Usage Decision Date
Hi 2 all,
Please tell me that in which table usage decision date is stored?
Regards,
Aisha Ishrat
ICI Pakistan Ltd.
Dear Aisha,
Please look in table QALS and field PAENDTERM,
Hope solved your querry
Njoy
Ashish
Similar Messages
-
Unable to change stock posting date at usage decision while inspecting HUs
If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
Anyone?
Seba
Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AMI solved it in this topic: Changing posting date at usage decision for handle units. How?
-
Need to send data, after Usage decision in quality inspection (QA11)
Hi all,
After Usage decision in quality inspection (QA11), i need to send some data like material number, qty etc to external database or to external party. is there anyway i can achive this in real time? real time means, it should send the appropriate data to external party after usage decision is made.
Thanks
PabiHi,
You can change results recording in case the MIC in the inspection plan of the lot are marked as "long term characteristics", else it wont be possible to change result recording.
you can change the UD code only after giving the Usage decision.
you cannot change the defects recording.
Thanks
SUMIT -
Changing posting date at usage decision for handle units. How?
Does anybody know how to change posting date at usage decision for handle units (HU)?
If the material is not managed by HU, SAP allows this modification (there's a button with a hat on it referring the material document header).
For HU I cannot seem to change posting date!
SebaYes it's possible! Well,...unless for versions 4.6C, 4.7 and ECC 5.
I've found SAP Note #752131 by which SAP declares that you can create the pushbutton from the Screen Painter referring the document header.
That's all,.....so simple, and it works fine!
This note applies ONLY to version 4.6C, 4.7and ECC 5 (which is the version the customer I am with has installed).
Thanks anyway.
Sebas -
QM_Follow up action in usage decision
Dear QM Experts,
1. We can record the defects in inspection lot (01 origin) which creates quality notification in background under F2 type.
2. If the defects are recorded usage decision is given as Rejected.
Requirement is auto email should be sent to predefined email addresses briefing defects and number of defects. This has to be done only for those lots whose UD have been given as Rejected. Question is which follow up action and which function module to be used for this?
Best Regards,
Anand Raohi
kindly check whether the following FM can be used
QFOA_MAIL_REJECTED_RESULTS-Follow-Up Action Module: Send Mail for Rejected Characteristics
QFOA_MAIL_SENDING-Send Info MAIL After Usage Decision (Mail Contains UD Data)
QFOA_MAIL_SENDING_STANDARD-Send a Short Info MAIL After Usage Decision
you have to assign these follow up actions with FM to the rejected UD code
regards
thyagarajan -
PP - QM: Reversal of the usage decision
Hi Gurus,
We have completed Result Recording using QE51N transaction and Usage decision using QA11. It has posted a stock from QI to Unrestricted use. Now I want to take it back from Unrestricted use to QI. This needs reversal of usage decision (What I think).
Can you suggest me the proper way of performing the said transaction?
I will really appreciate your concern.
Thanks
ShivR/3 note no. 175842 14.12.2001 Page 1
Number 0175842
Version 0021 from 29.11.2001
Status Released for customer
Set by SAP AG on 03.12.2001
Language EN
Short text Inspection lot: Reversal of goods movements from UD
Administrator SAP AG
Component QM-IM-UD Inspection Lot Completion
Long text
Symptom
Goods movements, which were created from the transactions of the usage
decision, can no longer be reversed.
Additional key words
QA11, QA12, QA14, MBST, MF41
Inspection lot, usage decision, goods movements, reversal, material
document
Cause and preconditions
Presently, the function is not provided in the standard system.
Solution
The function is not provided in the standard system up to and including
Release 4.6C.
When you do this bear the following in mind:
1. Using the attached program corrections, stock transfer postings can
be reset for the usage decision.If it is possible to post this
document in the stock management, the inspection lot is also
corrected and the Quality Management Information System is if
necessary updated.After the reset has been successfully carried out,
the inspection lot, related to the stocks, has the status before the
first stock credit entry.The usage decision is not reset.If, after
the usage decision, further transfer postings are carried out in the
stock management which lead to the usage decision transfer postings
not being able to be reset due to missing availability, these
postings must be reversed first.
2. The goods movement is carried out in each case with the reversal
movement type (document neutral reversal).The original documents are
not reversed related to the document.This may lead to deviations in
the accounting caused by valuation.
3. Resetting postings for materials requiring serial numbers is not
supported.
4. With this correction program, you cannot reverse goods movements for
inpection lots for handling units (HU).
5. Batch status changes which have possibly been carried out are not
cancelled.
6. Batches which have been created in the usage decision during a
transfer posting are not deleted.The classification of these batches
is not changed either.
Page 2
7. Within the adjustment posting, in Release 4.x, the reference records
are also adjusted between the material document and inspection
lot.This can possibly lead to an incorrect description of the
reference type when displaying material documents for the inspection
lot.In Release 3.x, the reference records are deleted in order to
make sure that individual documents cannot be cancelled several
times.
8. The program does not contain any own authorization checks and should
be used with utmost care and ONLY after a successful test. The
program should ONLY be applied in exceptions and should not be part
of the standard procedure.
9. The logic implemented in the program for the generation of material
documents or for the update of inspection lot quantities and
inspection lot status should under no circumstances be be changed as
this might lead to inconsistent data. Since this is a program that is
not contained in the standard system, problems that are created as a
result of the program application can be dealt with as problems that
have arisen as a result of a customer modification.
