Usage? help!!! lol

why cant i see all numbers texted on my usage summary?

This question comes up often - and there are a few reasons why the numbers texted aren't showing up on your summary.
First, there is a delay sometimes in Verizon's reporting of the numbers online - they could show up within fifteen minutes and there could be a delay of 24-48 hours.
What phone are you using to text? If it's an iPhone and you use iMessage, the texts will show up as data and you won't see the numbers. For that matter, if it's a smartphone app that is doing the texting, the numbers will be available on the phone, but may or may not show up in the usage detail on the bill, depending on how the app is structured.
The numbers will show up if you are doing straight texting through the Verizon network, but using any kind of texting app on Android or iOS, or BBM on BlackBerry, you may or may not see the numbers on your summary.

Similar Messages

B1DE usage help file

hi every one,
                 Can any tell me VB-B1 addon wizard detailed usage help file
                  SAP-B1 addon installer.net wizard detailed usage help file
                  VB-B1 addon istaller setup.net detailed usage help file

Varma,
Apologies ... I am not sure what you are asking. When you install the Business One Development Environment, you get Help File, Documentation and Class Reference Help File icons added to the B1DE Program Group as well as there is a "B1DE.doc" Word document placed in ...
..\Program Files\SAP\SAP Business One Development Environment
This is all of the information on B1DE.
Eddy

K8NGM2-FID problems: no usb and high cpu usage - HELP!

hi folks,
i've setup K8NGM2-FID inside an htpc with a clean install of mce 2005 (onboard video). For the past couple of days I've noticed a few things:
1) if the pc goes into standby (S3) and then wakes up, sometimes task manager shows a cpu usage of 50% (on the graph) but looking at the list of tasks (for all users) nothing is runing that high - in fact system idle process shows 98% (while the graph is still showing about 50%) and the system is a bit sluggish; reboot fixes this but it's getting really annoying. I've installed the latest AMD x2 driver. Sometimes it goes to 98-99% after waking up but that's been rare.
2) i've been getting a few BSODs lately, actually all started yesterday - 3 of them in a span of about 2 hours after insalling Nero. I'm going to try to figure out what is causing it that (proabably Nero - I hope since that's easy to undo) but what i've noticed is that when the system reboots after the blue screen, none of the USB devices work (i.e. keyboard, mouse, etc.). windows has to load, then I need to go in the back and unplug/replug the usb devices which then 'wakes' them up; this can get really annoying in a typical cramped home theater setup. software restarts seem to be good - ok hardware restarts are the problem. hooking things up to a usb hub has the same effect - i.e. I need to re-plug the hub to get them to work - it just means less things to plug/unplug.
has anyone else noticed this? help save my sanity - this is driving me crazy. since this is an mce setup, it goes into sleep and wakes up several times a day so the high cpu issue when it comes up really gets in the way of using the pc. btw. during high cpu times, no mce related function (record/watch/the shell itself) is running.
here's my setup:
K8NGM2-FID - boots up with 3 short beeps - I think it's 1 beep pause then 2 beeps
2 gigs kingston 3 CAS (2 x 1 GIG kit) pc3200 - boot screen shows it running at 400mhz in dual channel config
X2 3800+ stock fan/heatsink with silver 5 (runs around 35-38 idle - inside a silverstone 'stereo rack' case)
ms usb keyboard/mouse/mce remote
coolmax 550W power
3 140GB WD drives (ata 133 - not sata)
onboard video - framebuffer set to 128megs
latest (as of 2 days ago) nvidia and msi drivers - msi bios is the stock 3.0 (more on that later)
the bios settings are all default as far as I can tell.
pvr-150 tuner card
promise ata 100 card
nec 3500dvd
all running on mce 2005 with rollup 2 and all the updates windows could find
i haven't updated the bios because i've read about other folks having blue screen problems and the suggestion has been to up the voltage for the ram (I guess the default setup from MSI is lower than it should be) but apparently that option is missing from the 3.1 and later bioses? and reading the text file, it wasn't very apparent what the bios 3.1 was fixing other than a few cosmetic bootup texts. I'm planning to up the voltage later today.
anyhow, any suggestions short of throwing the entire pc out the door are welcomed.
thanks!

