Usage of Aggregrate persistsnce wizard

Hi All,
currrently we are running with performance issus formy project. we already used Fragmentation content and partation in OBIEE RPD side .still we dnt see any improvement in this.
Could you pls suggest me how to achieve performance .Currently i'm using OBIEE 10.1.3.4 version on windows envorinment.
Is there any possiablities are to improve performance in OBIEE side.
we created Alias tables
we used fragmentation content
we defined all the join conditions correctely.
could yu pls help me, if i can use aggregrate persistence wizard should i get improvement.
Thanks for your help.

Hi,
Yes, Aggregate tables are sure to improve performance. when you noticed that the performance is bad, can you please help to identify if the bottleneck is the BI side or the database. May be you can run the physical queries directly on the DB and see the turn around time. If the DB is good, check if your dashboard is cluttered with too many reports and hence running slow. Some options like increasing number of connections to the database etc might also help but it is important to identify the bottleneck.
Thank you,
Dhar

Similar Messages

Usage of Time Series Wizard

Hi All,
We are using OBIEE 10.1.3.4 version on windows envorinment..For our OBIEE project every we are getting feed around 4 lacks per a day.So we are planning partition the data in OBIEE side using time series wizard does it Possiable in OBIEE side..Using time series wizard we can pratition the data for every 6 months wise.
Could you pls help on this..

Yes , you can but make use of partitioning and NOT time series...http://gerardnico.com/wiki/dat/obiee/fragmentation
Also, go for aggregate tables in OBIEE http://www.rittmanmead.com/2007/10/using-the-obiee-aggregate-persistence-wizard/
Hope this helps

User defined Object registeration wizard

Hi Hi!
Hope all are moving great!
Do me a favour can any one guide me the usage of Object Registeration wizard found under the menu 'Tools'
Cheers,
Zen.M

Hi dear! Thks a lot for ur quick turn. but i do want to know abt its functionality basic to SBO without the pt of view of SDK.
wat can be done with it, can u say me just an intro.
;0)

Database Diff - Generates Create commands only (does not list alter command

Hi I'm using very latest version of the SQL developer. I was using Database Diff feature and found issue that when there is differences in table (say a addition column exits in one of the database), generate script generates "Create table..."statement. I would rather expect alter table because table exist on both databases but a column was different.
If I take that script try to create table on the database that has difference, then I would have to lose all data (of course there are alternatives), which is not very efficient script then.
any ideas if there is an option to show alter commnads?
thanks.

The usage of the Diff wizard is not crystal clear.
If your connections are as user X, but the objects are owned by user Y, they won't be picked up in the target connection. Although you are allowed to pick objects from different users (user Y) on the source side, the comparison seems to be with user X on the target side. For it to work properly, you need to define connections ob both sides as user Y. I haven't really tested this thoroughly because I don't have the change management pack licensed anywhere.

File Export use last usage settings of File Export Wizard

how convert a color photo to grayscale? cs6 fireworks / adobe cloud,... File > Export use last usage settings of File > Export Wizard???

There are a lot of different ways to create greyscale images. Here are three methods:
Select the bitmap and choose Commands > Creative > Convert to Grayscale.
This is a quick but destructive method, meaning that it modifies your original image. To preserve your original image, you could first make a copy using the Edit > Clone command.
Select the bitmap and apply a Hue/Saturation effect.
This effect can be found in the Properties panel within the Filters menu, under Adjust Color. Set Saturation to -100.
Select the bitmap and apply the Convert to Alpha effect.
This effect can be found in the Properties panel within the Filters menu, under Other. Set the document canvas to White.
At least one of these should work for you.
Unfortunately, I can't quite understand the portion of your question regarding File > Export and the Export Wizard. If English is not your native language, you might try using Google Translate to compose your question.

When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

Thank you, Vincent! It's still down for me, but at least I know someone had the same issue. Hoping it's going to work over here soon
Best!