To implement the program, proceed as follows:
1. Create an executable program and copy the attached source code.Then
maintain the text for selection parameter PRUEFLOS by transferring
the Dictionary text.
2. If you a use a Release < 4.6, you must create the function group
ZQMB. In this function group, you must create function module
'ZQMB_QAMB_CANCEL'. Flag the function module as an update function
module (Start immediately) and include table interface parameter
'I_QAMB_TAB' (type specification LIKE, reference structure QAMB).
Afterwards you must include exception 'ERROR_DURING_UPDATE' and
implement the attached source code.
3. Use Transaction OMJJ to enter further entries in level 'Allowed
transactions' (table T158B) for transaction code 'QA11' (Record Usage
Decision).The movement types for which these entries must be created
are derived from the system settings for the goods movements for the
usage decision (table TQ07M):The reversal movement type must be
determined for every movement type that is entered in table TQ07M
with the key VMENGE01 - VMENGE09 and the corresponding entry must be
included in the above-mentioned table.You can use table T156N for
determining the reversal movement type:You can determine the reversal
movement type by entering the movement type (BWART) and function code
(FCODE) ST (BWART_NEXT).For missing entries, the system generates
error M7096 'Goods movement not possible with mvmt type &'.
Source code corrections
Page 3
Valid releases
R/3 Standard 46C - 46D
46A - 46B
45A - 45B
40A - 40B
30F - 31I
Other components
QM-IM Quality Inspection
Reference to related notes
Number Short text
0033924 Cancelling usage decisions
0048815 Checking possible inconsistencies between MM and QM
Page 4
Assigned correction instructions
$$----
$$
$ Correction Instr. : 0120024545 0000111772 $
$ Software Component : SAP_APPL SAP Application $
*$----
$*
$ Validity : 40A SAPKH40A01 - SAPKH40A25 $
$ : 40B All Patches $
$ : 45A All Patches $
$ : 45B All Patches $
*$----
$*
$ Changes/Objects Not Contained in Standard SAP System $
$$----
$$
*& Object FUNC ZQMB_QAMB_CANCEL
*& Object Header FUGR ZQMB
*& FUNCTION ZQMB_QAMB_CANCEL
*>>>> START OF INSERTION <<<<
UPDATE QAMB FROM TABLE I_QAMB_TAB.
IF NOT SY-SUBRC IS INITIAL.
RAISE ERROR_DURING_UPDATE.
ENDIF.
*>>>> END OF INSERTION <<<<<<
*& Object REPS RQEVAC50
*& Object Header PROG RQEVAC50
*& REPORT RQEVAC50
*>>>> START OF INSERTION <<<<
REPORT RQEVAC50 MESSAGE-ID QA.
TYPES:
T_QAMB_TAB LIKE QAMB OCCURS 0,
T_MKPF_TAB LIKE MKPF OCCURS 0,
T_MSEG_TAB LIKE MSEG OCCURS 0.
PARAMETERS:
PRUEFLOS LIKE QALS-PRUEFLOS OBLIGATORY MEMORY ID QLS.
DATA:
G_MSGV1 LIKE SY-MSGV1,
G_QALS LIKE QALS,
G_QALS_LEISTE LIKE QALS,
G_QAMB_TAB TYPE T_QAMB_TAB,
G_QAMB_VB_TAB TYPE T_QAMB_TAB,
G_MKPF_TAB TYPE T_MKPF_TAB,
G_MSEG_TAB TYPE T_MSEG_TAB,
G_SUBRC LIKE SY-SUBRC.
START-OF-SELECTION.
Page 5
PERFORM ENQUEUE_QALS USING PRUEFLOS
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_QALS USING PRUEFLOS
G_QALS
G_QALS_LEISTE
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '102'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_LOT USING G_QALS
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
CASE G_SUBRC.
WHEN 128.
G_MSGV1 = 'Material & is serialized'.
REPLACE '&' WITH G_QALS-MATNR INTO G_MSGV1.
WHEN 64.
G_MSGV1 = 'Lot & is not stock relevant'.
WHEN 32.
G_MSGV1 = 'Lot &: No stock transferred'.
WHEN 16.
G_MSGV1 = 'Lot & is cancelled'.
WHEN 8.
G_MSGV1 = 'Lot & is archived'.
WHEN 4.
G_MSGV1 = 'Lot & is blocked'.
WHEN 2.
G_MSGV1 = 'Lot & is HU managed'.
ENDCASE.
REPLACE '&' WITH PRUEFLOS INTO G_MSGV1.
MESSAGE ID '00' TYPE 'S' NUMBER '208'
WITH G_MSGV1.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_QAMB USING G_QALS
G_QAMB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_MKPF USING G_QAMB_TAB
G_MKPF_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
Page 6
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_MKPF USING G_MKPF_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_MSEG USING G_MKPF_TAB
G_MSEG_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_MSEG USING G_MSEG_TAB
G_QAMB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CREATE_GOODS_MOVEMENT USING G_QALS
G_MSEG_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM POST_GOODS_MOVEMENT.
PERFORM POST_DATA USING G_QALS
G_QALS_LEISTE
G_QAMB_TAB
G_QAMB_VB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ELSE.
COMMIT WORK AND WAIT.
G_MSGV1 = 'inspection lot &'.
