URPF (ip verify unicast reachable) command not found on Cat3550

Hello,
I can't find "ip verify unicast ~~" command on cat3550 with 12.1(22)EA1a.
Os code name is c3550-i5q3l2-mz.121-22.EA1a.
but i found that command on Cat3550 with 12.1(11)EA1, it's code name is c3550-i5q3l2-mz.121-11.EA1.
Cisco do not support higher version?
Regard,
John.

Hi John,
uRPF has never been supported on the 3550. The hardware cannot perform the function. The command was included in the CLI in older versions, but was eventually removed to prevent confusion.
HTH,
Bobby
*Please rate helpful posts.

Similar Messages

Executing CR HOST script, encountering command not found

Hi All,
I new to writing Host scripts, especially for use within the Applications.
I need to go out to an FTP site and grab a file.
The FTP portion of the script works fine.
The problem I'm encountering is with the execution of regular commands like 'cd' or 'mv'.
The error comes back, ...line xx: cd: command not found
When I have an actual directory path with the cd command - I always get, No such file or directory...
(I have verified the directory paths I'm attempting to change to exist and available.)
The FTP portion executes, but the received file goes into some obscure server directory. Can't even perform a move of the file.
The echo command works fine.
I have created just a dummy script to do a cd /u32/... command and still the same Error.
Any suggestions will be very helpful.
Thanks,
Bradley

Here is a main code script....
#$HEADER: XX_BANK_STMTS_IMPORT
# PROGRAM NAME: XX_BANK_STMTS_IMPORT
# PURPOSE:
# Load XXXX Bank Statements
# XX Bank Statements Import Concurrent Program
# This script requires to run as Concurrent Request
P_LOGIN="$1"
P_USER_ID="$3"
P_REQUEST_ID="$4"
REMOTE_USER=ftpuser
REMOTE_PASSWD=ftpuser
FTP_DIR=u32/oracle/DBCTEST/apps/apps_st/xxcust/12.0.0/ftp/inbound
REMOTE_PATH=public/dbco_cng/reporting
REMOTE_FILE=*.PGP
echo "USER = "${USER}
echo "HOST = "${HOSTNAME}
echo "Directory = "${PWD}
cd /u32/oracle/XXXTEST/apps/apps_st/appl/xxcust/12.0.0/ftp/inbound
echo "Directory = "${PWD}
echo " Transferring File"
ftp -n -i -v <<-EOF
open XX.XX.XXX.XXX
user $REMOTE_USER $REMOTE_PASSWD
##lcd $FTP_DIR
cd $REMOTE_PATH
mget $REMOTE_FILE
EOF
I get errors like
/u32/oracle/XXXTEST/apps/apps_st/appl/xxcust/12.0.0/bin/XX_BANKFILE_LOAD.prog: line 108: cd: /u32/oracle/XXXTEST/apps/apps_st/appl/xxcust/12.0.0/ftp/inbound
: No such file or directory
or if I just put the cd command:
cd: commad not found
The commented out lcd was from previous tries at doing it that way... No luck.
Thanks.

SPident command not found SLES 11

I have a SLES 11 server running ZLM 7.3 and with SLES10sp1 & 2 I could run SPident -vv to verify my system was up-to-date. When I type SPident -vv in SLES 11 I get the following:
# SPident -vv
If 'SPident' is not a typo you can run the following command to lookup the package that contains the binary:
command-not-found SPident
-bash: SPident: command not found
I tried Googling around to see if this command was replaced but came up empty handed. Is there a new command to use? I tried to see if I could add it from Yast but nothing should up there either. Is there a new way to see if you system is up-to-date?

