Usage of ALE Technology

Hi Friends,
            I have doubt which may seesm to be silly, but I am not clear with this concept ,, so could anyone of you walk me through this?Pleaseee
In SAP we have many technologies for talking with NON SAP Systems.
Lets say BDC, BAPI and BADI's  ans also now we have ALE IDOC 's and EDI.
My doubt is , when do we go for ALE Technology , despite we having BAPI and BADI's for talking with the other legacy Systems.?
IF I was silly in my Questions, please bare with me , and help mein understanding the concepts.
Thanks in Advance
Regards
Tina

Well, I have seen like when you have two systems and you’re entraining data in one system and you want to in sink with other system , you’ll create distribution model , set up port and partner to send the data using message types. So when user change some data it creates the data and then using ALE you can update the other system. You can see all ALE transaction by going it tr.SALE.
You can also refer links :
http://www.sapgenie.com/ale/
http://www.thespot4sap.com/Articles/SAP_ALE_Introduction.asp
http://www.middlewarespectra.com/abstracts/8_95_07.htm
Hope this’ll give you some clue.. Don’t forget to award the points
Thanks
Saquib
Message was edited by: Saquib Khan

Similar Messages

  • Usage of ALE - idocs generated for BAPIs

    Hi
      I need to use - the std idocs generated for BUS2032 object - CREATEFROMDAT2 method to store the BAPI call  ( BAPI_SALESORDER_CREATEFROMDAT2 )data for those sales orders that could not be created.
    If I want to use the SAP delivered BAPI ( BAPI_SALESORDER_CREATEFROMDAT2 ) to call as it within an ABAP program - and then if the call did not go through - then log the data for BAPI into the corresponding idoc with the message type SALESORDER_CREATEFROMDAT2 ( idoc type SALESORDER_CREATEFROMDAT202 )  do I need to move the values from the BAPI structures to the idoc segments programatically ?  Or since the idoc is linked to the BAPI - by definition, is there an implicit way to move data to the corresponding idoc segments and save the idoc .
    Can anyone out there give me a code sample to do - what I have asked above ?

    Hi,
    I guess you can use function module ALE_SALESORDER_CREATEFROMDAT2 to create idoc from bapi data. You can pass the entire data in internal tables that you are passing to BAPI into above mentioned function module and then it will create an Idoc for the same. Also populate the receivers in the internal table receiver.
    KR Jaideep,

  • Outside In Viewer Technology: free usage in shareware app

    Free usage on OIV Technology can be done by using plugin for Total Commander. You can find plugin here: http://totalcmd.net/plugring/oilister.html .
    It says "This plugin is freeware, but libraries from Oracle® is not, you must accept license
    http://www.oracle.com/technetwork/licenses/standard-license-152015.html
    before using. ", but it allows to use OIV Technology free.
    It might be interesting for users of Total Commander.

    Francois,
    thanks for your reply, but I'm afraid PDF is not an option. They work with Word documents, so converting to PDF is an extra step which I want to try to avoid. Furthermore I don't think there will be a performance difference between opening Word or adobe Reader...they are both slow.
    Right now they use an old Fulcrum search server application which uses outside-in viewer to show documents as a result of a search. Performance of showing the results is very fast. We have to rebuild this in Oracle forms. I'm using Oracle text to search in word documents on the filesystem. The results of the search is a multirecord block full of possible hits. By clicking on one of those record, the contents of the Word doc should be shown, IN Forms if possible, Using the PageUp and PageDown buttons the user can navigate between the documents.
    I hope you, or anybody, can help me.

  • Difference btw idoc ale and edi

    Hi all,
    I'm a beginner in abap, can anyone send me the concepts of ALE, IDOC and EDI and the difference btw all the three.
    Also do send some materials for the same.

