Usage 'Call Time' Question

I recently had to take my iPhone back to the Apple Store due to several problems I was experiencing. They replaced it without any problems and put my old sim card back into the new handset, but upon re-syncing it to my iTunes it re-activated not just the once, but three times. Every time I re-docked the iPhone it went though the re-activation process each time. I decided to do a restore. This solved the problem but I also lost the call time status in the usage menu. I didn't think this would completely reset the stats, I thought it was sim card specific. Can anyone assist?
Also, one last question about the usage. When my carrier (02-UK) renews my minutes at the start of the new month, will the call time on the usage menu reset back to zero so I know how many minutes I have used in that month? Thanks.

I believe that the rollover minutes that are lost due to expiration and new ones are contained in the new billing.
If your bill cycle ended on the 16th of August, it should have shown in your account on-line unless it was not a full month, i.e., you bought the phone on 1 August, your billing cycle was determined to be the 16th of the month, not a full month.
I had a similar question a few years back when Cingular had rollover and they bought AT&T mobile. Now that AT&T bought Cingular, I would think that the same rules apply but who knows.
mikeab

Similar Messages

How to access phone call timer iphone 4

does the iphone 4 have call timers for phone calls anf if so how are they accessed

With the Phone app, select Recents.
Select the right facing arrow in a blue circle icon to the right of a call to view the call time.
For total call time, Settings > General > Usage > Cellular Usage > Call Time. There is a Current Period and Lifetime. You can reset the Current Period time for calls and data.

Does restoring the iPhone reset the call time usage?

Mine seems to have done, and now I find it hard to know how much time I have used. One other thing, will this automatically reset at the start of a new contract month when your minutes gets renewed? Thanks

Wasn't the question "does restoring the iPhone reset the call time usage?"

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Equium M50-164: Question about Fan usage & battery timer

Hi !!
Just got hold of my equium m50-164 laptop today and I wanted to clarify a few issues
firstly,
I flashed my bios with the latest version and upon the reboot the fan kicked in at full power and didn't turn off until i put the laptop into standby mode, this seemed to of rectified the problem but the fan seems to be kicking in a lot more than compared to before, luckily the fan isn't kicking into 100% speed but more like 15% - 20% every 30 secs or a minute then goes into silent mode, the fan hasn't hit 100% unless i do a reboot :),
I know the fan will speed faster based on the cpu usage etc (thermal) but is this normal? I spoke to support and they wanted me to have an instant replacement but I said I would wait a few days to see if it would calm down :)
and finally looking at the power meter and other software tools there seems to be no battery calibration, with previous laptops i noticed that numerical calculations are made based on battery usage and time left [i.e a timer] but with this laptop i kind find a timer - i would of thought tha every laptop has this facility nowadays !
any advice would be helpful
cheers
Ephid0r UK

Hi
Please dont be mad on me but I really dont understood why your first step is BIOS update. The unit is delivered with actual BIOS and it is really not necessary to make it before you notice some problems. I just hope that you have enough experience with it because I have read a few postings on this forum about BIOS damage while BIOS update and to make it good again costs a lot of money.
Your BIOS is updated and there are new values that should be used by Power saver utility (responsible for cooling fan monitoring). I recommend you to remove preinstalled power saver, restart the unit and install it again. I hope that the result will be better.
Battery calibration I dont know what you want exactly but the battery usage can be control by power saver tool. On the task bar there is symbol for power saver and if you move the mouse pointer on it the battery capacity and left time will be shown.

Call time and lifetime call question

Hi all,
I have just purchased a new Iphone 4, i noticed after 1 week that the call time is 3hr 18mins and the lifetime call timer is also 3hr 18mins. I have only used about 1hr of call time (both inward and outward calls) so why is this saying 3hr + when it should be about 1hr ?? is "data" time included in this ?? my wife got n iphone the same day and hers is on 1hr 7mins and she has used hers more than mine.
Cheers Bill.

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Call Time: Current Period = Lifetime

I can not figure out why my call times are equal...and the numbers make absolutely no sense whatsover...I bought my iPhone on iDay and have only done a full restore but once back in Sept...am I right to assume that when I did the restore, I wiped out the lifetime stats?...ok, assuming this is an accurate, then I should at least have lifetime stats that reflect since mid Sept which amounts to about 40 days...yet it shows the following for both current and lifetime call time:
*5 Days 17 hours !!!!!!!*
I have searched the discussion board for an explanation of what might be causing this but nothing jumped out at me...I saw a lot of responses to the standby and usage time but this isn't my issue...do I have a iPhone replacement issue...I've already done a restart and while that affected the standby/usage stats, the current period/lifetime stats remained unchanged...please, does anyone have an answer for this?...any help is greatly appreciated !