I saw in the changelog for sles 11 that SPident was replaced by the command "sam".
That is part of the suse-sam package if you not already have installed it.
Try that.
Rainer

Internal drives locked - "chflags: command not found"

My Intel MacPro has always had occasional issues with ownership and permissions ever since migrating my home folder from a PowerPC. As this is no longer my primary machine, I unwisely decided to do some tidying up. I have drives in 3 bays and they are all partitioned. In moving some data from one partition to another I encountered "you do not have permission.." so called up the Get Info window, noticed the privileges were set to 'custom' and decided to set this straight. And for the other partitions.
So now every partition has a lock icon except the partition with the OS 10.5.8 on it
Get Info won't allow me to remove the lock or change the privileges
As of today, I now cannot boot from the 10.5.8 partition (no idea why this developed), so have booted from the OSX Install DVD
Running Disk Utility I can verify the 10.5.8 partition ok (all other partitions still are locked) but Verify Disk Permissions returns "Error: The underlying task reported failure on exit"
So I read a load of threads here and opened Terminal from the Install DVD and typed
chflags 0 /volumes/*
very carefully
but it says
chflags: command not found
There is insufficient space on the unlocked partition to run an Archive & Install of the OS, and it won't let me install onto any other partition beause they're locked. I was considering booting it in Target Disk Mode - perhaps BatChmod works?

BatChmod might work, but careful on the boot disk.
Open Terminal & paste this in, spaces are important...
chown root /Volumes/
chmod 1777 /Volumes/
then right after the last / of each line, carefully type the name of that external volume, & if it has spaces in it enclose the name in quote marks.
See this User Tip by Niel: I accidentally set a disk's permissions to No Access ...
If the disk in question is your Mac OS X startup disk and your computer stops starting up at the blue screen, restart with the Command and S keys held down, and enter the following commands:
mount -uw /
chown root /
chmod 1775 /
exit
https://discussions.apple.com/docs/DOC-2240
I think your original permissions problems were likely from already having an account setup on the new Mac before using MA, in that case the old 1st user on the PPC, (501), gets migrated to 502 on the new mac, & so on.

Sudo: user: command not found

Hi there,
I'm struggling with this sudo problem.
All i've been doing with terminal was logging into another account on my iMac and running an application, so i write sudo disk (disk is username for the other account)
then i enter password and path to the application
i've been doing this for past 3-4 month every day, bet since yesterday after entering pasword i get this error - sudo: user: command not found
Any help here would be appreciated!
Thank you

which sudo returns: /usr/bin/sudo
i used First Aid to verify disk permissions 3 times.. repaired them, but it keeps giving me the same errors every time i hit Verify Disk Permissions..
List of errors:
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions verification complete
Are these pretty bad errors? Are these causing sudo not to work?

Command not found error while executing a shell script

Hello,
I am a newbie to linux.I am attaching the code which gives me following errors..
error list:
1. no such file or directory enviornemnt
2. command not found
3. ambiguous redirectline
Script
cd $HOME/wkdir
rm /tmp/*.log
# source environment
. ./env
# Run the install script to setup the database
# Configure SH account
sqlplus "/ as sysdba" <<! > /tmp/perflab_install.log 2>&1
grant connect, resource, dba to SH;
alter user sh account unlock;
# create the fetch_n_rows procedure
sqlplus "$PERFLAB_USER" <<! >> /tmp/perflab_install.log 2>&1
drop index sales_time_bix;
drop index sales_time_idx;
create index sales_time_idx on sales(time_id) compute statistics;
-- fetch_n_rows: fetches 'n' rows from the specified statement --
CREATE OR REPLACE PROCEDURE fetch_n_rows(
stmt VARCHAR,
name VARCHAR,
nexec NUMBER := 1,
nrows NUMBER := 0,
debug BOOLEAN := FALSE)
IS
-- Local variables
curs INTEGER := null;
rc INTEGER;
nexec_it INTEGER := 0;
nrows_it INTEGER;
BEGIN
dbms_application_info.set_module('DEMO', name);
WHILE (nexec_it < nexec)
LOOP
curs := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(curs, stmt, DBMS_SQL.NATIVE);
rc := DBMS_SQL.EXECUTE(curs);
nrows_it := 0;
LOOP
IF (dbms_sql.fetch_rows(curs) <= 0 OR (nrows <> 0 AND nrows_it = nrows
THEN
EXIT;
ELSE IF (debug = TRUE)
THEN
DBMS_OUTPUT.PUT_LINE(nrows_it);
END IF;
END IF;
nrows_it := nrows_it + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR(curs);
nexec_it := nexec_it + 1;
END LOOP;
dbms_application_info.set_module(null, null);
END fetch_n_rows;
show errors
# Start the workload
. ./start_workload.sh > /tmp/setup_perflab.log 2>&1
# Wait two minutes for workload to get going
sleep 120
# Modify snapshot interval
sqlplus -s /NOLOG <<EOF >> /tmp/setup_perflab.log 2>&1
connect / as sysdba
set head on
set feedback on;
set pagesize 40
rem -- event to allow setting very short Flushing interval
alter session set events '13508 trace name context forever, level 1';
rem -- change INTERVAL setting to 2 minutes
rem -- change RETENTION setting to 6 hours (total of 180 snapshots)
execute dbms_workload_repository.modify_snapshot_settings(interval => 2,-
retention => 360);
EOF
Note : start_workload.sh is also in the same directory..
Any help would be greatly appreciated.