    Hi,
    ALE (Application Linking and Enabling)
    Ale Technology is SAP’s technology to support distributed yet integrated processes across several SAP systems.
    Distributed Process:
    A distributed process is one in which part of a business process is carried out on one system and part on another. The two systems would exchange data with each other at appropriate points to stay synchronized.
    Need for Distributed Process:
    • Business in Different Geographical Locations.
    • Non availability of dedicated network.
    • Cultural and language differences in Geographical locations.
    • Running of Mission-critical Applications (Like Maintenance downtime etc.).
    • Separate up gradation of Modules.
    Distributed SAP SYSTEM – CHALLENGES
    • A system that understands the syntax and semantics of the data. It was important from the very beginning to base the distribution of data on business rules, not on database replication techniques.
    • Distributed systems that can maintain their autonomy while being integrated as one logical SAP system. The systems should be able to operate independently and support logical processing of transactions and data.
    • Distributed systems that can handle different data models. A local implementation should be able to customize the system to meet its local needs.
    • Receiving systems that can handle their own problems and not tie up the sending system.
    • Systems that maintain continued operation in spite of network failure. Changes made to either system should be synchronized after the network connection is restored.
    • A sound technology and methodology that can be used in all distribution scenarios.
    SAP Distributed environment:
    ALE allows for efficient and reliable communication between distributed processes across physically separate SAP systems.
    ALE is based on application to application integration using messaging architecture. A message defines data that is exchanged between two processes. IDocs are containers that hold data exchanged between the two systems.
    Benefits of ALE:
    • Integration with non-SAP systems: ALE architecture allows third party applications to integrate with SAP system.
    • Reliable Distribution: Once message type created and the receiver of the message is determined, ALE delivers the message to the recipient. If there is any network problem it will buffer the message and delivers the message once the network is restored. It also ensures that the message is not delivered twice.
    • Release Upgrade: Any of the distributed system can be upgraded to the new release of SAP without affecting the functionality. The ALE layer ensures backward compatibility of messages exchanged between systems.
    ALE Architecture:
    It consists of an Outbound process, an Inbound process, and an Exception – Handling process.
    Outbound Process:
    ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
    1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
    2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
    3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
    4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
    Inbound Process:
    The inbound process receives an IDoc and creates a document in the system.
    1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
    2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
    3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
    Over view of IDocs:
    IDoc is a container that is used to exchange data between any two processes. The document represented in an IDoc is independent of the complex structure SAP uses to store application data. This type of flexibility enables SAP to rearrange its internal structure without affecting the existing interface.
    IDoc interface represents an IDoc Type or IDoc data. IDoc Type represents IDoc’s definition and IDoc Data is an instance of the IDoc Type.
    IDoc Types:
    IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
    An IDoc is an instance of an IDoc Type and consists of three types of records.
    i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
    ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
    iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
    Message in IDoc Type:
    A Message represents a specific type of document transmitted between two partners.
    Outbound Process in IDocs:
    Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
    The Customer Model:
    A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
    Message control:
    Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the application logic.
    Change Pointers:
    The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
    Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
    IDoc Structure:
    A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
    Selection Program:
    Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection program’s design depends on the triggering mechanism used in the process.
    Filter Objects;
    Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
    Port Definition:
    A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
    RFC Destination:
    The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
    Partner Profile:
    A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDoc’s packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
    Service Programs and Configuration Tables:
    The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
    Process flow for Distributing Transactional Data:
    Transactional data is distributed using two techniques: with Message control and without message control.
    Process flow for Distributing Master Data:
    Master data between SAP systems is distributed using two techniques: Stand alone Programs and Change Pointers.
    Triggering the Outbound Process via Stand-Alone Programs:
    Stand-Alone programs are started explicitly by a user to transmit data from one SAP system to another. Standard Programs for several master data objects exist in SAP. Ex. The material master data can be transferred using the RBDSEMAT program or transaction BD10.
    The stand-alone programs provide a selection screen to specify the objects to be transferred and the receiving system. After the stand-alone program is executed, it calls the IDoc selection program with the specified parameters.
    Triggering the Outbound Process via Change Pointers:
    The change pointer technique is used to initiate the outbound process automatically when master data is created or changed.
    A standard program, RBDMIDOC, is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process for distributing the master data to the appropriate destination. The RBDMIDOC program reads the table TBDME to determine the IDoc selection program for a message type.
    Processing in the Application Layer:
    The customer distribution model is consulted to make sure that a receiver has been defined for the message to be transmitted. If not, processing ends. If at least one receiver exists, the IDoc selection program reads the master data object from the database and creates a master IDoc from it. The master IDoc is stored in memory. The program then calls the ALE service layer by using the function module MASTER_IDOC_DISTRIBUTE, passing the master IDoc and the receiver information.
    Processing in the ALE Interface Layer:
    Processing in the ALE Layer consists of the following steps:
    • Receiver Determination: The determination of the receiver is done through Customer Distribution Model.
    • IDoc Filtering: if an IDoc filter is specified in the distribution model for a receiver, values in the filter are compared against the values in the IDoc data records. If a data record does not meet the filter criteria, it is dropped.
    • Segment Filtering: For each sender and receiver combination, a set of segments that are not required can be filtered out.
    • Field conversion: Field values in data records are converted by using the conversion rules specified for the segment.
    • Version change for segments: Segments are version-controlled. A new version of a segment always contains fields from the preceding version and fields added for the new version. Release in IDoc type field of the partner profile to determine the version of the segment to be generated.
    • Version change for IDocs: IDocs are also version controlled. The version is determined from the Basic Type field of the partner profile.
    • Communication IDocs generated: The final IDoc generated for a receiver after all the conversions and filtering operations is the communication IDoc. One master IDoc can have multiple communication IDocs depending on the number of receivers identified and the filter operations performed. IDoc gets the status record with a status code of 01 (IDoc Created).
    • Syntax check performed: IDoc goes through a syntax check and data integrity validation. If errors found the IDoc get the status of 26 (error during syntax check of IDoc – Outbound). If no errors found the IDoc gets the status 30 (IDoc ready for dispatch – ALE Service).
    • IDoc dispatched to the communication Layer: In the ALE process, IDocs are dispatched using the asynchronous RFC method, which means that the sending system does not await for data to be received or processed on the destination system. After IDocs have been transferred to the communication layer, they get a status code 01 (Data Passed to Port OK).
    Processing in the Communication Layer:
    To dispatch an IDoc to a destination system, the system reads the port definition specified in the partner profile to determine the destination system, which is then used to read the RFC destination. The RFC destination contains communication settings to log o to the remote SAP system. The sending system calls the INBOUND_IDOC_PROCESS function module asynchronously on the destination system and passes the IDoc data via the memory buffers.
    Inbound Process in IDocs:
    An inbound process used IDoc structure, posting programs, filter objects, conversion rules, a partner profile, service programs, and configuration tables to post an application document from an IDoc.
    Posting Program:
    Posting programs, which are implemented as function modules, read data from an IDoc and create an application document from it. A posting program exists for each message. Each posting program is assigned a process code. A process code can point to a function module or a work flow. In the standard program process codes always point to a function module.
    Ex. The posting program for message type MATMAS is IDOC_INPUT_MATMAS which has a process code MATM.
    Workflow:
