US Position Attributes - T5U29 table and Tcode to maintain it
Can anybody tell me what is the importance of T5U29 table and the tcode to maintain it?
Hi Sheetal,
You can maintain this table via SM30 view V_T5U29 and its used for assigning:
Job Category (This field holds the code which corresponds to a particular job category. (Jobs are associated to job categories using a feature.))
AAP Category(This field contains the AAP (Affirmative Action Planning) category to be assigned to a job)
Occupational Classification Code(This field holds the OCC (Occupational Classification Code) which can be assigned to an EEO category.)
Also you can classify you jobs as Exempt or Non Exempt under FLSA guidelines by checking the radio button for Exempt and Non-Exempt.
One more thing in addition to above, generally we maintain attributes fr Job instead of Postion in table T5U13.
Hope this will help
guds
Edited by: guds on May 19, 2009 6:28 PM
Similar Messages
-
Process chain tables and tcodes
Hi frinds,
can any one send me the process chain tables and tcodes . plzz
regards,.
rajesh
my mail id is [email protected]Hi Rajesh,
Process chain tables:
RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
RSPC_MONITOR Monitor individual process chains
RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
RSPCCATEGORY Process Type Categories
RSPCCATEGORYT Texts for Category
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Cha
RSPCENQUEUE Dummy Table for Runtime Locks of a Process
RSPCEXOR Excluding Or: Log Table
RSPCINFO Special Values for Communication between P
RSPCINFOT Special Values for Communication between P
RSPCINSTANCE Generic Instance Storage
RSPCINSTANCET Texts for Generic Instance-Storage
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
RSPCLOGS Application Logs for the Process Chains (G
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPCTRIGGER Variants for the Trigger Processes
RSPCTRIGGERT Texts for the Trigger Variants
RSPCTYPESDEP Dependencies for Processes
RSPCTYPESPROC Attributes of BW processes (RSSM)
RSPCVARIANT Generic Variant-Storage
RSPCVARIANTATTR Attributes of a Process Variant
RSPCVARIANTT Texts for Generic Variant Storage
Regards,
R.Ravi -
Give me some PP important tables and Tcodes for abapers
give me some PP important tables and Tcodes for abapers
thank you,
Regards,
Jagrut Bharatkumar Shukla10 Production Planning (PP)
10.1 Work center
CRHH Work center hierarchy
CRHS Hierarchy structure
CRHD Work center header
CRTX Text for the Work Center or Production Resource/Tool
CRCO Assignment of Work Center to Cost Center
KAKO Capacity Header Segment
CRCA Work Center Capacity Allocation
TC24 Person responsible for the workcenter
CRCO Allocation of costcentre to workcentre
S022 Order Operation Data for Work Center
10.2 Routings/operations
MAPL Allocation of task lists to materials
PLAS Task list - selection of operations/activities
PLFH Task list - production resources/tools
PLFL Task list - sequences
PLKO Task list - header
PLKZ Task list: main header
PLPH Phases / suboperations
PLPO Task list operation / activity
PLPR Log collector for tasklists
PLMZ Allocation of BOM - items to operations
10.3 Bill of material
STKO BOM - header
STPO BOM - item
STAS BOMs - Item Selection
STPN BOMs - follow-up control
STPU BOM - sub-item
STZU Permanent BOM data
PLMZ Allocation of BOM - items to operations
MAST Material to BOM link
KDST Sales order to BOM link
10.4 Production orders
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order componenten
AFVC Order operations
AFVV Quantities/dates/values in the operation
AFVU User fields of the operation
AFFL Work order sequence
AFFH PRT assignment data for the work order(routing)
JSTO Status profile
JEST Object status
AFRU Order completion confirmations
PRTs voor production orders
AFFH PRT assignment data for the work order
CRVD_A Link of PRT to Document
DRAW Document Info Record
TDWA Document Types
TDWD Data Carrier/Network Nodes
TDWE Data Carrier Type
10.5 Planned orders
PLAF Planned orders
10.6 KANBAN
PKPS Kanban identification, control cycle
PKHD Kanban control cycle (header data)
PKER Error log for Kanban containers
10.7 Reservations
RESB Material reservations
RKPF header
10.8 Capacity planning
KBKO Header record for capacity requirements
KBED Capacity requirements records
KBEZ Add. data for table KBED (for indiv. capacities/splits)
10.9 Planned independent requirements
PBIM Independent requirements for material
PBED Independent requirement data
PBHI Independent requirement history
PBIV Independent requirement index
PBIC Independent requirement index for customer req. -
FI Accounting tables and TCodes
Hi all,
I am new to FI. It would be great if someone can provide me the FI Accounting tables and tcodes.
