Usage lines got expired even end date is future date

Hi ,
We have Service Contract which Usage Line has been expired(status is in EXPIRED) even its end date is future date.
Other Usage lines and Service Lines are in Active status.
When I checked the lines through backend,we identified that it was updated by program
Contract Status Change by Range..
But as per program logic,it should not update the status of Usage line which end date is future date.
Is there any way to update the end date of the Usage line to date which is less than sysdate then make it expire and then update it back to original end date of usage line(future date)
Could anyone let me know if there is any provision or possibility.
Thanks in advance
Satya340

YOu can not create data that does not exist.
You will need to add in a table which has all dates and make that you first table with all other data joined with a left out from this date table.
Ian

Similar Messages

File Modifications Date as Future date

Hi Guys ,
I am creating Installer from PackageMaker for java Application. Windows Installer is done. "LOCALES.jar " file holding future date in 2040 .You can see it from the screen shot. But same file when i transfer to mac it doesnt stay that date. is there any way assign the future date for perticuler file. I tried to change the computer date and do the modifications . But seems like it does not correct way. in windows the developer changed the computer date and it holding the that date in future "2040".
Thanks in Advance
Lakshan

Seen these?
Applet Caching problem (Applets forum at JavaRanch)
Java Applet not caching - Stack Overflow

FileModification date as Future dates

Hi Guys ,
I am creating Installer from PackageMaker for java Application. Windows Installer is done. "LOCALES.jar " file holding future date in 2040 .You can see it from the screen shot. But same file when i transfer to mac it doesnt stay that date. is there any way assign the future date for perticuler file. I tried to change the computer date and do the modifications . But seems like it does not correct way. in windows the developer changed the computer date and it holding the that date in future "2040".
Thanks in Advance
Lakshan

https://discussions.apple.com/community/developer_forums?view=discussions

Billing Date picking future date

Dear All,
We have a issue when the billing document is created it is picking one day ahead of the current date, ex. current dt is 11.10.2010 it is taking 12.10.2010 our client is using SAP system time as CET and OS level time is IST.
VTFL - Copy Control routine is - 011(Bill. date= Today) and pricing type is - C
Please suggest if you have encounter such issue.
Regards,
Ashish S.

Dear All,
After applying note 1124661 the system reaction is corrected to use the user time zone instead of the system time zone.
All you need to do is Set in T.Code - SU01 user time zone to local time zone of user who is creating the billing document.
and then apply the Note - 1124661 which force the system to pick the all business transaction date/time of user and not of central system data/time.
Regards,
Ashish s.

O4NM or O4TEN Create & Actualize a Ticket with future date

Hi,
I would like to create a ticket with future date; in the tab 'Movement Details'....'Start Date', 'End Date' & 'Posting Date'.
Example: Ticket to be created with the start & end date as 05/20/02008.
System throws error : Cannot actualize a ticket for a future date or time.
Please suggest.
Thanks
Parveen

Hi Sandil,
During the ticket creation, when I'm entering the 'Start Date' and 'End Date' with a future date eg 05/30/2008; getting the error.
The requirement is to create & actualize the ticket with dates 'Start Date', 'End Date' and the 'Posting Date' with future date.
FYI, there is a significant number of tickets that are booked using end of the month date in order to avoid several fees. We also have to do closing and reconsolidations end of the month. These activities create a significant stress to complete tasks before deadlines. Along with that, we also have to complete ticketing that we scheduled for end of the month. Therefore, resolving the issue of been able to ticket and actualize tickets ahead of time would substantially make processes and procedures easy when we are stretched for time which we don't have towards the end of the month.
Please suggest.
Thanks
Parveen

Set List datefield to future date and disable all date behind current date?

Is it possible to set date to future date (atleast 2 week) and all prior date should be grayed out . User will not able to select behind current.
Is it possible with OOB option. JQuery work around also fine.
ItsMeSri SP 2013 Foundation
ItsMeSri SP 2013 Foundation

FutureDate - datatype will be Datetype as Calculated column formula 'Today+14'
please 'Propose as answer' if it help you, also de-mark it if it didn't. Thank you!
Also Place a validation rule as below which will restrict all previous date
[FutureDate] > (Today()+14)
User cant save that item if future date is not greater that today play another 14 days.
Hope this will help !
please 'Propose as answer' if it help you, also de-mark it if it didn't. Thank you!