Hmmm, so since the restore, I've been on the phone 5 days and 17 hrs...ahhh, and since I've never done a reset, that's why they are equal...that clears it up for me...wow, thanks !
I do have 1 addt'l question, if I may, when I do a reset, will that wipe out both my lifetime and current periods?...or will only the current period reset to zero while the lifetime is maintained for history purposes?
Thanks for taking the time to enlighten me...I sure do appreciate it

Is the "Call Time Current Period" is the minutes that I used from my plan?

Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
Thanks in advance for clarifying my questions!

blue sky wrote:
Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
Yes
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
No. The current period is just the time since it was last manually reset.
Thanks in advance for clarifying my questions!
No problem

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
Using ALV, we can have three types of reports:
 1. Simple Report
 2. Block Report
 3. Hierarchical Sequential Report
Reward useful points
Siva

Abap-hr real time questions

hi friends
kindly send me ABAP-HR REAL TIME QUESTION to my mail [email protected]
Thanks&Regards
babasish

Hi
Logical database
A logical database is a special ABAP/4 program which combines the contents of certain database tables. Using logical databases facilitates the process of reading database tables.
HR Logical Database is PNP
Main Functions of the logical database PNP:
Standard Selection screen
Data Retrieval
Authorization check
To use logical database PNP in your program, specify in your program attributes.
Standard Selection Screen
Date selection
Date selection delimits the time period for which data is evaluated. GET PERNR retrieves all records of the relevant infotypes from the database. When you enter a date selection period, the PROVIDE loop retrieves the infotype records whose validity period overlaps with at least one day of this period.
Person selection
Person selection is the 'true' selection of choosing a group of employees for whom the report is to run.
Sorting Data
· The standard sort sequence lists personnel numbers in ascending order.
· SORT function allows you to sort the report data otherwise. All the sorting fields are from infotype 0001.
Report Class
· You can suppress input fields which are not used on the selection screen by assigning a report class to your program.
· If SAP standard delivered report classes do not satisfy your requirements, you can create your own report class through the IMG.
Data Retrieval from LDB
1. Create data structures for infotypes.
    INFOTYPES: 0001, "ORG ASSIGNMENT
                        0002, "PERSONAL DATA
                        0008. "BASIC PAY
2. Fill data structures with the infotype records.
    Start-of-selection.
         GET PERNR.
    End-0f-selection.
    Read Master Data
Infotype structures (after GET PERNR) are internal tables loaded with data.
The infotype records (selected within the period) are processed sequentially by the PROVIDE - ENDPROVIDE loop.
          GET PERNR.
             PROVIDE * FROM Pnnnn BETWEEN PN/BEGDA AND PN/ENDDA
                    If Pnnnn-XXXX = ' '. write:/ Pnnnn-XXXX. endif.
             ENDPROVIDE.
Period-Related Data
All infotype records are time stamped.
IT0006 (Address infotype)
01/01/1990   12/31/9999 present
          Which record to be read depends on the date selection period specified on the
          selection screen. PN/BEGDA PN/ENDDA.
Current Data
IT0006 Address - 01/01/1990 12/31/9999   present
RP-PROVIDE-FROM-LAST retrieves the record which is valid in the data selection period.
For example, pn/begda = '19990931'    pn/endda = '99991231'
IT0006 subtype 1 is resident address
RP-PROVIDE-FROM-LAST P0006 1 PN/BEGDA PN/ENDDA.
Process Infotypes
RMAC Modules - RMAC module as referred to Macro, is a special construct of ABAP/4 codes. Normally, the program code of these modules is stored in table 'TRMAC'. The table key combines the program code under a given name. It can also be defined in programs.The RMAC defined in the TRMAC can be used in all Reports. When an RMAC is changed, the report has to be regenerated manually to reflect the change.
