Usage and storage

I recently just deleted some apps and things on my iPhone 4 to clear up some storage space. It was completely full, but getting close. I think i had sbout 1 GB available. Then yesterday, it suddenly says that the storage is full, and 0 bytes available. Just doesn't add up to me. Wasn't full, deleted things to allow for more space, then suddenly is full??? Any suggestions?

in QA11 transaction storage location should not be grayed out.
Please check your authorization using SU53.
There is no storage location field for Scrap but 'un-restricted use' storage location is defaulted from purchase order, but you should be able to change it manually.

Similar Messages

Usage report and storage profiles

Hi all,
I'm trying to create a usage report i CBM that shows the storage consumption devided in storage policies. I have 2 different storage policies and they are both visible when editing infrastucture cost.
When generation a cost report I can see the storage policies, but not when I'm generating the Usage Report - wich is the one I really need. I only get the storage usage - and cant differ between the storage policies.
Any ideas?
I'm running CBM 2.6.
Thanks!

Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi

HT4847 My Ipad says that i am running out of storage but my icloud says that ive only used 1.4gb of the 5 allotted and when i go to usage manage storage all my apps are turned t the on postpition for backup. So i dont nderstand why my ipads storage is bei

My Ipad says that i am running out of storage but my icloud says that ive only used 1.4gb of the 5 allotted and when i go to usage manage storage all my apps are turned t the on postpition for backup. So i dont nderstand why my ipads storage is being used

iCloud doesn't give you more storage on your device, it only gives you more storage in iCloud to sync data, store your backups, etc. If you're running out of space on your iPad you'll have to delete some data off your iPad to free it up, such as syncing some of your music or other media off your iPad.
You can check how much free space is available on your iPad by going to Settings>General>Usage and looking at the Available number at the top.

TS3992 My iphone will not back up with iCloud. it keeps popping up a push notification telling me that i do not have enough storage available for the back up. but in my settings and storage it tells me i have 2.8 GB of 5 GB free space, help!?

My iphone 4s will not back up with iCloud. it tells me i dont have enough iCloud storage available, that i can manage my storage in my settings, when i click the settings it tells me i have 2.8 GB free space out of 5 GB. i dont know what to do about this problem. it hasnt been backed up in 3 weeks. and if i still have icloud space avaliable on my phone i do not need to purchase more. i have very few aps backed up on my icloud. i do not understand this help me please

Go to Settings>General>Usage and see how much space is available on your phone (listed at the very top). The pop-up might be telling you that you don't have enough space on your phone to perform the backup, not that you don't have enough space in your iCloud acount to store the backup.

I lost 3 GB storage capacity of my iPad mini2,the system says I have used 10.1 GB, I count it by myself, the actual usages of storage is 6.4 GB, I know the system it self count some space,I hate the iOS 7.1,I didn't encounter this kind of problem in ios6

I lost 3 GB storage capacity of my iPad mini2,the system says I have used 10.1 GB, I count it by myself, the actual usages of storage is 6.4 GB, I know the system it self count some space,I hate the iOS 7.1,I didn't encounter this kind of problem in ios6

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

Date Wise and Storage Location Wise Stock Qty & Value Report......

Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
Yusuf

Hi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK

How can we find the most usage and lowest usage of table in Sql Server by T-SQL

how can we find the most usage and lowest usage of table in Sql Server by T-SQL
The table has time stamp column
StartedOn datetime
EndedOn datetime

The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
SELECT
FROM
databasename,
duration
fn_trace_gettable('F:\Program
Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
default)
WHERE
DATABASENAME='ZTCFUTURE'
AND TEXTDATA
IS
NOT
NULL
--AND TEXTDATA LIKE 'SERVICE%'
order
by cpu
desc;

No data in Usage and Standby?

Hi,
I have recently exchanged my white 16GB iphone at the local retail store, but have just noticed that since I exchanged it there does not seem to be any Usage figures in the general settings.
By that I mean the "usage" and "standby" are blank, above the message "usage times will be shown after iphone is fully charged".
To try and correct it, I reset the phone yesterday and it was on charge from 10pm last night to 7am this morning so I would have thought would be fully charged. (the battery meter appears to be fully charged)
Is anyone else experiencing this problem or has any advice on how to correct it?
Thanks for your help.