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back

Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

HT1918 revised credit card expiry date not updating on my account, warning box says card has expired even after i change the details and security code. anyone know how to correct this?

has anyone experienced this i want to update my card details on my account but it says card expired even when i put in the new expiry date and security codes.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then edit your payment details.
If that doesn't help, tap Settings > General > Reset > Reset All Settings. Then try again.
iTunes Store: Changing account information
iTunes Store: Accepted forms of payment

End of contract questions (Data plan and upgrade eligibility)

Hi All,
I found another thread also titled "End of contract questions" and it was very helpful but I want to make sure I'm not mistaken in any way. Here's my scenario:
2 Line Plan
ME (primary): 2-year contract, unlimited Data (10/15/10 - 10/15/12)
WIFE: 1-year contract, unlimited data (10/15/10 - 10/15/11)
I signed her up for a 1-year contract on the advice of the Verizon rep that was helping us. It ended up netting an additional cost of $70-100 (I forget exactly) but it was worth it in my opinion because I knew that one of us would be able to get a new phone in 1 year as opposed to 2.
So here are the specific questions:
1. Verizon has done away with 1-year contracts. This means that whenever my wife goes in to renew her contract (and get a new device), she will need to sign a 2 year contract, correct? All further questions will be posed based on a "yes" answer to this one.
2. Assuming she has to sign a 2-year contract, will she still be able to retain her unlimited data plan?
3. Assuming she signs up for a 2-year contract, will she still be able to get "loyalty" pricing or whatever they're calling it now (used to be "new every 2")? Is she even eligible for anything since she's not the primary on the line?
4. In the other thread titled "End of contract questions..." it was mentioned that "The loyalty discount expires 6 months after it becomes available -- so 2 months after your contract ends". Is this correct?
5. Currently, if I go to MyVerizon and hover over the "?" next to my number and "Eligible for a discount" it says: "You are eligible to upgrade with discounted pricing. If you upgrade on or after 6/15/12 you are eligible to receive an additional loyalty discount. " I intend to wait for my line as it still has a year on the contract however when I do the same for my wife's line it says: You are eligible to upgrade with discounted pricing." Does it not mention the Loyalty discount because it's not applicable to a secondary line? Or perhaps because it's implied since she's technically out of her contract period?
I'm trying to make heads or tails of this. At the time, it sounded like a great idea (her on a 1-year, me/primary on a 2-year). I'm hoping it will work out for us so that every year, one of us will be eligible for a new line. I'm only concerned with the unlimited data aspect being that she's going to be going from a 1-year to a 2-year and also the actual loyalty/discount aspect.
Thanks in advance for anyone who helps!!

Leonard1818 wrote:
Hi All,
I found another thread also titled "End of contract questions" and it was very helpful but I want to make sure I'm not mistaken in any way. Here's my scenario:
2 Line Plan
ME (primary): 2-year contract, unlimited Data (10/15/10 - 10/15/12)
WIFE: 1-year contract, unlimited data (10/15/10 - 10/15/11)
I signed her up for a 1-year contract on the advice of the Verizon rep that was helping us. It ended up netting an additional cost of $70-100 (I forget exactly) but it was worth it in my opinion because I knew that one of us would be able to get a new phone in 1 year as opposed to 2.
So here are the specific questions:
1. Verizon has done away with 1-year contracts. This means that whenever my wife goes in to renew her contract (and get a new device), she will need to sign a 2 year contract, correct? All further questions will be posed based on a "yes" answer to this one. Yes, either a 2yr contract or no contract and pay full retail price of the phone.
2. Assuming she has to sign a 2-year contract, will she still be able to retain her unlimited data plan? Yes, if she upgrades from smartphone to smartphone.
3. Assuming she signs up for a 2-year contract, will she still be able to get "loyalty" pricing or whatever they're calling it now (used to be "new every 2")? Is she even eligible for anything since she's not the primary on the line? Not eligible because she is 1)not the primary line and 2)1yr contracts weren't eligible in the first place.
4. In the other thread titled "End of contract questions..." it was mentioned that "The loyalty discount expires 6 months after it becomes available -- so 2 months after your contract ends". Is this correct? Yes.
5. Currently, if I go to MyVerizon and hover over the "?" next to my number and "Eligible for a discount" it says: "You are eligible to upgrade with discounted pricing. If you upgrade on or after 6/15/12 you are eligible to receive an additional loyalty discount. " I intend to wait for my line as it still has a year on the contract however when I do the same for my wife's line it says: You are eligible to upgrade with discounted pricing." Does it not mention the Loyalty discount because it's not applicable to a secondary line? Or perhaps because it's implied since she's technically out of her contract period? See answer to question #3
I'm trying to make heads or tails of this. At the time, it sounded like a great idea (her on a 1-year, me/primary on a 2-year). I'm hoping it will work out for us so that every year, one of us will be eligible for a new line. I'm only concerned with the unlimited data aspect being that she's going to be going from a 1-year to a 2-year and also the actual loyalty/discount aspect.
Thanks in advance for anyone who helps!!