Please mail it to my mail id [email protected]
Your answers would be rewarded.
Regards,
PranilHi,
goto:
transaction <b>SE80</b> - device class (package) <b>FBAS</b>
and look:
1) dictionary objects - database tables
2) transactions
A.
Message was edited by: Andreas Mann -
Hi Experts,
What are the basic tables for Benefits and payroll?
What are the basic Tcodes of Benefits and Payroll?
Regards
vamsi.The rest of the HR Tables are as follows:
DD01L Domains
DD02L SAP tables
DD03L Table Fields
DD03T DD: Texts for fields (language dependent)
DD04L Data elements
DD04T R/3 DD: Data element texts
DD05S Foreign key fields
DD06L Pool/cluster structures
DD20L Matchcode Ids
DD24S Fields of a matchcode ID
T000 Clients
T001 Company Codes
T001E Company code-dependent address data
T001P Personnel Areas/Subareas
T012 House banks
T012K House bank accounts
T012T House bank account names
T500L Personnel Country Grouping
T500P Personnel Areas
T500T Personnel Country Groupings
T501 Employee Group
T501T Employee Group Names
T502T Marital Status Designators
T503 Employee Groups / Subgroups
T503K Employee subgroup
T503T Employee Subgroup Names
T504A Benefits - Default Values (NA)
T504B Benefit Option Texts (North America)
T504C Benefit Type (NA)
T504D Benefit Credit Group Amount
T504E Benefit Amount
T504F Benefit Costs
T508A Work Schedule Rules
T508T Texts for Employee Subgroup Groupings for Work Schedules
T510 Pay Scale Groups
T510A Pay Scale Types
T510F Assign Pay Scale > Time Unit, Currency
T510G Pay Scale Areas
T510H Payroll Constants with Regard to Time Unit
T510I Standard Working Hours
T510J Constant Valuations
T510L Levels
T510M Valuation of pay scale groups acc. to hiring date
T510N Pay Scales for Annual Salaries (NA)
T510S Time Wage Type Selection Rule
T510U Pay Scale Groups
T510Y Special Rules for Wage Type Generation
T511 Wage Types
T512R Cumulation Wage Types in Forms
T512S Texts for Cumulation Wage Types in Forms
T512T Wage Type Texts
T512W Wage Type Valuation
T512Z Permissibility of Wage Types per Infotype
T513 Jobs
T514S Table Name Texts
T514T Field Name Texts
T51D2 Wage Type Classes
T51D3 Reduction Rules
T51D4 Cumulation Rules
T527X Organizational Units
T528B Positions - Work Centers
T528C Wage Type Catalog
T528T Position Texts
T529A Personnel Event
T529F Fast Data Entry for Events
T529T Personnel Event Texts
T52BT Texts For HR Objects
T52C0 Payroll Schemas
T52C1 Payroll Schemas
T52C2 Texts for Personnel Calculation Schemas
T52C3 Texts for Personnel Calculation Schemas
T52C5 Personnel Calculation Rules
T52CC Schema Directory
T52CD Schema Directory
T52CE Directory of Personnel Calculation Rules
T52CT Text Elements
T52CX Cross References via Generated Schemas
T52D1 Valid Processing Classes
T52D2 Valid Values for Processing Classes
T52D3 Valid Evaluation Classes
T52D4 Permitted Values for Evaluation Classes
T52D5 Wage Type Groups
T52D6 Wage Type Group Texts
T52D7 Assign Wage Types to Wage Type Groups
T52D8 Valid Processing Classes - Texts
T52D9 Valid Values for Processing Classes - Texts
