Usage decision related tables
Hi,
I do a usage decision for a inspection lot of 10 qty in QA32. I enter UD code A( accept) and quantity as 4 and save.stock gets posted. Again in QA32 I enter UD code as A1 ( conditional accept) for the same inspection lot and post remaining qty 6 .
In what table can I get qty as 4 and 6 for a given inspection lot. Kindly help.
Regards.
Hi,
In that functional module, I can get details of the last UD code which I have entered during Usage decisions.Previous UD codes are not there.Same is happening in table QAMB also.
Pls guide.
Regards.
Similar Messages
-
Customizing mmbe screen in order to display Usage Decision????
Hello everyone,
I am SAP QM/MM consultant..
My client wants a customized mmbe screen, in which besides the Unrestricted and QI stock, there should be an additional column for Usage Decision in which the Usage Decision ( wrt QM ) for that particular batch should be displayed.
I have never done this and have no idea how mmbe screen can be customized in order to display Usage decison..
Please provide your valuable inputs to my query asap..
I would really appreciate.
Thanks n Regards
NehaHi Neha
U have to custumize non standerd report (Z Report) .
take the data of usage decision from table QALS.
Regards
Sunil -
Relation between result recording and usage decision
Dear Gurus
While result recording for a lot, if any value comes less than or more than the limiting value the system is automatically valuating either rejected or accepted .. But this valuation is not getting reflected in the usage decision there I can give accepted code even though it is rejected in RR. If any expert can tell me how to configure and relate RR with UD
Regards
Sandip SarkarHi
Sandip
As per SAP std there is no such a relation betweenRR & UD
but you can keep acheck that Result are recorded & what is valuation.
Use User Exit QEVA0010 UD: Usage decision check Logic will be check whether RR is done & all the char have status 5.
that means all char are valutated.Then Build a logic that as per acceeptence or rejection of char UD code must be get selected.
Suppose all char are rejected & you are taking UD as Accepted(A) then System should through Msg reading same.
I hope this will add some value.
Regards
Sujit -
PP - QM: Reversal of the usage decision
Hi Gurus,
We have completed Result Recording using QE51N transaction and Usage decision using QA11. It has posted a stock from QI to Unrestricted use. Now I want to take it back from Unrestricted use to QI. This needs reversal of usage decision (What I think).
Can you suggest me the proper way of performing the said transaction?
I will really appreciate your concern.
Thanks
ShivR/3 note no. 175842 14.12.2001 Page 1
Number 0175842
Version 0021 from 29.11.2001
Status Released for customer
Set by SAP AG on 03.12.2001
Language EN
Short text Inspection lot: Reversal of goods movements from UD
Administrator SAP AG
Component QM-IM-UD Inspection Lot Completion
Long text
Symptom
Goods movements, which were created from the transactions of the usage
decision, can no longer be reversed.
Additional key words
QA11, QA12, QA14, MBST, MF41
Inspection lot, usage decision, goods movements, reversal, material
document
Cause and preconditions
Presently, the function is not provided in the standard system.
Solution
The function is not provided in the standard system up to and including
Release 4.6C.
When you do this bear the following in mind:
1. Using the attached program corrections, stock transfer postings can
be reset for the usage decision.If it is possible to post this
document in the stock management, the inspection lot is also
corrected and the Quality Management Information System is if
necessary updated.After the reset has been successfully carried out,
the inspection lot, related to the stocks, has the status before the
first stock credit entry.The usage decision is not reset.If, after
the usage decision, further transfer postings are carried out in the
stock management which lead to the usage decision transfer postings
not being able to be reset due to missing availability, these
postings must be reversed first.
2. The goods movement is carried out in each case with the reversal
movement type (document neutral reversal).The original documents are
not reversed related to the document.This may lead to deviations in
the accounting caused by valuation.
3. Resetting postings for materials requiring serial numbers is not
supported.
4. With this correction program, you cannot reverse goods movements for
inpection lots for handling units (HU).
5. Batch status changes which have possibly been carried out are not
cancelled.
6. Batches which have been created in the usage decision during a
transfer posting are not deleted.The classification of these batches
is not changed either.
Page 2
7. Within the adjustment posting, in Release 4.x, the reference records
are also adjusted between the material document and inspection
lot.This can possibly lead to an incorrect description of the
reference type when displaying material documents for the inspection
lot.In Release 3.x, the reference records are deleted in order to
make sure that individual documents cannot be cancelled several
times.
8. The program does not contain any own authorization checks and should
be used with utmost care and ONLY after a successful test. The
program should ONLY be applied in exceptions and should not be part
of the standard procedure.
9. The logic implemented in the program for the generation of material
documents or for the update of inspection lot quantities and
inspection lot status should under no circumstances be be changed as
this might lead to inconsistent data. Since this is a program that is
not contained in the standard system, problems that are created as a
result of the program application can be dealt with as problems that
have arisen as a result of a customer modification.
To implement the program, proceed as follows:
1. Create an executable program and copy the attached source code.Then
maintain the text for selection parameter PRUEFLOS by transferring
the Dictionary text.
2. If you a use a Release < 4.6, you must create the function group
ZQMB. In this function group, you must create function module
'ZQMB_QAMB_CANCEL'. Flag the function module as an update function
module (Start immediately) and include table interface parameter
'I_QAMB_TAB' (type specification LIKE, reference structure QAMB).
Afterwards you must include exception 'ERROR_DURING_UPDATE' and
implement the attached source code.