Please put your script between "code" format delimiters.
http://wiki.oracle.com/page/Oracle+Discussion+Forums+FAQ
You can add the line "set -x" at the beginning of your script to see at which line it fails? I suspect the . ./env line.

Shell Commands not found error when running application

Hello,
Im using MonoDevelop IDE in my Mac, before it used to work fine but after few days, now when I'm opening the application nothing happens., i checked the Console for the log and it says this
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 17: dirname: command not found
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 31: //mono-version-check: No such file or directory
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x52052].com.ximian.monodevelop[1510]): Exited with code: 1
I thought may be some error with the "dirname" command, so i commented it in the code and gave the path of directory myself and then the console shows up like this.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: grep: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 20: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 21: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 22: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 31: osascript: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: Cannot launch MonoDevelop
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: MonoDevelop requires the Mono Framework version 2.10.4 or later.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x56056].com.ximian.monodevelop[1532]): Exited with code: 1
I opened the contents of the application and run the shell script for opening aplication there it worked very fine and application started working.. But if i open application directly through launchpad or finder it doesnt show up and console
I tried running those commands in the terminal directly there they work.. But dunno whats wrong in here. and even if try to open the application through the terminal it all opens fine.. what could be the possible problem, is it with my mac..?

i finally figured out the problem.. it is with the environmental variables. the path for all those commands like "grep" is not being set for the GUI applications. that is why i got that error.
for those GUI applications which require path, we have to set path in the file /etc/launchd.conf the environmental variables set in here are used by the gui applications and those which are launched through spotlight.
that file may bot be present in most of the macs. No problem even if not present,we can create one and use.
so type in terminal
$ sudo vi /etc/launchd.conf
and in the editor add these lines
setenv PATH = /new/path
and save. Note: replace /new/path with the path which you need to have for the commands used in the script.
remeber that you need to restart your mac for applications to use these environmental variables.

I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

Command not found error in Linux

Hi all,
While login into Linux server using terminal i am getting following error.
-bash: /usr/bin/id: No such file or directory
-bash: [: =: unary operator expected
While execute these commands getting following errors
# clear
-bash: clear: command not found
# du -sh *
-bash: du: command not found
Help on these issues.
Linux 32bit OS.
Red Hat Enterprise Linux Server release 4.0 (Tikanga)

Likely a flaky environment.
What is the contents of .bash_profile in your $HOME?
Any btw, why RHEL4? It is ancient.

Command not found error while executing shell programs in terminal

I have written one sample shell program.
while executing shell program in terminal,it shows COMMAND NOT FOUND error.
How to slove this.