T530 Reasons for Events
T530E Reasons for Changes
T530F Reasons for Changes
T530L Wage Types for Special Payments
T530T Event Reason Texts
T531 Deadline Types
T531S Deadline Type Texts
T533 Leave Types
T533T Leave Type Texts
T539A Default Wage Types for Basic Pay
T539J Base Wage Type Valuation
T539R Events for Standard Wage Maintenance
T539S Wage Types for Standard Wage Maintenance
T548 Date Types
T548S Date Conversion
T548T Date Types
T548Y Date Types
T549A Payroll Areas
T549B Company Features
T549C Decision Trees for Features (Customers)
T549D Feature Directory
T549L Date modifiers
T549M Monthly Assignment: Payroll Period
T549N Period Modifiers
T549O Text for date modifier
T549P Valid Time Units for Payroll Accounting
T549Q Payroll Periods
T549R Period Parameters
T549S Payroll date types
T549T Payroll Areas
T549M Monthly Assignment: Payroll Period
T549N Period Modifiers
T549O Text for date modifier
T549P Valid Time Units for Payroll Accounting
T549Q Payroll Periods
T549R Period Parameters
T549S Payroll date types
T549T Payroll Areas
T554S Absence and Attendance Types
T554T Absence and Attendance Texts
T554V Defaults for Absence Types
T554Y Time Constraints in HR TIME
T555A Time Types
T555B Time Type Designations
T559A Working Weeks
T559B Name of Working Week
T572F Event Texts
T572G Allowed Values for Events
T572H Event Value Texts
T582A Infotypes
T582B Infotypes Which Are Created Automatically
T582S Infotype Texts
T582V Assignment of Infotypes to Views
T582W Assigns Infotype View to Primary Infotype
T582Z Control Table for PA Time Management
T584A Checking Procedures - Infotype Assignment
T588A Transaction Codes
T588B Infotype Menus
T588C Infotype Menus/Info Groups
T588D Infogroups for Events
T588J Screen Header Definition
T588M Infotype Screen Control
T588N Screen Modification for Account Assignment Block
T588O Screen Modification for Assignment Data
T588Q Screen types for fast entry
T588R Selection Reports for Fast Data Entry
T588S Screen Types for Fast Entry
T588T Menu and Infogroup Designations
T588V Business object type
T588W Event types for infotype operations
T588X Cust. composite definition of event types for IT operations
T588Z Dynamic Events
T591A Subtype Characteristics
T591B Time Constraints for Wage Types
T591S Subtype Texts
T596F HR Subroutines
T596G Cumulation wage types
T596H _Cumulation wage type texts
T596I Calculation rule for cumulation wage types
T596U Conversion Table
T599B Report Classes
T599C Report Classes
T599D Report Categories
T599F Report Classes - Select Options
T777A Building Addresses
T777T Infotypes
T777Z Infotype Time Constraints
T778T Infotypes
T778U Subtypes
Error Messages tables
T100 Messages
T100A Message IDs for T100
T100C Control of messages by the user
T100O Assignment of message to object
T100S Configurable system messages
T100T Table T100A text
T100V Assignment of messages to tables/views
T100W Assign Messages to Workflow
T100X Error Messages: Supplements -
Tell me waht r the table used in MM & where can I find it.