REPLACE '&' WITH PRUEFLOS INTO G_MSGV1.
MESSAGE ID '00' TYPE 'S' NUMBER '368'
Page 7
WITH 'Stock posting reversed for ' G_MSGV1.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
Form ENQUEUE_QALS *
Los sperren *
FORM ENQUEUE_QALS USING P_PRUEFLOS LIKE QALS-PRUEFLOS
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
CALL FUNCTION 'ENQUEUE_EQQALS1'
EXPORTING
PRUEFLOS = P_PRUEFLOS
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
P_SUBRC = SY-SUBRC.
ENDFORM. " ENQUEUE_QALS
Form READ_QALS *
Prüflos lesen *
FORM READ_QALS USING P_PRUEFLOS LIKE QALS-PRUEFLOS
P_QALS LIKE QALS
P_QALS_LEISTE LIKE QALS
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
CALL FUNCTION 'QPSE_LOT_READ'
EXPORTING
I_PRUEFLOS = P_PRUEFLOS
I_RESET_LOT = 'X'
IMPORTING
E_QALS = P_QALS
EXCEPTIONS
NO_LOT = 1.
P_SUBRC = SY-SUBRC.
IF P_SUBRC IS INITIAL.
P_QALS_LEISTE = P_QALS.
ELSE.
CLEAR: P_QALS,
P_QALS_LEISTE.
ENDIF.
ENDFORM. " READ_QALS
Form CHECK_LOT *
Page 8
Prüflos prüfen *
FORM CHECK_LOT USING P_QALS LIKE QALS
P_SUBRC LIKE SY-SUBRC.
DATA:
L_STAT LIKE JSTAT,
L_STAT_TAB LIKE JSTAT OCCURS 0 WITH HEADER LINE.
P_SUBRC = 128.
*/Serialized Material
IF NOT P_QALS-SERNP IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 64.
ENDIF.
*/BERF
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0203'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF NOT SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 32.
ENDIF.
*/BTEI & BEND
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0219'. APPEND L_STAT TO L_STAT_TAB. "BTEI
L_STAT-STAT = 'I0220'. APPEND L_STAT TO L_STAT_TAB. "BEND
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 16.
ENDIF.
*/LSTO & LSTV
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0224'. APPEND L_STAT TO L_STAT_TAB. "LSTO
L_STAT-STAT = 'I0232'. APPEND L_STAT TO L_STAT_TAB. "LSTV
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
Page 9
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF NOT L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 8.
ENDIF.
*/ARSP & ARCH & REO1 & REO2 & REO3
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0225'. APPEND L_STAT TO L_STAT_TAB. "ARSP
L_STAT-STAT = 'I0226'. APPEND L_STAT TO L_STAT_TAB. "ARCH
L_STAT-STAT = 'I0227'. APPEND L_STAT TO L_STAT_TAB. "REO3
L_STAT-STAT = 'I0228'. APPEND L_STAT TO L_STAT_TAB. "REO2
L_STAT-STAT = 'I0229'. APPEND L_STAT TO L_STAT_TAB. "REO1
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF NOT L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 4.
ENDIF.
*/SPER
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0043'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 2.
ENDIF.
*/HUM
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0443'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 0.
ENDIF.
Page 10
ENDFORM. " CHECK_LOT
Form READ_QAMB *
QAMBs lesen *
FORM READ_QAMB USING P_QALS LIKE QALS
P_QAMB_TAB TYPE T_QAMB_TAB
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
SELECT * FROM QAMB INTO TABLE P_QAMB_TAB
WHERE PRUEFLOS = P_QALS-PRUEFLOS
AND TYP = '3'.
P_SUBRC = SY-SUBRC.
ENDFORM. " READ_QAMB
Form READ_MKPF *
Read material document header *
FORM READ_MKPF USING P_QAMB_TAB TYPE T_QAMB_TAB
P_MKPF_TAB TYPE T_MKPF_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
BEGIN OF L_MKPF_KEY_TAB OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
END OF L_MKPF_KEY_TAB.
DATA:
L_QAMB LIKE QAMB,
L_MKPF LIKE MKPF,
L_TRTYP LIKE T158-TRTYP VALUE 'A',
L_VGART LIKE T158-VGART VALUE 'WQ',
L_XEXIT LIKE QM00-QKZ.
P_SUBRC = 4.
LOOP AT P_QAMB_TAB INTO L_QAMB.
L_MKPF_KEY_TAB-MBLNR = L_QAMB-MBLNR.
L_MKPF_KEY_TAB-MJAHR = L_QAMB-MJAHR.
COLLECT L_MKPF_KEY_TAB.
ENDLOOP.
LOOP AT L_MKPF_KEY_TAB.
CALL FUNCTION 'ENQUEUE_EMMKPF'
EXPORTING
MBLNR = L_MKPF_KEY_TAB-MBLNR
MJAHR = L_MKPF_KEY_TAB-MJAHR
EXCEPTIONS
FOREIGN_LOCK = 1
Page 11
SYSTEM_FAILURE = 2
OTHERS = 3.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ENDIF.
CLEAR: L_MKPF.
CALL FUNCTION 'MB_READ_MATERIAL_HEADER'
EXPORTING
MBLNR = L_MKPF_KEY_TAB-MBLNR
MJAHR = L_MKPF_KEY_TAB-MJAHR
TRTYP = L_TRTYP
VGART = L_VGART
IMPORTING
KOPF = L_MKPF
EXCEPTIONS
ERROR_MESSAGE = 1.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ELSE.