When adding/creating an email account, the following presets are available.
Exchange
MobileMe
Gmail
Yahoo Mail
AOL
If you selected the Yahoo Mail account preset when adding/creating the account, the account was created as an IMAP account with Push access available for received messages along with an option to enable or disable Push access for the account.
The data required to connect with the incoming mail server for an email account to check the incoming mail server for new messages is minute. More battery will be used the more often an account is checked for new messages, but this alone is not a significant battery drain and especially with a single email account. All server stored mailboxes with an IMAP account are not synchronized with the server when the account is checked for new messages. For example, the account's server stored Sent mailbox is not synchronized with the server until the account's Sent mailbox is selected.
Push is not a constant fetch process. With an account that supports Push access for received messages, a new message received at the incoming mail server is "pushed" to the iPhone without the account having to be checked for new messages. In theory, Push access should use less battery compared to automatically checking the account for new messages, which isn't always the case and this also depends on the time interval set for automatically checking for new messages. You can have the account automatically checked for new messages every hour.
Depending on how much data is accessed compared to the number and length of phone calls when roaming internationally, data access can be much more expensive.

Iphone 4 battery life draining battery usage and standby has (-) sign

I know there are forums with the same question, however, I need to know what to do if the restore as new doesn't work as well as trying to turn off the notifications. My battery life was fine until I up graded to iOS5.0.1.
I've also done a hard reboot tried to run the battery down and recharge to 100%. Nothing seems to work. I'm getting a usage and battery standby time of ( - ), no figures at all.
With only 2 short calls and a couple of minutes of internet usage my phone has gone from 100% at 7h this morning to 70% at 11h36. I've only noticed the battery drain over the last few days. The only changes were a couple of upgrades on the apps and even deleting those aren't working. I've also tried to delete my email accounts. I've reinstalled the email settings not with exchange but through gmail. My notifications are at a minimum and iCloud is switched off, the only thing that it is backing are my contacts.
Help! I travel far to get to work and need a reliable phone. I'm not sure whether to hold out for a new update on the software or take it to the genius bar.
Any help would be appreciated.

This seems to mainly affect the 4S however if you search the forum (hardware and using iPhone ) you will find many solutions that have either solved or dramatically improved the situation
My 4 did playup with 5.0.1 up but picking a selection of the solutions has returned mine to normal
Location Services to name but one

Data usage and battery drain has skyrocketed with iOS 8.1.2 (maybe earlier)

3 weeks ago my wife got a text message on her iPhone 5 from AT&T that she had used 90% of her data for the month. 30 seconds later, she got another one saying that she had used 100%. Granted, her data plan is small, 200 MB. But, for the last two years she has used as little as 17 MB in a month and her largest prior to this latest month was 49 mb. This month she got to 380 mb before we were able to shut off her cell data. Otherwise, a second chunk of 200 MB and another $15 would have been added to the month.
We had noticed that her battery had been draining rather rapidly in standby mode with no background apps running when she didn't have access to WiFi. We have now correlated the two results, High Cell data usage, Quick battery drain and very warm phone. In case anyone is wondering about her iPhone 5 being one in the recall, it is. I took it in and had it tested. Apple says the battery is fine. It does hold a charge well. When all network communications are shut down on her phone and it is in standby mode, there is no noticeable loss of charge in 24 hours (our longest test).
Since I have a grandfathered Unlimited Data Plan with AT&T, I have been doing some testing on my iPhone 5s. Sure enough, I've seen similar results. With nearly everything turned off except Cell Data, I've seen 483 MB used in 24 hours. Of that total, 479 MB was used for Documents & Sync. I even have everything turned off in my iCloud account, Location services are turned off, no push notifications etc...
The best I can figure, this has been a problem since we installed 8.1.2 and yesterday I installed 8.1.3 resulting in no positive effect on this issue.
At this rate of data usage and no access to WiFi, my wife would have to have a 15 Gb data plan to keep from exceeding her limit. I don't think AT&T even offers one that big anymore. I might have to switch to Sprint or T-Mobile if this doesn't get resolved.
Any ideas would be greatly appreciated. Thanks in advance for your shared insights.