Similiarly tell me what r the T.Code used in MM & where can I find it.
answers will be rewarded
regards,
SunilCheck http://www.sap-img.com/sap-mm.htm
http://www.sap-img.com/materials/common-tables-used-by-sap-mm.htm
MATERIAL MANAGEMENT TABLES
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
T024E Purchasing organization / company code
T024W Plant to Purchase organization
T001K Link plant ( = valuation area) / company code
TVSWZ Shipping point to plant
T320 Assignment MM Storage Location to WM Warehouse
7 Material Management (MM) :
7.1 Material document
MKPF material document
MSEG material document (item level)
7.2 Purchasing
EKKO Purchase document
EKPO Purchase document (item level)
EKPV Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
EKET Delivery schedule
VETVG Delivery Due Index for Stock Transfer
EKES Order Acceptance/Fulfillment Confirmations
EKKN Account assignment in purchasing
EKAN Vendor address purchasing
EKPA Partner functions
EIPO Item export / import data
EINA Purchase info record (main data)
EINE Purchase info record (organisational data)
EORD Source list
EBAN Purchase requisition
EBKN Purchase Requisition Account Assignment
MM links:
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://easymarketplace.de/online-pdfs.php
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
kishan negi -
Hi All,
I need to know which are important tables and TCodes in CRM.
Thanks in advance,
Subbu.HI
Tables should be same as normal CRM tables. If you want some function modules which are called from ISA - you can find that by doing an F4 with ISA in SE37.
Some of the important Function Groups are - CRM_ISALES_BUPA, CRM_ISALES_IUSER, CRM_ISALES_ORDER .
Important Function module -
CRM_ISA_BASKET_CREATE Create Order
CRM_ISA_BASKET_CHANGEITEMS set item data
CRM_ISA_BASKET_CHANGEHEAD change Header level data
Here is the list of the transaction related to the component CRM-BTX-COM:
S_A4C_68000035
S_A4C_68001025
S_PIC_80000064 IMG Activity: CRM_REK_CODE
S_PIC_80000067 IMG Activity: CRM_DEFCLA
S_PIC_80000070 IMG Activity: CRMV_DEFCLA
May be I will try to explain the same thing once again. Go to transaction SE93. You will see one input field Transaction code. Place your cursur there and press F4 one window will popup. Place the cursur in the field Application component and again press F4 you will see anothe window with the tree structure and from here keep on expending the tree till you reach your desired component and double click on it. Finally press enter and you will see all the transactions relevent to your component. Hope this will help. If you need the CRM data model give me your mail ID i will forward the same to you.
Hope this helps.
Regards Rk -
Position Control of compumotor linear servo table and GV-U6E with PCI-7344
I'm referring PCI-7344 (not 7334).
I have the GV-U6E which is a drive only and does not possess control functionality. the drive only version does not store or use programs. So, serial commands can not be sent through COM port by LabVIEW even though A few basic commands can be emulated.
I am trying to do position control as I mentioned. For example, the motor should move A point to B point exactly with a certain speed. The points must be aboulte position.
I would like you to see the reference comment that I have been contacting with in your website forum.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000DD490000&USEARCHCONTEXT_CATEGORY_0=_14_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_14_&UCATEGORY_S=0
Regard,
Jin Ho Lee
----- Original Message -----
From:
To:
Sent: Thursday, September 26, 2002 5:00 PM
Subject: Re: (Reference#1549-QYW196) "Position Control of linear servo table and GV-U6E with PCI-7344
>
> Note: Your reference number is included in the Subject field of this
> message. It is very important that you do not remove or modify this
> reference number, or your message may be returned to you.
>
>
> JinHo. Compumotor is a very popular brand, and I know of several customers
> who integrate our 7334 with Computmotor drives. However, when you say that
> the MAX configuration doesn't fit in the compumotor drive settings, are you
> referring to the specs from the 7344? It looks like the 7344 and the
> Compumotor will work well together through a UMI break out box. If you're
> referring to specific commands that the Compumotor receives, I'd have to
> know more about the protocol. If the Compumotor needs serial commands,
> then you can send them through the computer's COM port from LabVIEW.
> Please let me know exactly what kind of configurations you're trying to
> set. The 7344 can be completely configured in MAX and LabVIEW.