    A workflow represents a sequence of customized steps to be carried out for a process. The workflow management system is used to model the sequence, identify information required to carry out the steps and identify the person responsible for the dialog steps.
    Partner Profile;
    A partner profile specifies the components used in an inbound process (partner number, message type, and process code), the mode in which IDocs are processed (batch versus immediate), and the person to be notified in case of errors.
    Process flow for the Inbound process via a Function Module:
    In this process, IDocs are received from another system and passed to the posting function module directly.
    1. Processing in the communication Layer:
    The IDOC_INBOUND_ASYCHRONOUS program, triggered as a result of an RFC from the sending system, acts as the entry point for all inbound ALE processes. The IDoc to be processed is passed as an input parameter. Control is transferred to the ALE/EDI layer.
    2. Processing in the ALE/EDI Interface Layer:
    • Basic integrity check: A basic integrity check is performed on the control record.
    • Segment Filtering and conversion: Filtering out unwanted segments and carry out any required conversion of field values.
    • Creation of Application IDoc: The application IDoc is created and stored in the database and a syntax check is performed. If there are errors it gets status code of 60 (Error during Syntax check of IDoc – Inbound). At this point a tangible IDoc, which can be monitored via one of the monitoring transactions, is created and the IDoc gets status code 50 (IDoc Added).
    • IDoc Marked ready for Dispatch: IDoc gets the status code 64 (IDoc ready to be passed to application).
    • IDoc is passed to the posting program: The partner profile table is read. If the value of the Processing field is set to Process Immediately, the IDoc is passed to the posting program immediately using the program RBDAPP01.
    3. Processing in the Posting Module:
    The process code in the partner profile points to a posting module for the specific message in the IDoc. The posting program implemented as a function module either calls a standard SAP transaction by using the Call Transaction command for posting the document or invokes a direct input function module.
    The results of execution are passed back via the function module’s output parameters. If the posting is successful IDoc gets the status code 53 (Application Document Posted) or it gets status code 51 (Error: Application Document Not Posted).
    IDOC:
    Data Creation in Idoc
    IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
    asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
    While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
    IDoc is a intermediate document to exchange data between two SAP Systems.
    *IDocs are structured ASCII files (or a virtual equivalent).
    *Electronic Interchange Document
    *They are the file format used by SAP R/3 to exchange data with foreign systems.
    *Data Is transmitted in ASCII format, i.e. human readable form
    *IDocs exchange messages
    *IDocs are used like classical interface files
    IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    FOr testing you can use WE19.
    How to create idoc?
    *WE30 - you can create a IDOC type
    For more information in details on the same along with the examples can be viewed on:
    [http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404]
    [http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm]
    [http://www.sappoint.com/presentation.html]
    [http://www.allsaplinks.com/idoc_search.html]
    [http://www.sapgenie.com/sapedi/idoc_abap.htm]
    [http://www.erpgenie.com/sapedi/idoc_abap.htm]
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30 )
    Create Message Type ( WE81 )
    Assign Idoc Type to Message Type ( WE82 )
    Creating a Segment
    Go to transaction code WE31
    Enter the name for your segment type and click on the Create icon
    Type the short text
    Enter the variable names and data elements
    Save it and go back
    Go to Edit -> Set Release
    Follow steps to create more number of segments
    Create IDOC Type
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Check these out..
    [Re: How to create IDOC;
    Check below link. It will give the step by step procedure for IDOC creation.
    [http://www.supinfo-projects.com/cn/2005/idocs_en/2/]
    ALE/ IDOC
    [http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm]
    [http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc]
    [http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419]
    [http://www.netweaverguru.com/EDI/HTML/IDocBook.htm]
    [http://www.sapgenie.com/sapedi/index.htm]
    [http://www.sappoint.com/abap/ale.pdf]
    [http://www.sappoint.com/abap/ale2.pdf]
    [http://www.sapgenie.com/sapedi/idoc_abap.htm]
    [http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm]
    [http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm]
    [http://www.allsaplinks.com/idoc_sample.html]
    [http://www.sappoint.com/abap.html]
    [http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm]
    [http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc]
    [http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419]
    [http://www.netweaverguru.com/EDI/HTML/IDocBook.htm]
    [http://www.sapgenie.com/sapedi/index.htm]
    [http://www.allsaplinks.com/idoc_sample.html]
    [http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs]
    go trough these links.
    [http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm]
    [http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc]
    [http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419]
    [http://www.netweaverguru.com/EDI/HTML/IDocBook.htm]
    [http://www.sapgenie.com/sapedi/index.htm]
    [http://www.sappoint.com/abap/ale.pdf]
    [http://www.sappoint.com/abap/ale2.pdf]
    [http://www.sapgenie.com/sapedi/idoc_abap.htm]
    [http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm]
    [http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm]
    [http://www.allsaplinks.com/idoc_sample.html]
    [http://www.sappoint.com/abap.html]
    [http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm]
    [http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc]
    [http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419]
    [http://www.netweaverguru.com/EDI/HTML/IDocBook.htm]
    [http://www.sapgenie.com/sapedi/index.htm]
    [http://www.allsaplinks.com/idoc_sample.html]
    [http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm]
    An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
    1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
    2.IDOCs are independent of the sending and receiving systems.
    3.IDOCs are independent of the direction of data exchange.
    The two available process for IDOCs are
    Outbound Process
    Inbound Process
    AND There are basically two types of IDOCs.
    Basic IDOCs
    Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
    Extended IDOCs
    Extending the functionality by adding more segments to existing Basic IDOCs.
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30)
    Create Message Type ( WE81)
    Assign Idoc Type to Message Type ( WE82)
    imp links
    [http://www.allsaplinks.com/idoc_sample.html]
    [http://www.sapgenie.com/sapedi/idoc_abap.htm]
    [www.sappoint.com]
    --here u can find the ppts and basic seetings for ALE
    [http://sappoint.com/presentation.html]
    [www.sapgenie.com]
    [http://www.sapgenie.com/ale/index.htm]
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    Try this..Hope this will help.
    SAP ALE & IDOC<<<<
    Steps to configuration(Basis) >>
    1. Create Logical System (LS) for each applicable ALE-enabled client
    2. Link client to Logical System on the respective servers
    3. Create background user, to be used by ALE(with authorizaton for ALE postings)
    4. Create RFC Destinations(SM59)
    5. Ports in Idoc processing(WE21)
    6. Generate partner profiles for sending system
    The functional configuration(Tcode: SALE)
    • Create a Customer Distribution Model (CDM);
    • Add appropriate message types and filters to the CDM;
    • Generate outbound partner profiles;
    • Distribute the CDM to the receiving systems; and
    • Generate inbound partner profiles on each of the clients.
    Steps to customize a new IDoc >>>
    1. Define IDoc Segment (WE31)
    2. Convert Segments into an IDoc type (WE30)
    3. Create a Message Type (WE81)
    4. Create valid Combination of Message & IDoc type(WE82)
    5. Define Processing Code(WE41 for OUT / WE42 for IN)
    6. Define Partner Profile(WE20)
    RFC:
    RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
    and you will be passing an Import parameter DESTINATION to it.
    Other code and usage will be similar to any fun module;
    Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
    Refer this link:
    [http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm]
    check out the following link it might help you
    [http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCFESDE2/BCFESDE2.pdf]
    EDI:
    Electronic Data Interchange
    Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
    Refer
    [http://www.erpgenie.com/sapedi/index.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm]
    [https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp]
    [http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/]
    [http://www.erpgenie.com/sapedi/index.htm]
    [http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd]
    EDI FLOW :
    Here is some thing which helps you and here the purchase order is taken as example too..
    Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
    What parts of the business cycle can be supported by EDI?
    Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
    How does EDI get started?
    EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
    What is the flow of EDI?
    The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
    check this.
    [http://www.netweaverguru.com/EDI/HTML/IDocBook.htm]
    [http://www.sapgenie.com/sapedi/idoc_abap.htm]
    [http://www.sapgenie.com/sapedi/index.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm]
    [https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp]
    [http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/]
    [http://www.erpgenie.com/sapedi/index.htm]
    [http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd]
    [ALE / IDOC / RFC / EDI]
    [SAP ABAP and EDI/ALE/IDOC]
    [Re: IDOC/BAPI/ALE/EDI]
    Regards,
    Dhruv Shah