Hey this is Brian, bjmcmurry, under a different user ID. If I logged in as bmcmurry, original post, I was just getting a server error and couldn't get to this discussion nor post a comment anywhere.
Anyway, let me be as brief as I can. After an extensive analysis of replicating the problem on another phone to eliminate it being a hardware specific issue and that the test phone has an unlimited data plan, I was able to stop the excessive data usage and consequential battery drain. I believe I have a reasonable explanation of the problem, an iOS logic bug.
I had everything under my control clamped down on the test phone to minimize data usage. Also, I was forcing all data usage to use the cell towers. I determined that I was burning at least 11 to 13 Mb per hour doing nothing important. I literally had everything turned off except 'Settings' was allowed to use Cell data providing a avenue to log into the Apple ID.
The two phones had 2 things in common, they were using the same Apple ID and the same version of the OS. One was a iPhone 5 and the other was a 5s.
Here is a synopsis of my experience via my written evaluation of the Apple support system (Apple Rep name's have been removed):
After a couple of hours on the phone with an Apple Care Senior support Analyst, it was suggested that I go to the Apple Store to 1) get my battery replace in the iPhone 5 since it qualified for the replacement program and 2) see if the Genius could provide me with any insight in the data usage issue and battery drain.
I'm certainly glad I had multiple reasons to visit the closest Apple store, a 45 min drive. I got the battery replaced, thanks for that.
Regarding the important issue to me that brought me to the Genius Bar, excessive Cell data usage, I thought the Genius did a wonderful job listening and documenting the problem we were experiencing. Unfortunately, educating us on the use of the product or replacing our phone was not going to solve the problem. He eventually figured it out, this was not a user error or broken hardware. We surmised that the reason I was sent to him was to verify and document that there was a problem. I clearly had a problem. After writing copious notes on the issue, The Genius smartly referred me back the the AppleCare Senior Advisor. So, back to AppleCare Senior Analyst I went. She, knowing this was not a simple problem to solve i.e. beyond her level of expertise, got an Apple Software engineer involved.
My primary frustration is that this should have been escalated to software engineering right away. My trip to see the Genius was, I believe, a waste of time for both me and Apple regarding this issue. Diagnosis of this type of problem is well beyond the Genius’ knowledge and job. The Genius did a very good job doing what he could within the scope of his job. He just couldn’t solve this problem and had no one within Apple to which he had access for help.
However, that initial consult with the engineer was a bit feeble. Not only could I not talk to him/her directly, his/her focus was still working with the ‘Black Box' approach. Having Analyst ask me to do stuff like restore the Phone was more like trying to find a 'work around' than 'identifying the real problem.' Maybe restoring the phone was going to fix some corrupted data on the phone sidesteping the real problem, the handling of this condition. The engineer did listen to the fact that I had restored the test phone, the 5s, and only added the use of my Apple ID. Duh, been there!!!
Having been an previous owner of a software development company that I started in 1980 and retired in 2001, I can tell you that using the 'Black Box' method of debugging is extremely inefficient. Instead, having access to an ‘Activity Manager’ type app to identify in real time what process was blowing up the data flow would have saved me a lost afternoon at the Apple store and hours on the phone with tech support.
Ironically, I may have stumbled onto a "work around" solution short of turning off Cell Data that stopped the excessive Cell Data usage and consequential battery drain. Just prior to leaving the Apple Store, I used one of their Macs to log in my Apple ID on the id.apple.com website to ‘Manage my Apple ID’, I was forced to upgrade the security level of my password. Afterward, my cell data usage seemed to drop dramatically.
I told the AppleCare Senior Analyst that I may have stumbled onto a workaround and I suggested that I give it a couple of days of monitoring. We'd talk then and I would have results to report. She agreed.
Sure enough, my Document & Sync usage was back to normal, about 1/2 Mb per day. Am I happy that the excessive Cell Data usage has stopped? You bet! But, there was no intuitive reason that an end user would know to log in on the ID website to unknowingly solve this problem. As I use to say to my employees, that is not the ‘Macintosh Way.’ And, rebooting the the 'Microsoft Way.'
When I reported my findings to the Analyst, we both concluded that data usage was back to normal. She did report to me that the engineer did provide a laundry list of suggested activities to help solve the problem. Remarkably, they were everything that I had already done and were pretty much what the Analyst and the Genius tried to do. All reasonable tasks. But clearly, the engineer hadn't even ready the notes on the case before responding. And, none of the things suggested would have uncovered the real problem, likely a logic bug in iOS.
My advice now is to have the software engineering team rule out that there was an unresolvable state that a background process was fiercely trying to handle. The iOS does not seem to know how to intervene and prompt the user with a requirement to upgrade their password. If this does end up being the case, I would call it a logic bug, a perpetual exception that is not being handled properly.
Anyway, I hope this helps you.