>
>
> Best Regards
>
> Kyle Voosen
> Applications Engineer
> National Instruments
> http://www.ni.com/support
>
> ------------------------------------------------------------------------------
>
> Problem Description :
> "Position Control of compumotor 406LXR linear servo table and GV-U6E(motor
> drive) with PCI-7344"
>
> "Since I had the answers referring:
> http://exchange.ni.com/servlet/ ProcessRequest?RHIVEID=101&RPAGEID=135&
> HOID=506500000008000000DD490000& USEARCHCONTEXT_CATEGORY_0=_14_&
> USEARCHCONTEXT_CATEGORY_S=0& UCATEGORY_0=_14_&UCATEGORY_S=0
>
> Wiring step was done well. However, I still have a problem that MAX
> configuration doesn't fit in compumotor drive settings. Therefore, the
> setup is shown below, and I want to know how I can set up PCI-7344
> configuration in MAX or LabVIEW VI.
>
>
> -----------------------------------------------------
>
> Uploaded from device address 0
>
> Gemini GV Servo Drive Setup
>
>
>
> Motor Setup
> DMTR 1703
> Motor ID (406-x-LXR-M-x-D13-x-x-x-x-E5-x-x-x)
> DMTIC 2.48
> Continuous Current (Amps-RMS)
> DMTICD 0.00
> Continuous Current Derating (% derating at rated speed)
> DMTKE 17.6
> Motor Ke (Volts (0-to-peak)/krpm)
> DMTRES 10.10
> Motor Winding Resistance (Ohm)
> DMTJ 119.300
> Motor Rotor Inertia (kg*m*m*10e-6)
> DPOLE 1
> Number of Motor Pole Pairs
> DMTW 40.5
> Motor Rated Speed (rev/sec)
> DMTIP 7.40
> Peak Current (Amps-RMS)
> DMTLMN 3.4
> Minimum Motor Inductance (mH)
> DMTLMX 3.4
> Maximum Motor Inductance (mH)
> DMTD 0.000000
> Motor Damping (Nm/rad/sec)
> DMTRWC 0.23
> Motor Thermal Resistance (degrees Celsius/Watt)
> DMTTCM 20.0
> Motor Thermal Time Constant (minutes)
> DMTTCW 0.33
> Motor Winding Time Constant (minutes)
> DMTAMB 40.00
> Motor Ambient Temperature (degrees Celsius)
> DMTMAX 90.00
> Maximum Motor Winding Temperature (degrees Celsius)
> DHALL 1
> Disable Hall Sensor Checking
> DMTLQS 0
> Set Q Axis Inductance Saturation
> DMTLDS 0
> Set D Axis Inductance Saturation
> DTHERM 0
> Disable motor thermal switch input
>
>
>
> Drive Setup
> DMODE 2
> Drive Control Mode
> DRES 8400
> Drive Resolution (counts/rev)
> DPWM 16
> Drive PWM Frequency (kHz)
> SFB 1
> Encoder Feedback
> ERES 8400
> Encoder Resolution (counts/rev)
> ORES 8400
> Encoder Output Resolution (counts/rev)
> DMEPIT 42.00
> Electrical Pitch (mm)
> SHALL 0
> Invert Hall Sensors
> DMTLIM 1.5
> Torque Limit (Nm)
> DMTSCL 1.5
> Torque Scaling (Nm)
> DMVLIM 119.000000
> Velocity Limit (rev/sec)
> DMVSCL 119.000000
> Velocity Scaling (rev/sec)
>
>
>
> Load Setup
> LJRAT 0.0
> Load-to-Rotor Inertia Ratio
> LDAMP 0.0000
> Load Damping (Nm/rad/sec)
>
>
>
> Fault Setup
> FLTSTP 1
> Fault on Startup Indexer Pulses Enable
> FLTDSB 1
> Fault on Drive Disable Enable
> SMPER 8400
> Maximum Allowable Position Error (counts)
> SMVER 0.000000
> Maximum Allowable Velocity Error (rev/sec)
> DIFOLD 0
> Current Foldback Enable
>
>
>
> Digital Input Setup
> INLVL 11000000
> Input Active Level
> INDEB 50
> Input Debounce Time (milliseconds)
> INUFD 0
> Input User Fault Delay Time (milliseconds)