APPEND L_MKPF TO P_MKPF_TAB.
ENDIF.
ENDLOOP.
IF NOT L_XEXIT IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 0.
ENDIF.
ENDFORM. " READ_MKPF
Form READ_MSEG *
MSEGs lesen *
FORM READ_MSEG USING P_MKPF_TAB TYPE T_MKPF_TAB
P_MSEG_TAB TYPE T_MSEG_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_MKPF LIKE MKPF,
L_MSEG_TAB LIKE MSEG OCCURS 0 WITH HEADER LINE,
L_TRTYP LIKE T158-TRTYP VALUE 'A',
L_XEXIT LIKE QM00-QKZ.
P_SUBRC = 4.
LOOP AT P_MKPF_TAB INTO L_MKPF.
CLEAR: L_MSEG_TAB. REFRESH: L_MSEG_TAB.
CALL FUNCTION 'MB_READ_MATERIAL_POSITION'
EXPORTING
Page 12
MBLNR = L_MKPF-MBLNR
MJAHR = L_MKPF-MJAHR
TRTYP = L_TRTYP
*/ ZEILB = P_ZEILE
*/ ZEILE = P_ZEILE
TABLES
SEQTAB = L_MSEG_TAB
EXCEPTIONS
ERROR_MESSAGE = 1.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ELSE.
APPEND LINES OF L_MSEG_TAB TO P_MSEG_TAB.
ENDIF.
ENDLOOP.
IF NOT L_XEXIT IS INITIAL.
EXIT.
ELSE.
*/ XAuto-Zeilen und Chargenzustandsänderung werden gelöscht
DELETE P_MSEG_TAB WHERE XAUTO NE SPACE
OR BWART EQ '341'
OR BWART EQ '342'.
P_SUBRC = 0.
ENDIF.
ENDFORM. " READ_MSEG
Form CREATE_GOODS_MOVEMENT *
Warenbewegung anlegen *
FORM CREATE_GOODS_MOVEMENT USING P_QALS LIKE QALS
P_MSEG_TAB TYPE T_MSEG_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_LMENGEZUB LIKE QALS-LMENGEZUB,
L_LMENGEGEB LIKE QALS-LMENGEZUB,
L_MBQSS LIKE MBQSS,
L_IMKPF LIKE IMKPF,
L_IMSEG LIKE IMSEG,
L_IMSEG_TAB LIKE IMSEG OCCURS 1,
L_EMKPF LIKE EMKPF,
L_EMSEG LIKE EMSEG,
L_EMSEG_TAB LIKE EMSEG OCCURS 1,
L_MSEG LIKE MSEG,
L_MSEG_TAB LIKE MSEG OCCURS 1,
L_TCODE LIKE SY-TCODE VALUE 'QA11',
L_TABIX LIKE SY-TABIX VALUE 1,
L_XSTBW LIKE T156-XSTBW.
CLEAR: P_SUBRC.
Page 13
*/QAMB initialisieren
CALL FUNCTION 'QAMB_REFRESH_DATA'.
*/Kopf füllen
L_IMKPF-BLDAT = SY-DATLO.
L_IMKPF-BUDAT = SY-DATLO.
L_IMKPF-BKTXT = 'Cancellation of QM UD postings'.
*/Ursprüngliche zu buchende Menge merken + inkrementieren
L_LMENGEZUB = P_QALS-LMENGEZUB.
L_LMENGEGEB = P_QALS-LMENGE01
+ P_QALS-LMENGE02
+ P_QALS-LMENGE03
+ P_QALS-LMENGE04
+ P_QALS-LMENGE05
+ P_QALS-LMENGE06
+ P_QALS-LMENGE07
+ P_QALS-LMENGE08
+ P_QALS-LMENGE09.
*/Zeilen aufbauen
L_MSEG_TAB[] = P_MSEG_TAB[].
LOOP AT L_MSEG_TAB INTO L_MSEG.
MOVE-CORRESPONDING L_MSEG TO L_MBQSS.
MOVE-CORRESPONDING L_MBQSS TO L_IMSEG.
*/ Referenzbeleg übergeben, falls Bestellnummer gefüllt
IF NOT L_MSEG-EBELN IS INITIAL.
MOVE: L_MSEG-LFBNR TO L_IMSEG-LFBNR,
L_MSEG-LFBJA TO L_IMSEG-LFBJA,
L_MSEG-LFPOS TO L_IMSEG-LFPOS.
ENDIF.
MOVE L_MSEG-KDAUF TO L_IMSEG-KDAUF.
MOVE L_MSEG-KDPOS TO L_IMSEG-KDPOS.
MOVE L_MSEG-PS_PSP_PNR TO L_IMSEG-PS_PSP_PNR.
*/ Umlagerungsfelder setzen
MOVE:
L_MSEG-UMMAT TO L_IMSEG-UMMAT,
L_MSEG-UMWRK TO L_IMSEG-UMWRK,
L_MSEG-UMLGO TO L_IMSEG-UMLGO,
L_MSEG-UMCHA TO L_IMSEG-UMCHA.