3. Use Transaction OMJJ to enter further entries in level 'Allowed
transactions' (table T158B) for transaction code 'QA11' (Record Usage
Decision).The movement types for which these entries must be created
are derived from the system settings for the goods movements for the
usage decision (table TQ07M):The reversal movement type must be
determined for every movement type that is entered in table TQ07M
with the key VMENGE01 - VMENGE09 and the corresponding entry must be
included in the above-mentioned table.You can use table T156N for
determining the reversal movement type:You can determine the reversal
movement type by entering the movement type (BWART) and function code
(FCODE) ST (BWART_NEXT).For missing entries, the system generates
error M7096 'Goods movement not possible with mvmt type &'.
Source code corrections
Page 3
Valid releases
R/3 Standard 46C - 46D
46A - 46B
45A - 45B
40A - 40B
30F - 31I
Other components
QM-IM Quality Inspection
Reference to related notes
Number Short text
0033924 Cancelling usage decisions
0048815 Checking possible inconsistencies between MM and QM
Page 4
Assigned correction instructions
$$----
$$
$ Correction Instr. : 0120024545 0000111772 $
$ Software Component : SAP_APPL SAP Application $
*$----
$*
$ Validity : 40A SAPKH40A01 - SAPKH40A25 $
$ : 40B All Patches $
$ : 45A All Patches $
$ : 45B All Patches $
*$----
$*
$ Changes/Objects Not Contained in Standard SAP System $
$$----
$$
*& Object FUNC ZQMB_QAMB_CANCEL
*& Object Header FUGR ZQMB
*& FUNCTION ZQMB_QAMB_CANCEL
*>>>> START OF INSERTION <<<<
UPDATE QAMB FROM TABLE I_QAMB_TAB.
IF NOT SY-SUBRC IS INITIAL.
RAISE ERROR_DURING_UPDATE.
ENDIF.
*>>>> END OF INSERTION <<<<<<
*& Object REPS RQEVAC50
*& Object Header PROG RQEVAC50
*& REPORT RQEVAC50
*>>>> START OF INSERTION <<<<
REPORT RQEVAC50 MESSAGE-ID QA.
TYPES:
T_QAMB_TAB LIKE QAMB OCCURS 0,
T_MKPF_TAB LIKE MKPF OCCURS 0,
T_MSEG_TAB LIKE MSEG OCCURS 0.
PARAMETERS:
PRUEFLOS LIKE QALS-PRUEFLOS OBLIGATORY MEMORY ID QLS.
DATA:
G_MSGV1 LIKE SY-MSGV1,
G_QALS LIKE QALS,
G_QALS_LEISTE LIKE QALS,
G_QAMB_TAB TYPE T_QAMB_TAB,
G_QAMB_VB_TAB TYPE T_QAMB_TAB,
G_MKPF_TAB TYPE T_MKPF_TAB,
G_MSEG_TAB TYPE T_MSEG_TAB,
G_SUBRC LIKE SY-SUBRC.
START-OF-SELECTION.
Page 5
PERFORM ENQUEUE_QALS USING PRUEFLOS
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_QALS USING PRUEFLOS
G_QALS
G_QALS_LEISTE
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '102'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_LOT USING G_QALS
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
CASE G_SUBRC.
WHEN 128.
G_MSGV1 = 'Material & is serialized'.
REPLACE '&' WITH G_QALS-MATNR INTO G_MSGV1.
WHEN 64.
G_MSGV1 = 'Lot & is not stock relevant'.
WHEN 32.
G_MSGV1 = 'Lot &: No stock transferred'.
WHEN 16.
G_MSGV1 = 'Lot & is cancelled'.
WHEN 8.
G_MSGV1 = 'Lot & is archived'.
WHEN 4.
G_MSGV1 = 'Lot & is blocked'.
WHEN 2.
G_MSGV1 = 'Lot & is HU managed'.
ENDCASE.
REPLACE '&' WITH PRUEFLOS INTO G_MSGV1.
MESSAGE ID '00' TYPE 'S' NUMBER '208'
WITH G_MSGV1.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_QAMB USING G_QALS
G_QAMB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_MKPF USING G_QAMB_TAB
G_MKPF_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
Page 6
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_MKPF USING G_MKPF_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_MSEG USING G_MKPF_TAB
G_MSEG_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_MSEG USING G_MSEG_TAB
G_QAMB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CREATE_GOODS_MOVEMENT USING G_QALS
G_MSEG_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM POST_GOODS_MOVEMENT.
PERFORM POST_DATA USING G_QALS
G_QALS_LEISTE
G_QAMB_TAB
G_QAMB_VB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ELSE.
COMMIT WORK AND WAIT.
G_MSGV1 = 'inspection lot &'.
REPLACE '&' WITH PRUEFLOS INTO G_MSGV1.
MESSAGE ID '00' TYPE 'S' NUMBER '368'
Page 7
WITH 'Stock posting reversed for ' G_MSGV1.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
Form ENQUEUE_QALS *
Los sperren *
FORM ENQUEUE_QALS USING P_PRUEFLOS LIKE QALS-PRUEFLOS
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
CALL FUNCTION 'ENQUEUE_EQQALS1'
EXPORTING
PRUEFLOS = P_PRUEFLOS
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
P_SUBRC = SY-SUBRC.
ENDFORM. " ENQUEUE_QALS
Form READ_QALS *
Prüflos lesen *
FORM READ_QALS USING P_PRUEFLOS LIKE QALS-PRUEFLOS
P_QALS LIKE QALS
P_QALS_LEISTE LIKE QALS
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
CALL FUNCTION 'QPSE_LOT_READ'
EXPORTING
I_PRUEFLOS = P_PRUEFLOS
I_RESET_LOT = 'X'
IMPORTING
E_QALS = P_QALS
EXCEPTIONS
NO_LOT = 1.
P_SUBRC = SY-SUBRC.
IF P_SUBRC IS INITIAL.
P_QALS_LEISTE = P_QALS.
ELSE.