> LH 0
> Hardware EOT Limits Enable
>
>
>
> Digital Output Setup
> OUTBD 0
> Output Brake Delay Time (milliseconds)
> OUTLVL 0100000
> Output Active Level
>
>
>
> Analog Monitor Setup
> DMONAV 0
> Analog Monitor A Variable
> DMONAS 100
> Analog Monitor A Scaling (% of full scale output)
> DMONBV 0
> Analog Monitor B Variable
> DMONBS 100
> Analog Monitor B Scaling (% of full scale ouput)
>
>
>
> Servo Tuning
> DIBW 1500
> Current Loop Bandwidth (Hz)
> DVBW 100
> Velocity Loop Bandwidth (Hz)
> DPBW 40.00
> Position Loop Bandwidth (Hz)
> SGPSIG 1.000
> Velocity/Position Bandwidth Ratio
> SGIRAT 1.000
> Current Damping Ratio
> SGVRAT 1.000
> Velocity Damping Ratio
> SGPRAT 1.000
> Position Damping Ratio
> DNOTAF 0
> Notch Filter A Frequency (Hz)
> DNOTAQ 1.0
> Notch Filter A Quality Factor
> DNOTAD 0.0000
> Notch Filter A Depth
> DNOTBF 0
> Notch Filter B Frequency (Hz)
> DNOTBQ 1.0
> Notch Filter B Quality Factor
> DNOTBD 0.0000
> Notch Filter B Depth
> DNOTLG 0
> Notch Lag Filter Break Frequency (Hz)
> DNOTLD 0
> Notch Lead Filter Break Frequency (Hz)
> SGINTE 1
> Integrator Option
> SGVF 0
> Velocity Feedforward Gain (%)
> SGAF 0
> Acceleration Feedforward Gain (%)
> -----------------------------------------------------
>
>
> Regards,
> JinHo"
> NI Software :
> LabVIEW version 6.0
> NI Hardware :
> Motion Control device PCI-7344
> Driver Version :
> no
> OS :
> Windows 2000
> CPU :
> Pentium
> RAM :
> 128
> Vendor :
> DELL
> Customer Information :
> Jin Ho Lee
> North Carolina State Univ.
> US
> [email protected]
> Ph: (
> 919
> )
> 512-9929
>
>Yes, we used an NI PXI-7344 motion control card with an NI UMI-7764 box connected to a Gemini GV-U12E servo drive. (which is a drive only.)
We did positional control in absolute position mode.
I can send you an AutoCAD schematic detailing how to connect the UMI-7764 to the Gemini GV servo drive.
In regard to the Rs232 interface to the GV servo drive,
the GV drive only model is "configurable" not "programmable". You can create unique GV configuration files with Compumotor's Motion planner then download the configuration via Rs232 using LabVIEW as desired. Or, using LabVIEW via Rs232 you can change individual GV drive parameters on demand,
or use the GV's two analog outputs back to LabVIEW's analog inputs to measure commanded motor current or torque, etc.etc.etc -
How to find all the DDIC tables and fields of Tcode?
Hi All,
For several transactions we have caprtured all the filed names along with the technical names.
Ex : in VA03 - in the initial screen ,postal code field is there.When i see F1 help for that field i could see POST_CODE2 as its technical name.
But i want to see the actuall DDIC table field which corresponds to this field that is LFA1-PSTLZ.
Like wise there are so many T-codes for which i need do the same thing.But for some transactions i am unable to find out the database tables and the corresponding fields.Please suggest any other easier way to do this.
Is there any way to find out all the DDIC tables and fields that gets updated for a Tcode?
