US and EU Nokia E66 ???

Hello,
I called Nokia Support over this issue /discussions/board/message?board.id=communicators&message.id=31395&query.id=909973#M31395
After giving them serial number they told me there are two type of Nokia E66, one for US and one for EU market. I don't know how I ended up with US in Europe.
Who can tell me what is latest version of software for EU and for US and is there any difference between them?
damiri

The main difference between the hardware intended for US (North America) vs. Europe/Asia is the 3G (WCDMA/UMTS) frequencies supported by the phone.
However, since they are different devices, they'll have different firmware codelines. Most typically it seems that the US/North American firmware versions come behind the European/Asian corresponding models.
Overall (besides the different cellular frequencies), there're usually no other significant differences in the basic S60/Symbian software and default applications.
I don't know how you ended up with an US model in Europe, except if someone imported the US model, or a retailer accidentally ordered US models. If you got an US model, then the charger would also have an US wall plug, though.
And, of course, the supported language combinations vary between the models.
There might also be regional differences in supplied additional applications, sales box contents. And of course operator customization has some impact (if it is not an unlocked retail/open market unit).
When you "dial" *#0000# what RM-code is listed on your phone? The European model should be shown as "RM-343".

Similar Messages

  • Wlan Controller and NOKIA e66 problem

    Hi all I want to ask some questions: I'mexperiencing these serious problem: when i place a voip call with E66 the voice is seriously chopped.
    With 7921 the voice is ok.
    I'm using: WLC 4402 (vers 4.2.207.0) nokia Call Connector 1.60 on nokia e66, UCM 6.1. I used the same configuration of the WLAN of 7921 as QoS and other specification.
    The encryption is WPA (I tried with CCKM+tkip+LEAP as the 7921 work but i have also LEAP authentication problem but is not the most important thing now).
    I don't know what to do.
    Can somebody help me?
    Thanks for your support

    Hi,
    I upgraded to PR3 only my personal Phone and i made the tests with my e66.
    I disabled the 802.11b network.
    The problem is very evident when i place a call nokia<->7921.
    calls nokia<->other cisco phone (non wifi) is acceptable but not very good.
    If I make a call using nokia<->PSTN lines is ok (It is quite like other phone).
    If I disable CAC the situation is the same
    I don't know if it is a roaming problem or other problems.
    Thanks

  • Nokia E66 problem with calling

    HI! 
     It is less than two weeks from purchasing a brand new mobile phone - Nokia E66. Although it is a good device for a lot of things a modern men needs nowadays, it has some dificulties when it is ordered to call someone.
    It works fine for a day or two, but after some time calling a persone  from the adress book is impossible. Even if a number is displayed as an "unanswered call" and "yes" button is pressed everything from the screen dissapears. I am able to call someone only if I type a number manualy. Pressing the "yes" key works fine only if a number is typed manualy. Restarting the mobile phone also "repairs" the problem for a while.
    I have the neewest software installed on the phone. What to do next?

    i would consider reinstalling latest firmware and then using the code #2 from your home screen to finish the process. back up all your data and contacts if you don't have them on the sim card, remove the memory card when you do this and default code is 12345.
    1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list.
    2. *#7370# - Reformat your phone
    3. This you perform as a last resort. Nothing else is working.If the phone is dead proceed with reflash if not, turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    re-flash - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service.
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Nokia E66-new firmware 400.21.013

    Hi Nokia guys,
    i have Nokia E66, used with Nokia original software only /even theme/.The telephone is blocking out at least twice per day. It is very unserious to leave such a business handset with messy software.
    I was very happy surpised today when i saw that a new firmware is came out /400.21.013/, BUT my NSU isn't support WINDOWS 7.
    In this case, what i /and all Nokia customers/ shall do?
    PS- hope new release of firmware to fix most of bugs

    hi, i downloaded the new software version for my e66 and when i switch on the phone it says lock code. so i entered the default lock code 12345 and it dint unlock. i have never put a lock code before.
    please help

  • Nokia E66 three finger reset

    hey, i just bought a used nokia e66 from someone.
    my phone service provider is a different provider than this phone is programmed to work with.
    ive tried doing the 3 finger deep reset, and even the *# whatever numbers it was reset. and the phone isnt responding to them in any way.
    after the 3 finger reset, it just starts up normally and tells me my sim isnt recognized.
    im located in israel, is it possible that this reset is done differently here? any ideas? thnks
    Moderator's note: The title was amended as this post was moved from another thread.