*/ Storno-Beleg setzen
MOVE: L_MSEG-MJAHR TO L_IMSEG-SJAHR,
L_MSEG-MBLNR TO L_IMSEG-SMBLN,
L_MSEG-ZEILE TO L_IMSEG-SMBLP.
*/ Falsch gefüllte Felder initialisieren
CLEAR: L_IMSEG-MBLNR,
L_IMSEG-MENGE,
L_IMSEG-MEINS.
*/ Bewegungsart lesen
SELECT SINGLE XSTBW FROM T156 INTO L_XSTBW
WHERE BWART = L_IMSEG-BWART.
Page 14
IF NOT SY-SUBRC IS INITIAL.
P_SUBRC = 4.
EXIT.
ENDIF.
*/ Werk/Lagerort füllen
IF P_QALS-STAT11 IS INITIAL.
IF L_XSTBW IS INITIAL.
MOVE P_QALS-LAGORTVORG TO L_IMSEG-LGORT.
ELSE.
MOVE P_QALS-LAGORTVORG TO L_IMSEG-UMLGO.
ENDIF.
ENDIF.
IF L_XSTBW IS INITIAL.
MOVE P_QALS-WERKVORG TO L_IMSEG-WERKS.
ELSE.
MOVE P_QALS-WERKVORG TO L_IMSEG-UMWRK.
ENDIF.
*/ Zusätzliche Felder
MOVE P_QALS-MENGENEINH TO L_IMSEG-ERFME.
"MOVE P_GRUND TO L_IMSEG-GRUND.
"MOVE P_ELIKZ TO L_IMSEG-ELIKZ.
*/ Kennzeichen Storno-Buchung setzen
MOVE 'X' TO L_IMSEG-XSTOB.
MOVE P_QALS-PRUEFLOS TO L_IMSEG-QPLOS.
APPEND L_IMSEG TO L_IMSEG_TAB.
IF P_QALS-STAT11 IS INITIAL.
ADD L_IMSEG-ERFMG TO L_LMENGEZUB.
SUBTRACT L_IMSEG-ERFMG FROM L_LMENGEGEB.
ELSE.
IF L_IMSEG-KZBEW EQ SPACE
AND L_IMSEG-WERKS NE SPACE
AND L_IMSEG-LGORT NE SPACE
AND L_IMSEG-UMWRK NE SPACE
AND L_IMSEG-UMLGO NE SPACE
AND L_IMSEG-WERKS EQ L_IMSEG-UMWRK
AND L_IMSEG-UMLGO EQ L_IMSEG-UMLGO.
*/ Dummy Buchung bei WE-Sperrbestand & Stichprobe
ELSE.
ADD L_IMSEG-ERFMG TO L_LMENGEZUB.
SUBTRACT L_IMSEG-ERFMG FROM L_LMENGEGEB.
ENDIF.
ENDIF.
ENDLOOP.
IF NOT P_QALS-STAT11 IS INITIAL.
*/ Bei WE-Sperrbestand und Stichprobenbuchung Zeilen tauschen
DO.
READ TABLE L_IMSEG_TAB INDEX SY-INDEX INTO L_IMSEG.
IF SY-SUBRC IS INITIAL
AND L_IMSEG-KZBEW EQ SPACE
AND L_IMSEG-WERKS NE SPACE
AND L_IMSEG-LGORT NE SPACE
AND L_IMSEG-UMWRK NE SPACE
AND L_IMSEG-UMLGO NE SPACE
Page 15
AND L_IMSEG-WERKS EQ L_IMSEG-UMWRK
AND L_IMSEG-UMLGO EQ L_IMSEG-UMLGO.
IF SY-TABIX NE L_TABIX.
DELETE L_IMSEG_TAB INDEX SY-TABIX.
INSERT L_IMSEG INTO L_IMSEG_TAB INDEX L_TABIX.
L_TABIX = L_TABIX + 1.
ELSE.
L_TABIX = L_TABIX + 1.
CONTINUE.
ENDIF.
ELSEIF SY-SUBRC IS INITIAL.
CONTINUE.
ELSE.
EXIT. "from do
ENDIF.
ENDDO.
ENDIF.
*/QM deaktivieren
CALL FUNCTION 'QAAT_QM_ACTIVE_INACTIVE'
EXPORTING
AKTIV = SPACE.
*/Buchen
CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
EXPORTING
IMKPF = L_IMKPF
XALLP = 'X'
XALLR = 'X'
CTCOD = L_TCODE
XQMCL = ' '
IMPORTING
EMKPF = L_EMKPF
TABLES
IMSEG = L_IMSEG_TAB
EMSEG = L_EMSEG_TAB.
*/QM wieder aktivieren
CALL FUNCTION 'QAAT_QM_ACTIVE_INACTIVE'
EXPORTING
AKTIV = 'X'.
*/Buchung auswerten
IF L_EMKPF-SUBRC GT 1.
IF L_EMKPF-MSGID NE SPACE.
*/ Fehler auf Kopfebene
MESSAGE ID L_EMKPF-MSGID TYPE 'S'
NUMBER L_EMKPF-MSGNO
WITH L_EMKPF-MSGV1 L_EMKPF-MSGV2
L_EMKPF-MSGV3 L_EMKPF-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ELSE.
*/ Fehler auf Zeilenebene (Ausgabe des ersten Fehlers)
LOOP AT L_EMSEG_TAB INTO L_EMSEG.