CLEAR: P_QALS,
P_QALS_LEISTE.
ENDIF.
ENDFORM. " READ_QALS
Form CHECK_LOT *
Page 8
Prüflos prüfen *
FORM CHECK_LOT USING P_QALS LIKE QALS
P_SUBRC LIKE SY-SUBRC.
DATA:
L_STAT LIKE JSTAT,
L_STAT_TAB LIKE JSTAT OCCURS 0 WITH HEADER LINE.
P_SUBRC = 128.
*/Serialized Material
IF NOT P_QALS-SERNP IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 64.
ENDIF.
*/BERF
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0203'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF NOT SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 32.
ENDIF.
*/BTEI & BEND
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0219'. APPEND L_STAT TO L_STAT_TAB. "BTEI
L_STAT-STAT = 'I0220'. APPEND L_STAT TO L_STAT_TAB. "BEND
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 16.
ENDIF.
*/LSTO & LSTV
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0224'. APPEND L_STAT TO L_STAT_TAB. "LSTO
L_STAT-STAT = 'I0232'. APPEND L_STAT TO L_STAT_TAB. "LSTV
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
Page 9
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF NOT L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 8.
ENDIF.
*/ARSP & ARCH & REO1 & REO2 & REO3
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0225'. APPEND L_STAT TO L_STAT_TAB. "ARSP
L_STAT-STAT = 'I0226'. APPEND L_STAT TO L_STAT_TAB. "ARCH
L_STAT-STAT = 'I0227'. APPEND L_STAT TO L_STAT_TAB. "REO3
L_STAT-STAT = 'I0228'. APPEND L_STAT TO L_STAT_TAB. "REO2
L_STAT-STAT = 'I0229'. APPEND L_STAT TO L_STAT_TAB. "REO1
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF NOT L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 4.
ENDIF.
*/SPER
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0043'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 2.
ENDIF.
*/HUM
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0443'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 0.
ENDIF.
Page 10
ENDFORM. " CHECK_LOT
Form READ_QAMB *
QAMBs lesen *
FORM READ_QAMB USING P_QALS LIKE QALS
P_QAMB_TAB TYPE T_QAMB_TAB
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
SELECT * FROM QAMB INTO TABLE P_QAMB_TAB
WHERE PRUEFLOS = P_QALS-PRUEFLOS
AND TYP = '3'.
P_SUBRC = SY-SUBRC.
ENDFORM. " READ_QAMB
Form READ_MKPF *
Read material document header *
FORM READ_MKPF USING P_QAMB_TAB TYPE T_QAMB_TAB
P_MKPF_TAB TYPE T_MKPF_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
BEGIN OF L_MKPF_KEY_TAB OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
END OF L_MKPF_KEY_TAB.
DATA:
L_QAMB LIKE QAMB,
L_MKPF LIKE MKPF,
L_TRTYP LIKE T158-TRTYP VALUE 'A',
L_VGART LIKE T158-VGART VALUE 'WQ',
L_XEXIT LIKE QM00-QKZ.
P_SUBRC = 4.
LOOP AT P_QAMB_TAB INTO L_QAMB.
L_MKPF_KEY_TAB-MBLNR = L_QAMB-MBLNR.
L_MKPF_KEY_TAB-MJAHR = L_QAMB-MJAHR.
COLLECT L_MKPF_KEY_TAB.
ENDLOOP.
LOOP AT L_MKPF_KEY_TAB.
CALL FUNCTION 'ENQUEUE_EMMKPF'
EXPORTING
MBLNR = L_MKPF_KEY_TAB-MBLNR
MJAHR = L_MKPF_KEY_TAB-MJAHR
EXCEPTIONS
FOREIGN_LOCK = 1
Page 11
SYSTEM_FAILURE = 2
OTHERS = 3.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ENDIF.
CLEAR: L_MKPF.
CALL FUNCTION 'MB_READ_MATERIAL_HEADER'
EXPORTING
MBLNR = L_MKPF_KEY_TAB-MBLNR
MJAHR = L_MKPF_KEY_TAB-MJAHR
TRTYP = L_TRTYP
VGART = L_VGART
IMPORTING
KOPF = L_MKPF
EXCEPTIONS
ERROR_MESSAGE = 1.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ELSE.
APPEND L_MKPF TO P_MKPF_TAB.
ENDIF.
ENDLOOP.
IF NOT L_XEXIT IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 0.
ENDIF.
ENDFORM. " READ_MKPF
Form READ_MSEG *
MSEGs lesen *
FORM READ_MSEG USING P_MKPF_TAB TYPE T_MKPF_TAB
P_MSEG_TAB TYPE T_MSEG_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_MKPF LIKE MKPF,
L_MSEG_TAB LIKE MSEG OCCURS 0 WITH HEADER LINE,
L_TRTYP LIKE T158-TRTYP VALUE 'A',
L_XEXIT LIKE QM00-QKZ.
P_SUBRC = 4.
LOOP AT P_MKPF_TAB INTO L_MKPF.
CLEAR: L_MSEG_TAB. REFRESH: L_MSEG_TAB.
CALL FUNCTION 'MB_READ_MATERIAL_POSITION'
EXPORTING
Page 12
MBLNR = L_MKPF-MBLNR
MJAHR = L_MKPF-MJAHR
TRTYP = L_TRTYP
*/ ZEILB = P_ZEILE
*/ ZEILE = P_ZEILE
TABLES
SEQTAB = L_MSEG_TAB
EXCEPTIONS
ERROR_MESSAGE = 1.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ELSE.
APPEND LINES OF L_MSEG_TAB TO P_MSEG_TAB.
ENDIF.
ENDLOOP.
IF NOT L_XEXIT IS INITIAL.
EXIT.
ELSE.