My iphone hangs any time.I see a call coming but i cannot attend. My call drops anytime and i cant even end the call.The settings page doesnt respond many times.I have given the phone to Apple care , they update the software and return it back to me

My iphone hangs any time.I see a call coming but i cannot attend. My call drops anytime and i cant even end the call.The settings page doesnt respond many times.I have given the phone to Apple care , they update the software and return it back to me.IT WORKS FINE FOR 3-4 DAYS AGAIN THE SAME. Its under warranty and i am disappointed with the Apple product and service

If you used your backup to restore the data after it got returned, set it up as new device and don't use the backup data afterwards. It seems that some data inside the backup are corrupt. Follow this article and set up the account info and other setting manually after that:
Use iTunes to restore your iOS device to factory settings - Apple Support

ERROR at line 1: ORA-03113: end-of-file on communication channel

I have a DRDA gateway set up between my Oracle 10.2.0.4 instance (linux 64 bit), and a DB2 UDB instance (v 8.2 32 Bit). Within a SQLPlus session, I'm able to successfully interact with tables (select, update, delete) that do not have CLOB columns defined. However, whenever I try to access a table with a CLOB column (even doing a select on a single row), I get an end-of-file communication error and it kicks me out of my session. I can interact with the table as long as I don't include the CLOB/BLOB columns. Is there some additional configuration or memory settings I'm missing?
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from mytablewithaclob@db2 where l_column= 1;
select * from dbo.mytablewithaclob@db2 where l_column= 1
ERROR at line 1:
ORA-03113: end-of-file on communication channelI add the following codepage.map (as per another post) - packages are bound properly, and tables without clobs I can interact with just fine.:
S 367 > US7ASCII
D 13488 > AL16UTF16
D 1200 = AL16UTF16
M 1208 = UTF8
MBC 1208 = 1208 1200
column in question is defined as follows in DB2:
mycol CLOB(1G) DEFAULT '' NOT NULL NOT LOGGEDAny thoughts? Much appreciated.
Edited by: kpw on Sep 3, 2009 4:21 PM

Unfortunately TG4DRDA 10.2.0 does not support DB2 (C)LOB datatype. A crash is a rather unpleasant way to report this inability... but that could depend on the version of TG4DRDA you use (10.2.0.1.0). I guess when you upgrade TG4DRDA to 10.2.0.4.0 you will get a proper error message (ORA-28527 - datatype conversion error).
As workaround you could:
- create a view on the DB2 table and exclude the (C)LOB columns
- move/copy the (C)LOB data into a TG4DRDA supported datatype ((long) varchar for bit data)
Regards,
Ed