Post the "Actual" error. It says more than command not found.
Post your script.
Post the output from:
echo $PATH
Post the output from:
which name_of_command_not_found

Command not found on running binary files.

I have a very strange problem with my new arch installation, which I never faced on other linux installations/distros.
I'm trying to execute binary files from android-sdk, which I have them from other distros and always worked, and I get always "command not found" message. For e.g I tried to run adb(5 different files from different places), from terminal and from the folder in which is each and all times I get "command not found" message.
Some other work though, as eclipse binary. All files I've tried worked fine, and also work fine if I run them from Ubuntu installation.
I had this problem and for some newly isntalled packages too, as packagkit, and rutorrent. Packagekit worked after a reboot, but rutorrent gives same message.
Any help?

user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ QtADB
bash: QtADB: command not found
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ ./QtADBbash: ./QtADB: No such file or directory
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh ./QtADB
./QtADB: ./QtADB: cannot execute binary file
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh QtADB
QtADB: QtADB: cannot execute binary file
user-arch@archusrxpc /home/@solushome/user-solus/QtADB-cwm_edition $ ls -l
σύνολο 2940
-rw-rw-r-- 1 user-arch 1000 5259 Απρ 13 2012 Changes.txt
-rw-rw-r-- 1 user-arch 1000 25330 Ιούν 26 2012 debug.log
-rwxrwxr-x 1 user-arch 1000 2970612 Απρ 13 2012 QtADB
drwxr-xr-x 1 user-arch 1000 0 Ιούν 26 2012 tmp
drwxrwxr-x 1 user-arch 1000 366 Μάρ 13 2012 tools
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $
Last edited by dancer69 (2013-01-17 18:30:23)

Oracle apps 12i pre install checks fails in cl; command not found

Hi guyz,
Im trying to install 12i on external hard drive (windows xp), I followed the steps from http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=60&start=0
The installation fails in
command: cmd.exe /c D:\stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd d:\Tools\MKS\mksnt\bin d:\Tools\MSVC\V98
D:\stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/cygdrive/d/Tools/MKS/mksnt/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
There are no spaces in MKS tool kit and Visualstudio2005 install dir but still the installation fails.
I tried many combinations installing MKS and VS on c:, installing MKS and VS on d:, installing VC++ express edition but nothing worked. Also i have set the enviromental variable PATH each time i made a change. Still i get the same issue.
Im doing this for a week now, had no luck.
I had a successful installation of 11.5.10 from e delivery but it didn't had the financials modules needed. There is an update for 11.5.10 on edelivery but i was not sure if they had the financials modules in it, so i decided to go for 12i
Can anybody help me with 12i installation or provide me steps how to apply the updates on 11.5.10 if updates have financials in it.
I appreciate any help.

Oracle E-Business Suite R12 Installation on Windows 2003
Re: Oracle E-Business Suite R12 Installation on Windows 2003
If you have a VC98, you are using Visual Studio 6. You need to be using Visual Studio 8, and set the Visual Studio directory in Rapidwiz to d:\Tools\MSVS\VC.
The Vision installation of Oracle Applications has had Oracle Financials implemented for the fictitious company Vision Corporation from the beginning, 10.7 I believe, but definitely every 11i release has financials plus every other product licensed. Not all the newest products are fully implemented, but they are licensed.

