Usage minutes not showing
After fully charging then using, it should show minutes used since last charge, it is not showing this information? the battery is showing fully green and an ap I have says 100% charged, so ???
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The just wait
Similar Messages
-
Usage Tracking not showing correct data.
We have configured usage tracking in our project.while creating a report with(Subject Area,Query,Request ) it shows the dashboard filter query of all subject area in a particular subject area.
Eg : If Subjuct area SA1 has a dashboard prompt query "@@@@' ,and Subjuct area SA2 has dashboard prompt query "$$$$$' ,both the querys are shown in Subjuct area SA3 in the usage tracking reports.Hello,
We implemented usage tracking too
Make sure you are not running into the following BUG pre-10.1.3.4.1:
BUG 7233756 - USAGE TRACKING DOESN'T CAPTURE AD-HOC REPORTS CORRECTLY
We found this issue and verified it was resolved in 10.1.3.4.1.this problem is still there, and we are getting value of random subject are populated for drill down queries. is there any bug for this too? -
ORACLE DATABASE SPACE USAGE report not showing all databases in 11g
Hi All,
I have scheduled "Oracle Database Space Usage (Group)" report for all databases available in the OEM11g. But in the report i am not able to see all the databases in the group. Can any one please help on this.
Regards,
GKWe had the same problem in 12c EM. This had to something with "tablespace allocation metric". This metric was disabled for some databases. This could be your case in 11g also. This metalink note might worth seeing .
Oracle Database Tablespace Monthly Space Usage shows no data (Doc ID 1536654.1) -
Hello,
When I am opening usage reports under Site Settings > Site Administraton > Popularity Trends, i cannot see any data after 9th May 2014. It stopped working and all the numbers coming to zero after 9th may.
I tried many solutions that are given on internet for this issue like restarting timer job, enabling usage on usage service application, permission on log files, etc.. but none of them worked for me.
Please help me out. Is usage report depend on any service? search is working fine, usage service application is working fine.
Thanks.
chiragHi chirag,
For troubleshooting your issue, please take steps as below:
Make sure the Web Analytics Data Processing Service and Web Analytics Web Service are started on each server.
Make sure web analytics service application is started
Deactivate and Activate the site collection Features on Reporting.
Check the detail error message of ULS log to determine the exact cause of the error.
Also you can have a look at the article:
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/30d11d27-6708-4bfe-a7d3-4b0aed522e7d/site-web-analytics-reports-no-more-data?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Usage Meter Not showing under My Services
ANyone else have this problem? I log into my account; switch to the My Services Tab and then hit the Green B and all I see is "BundleComponent".
Would be nice to know when I am reaching my limit....Hi LarryPlane,
Thanks for posting. I can check what’s going on with your account. Drop me an email with the account details and a link to this thread for reference. You’ll find the contact us form in my profile under “about me”.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Managing video storage with iOS8 - video usage not showing
I've typically deleted video (iTunes tv shows) using manage storage/usage from General settings. For some reason video data usage is not showing and I'm not aware of any other means of freeing up space. I'm not able to delete directly from video itself once data has been downloaded. Help!
thanks!
using iPad ios 8
Message was edited by: vmclellandHello vmclelland,
Thanks for using Apple Support Communities.
To delete videos from your iPad running iOS 8 please follow the steps below.
Delete a video from iPad. Tap Edit in the upper right of your collection, then tap on the video thumbnail. If you don’t see the Edit button, look for on your video thumbnails—those videos haven’t been downloaded to iPad, so you can’t delete them. To delete an individual episode of a series, tap the series, then swipe left on the episode in the Episodes list.
Deleting a video (other than a rented movie) from iPad doesn’t delete it from the iTunes library on your computer or from your purchased videos in iCloud, and you can sync the video or download it to iPad again later. If you don’t want to sync a deleted video back to iPad, set iTunes to not sync the video. See Sync with iTunes.
Important: If you delete a rented movie from iPad, it’s deleted permanently and cannot be transferred back to your computer.