Lookup DSO in Start Routine and End Routine to update date

Hi Gurus,
I need a Start Routine & help, while loading the data from DSO to Info Cube.
In the DSO ( /BIC/AZSD_O0300 ) & in the InfoCube I have a common fields are
0DOC_NUMBER ( DOCUMENT NUMBER), 0S_ORD_ITEM ( Sales Document Item Number ), 0SCHED_LINE ( Schedule Line ) and 0MATAV_DATE ( Material Available Date ).
Data in DSO is as follows
0DOCNUMBER_ 0SORD_ITEM_ 0SCHEDLINE_ 0MATAVDATE_
1001 10 1 05/21/2011
1001 20 2 05/26/2011
1001 10 2 05/22/2011
1001 20 1 05/18/2011
1002 20 1 05/20/2011
1002 10 1 05/24/2011
1002 10 2 05/28/2011
Data should load in the InfoCube as below.
0DOCNUMBER    0S_ORD_ITEM     0SCHED_LINE    0MATAV_DATE
1001          10    1   05/21/2011
1001          20    2   05/18/2011
1001          10    2   05/21/2011
1001          20     1 05/18/2011
1002         20     1 05/20/2011
1002         10    1   05/24/2011
1002         10     2   05/24/2011
When ever schedule line is 2 for the record we have to check both Document number and 0S_ORD_ITEM are same change the Material moving date to the date schedule line is 1 for the same document and same order item number.
Your help is really appreciated.
Thanks
Ganesh Reddy.

Thanks Parth and Raj. I have written code almost as you suggested just little changes.
Start Routine
TABLES:/BIC/AZSD_O0300.
DATA:ITAB_DSO LIKE /BIC/AZSD_O0300.
TYPES: BEGIN OF ITABTYPE,
DOC_NUM TYPE /BI0/OIDOC_NUMBER,
SAL_DOC_NUM TYPE /BI0/OIS_ORD_ITEM,
SCHED_NUM TYPE /BI0/OISCHED_LINE,
MAT_AV_DATE TYPE /BI0/OIMATAV_DATE,
END OF ITABTYPE.
DATA : ITAB TYPE STANDARD TABLE OF ITABTYPE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
data: wa_itab type ITABTYPE.
SELECT DOC_NUMBER S_ORD_ITEM SCHED_LINE MATAV_DATE
FROM /BIC/AZSD_O0300
INTO TABLE ITAB
WHERE SCHED_LINE = '1'.
Field Routine.
if SOURCE_FIELDS-S_ORD_ITEM <> '1'.
      read table itab into wa_itab with key    doc_num =
      SOURCE_FIELDS-DOC_NUMBER
                                         SAL_DOC_NUM =
                                         SOURCE_FIELDS-S_ORD_ITEM.
      if sy-subrc = 0.
      RESULT = wa_itab-MAT_AV_DATE.
    endif.
endif.
I haven't check how the data is coming. But for now I am closing this issue.
Thanks Again
Ganesh Reddy.

How to fix Syntax Error: Expected end of line, etc. but found end of script. in applescript?

I am making an applescript for my modding tool for Minecraft. It used to use multiple apps and I am now trying to make one app for all the tasks.
Here is the code:
say "You are running iCraft version one point one for minecraft version 1.2.5"
display dialog "Which tool do you want to use?" buttons {"Mod Installer", "Backup", "Restore"} default button 3
set the button_pressed to the button returned of the result
if the button_pressed is "Mod Installer" then
do shell script "~/desktop/iCraft/iCraft.app/contents/re…
display dialog "Insert all mod files into the Mods folder."
display dialog "Have you inserted all Mod files into the Mods folder?" buttons {"Yes", "No"} default button 2
if the button_pressed is "Yes" then
do shell script "~/desktop/iCraft/iCraft.app/contents/re…
display dialog "Finished"
else
display dialog "Insert mod files into the Mods folder and restart iCraft.app."
end if
if the button_pressed is "Backup" then
display dialog "Are you sure you want to backup your Minecraft.jar in it's current state?" buttons {"Yes", "No"} default button 2
if the button_pressed is "Yes" then
do shell script "~/desktop/iCraft/iCraft.app/contents/re…
display dialog "Finished, find it in your Backups directory in the iCraft folder"
else
display dialog "Backup aborted"
end if
if the button_pressed is "Restore" then
display dialog "Are you sure you want to restore your Minecraft.jar with your backup?" buttons {"Yes", "No"} default button 2
if the button_pressed is "Yes" then
do shell script "~/desktop/iCraft/iCraft.app/resources/s…
else
display dialog "Restore aborted"
end if
end
When I try to compile/run it gives me Syntax Error: Expected end of line, etc. but found end of script.