  • Can We send data from SAP to non SAP using ALE !

    In this case what will be the receiver side configuaration !
    What will be our receiver client !

    Hi,
    We can send SAP to Non-SAP system using ALE technology.
    Ex:-
    Business Connector, VB.NET system can be integrated using ALE technology over TCP/IP connection.
    Regards
    Vijayanand Poreddy

  • ALE and IDocs

    Hi Experts,
       I am very new to ALE technology, I want to check how to send the transactional data using ALE can any one please give me the steps to configure this setting, right now I am using IDES to make my self free to this, so please give me from basic steps as I think there will not be any preconfigured things in IDES.
    Thanks and Regards,
       Varun.K

    Hi,
        Check the following links and download the documents attached in the links
    http://www.sapdb.info/ale-configuration/
    http://www.ittestpapers.com/articles/858/1/SAP-ALE-Configuration/Page1.html
    Regards
    Bala Krishna

  • Explain the situation for using  ale , bapi ,session ,call transation, di

    what is the use of bdcmsgcall,
    if any erroe occur in the legacy records how to rectify it?
    In what situation we can go for lsmw.
    Kindly explain the situation's for using  ale , bapi ,session ,call transation, direct input.

    Hi ashok,
    chk this.
    the functionality of both idoc and bapi are same.
    the main difference in BAPI is it is used for Third party application like JAVA, VB etc.
    and IDOC is used transfer data from the SAP to sap or non-sap system.
    For details refer the contents below
    ALE
    ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. When a new enterprise resource planning (ERP) solution such as R/3 is implemented, companies have to interface the ERP system with legacy systems or other ERP systems.
    ALE provides intelligent mechanisms where by clients can achieve integration as well as distribution of applications and data.
    ALE technology facilitates rapid application prototyping and application interface development, thus reducing implementation time.
    The ALE components are inherently integrated with SAP applications and are robust, leading to a highly reliable system.
    ALE comes with application distribution/integration scenarios as well as a set of tools, programs, data definitions, and methodologies that you can easily configure to get an interface up and running.
    BAPI
    BAPIs provide a stable, standardized method for third-party applications and components to integrate into the Business Framework. These interfaces are being specified as part of SAP's initiative with customers, partners and leading standards organizations. Also, SAP has implemented the emerging Object Application Group (OAG) specifications with BAPIs.
    Session method.
    1) synchronous processing.
    2) can tranfer large amount of data.
    3) processing is slower.
    4) error log is created
    5) data is not updated until session is processed.
    Call transaction.
    1) asynchronous processing
    2) can transfer small amount of data
    3) processing is faster.
    4) errors need to be handled explicitly
    5) data is updated automatically
    Session method is to populate the data by filling BDC structure
    and keep as session to process from SM37 to post in appropriate Transaction.
    Call transaction method is to post the data directly into the Transaction from an Executable program.
    Session method SAP defined Function modules.
    U can see more help on the differences in the SAP help.
    hope u got an idea.
    rgds
    anver
    <i>if hlped pls mark points</i>

  • What is IDOC and ALE?

    Hi anybody,
             Please tell me what is IDOC and ALE? What pupose using IDOC and ALE?
              Give me  Example sample code  of using IDOC and ALE.
    Thanks
    S.Muthu.