Please help me out in this.
Thanks,
Jyothi D.
Edited by: jyothi dosapati on Mar 27, 2008 2:48 PMHI,
DDIC tcode is SE11
GIVE THE TABLE NAME THERE AND CLICK DISPLAY
FOR EXAMPLE
TYPE LFA1 THERE AND CLICK DISPLAY....
Regards,
V .Balaji
Reward if usefull -
List of SQL tables and attributes used in SSRS reports
Hi,
I have around 450-500 reports deployed in SSRS reporting server.
All these reports are built on SQL from multiple databases, and these databases are having unnecessary tables and attributes.
My requirement is to clean the unused tables and attributes from the databases. For this, I need the list of SQL tables and attributes used in these 450-500 SSRS reports.
Is there any way to get this data?
Regards,
RKHi RK,
According to your description, you want to get a list of the tables and attributes used in all reports.
In your scenario, you can query the ReportServer.dbo.Catalog table to get Report name, data source name, dataset name, and query used in the dataset with query below:
WITH XMLNAMESPACES ( DEFAULT 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition', 'http://schemas.microsoft.com/SQLServer/reporting/reportdesigner' AS rd )
SELECT ReportName = name
,DataSetName = x.value('(@Name)[1]', 'VARCHAR(250)')
,DataSourceName = x.value('(Query/DataSourceName)[1]','VARCHAR(250)')
,CommandText = x.value('(Query/CommandText)[1]','VARCHAR(250)')
,Fields = df.value('(@Name)[1]','VARCHAR(250)')
,DataField = df.value('(DataField)[1]','VARCHAR(250)')
,DataType = df.value('(rd:TypeName)[1]','VARCHAR(250)')
--,ConnectionString = x.value('(ConnectionProperties/ConnectString)[1]','VARCHAR(250)')
FROM ( SELECT C.Name,CONVERT(XML,CONVERT(VARBINARY(MAX),C.Content)) AS reportXML
FROM ReportServer.dbo.Catalog C
WHERE C.Content is not null
AND C.Type = 2
) a
CROSS APPLY reportXML.nodes('/Report/DataSets/DataSet') r ( x )
CROSS APPLY x.nodes('Fields/Field') f(df)
ORDER BY name
For more information, please refer to this similar thread:
Extract metadata from report server database
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Table contain user name and tcode
Dear Experts,
Can you tell me which Table contained user name and tcode field?
Thanks and Best regards,
wilsonYou need to be even more carefull with parameter transactions.
If SU24 is not maintained for them, PFCG will pull the proposals from the core transaction (via which the parameters are used in the skip screen feature...). If the core transaction has authority proposals for S_TCODE, then you will get those tcodes and their proposals as well.
A carefull choice of menu objects (not only limited to Tcodes), taking heed of SU24 defaults and tuning it to meet your needs is the key. But it requires organizational discipline and good training, otherwise rather dont use it for anything other than important objects which you want to control manually only, even if your business roles are a mess.
You can also restrict the authorizations of the security admins for example (as unpopular as that may sound... to segregate authorization concept development (SU24 etc), role building development (PFCG etc) and user administration (SU01 etc). Object S_USER_TCD also has a field called TCD...
There are also other objects (as Dipanjan has pointed out) which have TCD as a field of an object which is not S_TCODE. In addition to I_TCODE, Q_TCODE, P_TCODE, see also S_IDOCMONI for example.
To be honest I have given up on trying to find them all
The easiest solution is to use the menu and maintain SU24 when the transaction is configured or the application is developed and tested. That is what SAP does as well in SU22. It is more work upfront, but more sustainable in the long run.
If your users (and auditors) only see the menu (and use the SUIM --> Executable transactions) options, then you can get away with it in the short or even medium term. Latest when someone else need to maintain the roles they will hate it...
My 2 cents,
Julius -
Extract schema/metadata - names for all tables and attributes
Hi, I am quite new to Oracle DB (only been doing dev mostly with sqlserver before). Is there a way to extract schema (names for all tables and attributes) for 10g and 11g in application code (either java or .net) or pl/sql?