Usage Based Optimization Wizard not finding Queries for Selected Measure Group (2008)

I have configured my analysis services server to capture queries in an OLAP Query Log table. The connection string points to a table on a SQL Server relational database. I have verified that the dbo.OlapQueryLog table was created. I have set it to
capture every 5th query. The table has been collecting query statistics for several hours. I opened my model in BIDS, clicked on the cube and opened the Aggregations tab. I click on the measure group partition and select the Usage Based Optimization
button. The wizard opens up and I click next. In the "Specify Query Criteria" dialog, there is a warning that there "are no queries in the log for the selected measure group". The problem is that there are queries but the UBO
Wizard doesn't seem to be finding them. Do I need to set a property in the BIDS to point to the location of the query log file in the relational database?
davidg12

Hi David,
Is your SSAS database name and ID are same? We came across same kind of issue while ago. We initially created our database with one name and later renamed the database.
The database name and ID should be same in order to perform Usage Based Optimization.
To do so,
On the solution explorer the top node is the database.
Right click on that node and click edit database. In the property windown you should be able to see ID. The ID and the name of the database should be the same.
If both are not same, Change the database name to match ID.
Please mark as Answer if this helps!
Rajasekhar.

PC with slow boot and pc speed, sudden high pc usage, delay-freeze when opening/performing something

Hi,
Before everything, two things:
1. I'm not a native english speaker so i may have some problems to speak properly/as objective as i'd like to.
2 . I'm writing in this section because i don't know the cause of my pc issues so i can't categorize them.
Now, my computer is a Toshiba satellite L755-S5244, Windows 7 Home premium 64 bits, Intel pentium CPU B940 2Ghz, 4 Gb RAM, and I'm writing this message using it.
I bought the laptop in December of 2011 and at the beggining it was working normally. Someone else used the computer these last months and he left the pc without antivirus protection; when i installed one (Avast) and start to analyze the pc it suddenly shutted down. It wasn't able to boot, so after some trys to restore/enter in safe mode I finally used the Toshiba Recovery Wizard to get the pc to the original factory settings. The process was sucessfull, so the first thing i did after finish the process was install a new antivirus (this time i used Kaspersky Pure) and the the analysis showed no threats as i expected.
However, before the recovery process i realized of some slow performance on the computer, like talking a bit too long to opening files or menus, control panel... almost anything was opening with a little delay even just after start the pc. This problem continued even after the recovery process. Also, an online game -League of legends- which was working fine when i just bought the pc, developed some issue: the screen and the audio randomly frezees for like 3-5 seconds. These problems seems to be related between each other.
But that wasn't all. After the recovery to the original factory settings, i just installed a few things:
-Kaspersky Pure 2.0, CCleaner (free), Mozila Firefox, and League of legends.
Later I also installed Microsoft Office 2010.
The antivirus showed no threats. The game kept with the freeze thing.
And 2 days ago i was playing league of legends and downloading Skype when the pc suddenly got too slow. I restarted it. After the restart it took a long time to boot, and before the windows login screen loaded there was a black screen where only the mouse was showed; the start-up was slow too, (this one showed a blue screen with the mouse too -but not BSOD-) all this took like 15-20 minutes; that never happened before so i restarted the computer again but the problem was the same: slow boot, slow desktop start-up (let's not even talk about opening something).
I went to the repair menu (f8) and try to restore the system but it didn't change anything. I checked for memory issues but there wasn't. I looked also for starting problems but the repair didn't find anything. All in there was saying: "the computer performance seems normal", but it wasn't. Like entering to windows in normal mode was talking to long, i tried the safe mode. It was also slow but not that much. When i entered, a system restore which i wasn't able to performance before in normal mode popped-up and said that the system was restored sucessfully to the first restore point -just after the factory recovery, but it apparently didn't fix the slow bot issue.
Even in safe mode the software was working slow so i decided to go for the toshiba recovery wizard again, and looked in here, the forums -and the rest of the net- for problems like mine.
This time the Toshiba Recovery Wizard took like ages to finish. 3 hours just for recovering, and like 7 more hours just installing the drivers. The boot/start-up was still slow, so i think this was the cause of the slow recovery because the wizard restarts the computer a lot.
When the factory settings recovery finished, the first boot was slow, also the start up, the programs, the start menu, the control panel, ... everything was slow the first time i opened it. If i keep using the same program, it seems normal, but randomly freezes if i select some option, of press something (like this browser, google chrome, even now when i'm writing this message or before where i was registering into the forums). As obvious, because this slow performance i'm really not comfortable using this computer.
I used the HDD SDD Alert but it says the HDD is working fine (the hard drive doesn't make weirds sounds, i almost don't hear it at all); also i did a PC Diagnostic with the PC diagnostic tool and everything passed the test. I can't think of virus/malware because i did the recovery wizard, twice. I just installed Avast again and it didn't find anything. With the task manager i noticed of a high pc usage (almost always 100%) was showing for a really short moment when/after the computer freezes.
So, i don't know how to solve this slow performance.
The last thing i did was download those speed-up softwares: SpeedUpMyPc, RegCurePro, SpeedyPC pro and Pareto logic Health Advisor. They scanned the pc for free and found like 100 system performance issues, but I'm not able to use these programms to fix the issues if i dont buy them. Also i'm not even sure if that will fix my problems.
That's why i'm here, looking for a way to identify/fix them. One last thing: all this time i've been checking the temperature of the laptop but is never hot -now is not even warm. Now i'm afraid of restarting the PC again cuz i know it will take a long time to get into a kinda stable performance like right now.
So that's all. If you read all this, have my thanks. Also, any help would be really appreciated it.
EDIT:
A new thing happened. When i try to installed league of legends, the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring. I hope this can may be a clue about what is happening to my pc.