ok here's what I've found about the high cpu...
using process explorer, hardware interrups is taking all the cpu. i've tried to disable items one by one but nothing is working so far. what does work is if i choose scan for new hardware, cpu goes down to normal. standby and resume and cpu is up again. do the scan and it goes down again - without changing anything.
i've re-installed the graphic board driver, nvidia 430 drivers, sound driver. not sure what else to do. checked my drives and they are all properly master/slave set.
this is really getting crazy...anyone come across this?
i'm a bit hesitant to go to bios 3.1 since i've seen lots of posts about BSOD and i've just gotten rid of that.
thanks
thanks a bunch!

SBS 2011 - High CPU usage - Help me Microsoft forums! You're my only hope!

My company supports a client that has a SBS 2011 server. For about the past year, we've been fighting a recurring issue with performance on this server. There are about ten local users and four remote users. The server's CPU idles at
about 60%-80% but is usally running when under *any* load from 80%-100%. If you do anything on the console, it will stay pretty much at 100%. These are not power users by any means. The server is utilized for file/printer sharing, Exchange
2010, and one flat file database application (non-SQL). SharePoint is not utilized.
Needless to say, our client is frustrated. When opening files, using their database application, or doing anything Exchange-related, there is a large amount of lag on the client side. First, here are the server's specs:
Make:Dell PowerEdge T420
OS: SBS 2011 Standard SP1
CPU: 2 - Intel Xeon E5-2407
Memory: 32GB
RAID: RAID 1 - Operating System (C:)/Data Volume (E:) | RAID 5 - Data Volume (D:)
Here is what we have tried to resolve this to finality:
* Doubled resources - Initially the server had a single physical processor and 16GB of memory. While these specs alone should have been fine, and were fine when the server was installed, we had periods of time where the server would just sit all day at
100% usage. We doubled the resources and while this seemed like it would fix the issue, we are still seeing abnormally high processor usage.
* Removed all monitoring tools, antivirus, and backup software - As part of our testing, we removed our monitoring agent (LabTech) and antivirus (GFI Vipre). Mozy is utilized for an off-site backup so that was disabled. No dice.
* Verified updates - We made absolutely sure the server was 100% patched.
* Malware/Virus/Rootkit checks - We have ran scans checking for any potential issues with security.
* Ran MBSA and MBCA to fix any issues with the server's configuration.
There is no single process which is using all of the CPU, or we would simply be able to narrow it down. Our calls to Microsoft support have yielded no answers. The last call ended with Microsoft stating that a SBS server should always be running
at high CPU usage. Meanwhile, we have many other clients with less-beefy servers, with more users, who have no issues like these.
So, I'm turning to you all. I will gladly provide logs, configuration settings, even remote assistance sessions if you all can help shed some light on what might be causing my issues.
Thank you!

Some comments/ideas:
How long was the server running after this screenshot? I ask because store.exe is only got a 1GB of RAM which is really low - it should grab most of the RAM within a few hours.
The server was up for about 12 hours. I believe an adjustment was made before to limit the Exchange memory usage.
Strange that SearchIndexer (wsearch service) is so high although that may be a startup condition.
The LT* processes seem to be a 3rd party monitoring tool - no idea why it would ever need that much CPU though (I thought you disabled this?).
We had, but we cannot go forever without monitoring our client's server. It has been pulled off in the past and results on performance are pretty much the same.
The taskmgr process run by amnet_admin has used a lot of total CPU Time. What is it? (can't see the command line).
That's the user I was logged in as when I took the screenshot. Even the task manager seems to eat up the CPU.
The sqlserver process right above it is also busy - may want to look at the command line and figure out which SQL database that is (SBS has 3 - WSUS, Sharepoint, and SBS monitoring)
I believe that's the SharePoint database. They don't currently use their site. Would you recommend a removal and reinstallation? I would not completely remove as I know SBS doesn't like you removing parts of the complete package.
Strange that vds.exe is 10% - that is the interface to the disk management interface IIRC. Perhaps your monitoring service has gone awry here - definitely lose it.
I'll see about pulling it off and I'll see if there are any improvements.
-- Al