*/ XAuto-Zeilen und Chargenzustandsänderung werden gelöscht
DELETE P_MSEG_TAB WHERE XAUTO NE SPACE
OR BWART EQ '341'
OR BWART EQ '342'.
P_SUBRC = 0.
ENDIF.
ENDFORM. " READ_MSEG
Form CREATE_GOODS_MOVEMENT *
Warenbewegung anlegen *
FORM CREATE_GOODS_MOVEMENT USING P_QALS LIKE QALS
P_MSEG_TAB TYPE T_MSEG_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_LMENGEZUB LIKE QALS-LMENGEZUB,
L_LMENGEGEB LIKE QALS-LMENGEZUB,
L_MBQSS LIKE MBQSS,
L_IMKPF LIKE IMKPF,
L_IMSEG LIKE IMSEG,
L_IMSEG_TAB LIKE IMSEG OCCURS 1,
L_EMKPF LIKE EMKPF,
L_EMSEG LIKE EMSEG,
L_EMSEG_TAB LIKE EMSEG OCCURS 1,
L_MSEG LIKE MSEG,
L_MSEG_TAB LIKE MSEG OCCURS 1,
L_TCODE LIKE SY-TCODE VALUE 'QA11',
L_TABIX LIKE SY-TABIX VALUE 1,
L_XSTBW LIKE T156-XSTBW.
CLEAR: P_SUBRC.
Page 13
*/QAMB initialisieren
CALL FUNCTION 'QAMB_REFRESH_DATA'.
*/Kopf füllen
L_IMKPF-BLDAT = SY-DATLO.
L_IMKPF-BUDAT = SY-DATLO.
L_IMKPF-BKTXT = 'Cancellation of QM UD postings'.
*/Ursprüngliche zu buchende Menge merken + inkrementieren
L_LMENGEZUB = P_QALS-LMENGEZUB.
L_LMENGEGEB = P_QALS-LMENGE01
+ P_QALS-LMENGE02
+ P_QALS-LMENGE03
+ P_QALS-LMENGE04
+ P_QALS-LMENGE05
+ P_QALS-LMENGE06
+ P_QALS-LMENGE07
+ P_QALS-LMENGE08
+ P_QALS-LMENGE09.
*/Zeilen aufbauen
L_MSEG_TAB[] = P_MSEG_TAB[].
LOOP AT L_MSEG_TAB INTO L_MSEG.
MOVE-CORRESPONDING L_MSEG TO L_MBQSS.
MOVE-CORRESPONDING L_MBQSS TO L_IMSEG.
*/ Referenzbeleg übergeben, falls Bestellnummer gefüllt
IF NOT L_MSEG-EBELN IS INITIAL.
MOVE: L_MSEG-LFBNR TO L_IMSEG-LFBNR,
L_MSEG-LFBJA TO L_IMSEG-LFBJA,
L_MSEG-LFPOS TO L_IMSEG-LFPOS.
ENDIF.
MOVE L_MSEG-KDAUF TO L_IMSEG-KDAUF.
MOVE L_MSEG-KDPOS TO L_IMSEG-KDPOS.
MOVE L_MSEG-PS_PSP_PNR TO L_IMSEG-PS_PSP_PNR.
*/ Umlagerungsfelder setzen
MOVE:
L_MSEG-UMMAT TO L_IMSEG-UMMAT,
L_MSEG-UMWRK TO L_IMSEG-UMWRK,
L_MSEG-UMLGO TO L_IMSEG-UMLGO,
L_MSEG-UMCHA TO L_IMSEG-UMCHA.
*/ Storno-Beleg setzen
MOVE: L_MSEG-MJAHR TO L_IMSEG-SJAHR,
L_MSEG-MBLNR TO L_IMSEG-SMBLN,
L_MSEG-ZEILE TO L_IMSEG-SMBLP.
*/ Falsch gefüllte Felder initialisieren
CLEAR: L_IMSEG-MBLNR,
L_IMSEG-MENGE,
L_IMSEG-MEINS.
*/ Bewegungsart lesen
SELECT SINGLE XSTBW FROM T156 INTO L_XSTBW
WHERE BWART = L_IMSEG-BWART.
Page 14
IF NOT SY-SUBRC IS INITIAL.
P_SUBRC = 4.
EXIT.
ENDIF.
*/ Werk/Lagerort füllen
IF P_QALS-STAT11 IS INITIAL.
IF L_XSTBW IS INITIAL.
MOVE P_QALS-LAGORTVORG TO L_IMSEG-LGORT.
ELSE.
MOVE P_QALS-LAGORTVORG TO L_IMSEG-UMLGO.
ENDIF.
ENDIF.
IF L_XSTBW IS INITIAL.
MOVE P_QALS-WERKVORG TO L_IMSEG-WERKS.
ELSE.
MOVE P_QALS-WERKVORG TO L_IMSEG-UMWRK.
ENDIF.
*/ Zusätzliche Felder
MOVE P_QALS-MENGENEINH TO L_IMSEG-ERFME.
"MOVE P_GRUND TO L_IMSEG-GRUND.
"MOVE P_ELIKZ TO L_IMSEG-ELIKZ.
*/ Kennzeichen Storno-Buchung setzen
MOVE 'X' TO L_IMSEG-XSTOB.
MOVE P_QALS-PRUEFLOS TO L_IMSEG-QPLOS.
APPEND L_IMSEG TO L_IMSEG_TAB.
IF P_QALS-STAT11 IS INITIAL.
ADD L_IMSEG-ERFMG TO L_LMENGEZUB.
SUBTRACT L_IMSEG-ERFMG FROM L_LMENGEGEB.
ELSE.