Satellite L755-S5244
If you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media and still have trouble, then you know it's not due to software.
the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring.
In particular, that sort of thing occurs when a hard drive is failing. Time to call Toshiba's tech support at 1-800-457-7777 (from the US) or 1-949-859-4273 (from outside the US).
-Jerry

Memory error while running DI configuration wizard

Hi
We have installed NW 7.0 with DI usage. After Installation, we are running DI configuration Wizard. During step (at 48% ) Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers its giving error:
Exception Class:java.lang.OutOfMemoryError
Following is the screen shot of error:
Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
Description
No specified detailed description
State
START_ACTION
Support Information
Type of Action
InvokeServiceDebug Events
InvokeService:Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
Library: sap.com/tclmconfig~content
SourcePath ./DIStandaloneProcess/DICommonProcess/DIUserConfigProcess/DIAssignRolesToAddtlGroups/DIInvokeAssignRoleToXDevGroup
Time 2009/02/03 at 23:38:01
WSDL /content/common/service/usermanagement/assignRoleToGroup.wsdl
InvokeService- Result: Failed
Exception Message:null
Exception Class:java.lang.OutOfMemoryError
Stacktrace
Messages at cancel time
Messages at exception time
WebDynpro
<WebDynpro> <loggedInUser>J2EE_ADMIN</loggedInUser> <initial>true</initial> </WebDynpro>
Can anybody help me solving this problem
Thanks in advance

Read,
http://help.sap.com/saphelp_nw70/helpdata/en/43/54cdc48d395f6ce10000000a1553f6/frameset.htm
That should fix your problem
regards
Juan

What tasks I should select in NWA Configuration Wizard for PI component

Hello,
I'm in the stage of setting up the NetWeaver 2004S SR2. I've logged to the Net Weaver Administration console. According to documentation, to properly configure PI component I should execute Configuration Wizard task. The problem is that documentation is not very specific on what exact tasks I should execute, so I would like to get some advise from the community.
All tasks I can see are:
BI_00_This wizard will execute Postinstall steps of technical configuration of BI-Java Initial
DI_Allinone_This wizard run all post installation steps for DI, CBS, CMS and DTR. Initial
DI_CBS_This wizard run all post installation steps for CBS. Initial
DI_CMS_This wizard run all post installation steps for CMS. Initial
DI_DTR_This wizard run all post installation steps for DTR.
DI_This wizard sets the Oracle Parameters as per CSN note: 848708 Initial
MI_00_This wizard will execute Postinstall steps of technical configuration for the NetWeaver Mobile Infrastructures
MI_01_This wizard will create User and Assign Dedicated roles for the NetWeaver Mobile Infrastructure Initial
MI_02_create JCo Initial
MI_03_create TCP/IP
MI_04_register Connection Initial
MI_05_set profile in ABAP Initial
MI_06_schedule MI Job Initial
NWA_01_This wizard will execute configuration for local SLD Initial
NWA_02_SLD system : Connect SLD to CEN (if CEN present)
NWA_03_Creating a connection to the SLD and Setting required authorizations for SLD (CIM client settings)
NWA_04_Creating a connection to the ABAP stack of CEN and Starting heartbeat monitoring Initial
NWA_05_NWA system : Store access data per each managed Java system (optional) Initial
NWA_06_NWA system : Register each managed ABAP system to SLD Initial
NWA_07_creates Destination for Data Supplier Bridge
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Initial
PI_01_This template checks if the necessary services are started Initial
PI_02_This wizard will test the BAPI call to SWF_XI_BPM_AUTO_CUSTOMIZE Initial
PI_03_This wizard will assign the Application roles Initial
PI_04_This wizard will Maintain_Technical_System
PI_05_This wizard will configure the integration server for sld Initial
PI_06_This wizard will create the necessary Destinations in ABAP Initial
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server Initial
PI_10_This wizard will Register_Queues_NA Initial
PI_11_This template services are started
I guess I need to mandatory execute PI_XX tasks, but what about others - do I need to execute anything else (I need only PI component to be installed and configured)? Not sure if that makes any difference, but this is the very first time I get into the NWA, so no previous configuration tasks were executed from the Configuration Wizard.
My full system configuration: NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005.
Thanks in advance.