Thank you,
-TonyThere are built in views that start with DBA_, ALL_, and USER_. All means all the user can see, user means all the user has, and dba means everything, which generally means the same as the others plus an owner. So you can desc user_tables to see what-all that view has, then select columns from the view with ordinary sql. See the doc set for all the views available, interesting ones are ...views, ...objects, ...tab_cols and so forth.
There are also built in procedures for getting metadata, google for details.
Many tools have easy GUI's for this too. EM has ways on the administration screen to get to various objects, and then you can show the ddl. Maybe sqldeveloper has something too. -
Colspan and rowspan attributes in table cells
Is there a way to add 'colspan' or 'rowspan' attributes to a cell in a table using the RoboHelp UI? Of course, it's very simple to just edit the HTML directly, but I'm preparing documents that will be used in the future by executives, and like most executives they are barely computer-literate.
Hi there
In the RoboHelp HTML UI, the author selects the affected cells and chooses to merge them by either clicking the Table menu and choosing Table > Merge Cells or by clicking the Merge Selected Table Cells icon in the Tables and Borders toolbar.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks -
Position Attributes as Grade Bucket and onsite and Offshore
Hi Friends,
My client do the AOP process (Annual Operating Plan process) every year. During the AOP process he will made the number of positions required for the next year based on Organization unit, Positions, Grade bucket and Onsite/Offsite position.
consider --
Org Unit as- Oracle Apps
Position as - Functional Consultant
Grade Buckets in the company are 3. The grades are taken as employee subgroup in Personnel Structure we are having the grades as A,B,C,D,E,F,G,H,I,J,K,L. In which A to E as one grade bucket and F-H is other and H and above is the another grade bucket. This Grade bucket to be attached to the Position.
Onsite and Offshore- Whether the position is required for Onsite or Offsite.
For eg: In the AOP process if 100 positions are required for Oracle Apps unit positions as Functional Consultant in which 80 are required in A-E grade bucket out of which 70 position are for offsite and 10 positions are for onsite and 20 in G-I grade bucket out of which 15 for offsite and 5 for onsite. This way the projections will be done and head count budget will also be based on the same.
What could be the probable solution for attaching these attributes to the position and if i run the report on the same i should get the vacant positions also with these attributes. Please help me.
Thanks and Regards,
Sridhar VHi Gurus,
Please give some solution if, anyone come across such scenario.
Regards,
Sridhar V -
What is the Tcode for Aggregate Statstics Table and PSA table
What is the Tcode for Aggregate Statstics Table and PSA table
Hii raina..
There is no such perticular Tcode to check PSA data . Go to RSA1 and open ur DS . Right click and say manage. U will get PSA data.. But their should be data in PSA
I hope thjis is useful to u.
Maybe you are looking for
-
Sending an email with attachment with method SENDTASKDESCRIPTION.
Hi everyone sorry for my english_; in custom workflow I set a Send Mail's step. If i try to send an email without attachments with method SENDTASKDESCRIPTION, the function SWW_SRV_MAIL_SEND return sy-subrc eq 0 and the email wa sent. If I try to atta
-
Hi All, I have a required field in module pool programming. When i press Exit push button message displays "Fill in all required entry fields". I want to exit from program without fill any field. Is it possible. plz help me
-
To access a 11gr1 db from remote server which parameters needs to be set
Hi, I would like to access my db from a remote server, for this which parameters i need to set? Thanks,
-
Mac book pro(with retina) to apple tv (3rd gen)
i am sure that this question has probably been answered so if it has I'm sorry... but a google search is telling me that my apple tv/ computer are out of date or i can't push the button. i am on the same network as my apple tv, i see the button to ai
-
I new to Java,I have one basic doubt regarding JVM, Is JVM designed by the OS developers or SUN itself design the different JVMs for the different Operating Systems?