Reading Infotypes - by using RMAC (macro) RP-READ-INFOTYPE
          REPORT ZHR00001.
          INFOTYPE: 0002.
          PARAMETERS: PERNR LIKE P0002-PERNR.
          RP-READ-INFOTYPE PERNR 0002 P0002 .
          PROVIDE * FROM P0002
              if ... then ...endif.
          ENDPROVIDE.
Changing Infotypes - by using RMAC (macro) RP-READ-INFOTYPE.
· Three steps are involved in changing infotypes:
1. Select the infotype records to be changed;
2. Make the required changes and store the records in an alternative table;
3. Save this table to the database;
The RP-UPDATE macro updates the database. The parameters of this macro are the OLD internal table containing the unchanged records and the NEW internal table containing the changed records. You cannot create or delete data. Only modification is possible.
INFOTYPES: Pnnnn NAME OLD,
Pnnnn NAME NEW.
GET PERNR.
    PROVIDE * FROM OLD
           WHERE .... = ... "Change old record
           *Save old record in alternate table
           NEW = OLD.
    ENDPROVIDE.
    RP-UPDATE OLD NEW. "Update changed record
Infotype with repeat structures
· How to identify repeat structures.
a. On infotype entry screen, data is entered in table form.
    IT0005, IT0008, IT0041, etc.
b. In the infotype structure, fields are grouped by the same name followed by sequence number.
    P0005-UARnn P0005-UANnn P0005-UBEnn
    P0005-UENnn P0005-UABnn
Repeat Structures
· Data is entered on the infotype screen in table format but stored on the database in a linear
structure.
· Each row of the table is stored in the same record on the database.
· When evaluating a repeat structure, you must define the starting point, the increment and the
work area which contains the complete field group definition.
Repeat Structures Evaluation (I)
· To evaluate the repeat structures
   a. Define work area.
       The work area is a field string. Its structure is identical to that of the field group.
   b. Use a DO LOOP to divide the repeat structure into segments and make it available for
       processing in the work area, one field group (block) at a time.
Repeat Structures Evaluation(II)
Define work area
DATA: BEGIN OF VACATION,
              UAR LIKE P0005-UAR01, "Leave type
              UAN LIKE P0005-UAN01, "Leave entitlement
              UBE LIKE P0005-UBE01, "Start date
              UEN LIKE P0005-UEN01, "End date
              UAB LIKE P0005-UAB01, "Leave accounted
           END OF VACATION.
GET PERNR.
     RP-PROVIDE-FROM-LAST P0005 SPACE PN/BEGDA PN/ENDDA.
     DO 6 TIMES VARYING VACATION
             FROM P0005-UAR01 "Starting point
                 NEXT P0005-UAR02. "Increment
             If p0005-xyz then ... endif.
      ENDDO.
Processing 'Time Data'.
· Dependence of time data on validity period
· Importing time data
· Processing time data using internal tables
Time Data and Validity Period
· Time data always applies to a specific validity period.
· The validity periods of different types of time data are not always the same as the date selection period specified in the selection screen.
Date selection period |----
|
Leave |----
|
· PROVIDE in this case is therefore not used for time infotypes.
Importing Time Data
· GET PERNR reads all time infotypes from the lowest to highest system data, not only those within the date selection period.
· To prevent memory overload, add MODE N to the infotype declaration. This prevents the logical database from importing all data into infotype tables at GET PERNR.
· Use macro RP-READ-ALL-TIME-ITY to fill infotype table.
INFOTYPES: 2001 MODE N.
GET PERNR.
    RP-READ-ALL-TIME-ITY PN/BEGDA PN/ENDDA.
    LOOP AT P0021.
         If P0021-XYZ = ' '. A=B. Endif.
    ENDLOOP.
Processing Time Data
· Once data is imported into infotype tables, you can use an internal table to process the interested data.
DATA: BEGIN OF ITAB OCCURS 0,
              BUKRS LIKE P0001-BUKRS, "COMPANY
              WERKS LIKE P0001-WERKS, "PERSONNEL AREA
              AWART LIKE P2001-AWART, "ABS./ATTEND. TYPE
              ASWTG LIKE P2001-ASWTG, "ABS./ATTEND. DAYS
           END OF ITAB.
GET PERNR.
RP-PROVIDE-FROM-LAST P0001 SAPCE PN/BEGDA PN/ENDDA.
CLEAR ITAB.
ITAB-BUKRS = P0001-BURKS. ITAB-WERKS = P0001-WERKS.
RP-READ-ALL-TIME-ITY PN/BEGDA PN/ENDDA.
LOOP AT P2001.
