containing the libraries for Axis.
This is deployed fine and I can write my Handlers without trouble.
There is only 1 issue bugging me and that is the writing to the Adapter Audit Log. In SAP Note 1039369 FAQ XI Axis Adapter it is described how to write to the Audit log.
I can successfully write to the Channel monitor. But when I try to write to the Audit log data is still just written to the Channel monitor and not the audit log.
So what I have done is:
StatusAgent sa = (StatusAgent) getOption(Constants.MONITOR_AGENT_KEY);
Hashtable ht = getOptions();
ht.put("audit", Boolean.TRUE);
ht.put("pivoted", Boolean.TRUE);
sa.reportEvent(Status.OK, "This should be written to audit log but is written to channel monitor", ht);
sa.reportEvent(Status.ERROR, "This should also be written to audit log but is written to channel monitor", ht);
If i print the content of my hashtable in the channel monitor I can see that my entries are put into the table just fine. The 'audit' entry just seems to be completely ignored.
Anyone have and suggestions?
Regards,
Daniel

Hi Guys,
I need to know what JAR file i need to download for the following packages from SAP PI.
import com.sap.aii.axis.monitor.Status;
import com.sap.aii.axis.monitor.StatusAgent;
import com.sap.aii.axis.utils.Constants;
I am doing AXIS custom modules and i need to write to the PI 7.1 Audit Logs.
Thanks in advance.
Raj

"logon time" between USR41 and security audit log

Dear colleagues,
I got a following question from customer for security audit reason.
> 'Logon date' and 'Logon time' values stored in table USR41 are exactly same as
> logon history of Security Audit Log(Tr-cd:SM20)?
Table:USR41 saves 'logon date' and 'logon time' when user logs on to SAP System from SAP GUI.
And the Security Audit Log(Tr-cd:SM20) can save user's logon history;
at the time when user logged on, the security audit log is recorded .
I tried to check SAP GUI logon program:SAPMSYST several ways, however,
I could not check it because the program is protected even for read access.
I want to know about specification of "logon time" between USR41 and security audit log,
or about how to look into the program:SAPMSYST and debug it.
Thank you.
Best Regards.

Hi,
If you configure Security Audit you can achieve your goals...
1-Audit the employees how access the screens, tables, data...etc
Answer : Option 1 & 3
2-Audit all changes by all users to the data
Answer : Option 1 & 3
3-Keep the data up to one month
Answer: No such settings, but you can define maximum log size.
4-Log retention period can be defined.
Answer: No !.. but you can define maximum log size.
SM19/SM20 Options:
1-Dialog logon
You can check how many users logged in and at what time
2-RFC login/call
Same as above you can check RFC logins
3-Transaction/report start
You can see which report or transaction are executed and at what time
(It will help you to analyise unauthorized data change. Transactions/report can give you an idea, what data has been changed. So you can see who changed the data)
4-User master change
(You can see user master changes log with this option)
5-System/Other events
(System error can be logged using this option)
Hope, it clear the things...
Regards.
Rajesh Narkhede

URM Disposition Approval Error - Audit log

Similar Messages

Maybe you are looking for