Display memory usage-help for parameters

hi everyone ,
i want to display the memory usage(shared memory+heap) while compiling the t code in foot path,
plz help me for this issue

Hey Arun,
RZ20 SAP CCMS Monitor Templates->Performance Overview->Memory Management
You can see all the information which you are looking for.
But to make it web enabled you need to call some BAPI through java and store it DB. If you have any Java programmer let me know I will send you the list of BAPI.
Use the DB data and draw a graph. Using that data you can study the performance over a period and start tuning your system.
Thanks & Regards
Vivek

Im unable to remove songs by swiping left from right or deleting the usage. help please?

I updated my phone to ios7 a while back and manage to fix majority/most of the bugs. Now the music is messed up. i've already tried the swipe thing and deleting the usage and nothing has work. Some of the songs wont come off my phone and i dont know how else i could remove it. Help?

my phone started playing a song randomly while it was tucked away in my bag and I was in a crowded elevator. It was very embarrassing.
Yes, that Barry Manilow elevator music is a bit embarrassing (sorry, just couldn't resist that).
Have you tried resetting your iPhone in iTunes and then restore just those items you want back?

HT1414 hi yesturday i tried to put photos of my phone,and its frozed on me,on the screen its got itune logo,with a cable on the screen,ive tried to switch it of but it goes on again,i cannot use the phone,please help lol

Hi yesturday,i was tranfering my photos of my phone to my computor,and the phone has froze on me,i cannot switch the phone on or of,what i can see on the screen,is the itunes logo with a cable on the screen,its looks the one you put the cable into one of the ports,there is no way possible to switch of or on please help,im stressed out lol,thankyou francis01224

Aug 15, 2012 8:28 AM (in response to EricaP1234)
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

8220 flip phone help lol

Lol ok call me stupid.... but is there a way to set ringtones to contacts so when you recieve a text message it plays a different rintone? I can do it for calls but not messages.... and this is really bugging me..... PLEASE HELP ty >.<

http://www.blackberryfaq.com/index.php/How_can_I_personalize_my_alerts_from_specific_contacts%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPod usage help

Hi
I want to know how long your battery lasts for my iPod touch 4g battery I think gives me around 6 hours usage for half the time for you tube videos and the other half internet use.Is this normal
Thanks

try disconnecting the ipod from your wifi, then reboot your ipod, then connect it again. hope this helps!

160GB (Video Playlist Usage Help Request)

Hi all... first time posting here... first time here.
Anyway, I've got a 160GB iPod Classic. I finally placed some videos on it and promptly made some playlists through iTunes.
My problem is that I can only play one video at a time and when it finishes it starts over again (never moving on to the next video in the playlst). Also, I can't seem to skip to the next clip using the >>| key. I can fast forward or pres |<< to reset the video though.
I've noticed that when I try to play the playlist outright by pressing the >|| on the playlist (vs going to the clip as I did above), the playlist will show an "audio note" icon and then says "1 of 0" and scrolls the title of the clip but never plays the clip.
Is there something about setting up a video playlist I'm missing? Or did I make a mistake by placing all my clips into the "movies" section and then making playlists through iTunes (they all showed up mixed in with the audio playlists... but are showing up correctly in the "video playlists" section of my iPod)?
I guess I assumed I could play my video clips just like my music and my music playlists... by skipping to the next clip, making a playlist and even shuffling that playlist to get "random episodes" to play.
Am I wrong to think that or have I simply done something wrong with creating my lists or syncing the iPod.
If it helps the clips/video are in the "M4V" format.
thanks for any tips or help,
TK.