      ITAB-AWART = P2001-AWART. ITAB-ASWTG = P2001-ASWTG.
      COLLECT ITAB. (OR: APPEND ITAB.)
ENDLOOP.
Database Tables in HR
· Personnel Administration (PA) - master and time data infotype tables (transparent tables).
   PAnnnn: e.g. PA0001 for infotype 0001
· Personnel Development (PD) - Org Unit, Job, Position, etc. (transparent tables).
   HRPnnnn: e.g. HRP1000 for infotype 1000
· Time/Travel expense/Payroll/Applicant Tracking data/HR work areas/Documents (cluster
   PCLn: e.g. PCL2 for time/payroll results.
Cluster Table
· Cluster tables combine the data from several tables with identical (or almost identical) keys
into one physical record on the database.
. Data is written to a database in compressed form.
· Retrieval of data is very fast if the primary key is known.
· Cluster tables are defined in the data dictionary as transparent tables.
· External programs can NOT interpret the data in a cluster table.
· Special language elements EXPORT TO DATABASE, IMPORT TO DATABASE and DELETE
FROM DATABASE are used to process data in the cluster tables.
PCL1 - Database for HR work area;
PCL2 - Accounting Results (time, travel expense and payroll);
PCL3 - Applicant tracking data;
PCL4 - Documents, Payroll year-end Tax data
Database Tables PCLn
· PCLn database tables are divided into subareas known as data clusters.
· Data Clusters are identified by a two-character code. e.g RU for US payroll result, B2 for
time evaluation result...
· Each HR subarea has its own cluster.
· Each subarea has its own key.
Database Table PCL1
· The database table PCL1 contains the following data areas:
B1 time events/PDC
G1 group incentive wages
L1 individual incentive wages
PC personal calendar
TE travel expenses/payroll results
TS travel expenses/master data
TX infotype texts
ZI PDC interface -> cost account
Database Table PCL2
· The database table PCL2 contains the following data areas:
B2 time accounting results
CD cluster directory of the CD manager
PS generated schemas
PT texts for generated schemas
RX payroll accounting results/international
Rn payroll accounting results/country-specific ( n = HR country indicator )
ZL personal work schedule
Database Table PCL3
· The database table PCL3 contains the following data areas:
AP action log / time schedule
TY texts for applicant data infotypes
Data Management of PCLn
· The ABAP commands IMPORT and EXPORT are used for management of read/write to
database tables PCLn.
· A unique key has to be used when reading data from or writing data to the PCLn.
Field Name KEY Length Text
MANDT X 3 Client
RELID X 2 Relation ID (RU,B2..)
SRTFD X 40 Work Area Key
SRTF2 X 4 Sort key for dup. key
Cluster Definition
· The data definition of a work area for PCLn is specified in separate programs which comply
   with fixed naming conventions.
· They are defined as INCLUDE programs (RPCnxxy0). The following naming convention applies:
   n = 1 or 2 (PCL1 or PCL2)
   xx = Relation ID (e.g. RX)
   y = 0 for international clusters or country indicator (T500L) for different country cluster
Exporting Data (I)
· The EXPORT command causes one or more 'xy' KEY data objects to be written to cluster xy.
· The cluster definition is integrated with the INCLUDE statement.
REPORT ZHREXPRT.
TABLES: PCLn.
INCLUDE: RPCnxxy0. "Cluster definition
Fill cluster KEY
xy-key-field = .
Fill data object
Export record
EXPORT TABLE1 TO DATABASE PCLn(xy) ID xy-KEY.
   IF SY-SUBRC EQ 0.
       WRITE: / 'Update successful'.
   ENDIF.
Exporting Data (II)
. Export data using macro RP-EXP-Cn-xy.
· When data records are exported using macro, they are not written to the database but to a
main memory buffer.
· To save data, use the PREPARE_UPDATE routine with the USING parameter 'V'.
REPORT ZHREXPRT.
*Buffer definition
INCLUDE RPPPXD00. INCLUDE RPPPXM00. "Buffer management
DATA: BEGIN OF COMMON PART 'BUFFER'.
INCLUDE RPPPXD10.
DATA: END OF COMMON PART 'BUFFER'.
RP-EXP-Cn-xy.
IF SY-SUBRC EQ 0.
    PERFORM PREPARE_UPDATE USING 'V'..
ENDIF.
Importing Data (I)
· The IMPORT command causes data objects with the specified key values to be read from
   PCLn.
· If the import is successful, SY-SUBRC is 0; if not, it is 4.
REPORT RPIMPORT.
TABLES: PCLn.
INCLUDE RPCnxxy0. "Cluster definition
Fill cluster Key
Import record
IMPORT TABLE1 FROM DATABASE PCLn(xy) ID xy-KEY.