Problem with memory usage and CPU usage

Hello,
i have a problem with the memory usage and cpu usage in my project!
My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage!
It starts with ~15% CPU usage and ~70 MBytes memory usage. After ~ 24hrs the CPU usage is ~60% and the memory usage is ~170 MBytes!
After 3 days the CPU usage is almost about 70% and the memory usage is about 360 MBytes!
What can I do to reduce this huge recource usage?
Thank you!

Hi Pahe,
   I think the issue is memory usage, since CPU usage can increase due to greater memory requirements.
   Anyway, it's difficult to debug without seeing your code, can you post it (possibly for LV 7.1 compatibility)? Or just post a JPEG of the piece of code that can give problems...
   I guess you're appending data to an array instead of replace data elements, but I can't be sure...
   Have a nice day!
graziano

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

Questions on photos and storage

I have a few questions about photos and storage... If you can just answer one of these, that's fine and thanks for the help!
How do I see how much space my iPhoto photos are taking on my hardrive?
I have Time machine which backs up, but concerned that I'm getting too many pictures. When I do "Get Info" on the hardrive it says 640GB Capacity with 254GB used. I'm assuming that includes all my photos, and that Time machine only backs up and is not the active storage for those photos?
What is advisable for available GB space on this size computer?
I have my photos on the hardrive and the time machine, is it also advised to have in a cloud-based storage system to be safe? Or some other place. Just checking what others do with this.

1 - it is a really good idea to start new threads with new questions - threadjacking a year old solved thread on a totally different subject will not provide the best coverage and the best answers
2 - Do NOT uncheck the option to copy imported items to the iPhoto library - it is a really, really bad idea that will create many problems for yo and has no advantages of any sort - see the user tip on file management in iPhoto for more details - iPhoto and File Management
3 - take the time to learn how to use iPhoto and the concept of using a database for management photos rather than a file based system like you are used to - it is much different and much more powerful - but there is a learning curve and a different thought process
4 - yes you can always export anything or everything from iPhoto for use on any other system - see the user tip on exporting for details - Exporting From iPhoto
5 - always remember that you never access your photos directly - iPhoto totally replaces the finder for managing your photos - see the user tip on accessing photos for more details - How to Access Files in iPhoto
LN

After upgrading to 8.1 Pro from 8.0 Pro, my Storage Spaces and Storage Pool are all gone.

Under 8.0 I had three 4-terabyte drives set up as a Storage Pool in Storage Spaces. I had five storage-space drives using this pool I had
been using them for months with no problems. After upgrading to 8.1 ( which gave no errors ) the drives no longer exist. Going into "Storage Spaces" in the control panel, I do not see my existing storage pool or storage drives. I'm prompted
to create a new Pool and Storage Spaces. If I click the "Create Pool" it does not list the three drives I used previously as available to add.
Device Manager shows all three drives as present and OK.
Disk Management shows Disks 0,1,2,6. The gap in between 2 and 6 is where the 3,4,5 storage spaces drives were.
Nothing helpful in the event log or the services.
I've downloaded the ReclaiMe Storage Spaces recovery tool and it sees all of my logical drives with a "good" prognosis for recovery. I've not gone down that road yet though because it requires separate physical drives to copy everything to
and they want $299 for the privilege.
Does anyone have any ideas? I'm thinking of doing a fresh 8.1 install to another drive to see if it can see it or reinstalling 8.1 to the existing drive in the hope that it will just suddenly work. Or possibly going back to 8.0.
Thanks for your help!
Steve

Hi,
“For parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and
restore your data.”
I’d like to share the following article with you for reference:
Storage Spaces Frequently Asked Questions
(Pay attention to this part:How do I prepare Storage Spaces for upgrading from the Windows 8 Consumer Preview to Windows 8 Release Preview?)
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_prepare_Storage_Spaces_for_upgrading_from_the_Windows_8_Consumer_Preview_to_Windows_8_Release_Preview
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Sales order stock and storage location stock on past date with value

Hi everyone.
I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.

can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value

Usage and storage

Similar Messages

Maybe you are looking for