Hi Maxim,
Please follow this procedure:
1) Using Config tool Modify VM setting as per requirement (OS and H/W Dependent) Refer note 723909 Java VM settings for J2EE 6.40/7.0.
2) To set Environmental Variable refer Note 314530 - Number of RFC/CPIC connections for external clients. These parameter should be taken care while installing templates
Set these:
     1) gw/max_conn 2000
     2) gw/max_sys 1200
     3) gw/max_overflow_size 40000000
     4) gw/max_shm_req 200 (this is to adjust the memory   allocation)
Profile parameters
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
ITS
CPIC_MAX_CONV 5000(Should be taken care that it should be set for <sid>adm user
3) Installing Template
Go to home page
http://hostname:portnumber/webdynpro/dispatcher/
Click Deploy and change
4) After This Click Configuration tab and then click Install
For the next tab select scenario PI
And configure template and finally install
5) In case you face any problem while importing please read these notes for altering parameters
Note 314530 - Number of RFC/CPIC connections for external clients
Note 923359 - Collective Note: Configuration Wizard - Template Installer
Hope it will Help you at this stage at development stage
You need to import SAP BASIS Software Component Version into Integration Repository based on your SP Level & XI or PI.
You need to download it from [service market place.|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ]
Regards,
Gagan Deep Kaushal

Errors in few of the step while running configuration wizard for PI 7.0

hi all,
i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
now in this i got error in few steps:
STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
the error was: CIM_ERR_FAILED: Object manager is not activated
PI_05_This wizard will configure the integration server for sld.
The error was:
Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
PI_09_This wizard will configure Role of Integration server
Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
What should i do?
Regards,
Priyanshu Srivastava

Hi Priyanshu,
"Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
Regards,
Blanca

10g Preview: No way to rename view link usages in AM

10g Preview (9.0.5.0.0 Build 1375), Win2k SP3.
I generated the entity objects, view objects, associations, and view links from my DB structure. I created an application module with the default data model from the view objects and view links.
I then renamed all of the view links using the Rename View Link dialog. The AM's xml file was correctly updated with the new names of the underlying view links, but the view link usages retained the old names.
There does not appear to be a convenient way of renaming the view link usages in the AM. The workarounds are either to deconstruct the data model and then reconstruct it, or to manually edit the .java and .xml files.
I would like to see, at minimum, the ability to rename the AM's usages via a right-click menu in the Structure pane. This would affect both view object and view link usages. Currently the only option available in the right-click menu is to edit the underlying business object, not the usage. It also would make sense to allow view link usages to be renamed from the Data Model page of the AM wizard.

That worked beautifully. I didn't have the property inspector open originally, so it's nice to know there is a way to rename usages after all.
I wonder if there's a usability issue here though... maybe it's just me, but with the ability to rename some things via the right-click menu in the navigator pane, it seemed natural to look in the very similar structure pane for the same sort of functionality. Now there's a third place to look. Perhaps if the right-click menu in the structure pane simply had a "Properties..." entry or something similar that brought focus to the Property Inspector, it would help the user understand that there's another place to try to make the desired changes.