    Dear,
    Here is some facts which will be helpful to clear yr concepts for ALE/IDOCs.
    Data Creation in Idoc
    IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
    While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
    IDoc is a intermediate document to exchange data between two SAP Systems.
    An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
    1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
    2.IDOCs are independent of the sending and receiving systems.
    3.IDOCs are independent of the direction of data exchange.
    The two available process for IDOCs are
    Outbound Process
    Inbound Process
    AND There are basically two types of IDOCs.
    Basic IDOCs
    Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
    Extended IDOCs
    Extending the functionality by adding more segments to existing Basic IDOCs.
    *IDocs are structured ASCII files (or a virtual equivalent).
    *Electronic Interchange Document
    *They are the file format used by SAP R/3 to exchange data with foreign systems.
    *Data Is transmitted in ASCII format, i.e. human readable form
    *IDocs exchange messages
    *IDocs are used like classical interface files
    IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
    ALE (Application Linking and Enabling)
    Ale Technology is SAP’s technology to support distributed yet integrated processes across several SAP systems.
    Distributed Process:
    A distributed process is one in which part of a business process is carried out on one system and part on another. The two systems would exchange data with each other at appropriate points to stay synchronized.
    Need for Distributed Process:
    • Business in Different Geographical Locations.
    • Non availability of dedicated network.
    • Cultural and language differences in Geographical locations.
    • Running of Mission-critical Applications (Like Maintenance downtime etc.).
    • Separate up gradation of Modules.
    Distributed SAP SYSTEM – CHALLENGES
    • A system that understands the syntax and semantics of the data. It was important from the very beginning to base the distribution of data on business rules, not on database replication techniques.
    • Distributed systems that can maintain their autonomy while being integrated as one logical SAP system. The systems should be able to operate independently and support logical processing of transactions and data.
    • Distributed systems that can handle different data models. A local implementation should be able to customize the system to meet its local needs.
    • Receiving systems that can handle their own problems and not tie up the sending system.
    • Systems that maintain continued operation in spite of network failure. Changes made to either system should be synchronized after the network connection is restored.
    • A sound technology and methodology that can be used in all distribution scenarios.
    SAP Distributed environment:
    ALE allows for efficient and reliable communication between distributed processes across physically separate SAP systems.
    ALE is based on application to application integration using messaging architecture. A message defines data that is exchanged between two processes. IDocs are containers that hold data exchanged between the two systems.
    Benefits of ALE:
    • Integration with non-SAP systems: ALE architecture allows third party applications to integrate with SAP system.
    • Reliable Distribution: Once message type created and the receiver of the message is determined, ALE delivers the message to the recipient. If there is any network problem it will buffer the message and delivers the message once the network is restored. It also ensures that the message is not delivered twice.
    • Release Upgrade: Any of the distributed system can be upgraded to the new release of SAP without affecting the functionality. The ALE layer ensures backward compatibility of messages exchanged between systems.
    ALE Architecture:
    It consists of an Outbound process, an Inbound process, and an Exception – Handling process.
    Outbound Process:
    ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
    1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
    2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
    3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
    4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
    Inbound Process:
    The inbound process receives an IDoc and creates a document in the system.
    1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
    2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
    3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
    IDoc Types:
    IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
    An IDoc is an instance of an IDoc Type and consists of three types of records.
    i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
    ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
    iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
    Message in IDoc Type:
    A Message represents a specific type of document transmitted between two partners.
    Outbound Process in IDocs:
    Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
    The Customer Model:
    A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
    Message control:
    Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the
    application logic.
    Change Pointers:
    The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
    Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
    IDoc Structure:
    A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
    Selection Program:
    Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection program’s design depends on the triggering mechanism used in the process.
    Filter Objects;
    Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
    Port Definition:
    A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
    RFC Destination:
    The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
    Partner Profile:
    A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDoc’s packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
    Service Programs and Configuration Tables:
    The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
    Process flow for Distributing Transactional Data:
    Transactional data is distributed using two techniques: with Message control and without message control.
    Process flow for Distributing Master Data:
    Master data between SAP systems is distributed using two techniques: Stand alone Programs and Change Pointers.
    Triggering the Outbound Process via Stand-Alone Programs:
    Stand-Alone programs are started explicitly by a user to transmit data from one SAP system to another. Standard Programs for several master data objects exist in SAP. Ex. The material master data can be transferred using the RBDSEMAT program or transaction BD10.
    The stand-alone programs provide a selection screen to specify the objects to be transferred and the receiving system. After the stand-alone program is executed, it calls the IDoc selection program with the specified parameters.
    Triggering the Outbound Process via Change Pointers:
    The change pointer technique is used to initiate the outbound process automatically when master data is created or changed.
    A standard program, RBDMIDOC, is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process for distributing the master data to the appropriate destination. The RBDMIDOC program reads the table TBDME to determine the IDoc selection program for a message type.
    Processing in the Application Layer:
    The customer distribution model is consulted to make sure that a receiver has been defined for the message to be transmitted. If not, processing ends. If at least one receiver exists, the IDoc selection program reads the master data object from the database and creates a master IDoc from it. The master IDoc is stored in memory. The program then calls the ALE service layer by using the function module MASTER_IDOC_DISTRIBUTE, passing the master IDoc and the receiver information.
    Processing in the ALE Interface Layer:
    Processing in the ALE Layer consists of the following steps:
    • Receiver Determination: The determination of the receiver is done through Customer Distribution Model.
    • IDoc Filtering: if an IDoc filter is specified in the distribution model for a receiver, values in the filter are compared against the values in the IDoc data records. If a data record does not meet the filter criteria, it is dropped.
    • Segment Filtering: For each sender and receiver combination, a set of segments that are not required can be filtered out.
    • Field conversion: Field values in data records are converted by using the conversion rules specified for the segment.
    • Version change for segments: Segments are version-controlled. A new version of a segment always contains fields from the preceding version and fields added for the new version. Release in IDoc type field of the partner profile to determine the version of the segment to be generated.
    • Version change for IDocs: IDocs are also version controlled. The version is determined from the Basic Type field of the partner profile.