    Provided that you kept * 3 green keys depressed whilst powering on until Nokia "Shaking hands" logo appears device will have been reset to factory settings, but this has no bearing upon whether device is SIM locked to another provider.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia E66 - Exchange sync

    my company email is under exchange platform..n for us to sync using PDA, we must install the certificate as well, otherwise ou PDA cant use the direct push..
    so in this case, can nokia E66 or any nokia phone use the same email? because i am not sure wether the cert can be install to E66 or not, since it is create for PDA (window mobile based)

    The cert will not be particular to the PDA's and generally sepaking should work with an E66.
    Ensure you have the latest version of MfE, you can download it here
    http://www.businesssoftware.nokia.com/mail_for_exchange_downloads.php
    John
    John32

  • Nokia E66 EAP-TLS error

    Hi, I am configuring a Nokia E66 (wich is v4 in Cisco Compatible Extensions, so it supports EAP-TLS) with WPA2 EAP-TLS against IAS in a Cisco Wireless Network and I always obtain the same error in the IAS event viewer.
    denied accesss
    Authentication-Type = EAP
    EAP-Type = Smart Card or other certificate
    Reason-Code = 16
    Reason = Authentication was not successful because an unknown user name or incorrect password was used.
    Has anybody tried E66 with EAP-TLS?
    Any experiences?

    Yes, this is my setup
    - hidden network
    - infraestructure
    - security: WPA/ WPA2
    - EAP
    - Plug -ins: EAP-TLS. I select the user certificate and the CA certificate. User name from the certificate, domain from the certificate
    - WPA2 only mode
    In the IAS log, the username is correct, but always appear this strange error. The certificates and infraestructure I use it works well in a notebook
    Thanks

  • Error code 12017,nokia e66 software updation fails

    The following errors occours when i want to update nokia e66 software
    i was updating my phone software,during updating something wrong done,due to this
    1- My mobile phone files mmssync and contact group ds plugin corrupted.
    2- When i update my phone software through nokia suit,  nokia suit try to install mmssync and contact group ds plugin but gives error msg files are corrupted.
    3- when nokia suit download phone software and begin to install it,then usb cable disconneced then after some time connected.
    please tell me what should i do.my phone model is nokia e66
    Answare me as soon as possible.

    I doubt that it will fix your firmware installation problem, but I did once have a problem where a "DS Plugin" became corrupt.  The fix is to manually delete the bad program(s) in Application Manager (possibly in Control Panel -> Application Manager -> Installed Apps).  This is perfectly safe.  Delete "Contact Group DS Plugin" and probably "MMSync", too, then reboot the phone and reconnect it to Nokia Suite.  The plugins should then install normally.  I hope that helps.

  • Cannot re-install Nokia E66

    When I use NSU to update a Nokia E66, it tells me that I already have the latest software and the I cannot re-install the same software.
    I have done this many times before on Nokia E71.
    Regards

    Not without some information -
    Mac model/year
    which OS is on it now?
    How are you trying to reinstall?
    Was it downloaded using recovery?

  • Downloading SKYPE for Nokia E66 I get "skype is not supported...."

    HiI have Nokia E66 which is supposed to support SKYPE according to SKYPE site...trying to download it I get the message that SKYPE is not supported on this devicecan you please assist?thanks

    My problem is too. I got the message: Your is not supported *#0000#500.21.00902-06-2010RM-343C Nokia E66-1 (06) This is not the newest phone software, but there is never freezing. I use now the 1.5.0.12 skype version, i downloaded from the the Opera Mini, from Opera Mobile Store in 2011 summer (?). The Opera feel my phone type. Dear Developers!Please put the video call into Symbian Skype (for E66).Not only the Android and the iPhone live in the world. There is a lot of people still use Symbian (E51, E65, E66, E71, E72 - which have wifi and 3G/HSDPA)Now we write 2012 february. My next phone will Nokia E52 (Symbian again). I don't want use / change to Android or iPhone.Please, the new services and new options put this symbian softvare too, not only to android and iphone. Thanks!viktoriofrom Hungary

  • Everything Missing in new Nokia E66 410.21.010

    Dear All + Nokia Team,
    I installed the firmware RM-343 v410.21.010 for Nokia E66 but there are everything missing like languages and certificates which use to install my backup software for the Nokia E66.. I want my old version of firmware RM-343 v110.07.126 for Nokia E66 which is include Urdu (Middle East Languages) urgent bases.
    It remain to thankful of you.
    Best regards,
    S