How to deactivate SPNego after running the SPNego Wizard in NW2004s

Hello,
We have a NW2004s Platform with Usage Type AS Java and DI. The SPNego is configured using the SPNego Wizard and its working absoutely fine. The problem is this that we would liek to use the Basicc authentication also side by side. In NW2004, when SPNego is manually configured (without wizard), the URL for SPNego needs to be configured so that you get the SPnego at all. If you call the normal URL for example for Portal http://portal:50000/irj, you get the Basic Authentication. But as soon as the SPNego is configured through the Wizard, the mentioned URL is automatically configured to the SPNego! During configuring the SPNego Wizard, UIDPW or Basic is set as a Fallback Authentication..but Fallback means Fallback, i.e., when SPNego doesnot function..What is when the two schemes are required to work simultaneously ?
I did change the Ticket in the Security Keystore in the Visual admin and set it to "basic" again (for the Configuration of the Wiizard, it was set to spnego) , it does return a login screen, but you cannot get acces through any of the users, not even with Administrator/j2ee_admin.
I did deactivate the service user as well, but in vain.
Has anyone experience with this. Should we make changes in the prios in the authschemes.xml ?? Would it not the working spnego in any way..
I look forward to any helpful hints.
Thanks,
Rahila Zahir

Later I found th solution. Just had to switch back to Basic in the Login Modules in Visual Admin--Security Provider Service. I was confusing it earlier with the NW2004.
Cheers,
Rahila Zahir
Edited by: Rahila Zahir on Jan 5, 2008 1:15 AM

Tutorial 2 for BAPI WDA - set column settings in Wizard - page 7, step 4.

To the Pretty Good WDA Programmers, and/or Experts,
     I am new at this, so any help is appreciated.
     In the tutorial: Dynpro for ABAP: Tutorial 2 - BAPI Usage at: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cb5d345-0801-0010-6a8e-fc57c23fd600 has in page 7, step 4. Seems a little vague to me:
The Required Methods and Context Elements
On the two subsequent dialog windows, default values are listed for giving names to the context nodes and attributes required by the service call as well as to the required methods. The proposed names are based on the names of the embedded service, but you can change them as required.
    So the question is, in the wizard for page 7, step 4, what are the column settings set to: Parameter Values / Controller Attribute / Context Node ... to get the BAPI Input/Output and Changing columns looking like they do in the tutorial on the next page (pg 8)?
   Step-by-step, or in this case, column-by-column directions would be most helpful!
Thank You...
Edited by: Daniel Perecky on May 4, 2009 10:58 PM

To Trikanth and Saurav,
   Thank you for those screen-shots Trikanth. They definitely helped point me in the right direction. The problem was that all of the 'Changing' structure sub-structures would end up in the view node.
   When I would try to map 'Changing | Flight_List' with the context, a message would appear: 'Mapping is only possible for Flight_List if Parent is Mapped'. Then when I mapped the entire 'Changing' node, it would map to the Component Controller, but then it would not map correctly to the output display table.
   Apparently only one dimension of structures could be mapped. A (deep) structure of structures cannot be.
   So in step 4, in the wizard, to make this work, I had to only make visible 'Changing' by what you both kindly confirmed: making it Context.
Settings Summary: Root Node- unchangable.
Parameter Group 'Importing'- Context (Node/Attribute)- Unchangeable
Parameters- Airline - Changed to Context (Node/Attribute)
Dest_From              - Changed to Context (Node/Attribute)
Dest_To                  - Changed to Context (Node/Attribute)
Max_Rows              - Changed to Context (Node/Attribute)
Parameter Group 'Changing'- Context (Node/Attribute)- Unchangeable
Date_Range            - left as Controller Attribute
Extension_In           - left as Controller Attribute
Flight_List               - Changed to Context (Node/Attribute) <---
Extension_Out         - left as Controller Attribute
Return                     - left as Controller Attribute
So, when 'Changing' and ONLY 'Flight_List' was made visible in the node, it mapped correctly to both the Context node and to the output table columns.
This is great. Thanks a Lot!

Variable Entry Wizard.

Hello my dear Gurus friends.
I have a requirement in queries. The idea is to display all the characteristics available in the cube at the beginning of the query in form of variables, in order to select the different values by the user, but this they would like to be as a wizard, I mean, they want the variables of each characteristic to appear individually.
Any idea would be very appreciated and i'm going to assign many points.
Thanks in advanced.

Hi,
I was talking about the usage of Char variable with replacement path: http://help.sap.com/saphelp_nw04/helpdata/en/2c/78a03c1178ad2ce10000000a114084/content.htm
Here is causes Query1 to execute in the background anf then provides the results to Query2, so although the users just see the Query2, the variable screen of both queries pops up separately. But with 10 chars to appear one by one, I am not sure if it would be a good idea to create 10 queries and link them up this way.
Would your users be more comfortable with a web report? Or any significant reason why you need the variables one by one?

Usage of Aggregrate persistsnce wizard

Similar Messages

Maybe you are looking for