ORACLE_HOME disappeared, SQLPLUS - bash: sqlplus: command not found

OK, I am a newbie but am having real difficulty with my 10G DB which I had set up on Unix Solaris box but someone was messing around with it and now I can't see ORACLE_HOME, ORACLE_BASE and ORACLE_SID, they all return blank when I try to "echo" each.
I realise I should have originally set it in Bash_profile, but is now too late.
So how do I set them back up, I cannot get SQLPLUS / AS SYSDBA.........bash: sqlplus: command not found
I have tried to reset and export but still doesn't work.
I got the ORACLE_BASE as:
training:/export/home/training/product/10.2.0/Db_1:N
but can't seem to set the three variables to run SQLPLUS, any ideas what I am doing wrong?
Tried messing around to reset but nothing works, this is the present state of affairs:
env
SSH_TTY=/dev/pts/3
USER=training
ORACLE_SID=training
ORACLE_BASE=/oracle/app
PATH=/usr/sbin:/usr/bin
PWD=/export/home/training/product/10.2.0/Db_1/bin
TZ=Eire
PS1=\e[33m\h\e[31m-\u-\e[33m\W/\e[31m-$\e[32m
SHLVL=3
HOME=/export/home/training
LOGNAME=training
ORACLE_HOME=/oracle/app/product/10.2.0
Can someone help me, really need a step by step guide to set these back up properly.
Thanks

just retyped the last one correctly:
find / -name sqlplus -ls
find: cannot read dir /var/lib/gdm: Permission denied
find: cannot read dir /var/lib/log/gdm: Permission denied
find: cannot read dir /var/mysql: Permission denied
find: cannot read dir /var/dt/sdtlogin: Permission denied
find: cannot read dir /var/core: Permission denied
find: cannot read dir /var/run/smc898: Permission denied
find: cannot read dir /var/spool/clientmqueue: Permission denied
find: cannot read dir /var/spool/mqueue: Permission denied
find: cannot read dir /var/fm/fmd/rsrc: Permission denied
find: cannot read dir /var/fm/fmd/ckpt: Permission denied
find: cannot read dir /var/fm/fmd/xprt: Permission denied
find: cannot read dir /var/postgres/8.2/data: Permission denied
find: cannot read dir /var/postgres/8.2/backups: Permission denied
find: cannot read dir /var/sma_snmp: Permission denied
find: cannot read dir /var/tmp/gconfd-root: Permission denied
find: cannot read dir /var/tmp/orbit-root: Permission denied
find: cannot read dir /var/krb5/rcache/root: Permission denied
find: cannot read dir /var/opt/SUNWjass/run/20091012152456: Permission denied
find: cannot read dir /.gconf: Permission denied
find: cannot read dir /opt/SUNWlwact/misc/: Permission denied
find: cannot read dir /opt/SUNWlwact/sdk/: Permission denied
find: cannot read dir /opt/SUNWlwact/xsl/: Permission denied
find: cannot read dir /opt/SUNWlwact/svc/: Permission denied
find: cannot read dir /opt/SUNWlwact/man/: Permission denied
find: cannot read dir /.sunw: Permission denied
199411 1 -rw-r--r-- 1 training other 0 Jan 14 23:12 /export/home/training/sqlplus
172460 2 drwxr-x--- 9 training other 9 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/sqlplus
188055 10 -rwxr-x--x 1 training other 8776 Oct 27 18:00 /export/home/training/product/10.2.0/Db_1/bin/sqlplus
184787 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/inventory/Templates/sqlplus
184842 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/oc4j/j2ee/oc4j_applications/applications/isqlplus/isqlplus/WEB-INF/classes/oracle/sqlplus
find: cannot read dir /root: Permission denied
find: cannot read dir /proc/227: Permission denied
find: cannot read dir /proc/832: Permission denied
find: cannot read dir /proc/835: Permission denied
find: cannot read dir /proc/458: Permission denied
find: cannot read dir /proc/381: Permission denied
find: cannot read dir /proc/624: Permission denied
find: cannot read dir /proc/818: Permission denied
find: cannot read dir /proc/2221: Permission denied
find: cannot read dir /proc/290: Permission denied
find: cannot read dir /proc/1166: Permission denied
find: cannot read dir /proc/273: Permission denied
find: cannot read dir /proc/229: Permission denied
find: cannot read dir /proc/225: Permission denied
find: cannot read dir /proc/478: Permission denied
find: cannot read dir /proc/445: Permission denied
find: cannot read dir /proc/815: Permission denied
find: cannot read dir /proc/410: Permission denied
find: cannot read dir /proc/432: Permission denied
find: cannot read dir /proc/440: Permission denied
find: cannot read dir /proc/427: Permission denied
find: cannot read dir /proc/352: Permission denied
find: cannot read dir /proc/443: Permission denied
find: cannot read dir /proc/1352: Permission denied
find: cannot read dir /proc/406: Permission denied
find: cannot read dir /proc/2353: Permission denied
find: cannot read dir /proc/670: Permission denied
find: cannot read dir /proc/667: Permission denied
find: cannot read dir /proc/405: Permission denied
find: cannot read dir /proc/213: Permission denied
find: cannot read dir /proc/16953: Permission denied
find: cannot read dir /proc/1146: Permission denied
find: cannot read dir /proc/2580: Permission denied
find: cannot read dir /proc/27831: Permission denied
find: cannot read dir /proc/444: Permission denied
find: cannot read dir /proc/1338: Permission denied
find: cannot read dir /proc/1350: Permission denied
find: cannot read dir /usr/lib/cc-cfw: Permission denied
find: cannot read dir /usr/aset: Permission denied
find: cannot read dir /.gconfd: Permission denied
find: cannot read dir /etc/flash/precreation: Permission denied
find: cannot read dir /etc/flash/preexit: Permission denied
find: cannot read dir /etc/flash/postcreation: Permission denied
find: cannot read dir /etc/inet/secret: Permission denied
find: cannot read dir /etc/apache/ssl.key: Permission denied
find: cannot read dir /etc/sfw/openssl/private: Permission denied
find: cannot read dir /etc/sfw/private: Permission denied
find: cannot read dir /etc/webmin: Permission denied
Looks a bit better:
199411 1 -rw-r--r-- 1 training other 0 Jan 14 23:12 /export/home/training/sqlplus
172460 2 drwxr-x--- 9 training other 9 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/sqlplus
188055 10 -rwxr-x--x 1 training other 8776 Oct 27 18:00 /export/home/training/product/10.2.0/Db_1/bin/sqlplus
184787 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/inventory/Templates/sqlplus
184842 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/oc4j/j2ee/oc4j_applications/applications/isqlplus
How to I run the sqlplus?