    I want my old version of firmware
    NOT POSSIBLE
       jje

  • Updating Nokia E66

    Heyy... I Have Nokia E66 v4.00 i want to update it to v4.11 , i Connected my device via USB cable abd opened Ovi Suite , i found an avilabe update , when i clicked on it shows ( checking ur device ) after that a message appear on it " Internal Error Code 4 , unable to update , try to restart ovi suite or ur computer "
    i did both bt no result...
    help me
    and after update , is there anything will be deleted ? language ? dictoinary language ? apps ? message ? ....etc

    jjegan wrote:
    2. after update the C drive will be wiped
    Replied above = yes back up your data contacts etc first .
        jje
    2. after update the C drive will be wiped = so make sure you have a backup of your contacts, messages, etc.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Nokia E66 problem with call Logs

    Hello,
    I got the E66 like last week.
    102.07.81
    12-07-08
    RM-343
    I'm having a probelm with the Call logs. usualy, i should be able to go to call logs (missed calls, received, etc...) select the desired number and hit on dial; however, the phone does not respond. i press and nothing happens...
    today it happened with the phone book... i searched for a user, and then pressed on dial but still nothing happens... i had to type the numbers....
    is it a bug or i'm missing something?
    BTW, i had to disable Rotate function as it is TOOOOOOOOO sensitive, a tiny move and it will switch the screen.

    19-Sep-2008 08:11 PM
    zahi_k wrote:
    Hello,
    I got the E66 like last week.
    102.07.81
    12-07-08
    RM-343
    I'm having a probelm with the Call logs. usualy, i should be able to go to call logs (missed calls, received, etc...) select the desired number and hit on dial; however, the phone does not respond. i press and nothing happens...
    today it happened with the phone book... i searched for a user, and then pressed on dial but still nothing happens... i had to type the numbers....
    is it a bug or i'm missing something?
    BTW, i had to disable Rotate function as it is TOOOOOOOOO sensitive, a tiny move and it will switch the screen.
    Hi Zahi and All.
    I bought nokia E66 on August 1, 2008.
    I got an issue very similar to the one reported by Zahi about call Logs: after some hour of use, I can't make any call neither starting from the call in the logs or from the phonebook: when I press the green button there's no way to make a phone call.
    The only way to use the phone again is to restart the phone.
    It sounds really like a bug...and i think that this is not an admissible bug for a phone that costs more than 400 Euros...
    Hope that Nokia could fix asap the problem.
    Regds.

  • It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

    It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
    I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

    What?
    You want to control iTunes on your computer using the Remote app on your iPad?
    And you want to connect the iPad and computer through your Nokia?
    No, this will not work.
    Just create a network with your notebook.

  • Nokia E66

    Guyz! I've just taken Nokia E66, I want to know if I can use this phone as a modem for my laptop to use the net. If yes then how to do it, I'm not much into computers so kindly explain in details. I'm from Oman using NAWRAS. Thanks for the help.

    Click here then click on the download button. Once the download is done. install the file to your computer. When installation is over I think it will as you to restart after wards connect the phone using a cable, Run PC suite from the computer(which you have just installed) click on OTA in PC suite. Surf the web 
    Show your appreciation. Hit that kudos button real hard

Maybe you are looking for

  • How to read duplicate XML tag?

    Hi to all gurus, Currently I am working on XSLT transformation. I encountered a problem when I have to read a random number of xml tag with the same names. sample: <product_code_list> <product_code>12345</product_code> <product_code>12333</product_co

  • In-ear for running

    i'm surprised that the Creative in-ear earphone sound so much better than my previous sony in-ear earphone but it's not suitable for running as the wire always tangle, swings and eventually fell out. I am hoping that Creative can engineered a sport s

  • Trapping errors when running in batch mode

    I use windows scheduler to run several reports in batch mode. Is there a way to continue after an error and capture a error code. I ocasionally get Fetch out of sequence errors which have to be cleared from the screen manually. I need this to automat

  • Attached libraries in wrong order in generated form

    Hello, I am using Designer 6i and upgraded 6.0 headstart templates to generate forms. In my generated form, the libraries are attached in the wrong order. For example, when I attach using called modules: - qmslib50.pll - qmsevh50.pll then the generat

  • Linuxwacom package missing

    Hello After latest Archlinux upgrade my wacom tablet (Volito 2) has stopped working normally. In Xorg logs: "No input driver matching "wacom" " I have tried to reinstall linuxwacom ( now there is linuxwacom 0.7.8-2 installed ), but: "error: 'linuxwac