IF L_IMSEG-KZBEW EQ SPACE
AND L_IMSEG-WERKS NE SPACE
AND L_IMSEG-LGORT NE SPACE
AND L_IMSEG-UMWRK NE SPACE
AND L_IMSEG-UMLGO NE SPACE
AND L_IMSEG-WERKS EQ L_IMSEG-UMWRK
AND L_IMSEG-UMLGO EQ L_IMSEG-UMLGO.
*/ Dummy Buchung bei WE-Sperrbestand & Stichprobe
ELSE.
ADD L_IMSEG-ERFMG TO L_LMENGEZUB.
SUBTRACT L_IMSEG-ERFMG FROM L_LMENGEGEB.
ENDIF.
ENDIF.
ENDLOOP.
IF NOT P_QALS-STAT11 IS INITIAL.
*/ Bei WE-Sperrbestand und Stichprobenbuchung Zeilen tauschen
DO.
READ TABLE L_IMSEG_TAB INDEX SY-INDEX INTO L_IMSEG.
IF SY-SUBRC IS INITIAL
AND L_IMSEG-KZBEW EQ SPACE
AND L_IMSEG-WERKS NE SPACE
AND L_IMSEG-LGORT NE SPACE
AND L_IMSEG-UMWRK NE SPACE
AND L_IMSEG-UMLGO NE SPACE
Page 15
AND L_IMSEG-WERKS EQ L_IMSEG-UMWRK
AND L_IMSEG-UMLGO EQ L_IMSEG-UMLGO.
IF SY-TABIX NE L_TABIX.
DELETE L_IMSEG_TAB INDEX SY-TABIX.
INSERT L_IMSEG INTO L_IMSEG_TAB INDEX L_TABIX.
L_TABIX = L_TABIX + 1.
ELSE.
L_TABIX = L_TABIX + 1.
CONTINUE.
ENDIF.
ELSEIF SY-SUBRC IS INITIAL.
CONTINUE.
ELSE.
EXIT. "from do
ENDIF.
ENDDO.
ENDIF.
*/QM deaktivieren
CALL FUNCTION 'QAAT_QM_ACTIVE_INACTIVE'
EXPORTING
AKTIV = SPACE.
*/Buchen
CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
EXPORTING
IMKPF = L_IMKPF
XALLP = 'X'
XALLR = 'X'
CTCOD = L_TCODE
XQMCL = ' '
IMPORTING
EMKPF = L_EMKPF
TABLES
IMSEG = L_IMSEG_TAB
EMSEG = L_EMSEG_TAB.
*/QM wieder aktivieren
CALL FUNCTION 'QAAT_QM_ACTIVE_INACTIVE'
EXPORTING
AKTIV = 'X'.
*/Buchung auswerten
IF L_EMKPF-SUBRC GT 1.
IF L_EMKPF-MSGID NE SPACE.
*/ Fehler auf Kopfebene
MESSAGE ID L_EMKPF-MSGID TYPE 'S'
NUMBER L_EMKPF-MSGNO
WITH L_EMKPF-MSGV1 L_EMKPF-MSGV2
L_EMKPF-MSGV3 L_EMKPF-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ELSE.
*/ Fehler auf Zeilenebene (Ausgabe des ersten Fehlers)
LOOP AT L_EMSEG_TAB INTO L_EMSEG.
IF L_EMSEG-MSGID NE SPACE.
MESSAGE ID L_EMSEG-MSGID TYPE 'S'
NUMBER L_EMSEG-MSGNO
WITH L_EMSEG-MSGV1 L_EMSEG-MSGV2
L_EMSEG-MSGV3 L_EMSEG-MSGV4.
Page 16
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
LOOP AT L_EMSEG_TAB INTO L_EMSEG.
CALL FUNCTION 'QAMB_COLLECT_RECORD'
EXPORTING
LOTNUMBER = P_QALS-PRUEFLOS
DOCYEAR = L_EMKPF-MJAHR
DOCNUMBER = L_EMKPF-MBLNR
DOCPOSITION = L_EMSEG-MBLPO
TYPE = '7'.
ENDLOOP.
*/Sonderkorrektur für Frei-An-Frei & WE-Sperr-An-We-Sperr
IF NOT P_QALS-STAT11 IS INITIAL.
IF P_QALS-LMENGE04 EQ L_LMENGEGEB.
ADD P_QALS-LMENGE04 TO L_LMENGEZUB.
SUBTRACT P_QALS-LMENGE04 FROM L_LMENGEGEB.
ENDIF.
ELSEIF P_QALS-INSMK IS INITIAL.
IF P_QALS-LMENGE01 GE L_LMENGEGEB
AND NOT P_QALS-LMENGE01 IS INITIAL.
ADD L_LMENGEGEB TO L_LMENGEZUB.
SUBTRACT L_LMENGEGEB FROM L_LMENGEGEB.
ENDIF.
ENDIF.
CLEAR: P_QALS-STAT34,
P_QALS-MATNRNEU,
P_QALS-CHARGNEU,
P_QALS-LMENGE01,
P_QALS-LMENGE02,
P_QALS-LMENGE03,
P_QALS-LMENGE04,
P_QALS-LMENGE05,
P_QALS-LMENGE06,
P_QALS-LMENGE07,
P_QALS-LMENGE08,
P_QALS-LMENGE09.
P_QALS-LMENGEZUB = L_LMENGEZUB.
IF NOT L_LMENGEGEB IS INITIAL.
P_SUBRC = 4.
ENDIF.
ENDFORM. " CREATE_GOODS_MOVEMENT
Form POST_GOODS_MOVEMENT *
Warenbewegung buchen *
FORM POST_GOODS_MOVEMENT.
CALL FUNCTION 'MB_POST_GOODS_MOVEMENT'.