    • Communication IDocs generated: The final IDoc generated for a receiver after all the conversions and filtering operations is the communication IDoc. One master IDoc can have multiple communication IDocs depending on the number of receivers identified and the filter operations performed. IDoc gets the status record with a status code of 01 (IDoc Created).
    • Syntax check performed: IDoc goes through a syntax check and data integrity validation. If errors found the IDoc get the status of 26 (error during syntax check of IDoc – Outbound). If no errors found the IDoc gets the status 30 (IDoc ready for dispatch – ALE Service).
    • IDoc dispatched to the communication Layer: In the ALE process, IDocs are dispatched using the asynchronous RFC method, which means that the sending system does not await for data to be received or processed on the destination system. After IDocs have been transferred to the communication layer, they get a status code 01 (Data Passed to Port OK).
    Processing in the Communication Layer:
    To dispatch an IDoc to a destination system, the system reads the port definition specified in the partner profile to determine the destination system, which is then used to read the RFC destination. The RFC destination contains communication settings to log o to the remote SAP system. The sending system calls the INBOUND_IDOC_PROCESS function module asynchronously on the destination system and passes the IDoc data via the memory buffers.
    Inbound Process in IDocs:
    An inbound process used IDoc structure, posting programs, filter objects, conversion rules, a partner profile, service programs, and configuration tables to post an application document from an IDoc.
    Posting Program:
    Posting programs, which are implemented as function modules, read data from an IDoc and create an application document from it. A posting program exists for each message. Each posting program is assigned a process code. A process code can point to a function module or a work flow. In the standard program process codes always point to a function module.
    Ex. The posting program for message type MATMAS is IDOC_INPUT_MATMAS which has a process code MATM.
    Workflow:
    A workflow represents a sequence of customized steps to be carried out for a process. The workflow management system is used to model the sequence, identify information required to carry out the steps and identify the person responsible for the dialog steps.
    Partner Profile;
    A partner profile specifies the components used in an inbound process (partner number, message type, and process code), the mode in which IDocs are processed (batch versus immediate), and the person to be notified in case of errors.
    Process flow for the Inbound process via a Function Module:
    In this process, IDocs are received from another system and passed to the posting function module directly.
    1. Processing in the communication Layer:
    The IDOC_INBOUND_ASYCHRONOUS program, triggered as a result of an RFC from the sending system, acts as the entry point for all inbound ALE processes. The IDoc to be processed is passed as an input parameter. Control is transferred to the ALE/EDI layer.
    2. Processing in the ALE/EDI Interface Layer:
    • Basic integrity check: A basic integrity check is performed on the control record.
    • Segment Filtering and conversion: Filtering out unwanted segments and carry out any required conversion of field values.
    • Creation of Application IDoc: The application IDoc is created and stored in the database and a syntax check is performed. If there are errors it gets status code of 60 (Error during Syntax check of IDoc – Inbound). At this point a tangible IDoc, which can be monitored via one of the monitoring transactions, is created and the IDoc gets status code 50 (IDoc Added).
    • IDoc Marked ready for Dispatch: IDoc gets the status code 64 (IDoc ready to be passed to application).
    • IDoc is passed to the posting program: The partner profile table is read. If the value of the Processing field is set to Process Immediately, the IDoc is passed to the posting program immediately using the program RBDAPP01.
    3. Processing in the Posting Module:
    The process code in the partner profile points to a posting module for the specific message in the IDoc. The posting program implemented as a function module either calls a standard SAP transaction by using the Call Transaction command for posting the document or invokes a direct input function module.
    The results of execution are passed back via the function module’s output parameters. If the posting is successful IDoc gets the status code 53 (Application Document Posted) or it gets status code 51 (Error: Application 
    How to create idoc?
    *WE30 - you can create a IDOC type
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30 )
    Create Message Type ( WE81 )
    Assign Idoc Type to Message Type ( WE82 )
    Creating a Segment
    Go to transaction code WE31
    Enter the name for your segment type and click on the Create icon
    Type the short text
    Enter the variable names and data elements
    Save it and go back
    Go to Edit -> Set Release
    Follow steps to create more number of segments
    Create IDOC Type
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    Try this..Hope this will help.
    SAP ALE & IDOC<<<<
    Steps to configuration(Basis) >>
    1. Create Logical System (LS) for each applicable ALE-enabled client
    2. Link client to Logical System on the respective servers
    3. Create background user, to be used by ALE(with authorizaton for ALE postings)
    4. Create RFC Destinations(SM59)
    5. Ports in Idoc processing(WE21)
    6. Generate partner profiles for sending system
    The functional configuration(Tcode: SALE)
    • Create a Customer Distribution Model (CDM);
    • Add appropriate message types and filters to the CDM;
    • Generate outbound partner profiles;
    • Distribute the CDM to the receiving systems; and
    • Generate inbound partner profiles on each of the clients.
    Steps to customize a new IDoc >>>
    1. Define IDoc Segment (WE31)
    2. Convert Segments into an IDoc type (WE30)
    3. Create a Message Type (WE81)
    4. Create valid Combination of Message & IDoc type(WE82)
    5. Define Processing Code(WE41 for OUT / WE42 for IN)
    6. Define Partner Profile(WE20)
    Important Transaction Codes:
    SALE - IMG ALE Configuration root
    WE20 - Manually maintain partner profiles
    BD64 - Maintain customer distribution model
    BD71 - Distribute customer distribution model
    SM59 - Create RFC Destinations
    BDM5 - Consistency check (Transaction scenarios)
    BD82 - Generate Partner Profiles
    BD61 - Activate Change Pointers - Globally
    BD50 - Activate Change Pointer for Msg Type
    BD52 - Activate change pointer per change.doc object
    BD59 - Allocation object type -> IDOC type
    BD56 - Maintain IDOC Segment Filters
    BD53 - Reduction of Message Types
    BD21 - Select Change Pointer
    BD87 - Status Monitor for ALE Messages
    BDM5 - Consistency check (Transaction scenarios)
    BD62 - Define rules
    BD79 - Maintain rules
    BD55 - Defining settings for IDoc conversion
    WEDI - ALE IDoc Administration
    WE21 - Ports in Idoc processing
    WE60 - IDoc documentation
    SARA - IDoc archiving (Object type IDOC)
    WE47 - IDoc status maintenance
    WE07 - IDoc statistics
    BALE - ALE Distribution Administration
    WE05 - IDoc overview
    BD87 - Inbound IDoc reprocessing
    BD88 - Outbound IDoc reprocessing
    BDM2 - IDoc Trace
    BDM7 - IDoc Audit Analysis
    BD21 - Create IDocs from change pointers
    SM58 - Schedule RFC Failures
    Basic config for Distributed data:
    BD64: Maintain a Distributed Model
    BD82: Generate Partner Profile
    BD64: Distribute the distribution Model
    Programs
    RBDMIDOC – Creating IDoc Type from Change Pointers
    This report creates IDocs from the change pointers for the specified message type. It then sends them to the receiving system and flags the change pointers as processed in respect of the specified message type.
    The receiving systems for the specified message type are determined from the customer distribution model.
    Output:-The report outputs information about the number of master IDocs and communication IDocs created.
    RSEOUT00 – Process all selected IDocs (EDI)  Report for generation of files for EDI outbound processing.The report processes the IDocs available in the system with the status 'to be processed'. The IDocs are selected according to the selection options and parameters specified.  
    It is important that you make sure that only test messages or productive messages are selected.
    The IDocs are processed in various files for various output modes and for various ports. The names of the files are created according to the naming definition for the outbound file. This definition is determined in the port definition.
    RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
    RSARFCEX - Execute Calls Not Yet Executed
    RBDMOIND - Status Conversion with Successful tRFC Execution
    RBDMANIN - Start error handling for non-posted IDocs
    RBDSTATE - Send Audit Confirmations
    For testing you can use WE19.
    Hope This will be helpful,
    Best Regards ,
    P Singh