   IF SY-SUBRC EQ 0.
Display data object
   ENDIF.
Importing data (II)
· Import data using macro RP-IMP-Cn-xy.
· Check return code SY-SUBRC. If 0, it is successful. If 4, error.
· Need include buffer management routines RPPPXM00
REPORT RPIMPORT.
*Buffer definition
INCLUDE RPPPXD00.
DATA: BEGIN OF COMMON PART 'BUFFER'.
INCLUDE RPPPXD10.
DATA: END OF COMMON PART 'BUFFER'.
*import data to buffer
RP-IMP-Cn-xy.
*Buffer management routines
INCLUDE RPPPXM00.
Cluster Authorization
· Simple EXPORT/IMPORT statement does not check for cluster authorization.
· Use EXPORT/IMPORT via buffer, the buffer management routines check for cluster
authorization.
Payroll Results (I)
· Payroll results are stored in cluster Rn of PCL2 as field string and internal tables.
n - country identifier.
· Standard reports read the results from cluster Rn. Report RPCLSTRn lists all payroll results;
report RPCEDTn0 lists the results on a payroll form.
Payroll Results (II)
· The cluster definition of payroll results is stored in two INLCUDE reports:
include: rpc2rx09. "Definition Cluster Ru (I)
include: rpc2ruu0. "Definition Cluster Ru (II)
The first INCLUDE defines the country-independent part; The second INCLUDE defines the country-specific part (US).
· The cluster key is stored in the field string RX-KEY.
Payroll Results (III)
· All the field string and internal tables stored in PCL2 are defined in the ABAP/4 dictionary. This
allows you to use the same structures in different definitions and nonetheless maintain data
consistency.
· The structures for cluster definition comply with the name convention PCnnn. Unfortunately,
   'nnn' can be any set of alphanumeric characters.
*Key definition
DATA: BEGIN OF RX-KEY.
     INCLUDE STRUCTURE PC200.
DATA: END OF RX-KEY.
*Payroll directory
DATA: BEGIN OF RGDIR OCCURS 100.
     INCLUDE STRUCTURE PC261.
DATA: END OF RGDIR.
Payroll Cluster Directory
· To read payroll results, you need two keys: pernr and seqno
. You can get SEQNO by importing the cluster directory (CD) first.
REPORT ZHRIMPRT.
TABLES: PERNR, PCL1, PCL2.
INLCUDE: rpc2cd09. "definition cluster CD
PARAMETERS: PERSON LIKE PERNR-PERNR.
RP-INIT-BUFFER.
*Import cluster Directory
   CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
   CHECK SY-SUBRC = 0.
LOOP AT RGDIR.
   RX-KEY-PERNR = PERSON.
   UNPACK RGDIR-SEQNR TO RX-KEY-SEQNO.
   *Import data from PCL2
   RP-IMP-C2-RU.
   INLCUDE: RPPPXM00. "PCL1/PCL2 BUFFER HANDLING
Function Module (I)
CD_EVALUATION_PERIODS
· After importing the payroll directory, which record to read is up to the programmer.
· Each payroll result has a status.
'P' - previous result
'A' - current (actual) result
'O' - old result
· Function module CD_EVALUATION_PERIODS will restore the payroll result status for a period
   when that payroll is initially run. It also will select all the relevant periods to be evaluated.
Function Module (II)
CD_EVALUATION_PERIODS
call function 'CD_EVALUATION_PERIODS'
     exporting
          bonus_date = ref_periods-bondt
          inper_modif = pn-permo
          inper = ref_periods-inper
          pay_type = ref_periods-payty
          pay_ident = ref_periods-payid
     tables
          rgdir = rgdir
          evpdir = evp
          iabkrs = pnpabkrs
     exceptions
          no_record_found = 1.
Authorization Check
   Authorization for Persons
· In the authorization check for persons, the system determines whether the user has the
   authorizations required for the organizational features of the employees selected with
   GET PERNR.
· Employees for which the user has no authorization are skipped and appear in a list at the end
   of the report.
· Authorization object: 'HR: Master data'
Authorization for Data
· In the authorization check for data, the system determines whether the user is authorized to
read the infotypes specified in the report.
· If the authorization for a particular infotype is missing, the evaluation is terminated and an error
message is displayed.
Deactivating the Authorization Check
· In certain reports, it may be useful to deactivate the authorization check in order to improve
performance. (e.g. when running payroll)
· You can store this information in the object 'HR: Reporting'.
these are the main areas they ask q?