Page 17
ENDFORM. " POST_GOODS_MOVEMENT
Form POST_DATA *
QM-Daten verbuchen *
FORM POST_DATA USING P_QALS LIKE QALS
P_QALS_LEISTE LIKE QALS
P_QAMB_TAB TYPE T_QAMB_TAB
P_QAMB_VB_TAB TYPE T_QAMB_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_STAT LIKE JSTAT,
L_STAT_TAB LIKE JSTAT OCCURS 0,
L_QAMB LIKE QAMB,
L_UPDKZ LIKE QALSVB-UPSL VALUE 'U'.
*/QAMBs umsetzen (7 = VE-Buchung storniert)
LOOP AT P_QAMB_TAB INTO L_QAMB.
L_QAMB-TYP = '7'.
APPEND L_QAMB TO P_QAMB_VB_TAB.
ENDLOOP.
*/BERF & BTEI zurücknehmen
CLEAR L_STAT. CLEAR L_STAT_TAB.
L_STAT-INACT = 'X'.
L_STAT-STAT = 'I0219'. APPEND L_STAT TO L_STAT_TAB. "BTEI
L_STAT-STAT = 'I0220'. APPEND L_STAT TO L_STAT_TAB. "BEND
CALL FUNCTION 'STATUS_CHANGE_INTERN'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS = L_STAT_TAB
EXCEPTIONS
ERROR_MESSAGE = 1.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
*/Prüflos aktualisieren
CALL FUNCTION 'QPL1_UPDATE_MEMORY'
EXPORTING
I_QALS = P_QALS
I_UPDKZ = L_UPDKZ.
CALL FUNCTION 'QPL1_INSPECTION_LOTS_POSTING'.
CALL FUNCTION 'STATUS_UPDATE_ON_COMMIT'.
*/QAMB initialisieren
CALL FUNCTION 'QAMB_REFRESH_DATA'.
Page 18
PERFORM UPDATE_QAMB ON COMMIT.
P_SUBRC = 0.
ENDFORM. " POST_DATA
Form UPDATE_QAMB * -
Mapping the Follow-up action to the Usage-Decision
Hi All,
I have a the following requirement in my development:
The Usage decision needs three function-modules for the three cases of the follow-up process.
In addition to that this ,service shall have a control table in Customizing, where the customer is able to decide which follow-up action should be made. (not standard customzing). The function-module for this process is not standard.
1) Does the second requirement also require FM?
2) Please give me the steps to map the Follow-up action to the Usage-Decision in SPRO
Thanks,
VasukiHi
First create the follow up action which you want, and assign the same in QS51 t.code to your UD code group.
Thanks
S.Murali -
Error message during the usage decision
Dear Gurus,
While performing the usage decision in txn code QA11, i entered the relavant quantities in unrestricted-use.
Then when i tried to assign the UD code i am getting the following error message.
"You have no authorization for this catalog entry Message no. QS291"
But QA11 authorization is already there, apart from that which authorization is required.
Please give your inputs
Thanks and Regards
HariHi,
As the error message says Authorisation for Calatalg 3 and the related code group is missing.
When u get this message just run /nsu53 on your screen so you know which objects are missing. Maintain those vlaues or ask Basis to mainatin these values.
Regards,
Nitin -
What are the tables related to SD in PP relation tables if any
what are the tables related to SD in PP relation tables if any
SAP Production Planning Table
Demand Management
PBED Independent Requirements Data
PBIM Independent Requirements by Material
Repetitive Manufacturing
SAFK RS Header Master Data
S025 LIS -- Run Schedule Quantities
S026 LIS -- Material Usage
S028 LIS -- Reporting Point Statistics
CEZP Reporting Point Document Logs
CPZP Reporting Points - Periodic Totals
MRP Records
MDKP MRP Document Header Data
MDTB MRP Table Structure (no data)
PLSC Planning Scenario (Long-term Planning)
MDFD MRP Firming Dates
MDVM Planning File Entries
S094 LIS -- Stock/Requirements Analysis
Reservations
RESB Reservations/Dependent Requirements
Planned Orders
PLAF Planned Orders
Discrete Production
AFKO Order Header
AFPO Order Item Detail
AFVC Order Operations Detail
AFFL Order Sequence Details
AFFH Order PRT Assignment
AFBP Order Batch Print Requests
AFRU Order Completion Confirmations
AFFW Confirmations -- Goods Movements with Errors
AFRC Confirmations -- Incorrect Cost Calculations
AFRD Confirmations -- Defaults for Collective Confirmation
AFRH Confirmations -- Header Info for Confirmation Pool
AFRV Confirmation Pool
AFWI Confirmations -- Subsequently Posted Goods Movements
Classification
KLAH Class Detail
CABN Characteristic Detail
AUSP Characteristic Values
CAWN Characteristic Values
CAWNT Characteristic Value Texts
KSML Characteristic Allocation to Class
KSSK Material Allocation to Class -
AFS-QM Error in stock posting performed by taking Usage decision
Hi all,
during stock posting with 105 mov type performed by taking Usage Decision (QA11), I faced with a strange system behavior, described beneath.
Previuos steps:
Purchase order creation
Partial Good receipt performed by MIGO, mov type 103 (Blocked stock from PO)
Automatic Creation of Inspection Lot
Error encountered:
If I take usage decision (QA11) for the inspection lot created, putting the stock checked in Unrestricted Use (correspondant mov type = 105), in the following good receipt (related to the same purchase order), the incoming stock available is less of the real quantity, previously accepted..