IF L_EMSEG-MSGID NE SPACE.
MESSAGE ID L_EMSEG-MSGID TYPE 'S'
NUMBER L_EMSEG-MSGNO
WITH L_EMSEG-MSGV1 L_EMSEG-MSGV2
L_EMSEG-MSGV3 L_EMSEG-MSGV4.
Page 16
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
LOOP AT L_EMSEG_TAB INTO L_EMSEG.
CALL FUNCTION 'QAMB_COLLECT_RECORD'
EXPORTING
LOTNUMBER = P_QALS-PRUEFLOS
DOCYEAR = L_EMKPF-MJAHR
DOCNUMBER = L_EMKPF-MBLNR
DOCPOSITION = L_EMSEG-MBLPO
TYPE = '7'.
ENDLOOP.
*/Sonderkorrektur für Frei-An-Frei & WE-Sperr-An-We-Sperr
IF NOT P_QALS-STAT11 IS INITIAL.
IF P_QALS-LMENGE04 EQ L_LMENGEGEB.
ADD P_QALS-LMENGE04 TO L_LMENGEZUB.
SUBTRACT P_QALS-LMENGE04 FROM L_LMENGEGEB.
ENDIF.
ELSEIF P_QALS-INSMK IS INITIAL.
IF P_QALS-LMENGE01 GE L_LMENGEGEB
AND NOT P_QALS-LMENGE01 IS INITIAL.
ADD L_LMENGEGEB TO L_LMENGEZUB.
SUBTRACT L_LMENGEGEB FROM L_LMENGEGEB.
ENDIF.
ENDIF.
CLEAR: P_QALS-STAT34,
P_QALS-MATNRNEU,
P_QALS-CHARGNEU,
P_QALS-LMENGE01,
P_QALS-LMENGE02,
P_QALS-LMENGE03,
P_QALS-LMENGE04,
P_QALS-LMENGE05,
P_QALS-LMENGE06,
P_QALS-LMENGE07,
P_QALS-LMENGE08,
P_QALS-LMENGE09.
P_QALS-LMENGEZUB = L_LMENGEZUB.
IF NOT L_LMENGEGEB IS INITIAL.
P_SUBRC = 4.
ENDIF.
ENDFORM. " CREATE_GOODS_MOVEMENT
Form POST_GOODS_MOVEMENT *
Warenbewegung buchen *
FORM POST_GOODS_MOVEMENT.
CALL FUNCTION 'MB_POST_GOODS_MOVEMENT'.
Page 17
ENDFORM. " POST_GOODS_MOVEMENT
Form POST_DATA *
QM-Daten verbuchen *
FORM POST_DATA USING P_QALS LIKE QALS
P_QALS_LEISTE LIKE QALS
P_QAMB_TAB TYPE T_QAMB_TAB
P_QAMB_VB_TAB TYPE T_QAMB_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_STAT LIKE JSTAT,
L_STAT_TAB LIKE JSTAT OCCURS 0,
L_QAMB LIKE QAMB,
L_UPDKZ LIKE QALSVB-UPSL VALUE 'U'.
*/QAMBs umsetzen (7 = VE-Buchung storniert)
LOOP AT P_QAMB_TAB INTO L_QAMB.
L_QAMB-TYP = '7'.
APPEND L_QAMB TO P_QAMB_VB_TAB.
ENDLOOP.
*/BERF & BTEI zurücknehmen
CLEAR L_STAT. CLEAR L_STAT_TAB.
L_STAT-INACT = 'X'.
L_STAT-STAT = 'I0219'. APPEND L_STAT TO L_STAT_TAB. "BTEI
L_STAT-STAT = 'I0220'. APPEND L_STAT TO L_STAT_TAB. "BEND
CALL FUNCTION 'STATUS_CHANGE_INTERN'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS = L_STAT_TAB
EXCEPTIONS
ERROR_MESSAGE = 1.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
*/Prüflos aktualisieren
CALL FUNCTION 'QPL1_UPDATE_MEMORY'
EXPORTING
I_QALS = P_QALS
I_UPDKZ = L_UPDKZ.
CALL FUNCTION 'QPL1_INSPECTION_LOTS_POSTING'.
CALL FUNCTION 'STATUS_UPDATE_ON_COMMIT'.
*/QAMB initialisieren
CALL FUNCTION 'QAMB_REFRESH_DATA'.
Page 18
PERFORM UPDATE_QAMB ON COMMIT.
P_SUBRC = 0.
ENDFORM. " POST_DATA
Form UPDATE_QAMB * -
BAPI or FM for changing usage decision on Inspection lot
Hi,
Does anyone know of any BAPI or FM which can change usage decision on inspection lot. I'm already aware of BAPI_INSPLOT_SETUSAGEDECISION. This only works when there is no UD on inspection lot.
Thanks for your help.
Stephenhi peter,
BAPI_INSPCHAR_SETRESULT Confirm Inspection Results. BAPI_INSPLOT_GETDETAIL Load Detail Data and Usage Decision for Inspection Lot
see this link for list of bapis....
http://www.sapbapi.com/bapi-list/
thanks
sagar
reward me points if usefull -
Usage decision vs result recording.
Hi All Guru,
I am new in QM , was MM & PP support. I am confused here about the usage decision vs result recording.
I do understand in QM there's inspection lot , in order to release the inspection lot , i should released the UD.
