US PY - Processing Class and Cumulations

Hi expert,
I am facing following scenario , plz help me to sort that out...
I have defined WT 1GAW,1GCC,1GSP, 1GBN
AW - Award,
CC - City Component
SP - Shift Allowance
BN - Bonus
1GAW Weekly & Hourly
1GSP Salaried & Weekly
1GCC For all
1GBN For all
Under processing class and Cumulation ... Which category I have to select out of
o
1
2
3
4
5
6
Your prompt reply appreciated...Points would be given..
Regards,
Sejal

Hello Sejal,
When you create a WT use the Copy function from SAP Delivered model WT when creating the WT, so that the default setting of all the Processing class and Cummulation class with respect to Model WT will be there in Created WT also. So that you can do only minimal changes when required for the WT.
With Regards,
S.Karthik

Similar Messages

Processing classes , evaluation classes and cumulation classes

Hi All ,
   Can anybody give the details of PCR in HR and how to use processing classes and evaluation classes in PCR.
Regards ,
Santosh.

Hi,
we have an operation VWTCL which checks the Processing class and its specification in PCR.
go to T.Code: PE04 and check the operations documentation you will get clarity.
Operation VWTCL VV reads the specification of processing class VV for the current wage type in table T512W, and enters this as a single-character entry in the variable argument of the personnel calculation rule. Function VWTCL is a decision operation.
for example:
X010 Determination of valuation bases INTERNATIONAL
        VWTCL 01   Processing class
            ERROR      Cancel processing
          0
            ADDWT *    OT   Output table
    1
        VWTCL 01   Processing class
          0
          1
            ADDWT *    OT   Output table
            ELIMI Z    Elim.time period ID
Regards,
mohammed

Evaluation classes and cumulation classes

Hi All ,
Can anybody give the information about evaluation classes and cumulation classes in HR and how they affects the payroll.It is better for me if any one give the scenario to understand these concepts.I know the basics of these things i.e in which view these details are maintained for wagtypes.
Thanks in advance.
Regards ,
Santosh.

Hi Santosh,
For any wagetype to process in payroll these cummulation class and evlatuion class is important.As payroll is Country specific each county has specific base for calculating Cummulation class.
Cummulation Class: In payroll there are two types of cummulation
(a) Cummulation of wage types over another wage type
(b) Cummulation of wage types over a period of time
For the first one it is used to calculate the base for different tax calculation. It is represented by /1 series wage types. Examples For HRA Basis it is /111 and the base is mainly Basic+DA...etc.
For the second one it is calculated by Processing class 30 Specification 0,1,2,3 and T. The related tables are V-T54c1, V_T54c4 and V_T54c3
Evaluation Class: This is used mainly for reports i,e Form 16, Form 24, Payslips etc. In India mostly used Evaluation classes are
02 - For Payments and Deductions in Payslip
06 - For Sec 17(1) For Total Gross
07 - For Sec 10 Deductions
09 - For Sec 17(3) For Perks
08 - For Sec 17(2) For Income from other sources
11 - For Sec 217 2 (A)
* All these reports you can see in table V-T512w_D or V_t512w_O
I think this will help you
Best Regards
Baidya

Processing classes and evaluation classes

hi there could some one tell me the best site to understand processing classes and evalution classes of Great Britian Payroll.(or anyother documentation)
many thanks
srikanth

These are a few which are Uk specific.But I dont want to proof anything to you .So if you dont tell me why you require the meaning of a PR class I dont think I can help you. Thanks anyways.
50 Deductions processing using 'Ba
61 Deduct GB court orders from net
62 Deduct from taxable pay -->CYCL
63 GB deductions from working net
64 GB SSP/SMP absence amounts -->

PROCESSING.EVALUATION AND CUMULATION CLASS

Hi,
Can anyone send me the link/document for processing ,cumulation and evaluation class.
I want to complete usage .
I tried searching in forum but in vein.
Regards
Ananthi.M
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4685459
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4605028
processing class
I got these From the forum search
Regards
Ananthi.M
Edited by: Sikindar on Feb 18, 2010 1:27 PM

I got these From the forum search
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4685459
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4605028
processing class
Edited by: Sikindar on Feb 18, 2010 1:30 PM

Processing classes, cumulation classes and evaluation classes

Hi Friends,
What is the diff between processing classes, cumulation classes and evaluation classes. where we see these three and what is the table no. for this?