Somer real time questions

hi experts,
1. how to call 2 transactions in same BDC program at a time, like 'mk01' and 'va01'.
2. what is the transaction to create barcode.
3. how to debug a smartform.
4. in which table session are stored.
ALSO CAN ANY ONE SEND ME SOME REAL TIME QUESTIONS ASKED IN INTERVIEW
thankx

2a.) SE73 is the transaction to create barcodes..
se73 --> System Barcodes --> create ur new barcode
then go to t-code: SMARTSTYLES there u have to create characterformat for the barcode u have created.
and use this characterformat in smartforms or sapscripts editor ...
3a.) Use breakpoint in program or i think with /h it activates the debugging of smartform or sapscript.
4a.) in table APQI all session records r stored.
reward if it helps

Hello some real time questions

Hello guys,
Can any one help with this question.
1) Difference between Interactive & Drill down
repot? What specific statements do you use, when
writing a drill down report?
(is both are same or any difference is there)
2) What transaction do you use for Data Analysis?
3) When a program is created and need to be
transported to Production, does selection texts
always go with it? if not how do you make sure?
4) Can you make the CTS entries? How do you do it?
5) What are change header / detail tables? Have
you used them? ( i dont know what exactly is this?
and from which topic?)
6) What is currency factoring technique?
7) Is it possible to run host command from SAP
environment? How do you run?
8) What is the difference in using COMMIT WORK
within a called transaction & within a called dialog
module in an existing module?
9) What is the difference between the report
status & screen status?
10) what is the main diff between LSMW & session?
11) How to introduce authorization objects in
reports? How can you give authorization?
12) Diff between BAPI & RFC?
13) How field properties are set with * for
password?
14) How to create our own parameter ID in SE11?
15) What is a Ztable? How to create it?
(i think it is user defined table
and using Domain, Data Element & Table fields we
can create, if so, why it is to be called as only
'z' table, when we can careat with 'y')
SOME REAL TIME QUESTIONS:
1) How many SAP instances are there in your
organization?
2) What SAP version is in use for each instance?
3)What is the Hot package level for each instance?
4)What OS is employed per instance?
5)From where you get the request no?
Any one Answer this question it will be useful for all.
Thanks in advance.

Here are answers to some of your questions. Hopefully this will help you.
1) Difference between Interactive & Drill down
repot? What specific statements do you use, when
writing a drill down report?
(is both are same or any difference is there)
--> It's the same. You have events AT PF-STATUS, AT LINE-SELECTION, AT USER-COMMAND which are used to code for Interactive reports. Check this link for more details
http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
2) What transaction do you use for Data Analysis?
--> What do you exactly mean by data analysis?
3) When a program is created and need to be
transported to Production, does selection texts
always go with it? if not how do you make sure?
--> Yes, it goes with it.
5) What are change header / detail tables? Have
you used them? ( i dont know what exactly is this?
and from which topic?)
--> All changes in SAP data are logged in Change Header and Item table. CDHDR and CDPOS are change header and item tables respectively.
8) What is the difference in using COMMIT WORK
within a called transaction & within a called dialog
module in an existing module?
--> Commit work commits all database changes which occurs before commit statement.
10) what is the main diff between LSMW & session?
--> LSMW and session are 2 different ways to update data in SAP database.
Check this out -
Session Method
LSMW
11) How to introduce authorization objects in
reports? How can you give authorization?
Need to add code for the same using Authority check command. Check this thread
ABAP Development
13) How field properties are set with * for
password?
--> You can modify field properties which displaying data. In this way you can set data to encrypt with 'X'.
14) How to create our own parameter ID in SE11?
-> Check out this thread
ABAP Development
15) What is a Ztable? How to create it?
(i think it is user defined table
and using Domain, Data Element & Table fields we
can create, if so, why it is to be called as only
'z' table, when we can careat with 'y')
--> using transaction code SE11. All custom objects in SAP can start either with Y or with Z.