Thank you for the reply... I'm still having trouble though.
I can't seem to find the "options tab" you spoke of so I can't go any further than that.
This is what I've done so far:
Got the videos in the M4V format for iPod...
I then moved/copied them into my directly onto my iPod through iTunes, the files synced and they show up on my iPod...
I then made playlists by right clicking my iPod and using "new playlist"...
I then selected the clips I wanted for each playlist and moved/copied them to the playlist I wanted...
I then removed my iPod from my PC and am able to play any of the clips either by going to the "movies" section or by going into my "video playlists" section, but I can only play one clip at a time and at the end of the clip my iPod only restarts the same clip. I can't skip to another clip and the playlists themselves don't play as described above. In order to play another clip I have to back out of the current clip using the "menu" button and then select a new clip.
In iTunes when I right click on any of the movies I only get the following options: Get info, rating, reset play count, reset skip count, uncheck selection, mark as not new, show in playlist, copy, delete, apply sort field.
When I right click a playlist I get the following options: copy, eject, copy to play order, transfer purchases, reset warnings, delete.
I also checked all the "file, edit, view, etc" top bar options and couldn't find anything relating to "skip during shuffle".
Lastly, I've double checked my iPod settings and it appears that all my playlists are setup to shuffle and repeat.
I'm still willing to try what you said if I can find it, lol.
Here's my iTunes version: 8.0.2.20
Here's my iPod software version: 1.1.2 (iPod Classic 160GB with 148.79GB free currently).
thank you again for any more suggestions or tips,
TK.

IPhone data usage help

Hey gang
I need your help please.
I am in Mexico and have an iPhone with a 150 MB data plan and 300 minutes. My carrier says that I have passed my data limit and owe them around $150 usd. According to the Cellualar Network Data on my iPhone, I have used 35MB and 83 minutes (Settings > General > Usage).
My question is, is this information technically good enough to fight back these charges? I think it must be, but I have to be sure. Can you help me, please?
Why I don't have an unlimited data plan? because it costs around $110 usd a month, that's why. My current data plan costs about $55 a month.
Thank you

Joe.pm,
I don't think the info in Cellular Network Data is good enough to contest those charges for two reasons:
1. you could press the reset button and set the counter to zero
2. if you restore the iPhone, it will also reset the counter to zero.
But, its definitely worth trying to fight back those charges.
Good luck

Info Spoke - Process Chain - OS Command usage help

I am new to BW. My requirement is to extract the master data off of BW data targets on a weekly basis and ftp the files onto a different server.
To meet this requirement, I am planning to create InfoSpoke(s), put it in a Process chain and using the OS Command ftp the files to different server.
Is this the right way to do it or are there any better ways? If it is, I need help on where to give the target server name, user_id and PSW in the OS Command variant of Process Chain.
Also, is it possible to schedule a Infospoke directly from the scheduler (Auotsys...) and still execute weekly/monthly?
Thanks for your help in advance
RK

That's correct. You'll define the command under the general services tab in the process chain transaction (It's labeled OS Command and is a silver circle thing with a blue dot in it).
When you drag it into the process chain it will ask for a varient. In the System Command field for this varient is where you'll define the actual command. (little pencil button next to it). At this point you can call a script that does the copy or call an actual command that does the copy.
Might be easier to control with a script that does the work but if you want to call rcp/scp, the os command will be rcp and parameters will be the filename, etc. If it's a script then you'll just enter the name of the script in the os command field.
Hope this helps.
-bill

Question about hard drive, need help lol.