.) Processing Class - A wage type characteristic that controls processing during Payroll. There are different processing classes for the various processing steps that are performed within Payroll. During the payroll run, SAP R/3 processes a wage type in a specific processing step according to its individual specification in the respective processing class.
Cumulation class - Cumulation class are used to cumulate the model wage types to generate the /1** technical wage types.
Example - Processing class 20 is used for cumulation and processed by PCR X023. Now suppose you have set specifiction as 8. Now if you will check PCR X023 for spec 8, it says to cumulate wage type into cumulation class which are ticked. Like may be you want to cumulate a model wage type into /101, set PCL 20 as 8 and tick cumulation class 1.
Evaluation Class - Wage type characteristic that controls processing when payroll results are evaluated and displayed. There are various evaluation classes for the different processing steps that are performed when payroll results are evaluated and displayed.
Example
In the standard system, the specifications for evaluation class 02 determine how a wage type is printed on a form that is payslip.
Specification 00: no printing on the form
Specification 01: prints personal payments/deductions
Specification 02: prints wage types included in the total gross amount
Specification 03: prints wage types derived from time-based payments and included in the total gross amount

Evaluation Class, Cumulations Class, & processing class: Indian Payroll

Dear All.,
Indian Payroll
What are the Evaluation Class, Cumulations Class, & processing class we need to maintain for ESI Eligibility for a Wage Type ?
Scenario : Except LTA all other Salary Components(as part of Infotype 8) consider for ESI Eligibiilty. So I wanted to check all other WTs.
Pls guide me how do i can deal with this.

Use t-code PC00_M99_DLGA20 to generate the "Use of WT in Payroll" report, for Country Grouping 40, without specifying any WT, and using the WT Validity Dates from Today to Today.
When the report is on screen, double click on "Meaning of processing classes and their values".
Click on any character in the report's description of Processing Class 01, and use the Binoculars to search for ESI. The system should show 4 "hits", all on PrCl 72.
I don't know anything of Indian Payroll, but it would seem that PrCl 72 is relevant for ESI. Use this report to see what WTs cumulate or don't cumulate into ESI/PTX basis (drill down in each line of PrCl 72).

Report for finding wage types using a processing class.

Hi All,
Is there any standard report that gives a list of all wage types that use a processing class given as input?.
Thanks,
Krish

You can use the wage type utilization for this. Go to transaction PC00_M99_DLGA20. Leave the wage type selection fields blank. Select "Continuous list" as your output. Click on the execute button. You will see the meaning of processing classes and their values. If you scroll down past this (should be page 3 if you look for the number to the right side of the screen), you will see a list of the processing classes and which wage types are assigned to the class by valuation. I don't know of any other standard reports to get you this information. I hope this helps.
- April King

Processing Classes

Hi,
How to create Processing Class? How to add more gto existing processing classes? How many processing classes can be used in PCR i mean limit of processing classes in PCR?
bye
phanikumar

U can create ur processing classes by going to SPRO->Payroll->Payroll India(if India PY)->Basic Settings-> Environment of Wage Type Maintenance -->Processing and Evaluation Classes --> Maintain Processing Classes and Their Specifications.
U can create procesing classes as many but I think beyond 2 numbered number U cannot create.
in PCRs U can use all the processing classes defined in the system.
award points if helpful.

Processing class 10 and partial period factor specification /807

dear experts,
I want to know the difference in specification of /801 or /802 or 803 or /804 or /805 or /807 when we give or maintain processing class 10 for an y customised wage type in table v_t512w_d. there is no documetation for /806 or /807 wage types .can any one send me the documetation on this or explain

Just go to X013 PCR. There you can find the documentation.
Open the PCR in display mode and press F1 for documentation.
Reward the points.
Venu

Smatrform and processing class

Hi,
I'm New to SAP CRM.
My requirement is to send a the activity transaction details to a customer as a PDF in the smartforms.
Here we can execute the action using a Smartform or Method call.
How to go about it.
How can we know the processing class for a gievn smartform. In which table can we find the entries or relationships between a smartform and processing class.
Regards
Lekha

Hi,
I am sorry. I am not able to understand ur question properly. Actually i did some smartfroms work in my organisation relating to CRM 2007.
Here, our functional people first assign the standard method and class and smartform. Then take a sample data. Then i used to copy the std form to zform and apply my logic in program lines. I got success.
The std methods and classes depend on the action type.
in service area i used.
cl_doc_processing_crm_order (processing class)
crm_srvorder_exec_smart_form (method).
if u goto std one u find a lot.
u better get the details from the funtional team.
hope this will help you.
best wishes,
mallik

What is Processing Method and Processing Class in Action Profile

Dear all,
I have defined an action for case management, to trigger an email after saving the case in Enterprise portal.
Action is getting initiated in case document after saving, but after a while it is showing message 'Incorrect'.
In the actions monitor report, error message showing that some problem in Processing Method.
In my action I have maintained settings as below.
Form name - SCMG_SMART_FORM_CASE
Processing class - CL_SCMG_CASE_CONTEXT_PPF
But I don't know what processing method should I give
I could not find and values under F4 functionality.
Please do advice me what method I can use here.
and why we use processing method and processing class.
your help will be highly appreciated.
Thank you
Raghu ram

Hi
DSD means Daily Salary Deduction for more check this table to understand abd DSD and the respective Processing class 77 V_T7INO1