SAP-XI Real time questions

could you please provide me some real time questions on sap-xi,
thank you

1. What are the Three types of XI Cache? How are they used?
2. Where would you look to find Logical System in the SLD.
ANS Business system wizard
3. What 2 Data Types are automatically created when the Namespace is saved in the Integration Repository?
ANS. ExchangeFaultdata and Exchange log data.
4   Which Development Object in SAP XI forms the "ROOT NODE" of an XML document when an XI message is generated?
ANS MESSAGE TYPE
5. Describe the setting to "Permit Importing of SAP IDOCs or BAPI/ RFCs". Where is this configured?
ANS.
6. What are the valid types of Message Mappings? Which is configured with the Graphical User Interface and requires no coding?
ANS. MESSAGE MAPPING, XSLT MAPPING, ABAP MAPPING AND JAVA MAPPING, MESSAGE MAPPING REQUIRES no coding
7. What actions should you take if your Business System does not show when attempting to "Transfer from the SLD"?
8. What is the relationship between Product, Product Version, Software Component and Software Component Version? Give an example.
ANS. PRODUCT: Represents a collection of all versions of a product . In SAP environment , a product corresponds to an SAP technical Component, eg 4.6c,4.6d,4.7
COMPONENT: Represents a collection of all versions of a software components Examples of Software components are SAP_APPL,SAP_ABA,SAP_HR Software
9. Describe the Design Repository (DR) objects you created to configure a scenario.
10. What are the different design time components used by XI?
11. What monitoring service does the integration server provide?
12. Describe the alert functionality of the runtime workbench.
ANS Message alerting allows to set conditions for triggering Alerts. This allows notification of the correct parties for a specific classes of errors.
13. In BPM, if you have async-sync bridge, does the QOS change?
14. What is logging/ trace? List 4 ways to enable logging/ trace?
15. Properties of an async message?
16   Inbound XI message has problem, where do you look for solution?
17. Describe XI message format.
18. Describe end-to-end monitoring. What is it? How is it configured? What are the different   views?
ANS It is a tool for monitoring end to end technical processes involving multiple components.
to configure end to end monitoring :1. On initial screen of runtime work bench ,select configuration tab page.
2.enter the logon data for the monitoring server.
3.choose display.
4.system displays the components of the correct domain and the integration server is selected as default.
5.select the other components that you want to use and configure them as sender or receiver ,or both depending on the component type.
6.we can select monitorin level that we want to use for each of the selected component.
7.Choose save configuration .
          Processes overview and the instance view are the two different views
19. Different steps to make a Sender IDOC adapter work?
20. JMS adapter can talk with what type of systems? Give some examples...
ANS Messaging systems to the integration engine
21.What format can JDBC adapter communicate in? Should you use native SQL?
ANS. JDBC adapter converts data base content to XML messages and the other way around.
22.If communications with JDBC using XML format, what are 4 actions you could do?
ANS. SELECT, INSER, DELETE , UPDATE.
23. How does PCK and adapter framework engine differ?
ANS.
24. Can JDBC adapter query DB tables? Can it insert?
ANS. Yes
25. JMS adapter scenario messaging system provider needs to submit what?
26. List some properties of receiving IDOC adapter.
27. JDBC/ JMS required certain steps before they can work?
ANS vender specific JMS driver must be deployed on to the J2EE engine using SDM
        Appropriate JDBC driver must be deployed on the system
28. What is ALEAUDIT with respect to IDOCS? When will they use it?
29. Properties of the HTTP adapter, does it use or need a sender or receiver communications channel or agreement?
30. What does a RFC adapter support?
ANS sRFCs and tRFCs
31. Is EOIO supported by RFC?
ANS No
32. What are the advantages of using a decentralized adapter engine?
ANS.
33. What are the different monitoring statuses? Where do you find them?
ANS Different monitoring statuses are Message Monitoring, Component monitoring , performance Analysis and Alerting and we find this in Runtime Workbench.
34. What adapters are not in adapter engine? code you can type in,
ANS HTTP and IDOC adapters are not in adapterengine and we can type code in IDOC
A. Which ABAP proxy, in or outbound has Which one used classes with regards to Sync/ Async what is the method call?
36. With an optional node what would be the cardinality? How do you make sure the subordinate fields get mapped?
37. WSDL what is it? Where do you find it in Repository? Is it used in Java or ABAP proxy?
38. XI 3.0, what are the supported mapping types?
ANS Message mapping, ABAP mapping, JAVA mapping and XSLT mapping
39. What are the prerequisites for importing customer defined IDOC?
ANS
40. What are the three IDOC transactions in XI?
ANS SM59, IDX1and IDX2.
41. Context object replace what?
ANS Xpath
42. Two things can make up a collaboration agreement, what are they?
ANS Sender agreement and receiver agreement
43. What is a logical system, with respect to SLD? Where would you assign it?
ANS
44. What is the sender communications channel?
ANS specify the potential senders of messages and the technical communication path
45. If error during inbound or outbound binding, where do you look to solve?
46. URI, URL and URN what are they and what are their differences?
47. To perform content based (logical) routing, two places it can be done. What are the two places?
48. What is an integration process? Where is it executed? What stake?
49. In a message mapping you have advanced user defined function, can you test for context changes, if yes how?
50. What is multi-mapping? Where is it used? What are the advantages?
ANS Multimappping is any mapping that involves N messages either or source or target side   Multimapping can be used in ccBPM
         1.used to map abstract interfaces
         2. Development is same as message mappings.
         3.n:1 transformation
         4.1:n transformation
         5. n:m transformation
51. What are the two XSLT tags, previously that could not be used in XI?
ANS
52. Using a simple user defined function how can you send trace information to be monitored?
53. What is function "exists" in message mapping?
ANS We can handle the error by checking whet her the source tag exists and if it does not we can pass an empty value, which generates the required target field.
54. What Jar file is required to perform Java Mapping?
ANS
55. What is context in message mapping and how is it used?
56. What is remove context and splitby value?
ANS to remove parent context of an element and spliby value is counterpart of remove context.
57. Where can you use user defined function? What is its scope?
58. If you are building Java mapping class which class interface must it implement?
59. What is the scope of mapping template?
60. How does a Boolean function work in message mappings?
61. Source message occurs 3 times, target only once, what is wrong?
62. In simple mapping - one source results in 4 identical target messages, with regarding cardinality what is the problem?
63. What is a prerequisite to do ABAP mapping for a comple transformation?
64. What step can be inserted into an exception branch?
ANS
65. How do you get an error condition to generated an alert?
ANS
66. What actions can you perform in SXI_CACHE?
67. What is a wait step and why is it used?
ANS It is a process flow control relavent and is used toset start time for next step
68. What is a block step and why is it used?
ANS
69. Could multiple instances of an integration process be running at the same time? If so, how does a message find its way to the correct instance?
70. Which XI objects can be used in an integration process? Which ones from Repository?
71. Send message within an integration process to 8 receivers at the same time, how can you do this?
72. What is a correlation? What is a local correlation?
73. What is the relationship between an integration process and business workflow?