Your script got mangled when pasting it into your message, but the main problem looks like you are missing a bunch of end if statements. Unless your if statements are contained on one line, you need to terminate them with a matching end if statement - for example, the following are equivalent:
if someString is "whatever" then display dialog "foo"
if someString is "whatever" then
display dialog "foo"
end if

"Expected end of line, etc. but found end of script." HELP!!

When I try to run my script, it say "(null.)" When I try to compile it or save it as an application, it says "Expected end of line, etc. but found end of script." HELP!!!
Here is my script:
display dialog "WARNING! a virus has been detected and the system is crashing" buttons {"shut down computor to preserve contents", "burn virus file"} default button 2
if the button returned of the result is "burn virus file" then
say "warning the virus has reacted to its deletion and has activated itself"
say "virus is now in control of the users computor"
say "if you try to stop the virus it will delete all user data"
tell application "Safari"
activate
open location "http://www.facebook.com"
open location "http://www.yahoo.com"
open location "http://www.gmail.com"
open location "http://www.youtube.com"
end tell
tell application "iTunes"
activate
play
end tell
tell application "iCal"
activate
end tell
tell application "Terminal"
activate
end tell
tell application "Finder"
quit
end tell
if the button returned of the result is "shut down computor to preserve contents" then
say "your computor will shut to protect your files."
say "shut down in t-3"
say "2."
say "1."
say "goodbye"
say "it appears that there is a problem"
say "the virus is starting to take over your system"
beep 17
display dialog "how DARE you try to delete me. I am now going to take over your computer." buttons {"**** YOU GET OUTTA MY COMPUTER", "OK, have fun!!"} default button "OK, have fun!!"
if the button returned of the result is "OK, have fun!!" then
say "thank you!!"
say "watch this!"
Tell application "iChat"
quit
end tell
Tell application "Finder"
quit
end tell
if the button returned of the result is "**** YOU GET OUTTA MY COMPUTER" then
say "That attitude will not be tollerated."
say "Dum dum dum dum dum dum dum he he he ho ho ho fa lah lah lah lah lah lah fa lah full hoo hoo hoo" using "Cellos"
display dialog "A virus has been detected going through your files. Would you like to try to stop this?" buttons {"OK"} default button "OK"
if the button returned of the result is "OK" then
beep 5
display dialog "there has been an error. Do you want to try to force quit?" buttons "Yes" default button "Yes"
if the button returned of the result is "Yes" then
say "Well, thats just too bad!"
beep 2
say "Sorry about that."
say "The virus has been purged from your system."
say "Your computer will now restart to make sure that all traces of the virus have been removed."
say "shut down in t-3"
say "2"
say "1"
say "goodbye"
tell application "Finder"
restart
end tell
end if

You need to complete compound if statements with an end if - see the AppleScript Language Guide for a description of the various kinds of if statements.
Although I don't think it is going to do what you expect, your script would look something like:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #DAFFB6;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
display dialog "WARNING! a virus has been detected and the system is crashing" buttons {"shut down computor to preserve contents", "burn virus file"} default button 2
if the button returned of the result is "burn virus file" then
say "warning the virus has reacted to its deletion and has activated itself"
say "virus is now in control of the users computor"
say "if you try to stop the virus it will delete all user data"
tell application "Safari"
activate
open location "http://www.facebook.com"
open location "http://www.yahoo.com"
open location "http://www.gmail.com"
open location "http://www.youtube.com"
end tell
tell application "iTunes"
activate
play
end tell
tell application "iCal"
activate
end tell
tell application "Terminal"
activate
end tell
tell application "Finder"
quit
end tell
else if the button returned of the result is "shut down computor to preserve contents" then
say "your computor will shut to protect your files."
say "shut down in t-3"
say "2."
say "1."
say "goodbye"
say "it appears that there is a problem"
say "the virus is starting to take over your system"
beep 17
end if
display dialog "how DARE you try to delete me. I am now going to take over your computer." buttons {"**** YOU GET OUTTA MY COMPUTER", "OK, have fun!!"} default button "OK, have fun!!"
if the button returned of the result is "OK, have fun!!" then
say "thank you!!"
say "watch this!"
tell application "iChat"
quit
end tell
tell application "Finder"
quit
end tell
else if the button returned of the result is "**** YOU GET OUTTA MY COMPUTER" then
say "That attitude will not be tollerated."
say "Dum dum dum dum dum dum dum he he he ho ho ho fa lah lah lah lah lah lah fa lah full hoo hoo hoo" using "Cellos"
end if
display dialog "A virus has been detected going through your files. Would you like to try to stop this?" buttons {"OK"} default button "OK"
if the button returned of the result is "OK" then
beep 5
display dialog "there has been an error. Do you want to try to force quit?" buttons "Yes" default button "Yes"
else if the button returned of the result is "Yes" then
say "Well, thats just too bad!"
beep 2
say "Sorry about that."
say "The virus has been purged from your system."
say "Your computer will now restart to make sure that all traces of the virus have been removed."
say "shut down in t-3"
say "2"
say "1"
say "goodbye"
tell application "Finder"
restart
end tell
end if
</pre>