Help with Runtime class and timeout of Process

Hi,
Question regarding using Runtime class, and yes I have looked at the javadocs, but I am still confused and frustrated.
Here is part of my code.
Process p;
Runtime runtime = Runtime.getRuntime();
p = runtime.exec("rsh localhost ls");
if you are not familiar with rsh all it does is remote shell into the computer localhost and executes the command ls.
Now, I dont have rsh running on my computer so it will hang at that line for about 40 sec and eventually time out on its own. Is there anyway I can specify a timeout argument like there is for the ping command? Like if there is no response from localhost after 3 sec, then just kill the process?
I looked at the Runtime javadoc and Process javadoc and the closest thing I could come to with is something to do with envp (environment parameters), but I dont know what that is.
Thanks guys.

You can't timeout the "runtime.exec("rsh localhost ls");" call but if you execute the call in a seperate thread you can "timeout" and continue executing on the original thread (while letting the "runtime" thread to timeout on its own).
Check the following class that I created for cases like this:
abstract public class TimeoutHelper implements Runnable
    private Throwable error;
    private boolean running = true;
    private Object retValue;
    protected String name;
    private long waitTime;
    private Thread thread;
     * Creates a new helper. Use {@link #start} to run the code.
     * @param name A name that will be used in the helper thread name
     * @param waitTime The time (in msec) to wait before timeout.
    public TimeoutHelper(String name, long waitTime)
        this.name = name;
        this.waitTime = waitTime;
    public Object start() throws Throwable
        return asyncExecute();
    abstract protected Object execute() throws Throwable;
    private synchronized Object asyncExecute() throws Throwable
        createThread().start();
        if (running)
            try
                wait(waitTime);
                if (running)
                    // Timeout!!
                    abortThread();
                    throw new TimeOutException("Timeout for: " + name);
            catch (InterruptedException ie)
                // Ignore
        if (error != null)
            throw error;
        return retValue;
    private void abortThread()
        if (thread != null)
            thread.interrupt();
    protected Thread createThread()
        thread = new Thread(this, name);
        return thread;
    public void run()
        try
            retValue = execute();
        catch (Throwable th)
            error = th;
        synchronized (this)
            running = false;
            notifyAll();
}You use the class by extending it and implementing "execute". For example:
        TimeoutHelper helper = new TimeoutHelper("Runner", 5000)
            protected Object execute() throws Throwable
                Runtime runtime = Runtime.getRuntime();
                return runtime.exec("rsh localhost ls");
        try
            Process p = (Process)helper.start();
        catch (TimeOutException e)
            // Handle timeout here
        catch (Exception e)
            // Handle other errors here.
        }

Processing Classes in PY-IN

Hi All,
I have one small query. In my system, 1 wage type is getting projected on monthly basis i.e. every month, its getting added in the gross salary and showing up in Remuneration Statement. Whereas it shud get projected on yearly basis.
Please advise by which processing class we can control the same.
Regards

Evaluation Classes
Evaluation Classes are generally used for reporting purpose. There are 20 possible evaluation classes. For each evaluation class, there will be a subset of values. The payslip and the Payment summary use evaluation classes. So u2013 For example : the payment summary uses evaluation class 11. SAP provides default settings for evaluation class 11 (Such as Taxable Gross, Tax, Lump sum A, Lump sum B etc). The consultant will go into each wagetype and set evaluation class 11 to a value based on where it is to be reported onto the payment summary.
Cumulation Class
This is used for storing certain wagetypes into a bucket. The bucket is the /1nn wagetypes. So, if a wagetype had cumulation class 01 set, this will add the value of this wagetype into /101 wagetype. This is actually how the total gross works as all wagetypes which are gross wagetypes are set with cumulation 01 which cumulates into /101 (Total gross).. Other uses for this are taxable gross, superannuation totals, totals for allowances, totals for deductions, etc.. There are 100 cumulation classes. These are either turned on or off.
Hope This will help you.
Regards

How do we know that which processing Class doing what functionality ?

Hi SAP HR Experts .
Q:-1 How do we know that which processing Class doing what functionality ?
Like : Processing class 1 , 2 ,... etc .
Similerly Simulation Class is On (Check Box is Ticked) then what impact we occur ?
Kind Regards : rajneesh

Hi Rajneesh,
The best way to understand the processing class is to go thru each and every class in table T512W_D ( Go to SM30 -> t512w_d ).Here in this table you will have the wagetypes ,just double click on the wagetypes and you will find the screen with processing classes. Just go thru each and every class by f1 . Each class is having its own importance and implication.
Same with Cumulation class. Go to SM30 -> enter T54C3. Follow the same logic here too, and try to analyse the max thru f1.
This is how we can understand the logic.
Regards,
Sri..

US PY - Processing Class and Cumulations

Similar Messages

Maybe you are looking for