  • ALE EDI /IDOC Documents needed

    Hi All,
      Can any body send the ALE ,EDI and IDOC Dcouments with live examples.
      My mail id is : [email protected]
    Thanks and Regards,
    Muralikrishna

    Hi
    IDOC
    Data Creation in Idoc
    IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
    asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
    While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
    IDoc is a intermediate document to exchange data between two SAP Systems.
    *IDocs are structured ASCII files (or a virtual equivalent).
    *Electronic Interchange Document
    *They are the file format used by SAP R/3 to exchange data with foreign systems.
    *Data Is transmitted in ASCII format, i.e. human readable form
    *IDocs exchange messages
    *IDocs are used like classical interface files
    IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    FOr testing you can use WE19.
    How to create idoc?
    *WE30 - you can create a IDOC type
    For more information in details on the same along with the examples can be viewed on:
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://www.sappoint.com/presentation.html
    http://www.allsaplinks.com/idoc_search.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.erpgenie.com/sapedi/idoc_abap.htm
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30 )
    Create Message Type ( WE81 )
    Assign Idoc Type to Message Type ( WE82 )
    Creating a Segment
    Go to transaction code WE31
    Enter the name for your segment type and click on the Create icon
    Type the short text
    Enter the variable names and data elements
    Save it and go back
    Go to Edit -> Set Release
    Follow steps to create more number of segments
    Create IDOC Type
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Check these out..
    Re: How to create IDOC
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    go trough these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
    1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
    2.IDOCs are independent of the sending and receiving systems.
    3.IDOCs are independent of the direction of data exchange.
    The two available process for IDOCs are
    Outbound Process
    Inbound Process
    AND There are basically two types of IDOCs.
    Basic IDOCs
    Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
    Extended IDOCs
    Extending the functionality by adding more segments to existing Basic IDOCs.
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30)
    Create Message Type ( WE81)
    Assign Idoc Type to Message Type ( WE82)
    imp links
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    www.sappoint.com
    --here u can find the ppts and basic seetings for ALE
    http://sappoint.com/presentation.html
    www.sapgenie.com
    http://www.sapgenie.com/ale/index.htm
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    Try this..Hope this will help.
    >>>> SAP ALE & IDOC<<<<
    Steps to configuration(Basis) >>
    1. Create Logical System (LS) for each applicable ALE-enabled client
    2. Link client to Logical System on the respective servers
    3. Create background user, to be used by ALE(with authorizaton for ALE postings)
    4. Create RFC Destinations(SM59)
    5. Ports in Idoc processing(WE21)
    6. Generate partner profiles for sending system
    The functional configuration(Tcode: SALE)
    • Create a Customer Distribution Model (CDM);
    • Add appropriate message types and filters to the CDM;
    • Generate outbound partner profiles;
    • Distribute the CDM to the receiving systems; and
    • Generate inbound partner profiles on each of the clients.
    Steps to customize a new IDoc >>>
    1. Define IDoc Segment (WE31)
    2. Convert Segments into an IDoc type (WE30)
    3. Create a Message Type (WE81)
    4. Create valid Combination of Message & IDoc type(WE82)
    5. Define Processing Code(WE41 for OUT / WE42 for IN)
    6. Define Partner Profile(WE20)
    Important Transaction Codes:
    SALE - IMG ALE Configuration root
    WE20 - Manually maintain partner profiles
    BD64 - Maintain customer distribution model
    BD71 - Distribute customer distribution model
    SM59 - Create RFC Destinations
    BDM5 - Consistency check (Transaction scenarios)
    BD82 - Generate Partner Profiles
    BD61 - Activate Change Pointers - Globally
    BD50 - Activate Change Pointer for Msg Type
    BD52 - Activate change pointer per change.doc object
    BD59 - Allocation object type -> IDOC type
    BD56 - Maintain IDOC Segment Filters
    BD53 - Reduction of Message Types
    BD21 - Select Change Pointer
    BD87 - Status Monitor for ALE Messages
    BDM5 - Consistency check (Transaction scenarios)
    BD62 - Define rules
    BD79 - Maintain rules
    BD55 - Defining settings for IDoc conversion
    WEDI - ALE IDoc Administration
    WE21 - Ports in Idoc processing
    WE60 - IDoc documentation
    SARA - IDoc archiving (Object type IDOC)
    WE47 - IDoc status maintenance
    WE07 - IDoc statistics
    BALE - ALE Distribution Administration
    WE05 - IDoc overview
    BD87 - Inbound IDoc reprocessing
    BD88 - Outbound IDoc reprocessing
    BDM2 - IDoc Trace
    BDM7 - IDoc Audit Analysis
    BD21 - Create IDocs from change pointers
    SM58 - Schedule RFC Failures
    Basic config for Distributed data:
    BD64: Maintain a Distributed Model
    BD82: Generate Partner Profile
    BD64: Distribute the distribution Model
    Programs
    RBDMIDOC – Creating IDoc Type from Change Pointers
    RSEOUT00 – Process all selected IDocs (EDI)
    RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
    RSARFCEX - Execute Calls Not Yet Executed
    RBDMOIND - Status Conversion with Successful tRFC Execution
    RBDMANIN - Start error handling for non-posted IDocs
    RBDSTATE - Send Audit Confirmations
    FOr testing you can use WE19.
    Check these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    Please check this PDF documents for ALE and IDoc.
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    EDI
    Electronic Data Interchange
    Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
    Refer
    http://www.erpgenie.com/sapedi/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
    https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
    http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
    http://www.erpgenie.com/sapedi/index.htm
    http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
    EDI FLOW :
    Here is some thing which helps you and here the purchase order is taken as example too..
    Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
    What parts of the business cycle can be supported by EDI?
    Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
    How does EDI get started?
    EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
    What is the flow of EDI?
    The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
    check this.
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
    https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