So what's the different between this both ?
Can i have inspection lot without result recording ?
Or can i have inspection lot without UD ?
Please help to clarify my confuse.
Thank youHi Crag ,
Thanks for understand because i am totally new in QM.
I won't use QM for Notification here. I will use QM for stock transfer & QM in Delivery before PGI.
As i know the basic requirement of QM
Setup the Master Data (QM View & all QM relavant data) ---> Type of inspection (which will determine which type of inspection to carry out ) -----> Inspection Lot Configuration --->Configuration for UD ----> Configuration for COA.
Master data that which required
Material master QM view,
Master inspection characteristics,
Task lists or inspection plans
Code, Code groups and Selected sets.
Quality info-record
My Question :
By having the above setup and configuration , without result recording can i have the COA to print out for either Post Process Inspection (Final FG) or Inspection at Delivery ?
With the Master Data which i mention as above , is it sufficient for me to activate
Post Process Inspection (Final FG - QM PP)
QM Inspection at Delivery (QM /SD)
QM stock transfer with inspection type 08.
Hope to hear from you.
Thank you -
Usage Decision IP address / Terminal Number
How to get Usage Decision IP address / Terminal Number?
Hi Vivek.
Just a note, your posting was reported as probably being in the wrong forum and more suited to a BASIS or security forum. But the question is about UD's so it's a borderline call for me so I left it.
Now, as far as the question goes, I don't think what you want is possible without modifications. There is no log tracking IP address for when a UD is given. I.e. the IP address is not stored with the UD administrative data anywhere. So once the user logs off, any chance of getting that data would be zero.
I do know your BASIS or security team can definitely get the IP address for user's online and depending on what they are recording and monitoring, they may have logs but probably not directly related to the transactions used.
This discussion has a lot of info in it: SAP User Login Transaction code History details
The trick will be to capture the info and store it some where. My suggestion might be to utilize a user exit when the UD is saved, and use the FM "TERMINAL_ID_GET" to get the IP address. (Note: I have not personally done this or used that FM, but I am told that it will return a user's IP address), then store the IP address in the UD long text.
Craig -
QM Module: Usage Decision for Inspection Lot
Dear All,
After made of Usage Decision the Notification will receive to the respective Managers as mentioned below:
IF Usage Decision is <b>QCR</b> then Notification will receive to only Marketing Manager
IF Usage Decision is <b>MR</b> then Notification will receive to Logistics Manager, QC manager and Production Manager
IF Usage Decision is <b>MA</b> then Notification will receive to Logistics Manager, QC manager and Production Manager
IF Usage Decision is <b>MAC</b> then Notification will receive to Logistics Manager, QC manager and Production Manager
IF Usage Decision is <b>QCA</b> then Notification will receive to Logistics Manager, Marketing Manager and Production Manager
Any Suggestions pls, workflow logic in this requirement.
Is there any Solutions without ABAP coding.
Thanks and Regards,
Prabhakar Dharmala
Message was edited by:
Prabhakar DharmalaI'm sorry, I am not sure if I understand any more now, but one quick check: When you write RULE, are you specifically meaning RESPONSIBILITY RULE?
I said that a rule is needed to specify work item agents (workflow step specification of selected agents). It is not quite true, you can specify the selected agents in other ways such as using expressions etc. You could therefore create a subtype of your business object where you define virtual attributes for the different agents you mentioned, i.e. a virtual attribute AG_MARKETING_MANAGER, another one called AG_LOGISTICS_MANAGER, a third one called AG_QC_MANAGER, and finally one called AG_PRODUCTION_MANAGER. These should have the data type TSWHACTOR.
However, you are asking for a method that does not involve rules, AND does not involve ABAP coding. I think you are out of luck there, because the virtual attributes will require (some) ABAP coding, and of course this approach is of more interest if these managers can be determined based on data that are maintained anyway - to save you the addition maintenance of the responsibility matrix in the workflow (responsibility) rule.
You can obtain exactly the same by creating a workflow rule that takes whatever parameters are relevant, plus the Usage Decision.
If you want to send a single step/mail to all the managers (I couldn't quite understand if you wanted a single step to a varying number of managers or a varying number of steps) the latter solution would be the best one, as the rule would give you the correct list of managers without any additional steps in the workflow.
If you create virtual attributes you can use container operations in the workflow to put all the relevant managers into one multiline container element. But that seems rather awkward compared to creating a workflow rule. -
Usage Decision BAPI_INSPLOT_SETUSAGEDECISION giving error.
Hi Experts,
I want to perform Usage Decision by using this BAPI_INSPLOT_SETUSAGEDECISION after performing Result recording of the Inspection lot. It is giving me error selected set code does not exist or data entered is incomplete.
Thanks
SaurabhIssue has been resolved
Thanks -
BAPI to post stock movement in QM's Usage Decision
I'm looking for a bapi or standard program to register stock movements in QM as a result of a usage decision.
We've tried using BAPI_GOODSMVT_CREATE with no success as it returns error QA 495 "Change the inspection stock of material in QM only"
Thanks
AndréHello!
You do not need to create TO manually. Set up RLAUTA11 report as a job.