Hey I'm kinda new to the MacBook world and have a stupid question. I am getting a late 2009 MacBook unibody (white polycarbonate, model MacBook 6.1... I believe) I am switching the original 250gb 5400 rpm hard drive out for a Seagate Momentus XT 750gb 7400 rpm hybrid hard drive. I want to keep everything on the original hard drive and just pop the new hard drive and start fresh with Snow Leopard. I'm going to purchase the SL cd from apple but I do not have the original grey start up cd that came with it (my girlfriends little sister lost it). Do I need to call apple for that cd in order to start fresh on my new hard drive or is everything I need on the SL cd?
Also how do I go about wiping the whole computer when I put the hard drive in and use SL? I want to essentially have a completely clean laptop with a new hard drive.
Thanks for your help in advance.

The SL disc you get from Apple will do everything you need. When you nstall the new hard drive there will be nothing to wipe, the drive is the only piece of that Mac hat stores anything so you don't need to worry about that. Post back and let me know how that hybrid drive works out....I'm interested.

Property file usage help please !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

hi there
i need some help on using property file, please. i have a package that contains many directories and classes. in one the directory, there is a property file: properties. and some of the classes need to access information in the file. how can i use ResourceBundle or Property objects to read the file? this is my guessing :
//code....................................
ResourceBundle.getBundle("D:\\tomc\\wowExchangeProject\\soaptest\\src\\com\\wowgao\\uddi\\db\\properties.properties").getString("implementation");
and:
//code....................................
File f=new File( configFile );
if( f.exists()) {
Properties props=new Properties();
props.load( new FileInputStream(f));
DBClassName = props.getProperty("implementation");
i must use absolute path for the file. what if i need to distribute the package on other machine that does not have D drive. how can change it so that i can deploy it on any machine? thanks

hi there
i need some help on using property file, please. i
have a package that contains many directories and
classes. in one the directory, there is a property
file: properties. and some of the classes need to
access information in the file. how can i use
ResourceBundle or Property objects to read the file?
this is my guessing :
//code....................................
ResourceBundle.getBundle("D:\\tomc\\wowExchangeProject\
soaptest\\src\\com\\wowgao\\uddi\\db\\properties.proper
ies").getString("implementation");
and:
//code....................................
File f=new File( configFile );
if( f.exists()) {
Properties props=new Properties();
props.load( new FileInputStream(f));
DBClassName =
ame = props.getProperty("implementation");
i must use absolute path for the file. what if i need
to distribute the package on other machine that does
not have D drive. how can change it so that i can
deploy it on any machine? thanksHi!
Let�s say you have the following structure:
- com/props/props.properties
You can use any class inside the classloader that loaded this package to do the following:
InputStrean in = <classname>.class.getResourceAsStream("/com/props/props.properties");
Properties props = new Properties();
props.load(in);
Hope this can help you. Any doubts just ask!
MSB

Time capsule usage help?

I find a multitude of info and help regarding time capsule setup.
I must be searching incorrectly but I am now trying to use the time machine to restore a couple of files.
Where do I find restore help?
PS I have the fles on my camera chip, but I'm now concerned that after being diligent with religous use of the time capsule, that I can't really use the data saved for a restore which after all is why I do this in the first place. I must really be dense. An

Finding files depends on how and where you saved them.. generally you cannot find a single photo in iphoto for example.. it is a single database.. and can only be found by restoring the whole database.. so don't abuse yourself.. it can be difficult if you don't remember a raw file name to find it.
the best resource in all the world is Pondini's great KB of all TM information.
Look at Q14-17 which covers restore.. in its myrid forms.
http://pondini.org/TM/FAQ.html
There is specifics about iphoto here.
http://pondini.org/TM/15p1.html

I need help lol

ok i just got my phone and im concerned/confused on the internet usage stuff.
I havent used the internet cuz i dont need it on my phone i have BBM and Social netowrks as a plan on my phone but i accidently clicked on something in twitter and it took me to an internet browser on my phone i closed it right away since i dont have a plan package for internet do you think it will charge me??

If browsing isnt included in your plan then its very likely you would have been changed. However, it was literally opening one web page I cant see the charge being very much.
Your best bet is to contact your carrier and see if they can advise you were charged.

Usage? help!!! lol

Similar Messages

Maybe you are looking for