After some checks we understood that with 105 mov type the system doubles the real quantity previoulsy accepted, acting in the following manner:
Initial PO: 100 PZ
1° Good receipt: 30 PZ
(automatic creation of inspection lot)
If we take a usage decision, posting stock to unrestricted use (mov type 105), in the 2° Good receipt, the quantity available from the same PO is not 70 PZ (100 - 30), but only 40 PZ ! ! (100 - (30 * 2)) = 40
Please note that it does not occur if we post stock (always 105 mov type) with a MIGO transaction, so we are forced to think that the problem is strictly related to AFS-QM inventory posting, and not to 105 mov type or inbounding process.
Thanks for your collaboration,
Regards,
AleI'm not familiar with the specific apparel and footwear solution but with regards to QM, if you are using the standard SAP delivered stock postings, it should use 105 to accept the material to unrestricted for the GR blocked.
I would first use MB51 for the material and batch and review all the material movement documents. Look at the trail of movements and try to see where the changes happen.
In your example, what did the unrestricted inventory and GR blocked inventory show as stock levels?
I'd also check OSS for issues related to AFS/QM. This is not new functionality in SAP so I would be surprised if this was an actual bug or problem in the system that hasn't been seen before.
FF -
Usage Decision IP address / Terminal Number
How to get Usage Decision IP address / Terminal Number?
Hi Vivek.
Just a note, your posting was reported as probably being in the wrong forum and more suited to a BASIS or security forum. But the question is about UD's so it's a borderline call for me so I left it.
Now, as far as the question goes, I don't think what you want is possible without modifications. There is no log tracking IP address for when a UD is given. I.e. the IP address is not stored with the UD administrative data anywhere. So once the user logs off, any chance of getting that data would be zero.
I do know your BASIS or security team can definitely get the IP address for user's online and depending on what they are recording and monitoring, they may have logs but probably not directly related to the transactions used.
This discussion has a lot of info in it: SAP User Login Transaction code History details
The trick will be to capture the info and store it some where. My suggestion might be to utilize a user exit when the UD is saved, and use the FM "TERMINAL_ID_GET" to get the IP address. (Note: I have not personally done this or used that FM, but I am told that it will return a user's IP address), then store the IP address in the UD long text.
Craig -
EWM with QM -Inspection label not getting printed after usage decision
Hi Experts,
We checked configuration settings related to this but we could not find missing configuration. Right now we are not able to print label after we take usage decision. Please let us know your inputs on this.
We are using /SCWM/QINSP for usage decision.
Thanks & Regards,
PrashantWe changed the printer name in condition record and we could print the label.
Regards,
Prashant -
Serial Numbers in QA11 Record Usage Decision
Hi all,
We are using the serial numbers scenario in goods receipt. The user has to enter the serial numbers of the equipment/devices at the time of preparing goods receipt in MIGO_GR against a purchase order. An Inspection Lot is generated after posting the goods receipt. The has to prepare the GR approx 5000 nos. of material in each goods receipt.
Usage Decision has to be recorded for all these 5000 serial numbers in a particular inspection lot. Once we run the Tcode : QA11 and enter the quantity to be posted to blocked stock as 5000 and click on the save icon.
The system throw a screen for selection of serial numbers for which the usage decision is to be recorded. On this screen, all the 5000 serial numbers entered in the inspection lot should be available for selection. But the system sometimes shown only 5, sometimes it shows 2500, sometimes 1000 nos. for selection.
Please suggest if this might be due to some configuration problem or due to constraint of memory in the lock table in SM12. We are facing the same problem while processing the goods receipt for 5000 nos. through a BAPI.
Thanks in advance.
AJHI Anand,
Thanks for your immediate response. You have perfectly understood my problem. The following are the clarifications for your queries :-
Point No. 01 : We are posting the entire quantity (5000 nos.) to blocked stock. We enter 5000 in the To Blocked Stock field of Inspection Lot quantity Tab of the Inspection Lot. After entering the quantity we click on the Save button to post the Usage Decision. A pop of the serial numbers for select is given after clicking on the Save button. The serial number pop up is given if we try to process the usage decision for full quantity of 5000 nos. But sometimes if we put a smaller quantity say 20 nos. then the popup is not given and the usage decision is successfully posted for 20 nos. So the system behaves very randomly.
Point No. 02 : The serial numbers displayed for the selection is also random say sometimes 13/5000, 2500/5000, 0/5000.
Point No. 03 : I have checked the SER03 and OBJK tables and all the 5000 serial numbers are allocated to the material document.
We already have escalated to SAP, but do you feel there is some configuration issue for the same. Please give your valuable suggest.
Thanks in advance.
AJ -
Typed tables is treated in the same way as a relational table?
I'd like to know if the internal struct of oracle treats a typed table (table that contains object) in the same way of a relational table. For example, if I insert an object (that contains the atribute name as varchar2) into a typed table, and insert a regular register (name as varchar2) into a relational table, theoretically the execution time for both inserts must be the same? Thanks.
> I have written my comments from my experience.
I have used nested table with more 10+ levels with
more than 400+object types for our projects.
As you know bench mark is not done for 1 table or 1
object, it is done with major project usage .
In which case you're not benchmarking a specific feature, but the overall design of the system.
I too am using object tables for specific Oracle applications. And the advantages that this provide significantly outweigh the cons - and a single such application process in excess of a billion rows per month per object table per month.
> If you think Object is faster than relational tables
in oracle then JAVA MUST BE FASTER THAN 'C' Language.
Where did I say that object tables are faster than relational tables? How about trying to read what I said and then trying to understand what I conveyed?
I said that
a) objects tables are marginally slower than relational tables
b) this performance difference cannot be used as the primary deciding factor on whether to use object tables or not
As for your analogy that then "Java must be faster than C" is not relevant. Comparing apples with bananas. C is not C++. Java p-code is not machine code. So your analogy is meaningless and does not prove anything. Fact is that the speed of any programming language depends on numerous factors - and not just the language itself as you're are implying with this flawed analogy.