To run RLAUTA11 you have to maitain:
creation indicator:
Logistic Execution->Warehouse Managment->Activities->Transfers->Set Up Autom. TO Creation for TRs / Posting Change Notices->Automatic TO creation/control data: for warehouse level: any character
Logistic Execution->Warehouse Managment->Activities->Transfers->Set Up Autom. TO Creation for TRs / Posting Change Notices->Movements assign: set up your indicator in field "Automatic TO" Background processing (MvT type and warehouse, probably your e.g. MvT is 321 - realese from Quality Inspection stock)
Next You must create variant for job with your warehouse and creation indicator.
Best Regards,
Marcin -
Usage decision thru QA11 for forcibly give the UD code on a inspection lot
All,
I am trying to do an usage decision through QA11.Where in Batch for respective Inspection Lot we have to find the PD,SLED and NID there .
when i forcibly give the UD code on a inspection lot and save this it will calculate the NEXT inspection Date.But some times the NID value is greater than SLED value after the UD.
My requirment if NID is greater than SLED after UD then give a waring message.
Any suggestions would be appreciated.
Regards,
SanjitHi Sanjit,
You can just try the BAPI: BAPI_INSPLOT_SETUSAGEDECISION
for more help, check the following helpful link:
Re: Stock posting through mb1b
Hope this will help you. -
(Usage Decision )Stock Post To Unrestricted Use.
Dear QM Expert,
I create a inspection lot of Finished Good and inspection type is 04 used when take a decision in QA11 then the Inspection lot is not open and the message has shown.
<b>The function you selected
cannot be
carried out:
Access usage decision</b>
When i use QA12 then message show is this,
<b>You cannot perform this task because the usage decision has not been made yet.</b>
But the stock is not posted To unrestricted use.
I want to stock post or cancel the document but i cant cancel or reverse the document.
Please suggest me the urgent bases what i do for stock post to unrestricted use.
Once problem has been mentioned here that the logistic period has been closed and FI/CO period will be close after six days.
thanks
ufarooq
Message was edited by:
Shahzad SamiHi,
Follow these steps for the qm inspn procurement.
1.Create Material Master Record with QM View.
2.Activate QM Proc/ Specify Control Key 0001.
3. choose Inspn set up and inspn type to be entered as 01 and set the active indicator.
4. Create Q-info record with material / vendor.(qi01)
5. Enter the release by date as 31.12.9999
7.Create inspn plan(qp01) with usage 5 and status 4and enter the control key as PPQM.
8.Choose the operation and assign the inspn characteristic / sampling procedure
9.MD61/MD02/MD04
10 Convert the Purchase requisition as Purchase Order.
11. Receive the Material against the PO.
12. In MIGO against PO receive the material.
13.QM lot will be created
14.qa02 check inspn plan / sample.
15.qe51n results recording
lot origin 01 mat no and execute results
16.qa11 ud code select accept and chooseinspn tab page and type the qty to be proposed and save.
17.stock will move to unrestricted use .
Regards,
nandha -
[HELP] - QM cancel usage decision
Hello SAP gurus,
I need dome help with a QM scenario.
How can I cancel a UD and move the stock again to Quality Inspection?
Thanks in advance,
AdelmoHi
here is some more help,
Follow the link (page 27) http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/QMIMUD/QMIMUD.pdf
Reversing Stock Postings
1. Choose Logistics > Materials Management > Inventory Management > Goods Movement> Goods receipt > For purchase order> PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
2. In the field for the movement type, enter 102 (goods receipt for a purchase order into
warehouse - reversal).
3. In the field for the purchase order, enter the purchase order number for the original goods
receipt.
You can copy the purchase order number from the inspection lot.
4. Choose Enter to display the selection screen for the purchase order items.
5. Select the purchase order item for which you want to create the goods receipt and set the
Stock type indicator to the stock to which the goods were originally posted with the
usage decision (for example, F for unrestricted-use stock or S for blocked stock).
6. Save the goods receipt and exit the Materials Management component.
7. Choose Logistics > Quality management > Quality inspection > Inspection lot> Usage
decision > Change with history.
The initial screen for changing a usage decision appears.
8. Enter the number of the inspection lot for which you previously made the usage decision and
choose Usage decision (UD).
9. To cancel the inspection lot, choose Usage decision > Functions . Cancel lot in the usage
decision screen.
Regards
Suhas
Maybe you are looking for
-
Disk image mounting and disk utility oddities on Xserve running OS X Server
I continue to run into an odd problem on one of my server setups. It is a 1.33 GHZ Xserve running OS X Server 10.4.11. There are four ATA drive installed (two of which are mirrored using Softraid 3.6.6). There are a total of 6 Firewire drives on the
-
How do I Hide the text printed from a standard Text Element in SAP Script?
Hi, I have created one SAP Script which gets printed from IW33 using a standard print program. In config the standrad SAP script is replaced by the zsap script. Since the Zscript is printed from a Standard print program, I had to keep all the text el
-
I am trying to burn a disc from FCP--through quicktime. The DVD processes then ejects right before it reads: Multiplexing and burning...then nothing. What can I do?? Thanks.B.
-
I am working with Final Cut Pro 6 (Studio 2) on a Mac with OS X (10.5.6), and for over a year now, I have archived master copies of client projects by: - "Export > Quicktime Movie" - Leaving all settings at default, including NOT checking "Make Movie
-
hello every one, i am trying to run some run but system is showing no data for example breaddown analysis. I am using every thing standard except equipment. Kindly provide me some input on this. Regards Abhishek