Sqlplus command not found

Hi All,
OS : Solaris
Oracle Version : 10.1.0.2.0
When i am trying to connect to database by typing sqlplus
i am getting error
-bash: sqlplus: command not found
previously when i connect like that i am able to connect to database
when i check space
I have 32 GB Drive and free space is 288M.
Can anyone tell me is this the space issue or any other issue.
I logged in with Oracle User

Vikas Kohli wrote:
Hi All,
OS : Solaris
Oracle Version : 10.1.0.2.0
When i am trying to connect to database by typing sqlplus
i am getting error
-bash: sqlplus: command not found
previously when i connect like that i am able to connect to database
when i check space
I have 32 GB Drive and free space is 288M.
Can anyone tell me is this the space issue or any other issue.
I logged in with Oracle UserSet the environment variable PATH correclty and make sure you've added $ORACLE_HOME/bin folder to it
export PATH=$ORACLE_HOME/bin:$PATH
sqlplus / as sysdbaKamran Agayev A.
Oracle ACE
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

Single user mode . using tail -f (command not found)

Have an empty computer with no systems disk as the installation CD start up will not go past the grey screen with the rotating logo before the panic crash page comes up and tells me to restart the computer.
Trying to boot into single user mode and then use the command tail -f to see contents of some of the logs... BUT I get the reply tail command not found ????

If the hard drive is empty, then you can only boot from the CD. Regardless of whether or not it has "tail," it won't do you any good. There are no logs.

URPF (ip verify unicast reachable) command not found on Cat3550

Similar Messages

Maybe you are looking for