Add videos to your library
Take care,
Alex H. -
I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If the problem persist, contact apple support at apple.com/support
I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.These are the steps mentioned in the article iPhone: Troubleshooting activation issues
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance. -
How can you see what data usage was for on the bill? It only shows the date and usage but not the reason for the usage.
You can not see this info on VZW's site. There are apps for smartphones that will break down the info though, but by site or what was downloaded
-
I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000 photos not showing up. What happened?! Where did all my photos go?!
WOOHOO!!! i finaly fixed the problem. Here is what to do:
Chances are if you did the same thing as me you either have
A) No album names at all for ALL your songs in your library
or
B) Have the same name for every album for ALL your songs in your library.
Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
For some reason having the same album name for all your songs messes up the organization of the iPod.
Hope this helps anyone else that is having the same problem -
Messages Not showing in My Verizon Usage.
Is there a reason all of my messages are not showing in My Verizon when I check my usage?
The text messages are one color and iMessages are another. You can check the full user manual for your phone to find which or search in the Apple/iPhone section of this community for similar discussions.
-
Broadband usage not showing on my account for the ...
For the last 2-3 months my Broadband usage has not been showing on my account website. I am on unlimited broadband but would still like to know what I have used. This has happened, for short periods, several times before but usually rectifies itself within a few days.
Solved!
Go to Solution.Hi pixmate
Please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Not showing Texhnical Usage in MOPZ
Dear Guru's,
I am going to install NW 2004s EHp1 in my existing PI 7.0 system.
It is not showing Texhnical Usage while i created maintance transaction in MOPZ.
Whereas it is showing for my ERP systems(ECC 6.0).
Please let me know,why it is not showing "Technical Usage" in Soultion Manager 7.0 EHp1.
Please suggest how i can procesed.
Thanks & Regrads,
VenkatHello there,
The upgrade to Netweaver 7 EHP1 is not supported by Maintenance Optimizer.
Please check http://service.sap.com/solman-mopz for a list of the supported upgrade paths.
Best regards,
Miguel Ariñ -
HI,
I was polling my ASA on OP manager which was reside on INSIDE zone now we move OP manager on DMZ. Now ASA not showing ACTIVE CONNECTION and CPU Usage in OP manager.
below are snmp configuration.
snmp-server host DMZ A.B.C.D community cisco version 2c
snmp-server enable traps
snmp-server community cisco
and recieve a mention log on ASA during polling ASA on OP manager (NMS).
Kindly advice in this regards.
Regards,
Arshad AhmedAny one kindly reply
-
Why does my iPad not show up in manage usage
Why does my iPad not show up in manage usage?
Why does my iPad not show up in manage usage?
-
I have just fully charged my ipad 4 but the usage time since last full charged is not showing anything. How can I get it to show the usage time?
brodeuga wrote:
Time no longer displays on DVR box. Please explain how to correct.You may just need to reboot the DVR... pull power, wait 20 seonds, then plig back in.... see if that brings your clock back online.
Maybe you are looking for
-
After reformatting my hard drive after a crash involving my hard drive's directory and migrating my backup data from my Time Machine drive in Lion 10.7.5, suddenly my Safari v. 5.1.7 won't open and crashes repeatedly. . The long crash report [below,
-
Nothing to add, really, except that I used to use Internet Explorer 8 and had no problems there. However I prefer to stick with Firefox!
-
Adobe flash player update service 11,6 r602
Hello im having problem getting rid of box saying {adobe flash player update service 11.6 r602 stopped working and was closed} it also says { a problem caused the application to stop working correctly windows will nitify you if a solution is availabl
-
Ihi Guys I am in the process of Oracle database upgrade. Oracle 9i to Oracle 10g(10.2.0.4) SAP: 4.70, Windows 2000 DB have been installed and now need to apply the patch to level 4(10.2.0.4). In the Oracle documentaion for Oracle Patches, i can see s
-
Can I use a Time Capsule as a part of my network> I am connected to internet through modem and want to use Time capsule as a wireless harddrive and wireless connection to usb printer. How can I do that? Please help