Running "Flex test drive" - Got error while attempting to connect to data service

Hi,
I'm a Flex / Flash builder beginner. I downloaded the 60 days evaluation, and started to run the "Flex test drive" :
http://www.adobe.com/devnet/flex/testdrive.html
My configuration :
XP SP3 PRO french edition
Tomcat 6.0
My local Eclipse :eclipse-jee-helios-SR2-win32 (but also got the issue on the Flash Builder Eclipse, which version is 3.4.0 (Generation ID M20090211-1700)
Flash Builder 4 with Eclipse plug-in
All on same PC
The Test Drive proposes examples in three technologies : Cold Fusion, PHP and Java. I'm doing the Java examples.
Installation of Flash Builder, as well as step 1 of the Test Drive (Build the user interface) went fine. I could run the project, which at the end of step 1 correctly displayed the UI in my browser.
Only one problem, I don't know if it is relevant for the rest of this post : I first got an error, saying that ports 8080, 8005 and 8009, requested by Tomcat, where used. After a short Google search, I fixed it by changing these ports to 8081, 8006, and 8010, in the Tomcat 6.0\conf\server.xml file.
The Test drive second step is "Connect to data". I found some discrepancies between the Test Drive doc, and what is displayed in Flash Builder. The Test Drive says :
"Use the Data menu and the Service Wizard to create a service for your application server. For ColdFusion and Java, specify the service file you put on your application server earlier (see Figure 9 for a PHP example). For Java, select the No password required check box, select the employeeService destination, and change the service package to services.employeeservice."
--> But there is no "No password required check box".
Also, when running the "Connect to data/service..." wizard, it was not at first completely clear what to choose. The proposed choices were :
BlazeDS
ColdFusion
HTTP
LCDS
PHP
Web Service
XML
Since all others choices, when tried, declared to be unconsistent with my project's server type, I finally selected "Web Service".
In the next wizard's form, according to the Test Drive indications, I specified the URI of my EmployeeService class : C:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\testdrive\WEB-INF\classes\services\EmployeeService.class
That defined correctly the other fields.
But when pressing the "Next >" button, Flash Builder issued the following error message :
English translation : Unable to extract operations and entities from specified WSDL. Reason : an error occured while instrospecting the service.
And the full error text is :
An error occured while instrospecting the service. WSDLException: faultCode=PARSER_ERROR: Problem parsing 'file:/C:/Program%20Files/Apache%20Software%20Foundation/Tomcat%206.0/webapps/testdrive/W EB-INF/classes/services/EmployeeService.class'.: com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequenceException: Invalid byte 2 of 2-byte UTF-8 sequence.
It is usually relatively easy to find fixes through Google searches, but this time, it didn't work. So here I am, expecting a bunch of wise answers from all the nice Flex / FB gurus that I'm sure haunt this forum .
Thanks and best regards.
Marc.

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

Usage lines got expired even end date is future date

Similar Messages

Maybe you are looking for