Besides, trying to compare ADTs in Oracle to Java Classes, is silly. These are different tools intended for different usage.
Bottom line - saying that ADTs and object tables in Oracle is "Bad" based purely on a marginal performance difference is idiotic. The design of the system and requirements of the system dictates the tools that are needed. And one of those tools can be and will be ADTs and object tables in certain cases. -
Dear Friends Can anyone please send me BP related Tables to me? either here or by E-mailing me plzz...
My e-mail ID is [email protected]
Many thannks and regards,
Lata.Hi Lata,
There are multiple BP related table in CRM. Below is a list of the table with some descriptions.
BUT000 BP: General data I
BUT000_BCS Persistence of a BAS Address
BUT000_EBP_G able for Lock Object EBP_G
BUT000_TD BP: General Data I, Shadow Table Time Depe
BUT001 BP: General data II
BUT010 GP: old, do not use ==> BUT020
BUT020 BP: Addresses
BUT021 BP: Address usages
BUT021_FS Time-Dependent Address Usage
BUT030 BP Where-Used List: Usages
BUT030G BP Where-Used List: Generic Nodes
BUT030GT BP Where-Used List: Generic Nodes, Text
BUT030T BP Object Usage: Application Table, Texts
BUT050 BP relationships/role definitions: General
BUT050_CD BP Rel./Role Determination:Index Table for
BUT051 BP Relationship: Contact Person Relationsh
BUT052 BP Relationship: Addresses
BUT053 BP Relationship: Company Interest
BUT054 BP Relationship (not used yet)
BUT0BANK Business Partner: Bank Data
BUT0BK BP: Bank Details
BUT0BK_SHD Shadow table for BUT0BK (IBAN only)
BUT0BKU BP: Bank Details Usages
BUT0CC BP: Payment Cards
BUT0ID BP: ID Numbers
BUT0ID_BIP_NOHIT Business Information Provider: Logging of
So it is not the complete list. You can search for more tables in SE11 using the search key as BUT*.
Thanks,
Samantak.
Rewards points for useful answers. -
Dear All,
I have following queries which needs to be clarified.
1. In the results recording level after recording we give valuation as Accepted or Rejected. But what ever the valuation (Accepted/ Rejected) we give in results recording, in the usage decision level we can give valuation as whatever we like. whats the relationship between results recording level valuation and usage decision level valuation?
2. How do i make in the usage decision if i give valuation as rejected quantity to be posted to Scrap or stay in Quality Inspection until re inspection is done? If i have to maintain a status profile for that can some one detail the steps?
Thanks and Regards,
DTD1. In the results recording level after recording we give valuation as Accepted or Rejected. But what ever the valuation (Accepted/ Rejected) we give in results recording, in the usage decision level we can give valuation as whatever we like. whats the relationship between results recording level valuation and usage decision level valuation?
Hi
There is no relation between RR ,DR & UD which you take.
as you rightly said even if RR valuation is Reject you can Accept lot in UD.
This is std sap
if you want that after any char is rejected then UD should be rejected then use
user exit:
QEVA0010 UD: Usage decision check
2. How do i make in the usage decision if i give valuation as rejected quantity to be posted to Scrap or stay in Quality Inspection until re inspection is done? If i have to maintain a status profile for that can some one detail the steps?
The simplest way you can do create a selected set with code AH: Hold QI lot.
This means UD is taken but stock posting is still pending with QI
Status profile will help you but this will make thinks more complecated.
Regards
Sujit -
Regarding problem with updating usage decision in QA11
Hi Experts,
I am trying to use the Bapi "BAPI_INSPLOT_SETUSAGEDECISION" to update the usage decision in QA11 in a proxy. I am not being able to understand what parameters to be used and how.
CALL FUNCTION 'BAPI_INSPLOT_SETUSAGEDECISION'
EXPORTING
NUMBER = INPUT-SAP_USAGEDECISION-DETAILS-UD_INSPLOT "inspection lot no from the proxy structure.
UD_DATA = lw_data
LANGUAGE =
IMPORTING
UD_RETURN_DATA =
STOCK_DATA =
RETURN = li_return
TABLES
SYSTEM_STATUS =
USER_STATUS =
Please help.Hi,
Just pass the inspection lot number to the field NUMBER and try, because there are no standard programs in which this FM is called apart from a Business Object BUS2045, it is called in the method InspectionLot.StatInterface.
You can check that for any clarification, but it is not clear there as well.
Thanks,
Mahesh.
Maybe you are looking for
-
Have been trying to find info on upgrading the mSata drive on my Mac but some people say it is possible as others say its not. Wondering if anyone else can provide their own input. I am looking at the Samsung 840evo 500 GB mSata drive and want to kno
-
about 6 months ago i was trying to unlock my phone. my passcode for everything has always been the same 4 digits. i unlocked the phone twice in the space of 10 minutes to reply to text messages by the time id checked my phone again my passcode no lon
-
Can you permanently fix or render audio so it can be moved?
I'm trying to add 2 audio tracks to a sequence to make a total of 4 audio tracks. Every time I move one of these audio tracks, I have to render it again to find out what I have, else I get a bunch of beeps. Is there a way to render or import audio fi
-
JDBC Adapter - Multiple Table Update - Sequence Number
I have to design a integration scenario where I will be updating 4 tables in a oracle database. One of these tables is a header table and the rest are detail tables. I have to generate a sequence number using Oracle Sequence number object which is on
-
10.6.5 Mail - Crazy Account Disappearing Problems on 2 machines!
My mail on my MacPro started crashing yesterday. Mail accounts (POP and Apple) disappeared. I replaced the mail.plist file and all's well, for like 5 minutes. Then one account or two would disappear, or maybe all. Then I noticed the same thing was ha