'%Total Call Time ' in AWR report

Hi.
I have a quick question here,
For the awr report, the ‘Top 5 Timed Events’ section, does anybody knows how the ‘%Total Call Time ‘ is calculated for each event listed there?
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time Wait Class
PX Deq Credit: send blkd 5,682,600 3,816 1 39.8 Other
db file scattered read 91,236 1,681 18 17.5 User I/O
CPU time 1,347 14.0
log file sync 99,426 752 8 7.8 Commit
log file parallel write 97,921 523 5 5.4 System I/O
Thanks,
Lei

922884 wrote:
Hi,
Db version is 10.2.0.4.0
What is meaning of waits and % Total Call Time in Top 5 Timed Events in AWR report? Waits is the number of times a session waited on a particular call
% Total Call Time is the total time spent in this event divided by the db time, converted to a percentage.
It gives you some idea of how signifcant this event was in the total time spent waiting by the user. Unfortunately the SQLNet times are excluded in the calculations, so there is a component of time that (from the end-users' perspective) is lost.
How to read AWR report?Where i have to start from it?
The best place to start is probably still the white paper about statspack produced by Oracle 11 years ago: http://www.oracle.com/technetwork/database/focus-areas/performance/statspack-opm4-134117.pdf
How the values are calculated in awr? For example db time is 556.15 and elapsed time is 1,439.73 .
elapsed time is the clock time between the start and end time of the snapshots, reportedin in minutes - in your case your report covers 24 hours which is generally far too long to be useful.
db time is the time your sessions were active "inside" the database - again in minutes - and it's a measure of how much time you spent working. It is the sum of wait time and CPU time.
Regards
Jonathan Lewis

3110 In-call timer

Hi All,
I am sorry if this question had already been asked, my searches revealed that it has not been yet.
I would like to have in-call timer, something which greatly helps me to have the phone bills under control.
Is it possible to have the same as a software update through Nokia? Or is there any java app which allows me to do so?
Currently I found that if I record the conversation, then that counter also acts like a real time in-call timer, however, I cannot record every conversation!
Any help, shall be appreciated greatly.
Thanks and Regards,
Vignesh
Bangalore, India

I think the S40 platform supports call timing, but Nokia has not yet done this, except on some low end phones. According to my knowledge, currently there's no Java application too. The only option you can try is enabling the Stopwatch as an option of the D pad (Navi key) and starting the Stopwatch everytime you are on a call.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

Usage 'Call Time' Question

Similar Messages

Maybe you are looking for