    http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
    http://www.erpgenie.com/sapedi/index.htm
    http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
    ALE
    Application Linking and Enabling (ALE)
    In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
    For our purpose we have two clients
    namely Client 100 and Client 200.
    System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
    Distribution of Material Master Data Between two Systems
    1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
    To do this follow the following steps
    Execute SALE Transaction Code
    On The Screen Click on Sending and Receiving Systems.
    Then Click on Logical Systems.
    Then Click Defining Logical Systems.
    Click New Entries Button
    (E.g. (LG100 sending system)
    (LG200 receiving system))
    Enter two logical system names and their description.
    Save
    Comeback to SALE Transaction Code screen.
    2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
    LG100 assign to client 100
    LG200 assign to client 200
    To do this, do the following.
    Click Assigning Client to Logical System.
    Ignore the message that comes up on the screen.
    Select client 100
    Click details button on the toolbar icon or press F2.
    In the logical system box, enter LG100.
    Click on the save Icon
    Click the back button.
    Now select client 200.
    Click details icon or press f2.
    In logical Systems box, enter LG200.
    Save
    Back.
    Comeback to SALE Transaction Code screen.
    3) Maintain RFC Destination: (TR.CODE:SM59)
    (Note: Do Not Create This Step)
    Click Create Button on the Screen
    On the Screen Maintain RFC Destination i.e LG200.
    Enter LG200 in RFC destination box.
    Connection type is 3
    Give a description for the RFC destination.
    Maintain Technical Settings on Details on Technical Settings tab
    Target Host as : SAPKDC (NOTE: Save it as a Host Name)
    Maintain Logon Details on Logon/Security tab.
    Language: EN.
    User: MMUSER200 (This is the logon for dist.)
    Client : 200
    Password: MM1234.
    Save.
    Click on create to do the above process for Client 200 in
    The client 200 system.
    4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
    Execute Maintain distribution model directly for
    creating the model.
    Click on change mode button on App tool bar of the Screen.
    Create Model View pushbutton on App tool bar of the Screen.
    A pop screen will appear in which you specify
    Short text as Distribution for MM Data.
    Enter Technical Name as LGMODEL.
    Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
    A popup screen will appear in which you specify
    Model View as LGMODEL.
    Sender as LG100.
    Receiver as LG200.
    Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
    A popup screen will appear in which you specify
    Model View as LGMODEL.
    Sender as LG200.
    Receiver as LG100.
    SAVE.
    On the same screen goto Menubar and select Environment.
    And then select Generate Partner Profiles , then execute it.
    On the Screen specify the Logical System as LG200.
    Then execute the screen.
    Click back.
    Again On the same screen goto Menubar and select EDIT.
    Again select Model View and then select Distribute.
    ****LOGIN to client 200.
    Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
    And then select Generate Partner Profiles , then execute it.
    On the Screen specify the Model View as LGMODEL
    And Specify the Logical System as LG100.
    Then execute the screen.
    Click back.
    *******Switch back to client 100 Session.
    5) Create Material using MM03 Tr.Code.
    Enter the material name as LGMATERIAL
    Industry sector as Mechanical Engineering
    Material Type as Finished Products.
    And then Click on Data Pushbutton on the App tool bar.
    Select views.
    In the select views box for materials check basic data 1 AND 2.
    Click enter icon.
    In the next screen that you get
    Give the text of the material as NEW MATERIAL.
    Base unit of measure as KG.
    Gross Weight as 200.
    Net Weight as 100.
    Weight Unit as KG.
    In the description area language (E) and material description.
    Click Save.
    Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
    6) Execute BD10 to transfer the material in which you specify
    the material as LGMATERIAL and
    message type as MATMAS (client100).
    Then a Screen will be displayed in which it shows that
    1 Master Idoc Generated .. Enter
    1 Communication Idoc Generated..Enter.
    *******LOGIN to Client 200.
    7) Execute BD11 to get the material in which you specify
    the material as LGMATERIAL and
    message type as MATMAS (client200).
    8) Execute Tr.code MM03 and give the material as LGMATERIAL
    and see that the material is displayed as it was in Client 100.
    If not follow these steps.
    9) Execute Tr.code WE19( for rectification of errors in client200).
    Specify the Existing Idoc Number and Executes it .
    A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
    10) Execute Tr.code MM03 and give the material as LGMATERIAL
    and see that the material is displayed as it was in Client 100.
    Now the Material is correctly displayed in Client 200.
    11) Monitoring of IDOCS.
    Transaction Codes:
    IDOC Display of Status: WE 05.
    IDOC Date and Time: WE07.
    Outbound:
    Step 1. Application document is created when transaction is saved.
    2. Message control is invoked.
    3. Messages are processed by system.
    4. Messages are Edited (if desired).
    5. Output (ALE / EDI) is checked
    6. Validate against Message control record from Partner Profile
    7. Application Document is saved.
    8. Entry NAST table is created for every selected output program
    along with Medium & Timing.
    9. Check for Process Immediately .
    If (yes)
    Determine Processing Program from TNAPR Table.
    ELSE
    Execute RSNASTED Program.
    10. Read Partner Profile to determine Process Code.
    11. Process Code points to the Function Module & Invoked.
    12. IDoc is generated.
    13. Check for ALE Request.
    if (Yes)
    Perform Filters, Conversions, Version Changes etc.
    Else.
    IDoc is stored in DATABASE.
    INBOUND:
    Step 1. EDI Subsystem creates an IDoc file from EDI Messages
    2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
    3. Data in Control Record is validate against the Partner Profile.
    4. IDoc is generated in Database and syntax check is carried out.
    5. IDoc file is deleted once file read.
    6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
    7. Check for Process Immediately.
    If NO
    Execute RBDAPP01 Program
    Else
    Read Process Code from Partner Profile
    Process Code Points to Function Module
    Application Document Posted.
    further help:
    check url
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/ale/configuration.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapdevelopment.co.uk/training
    And also u can get lots of inof from the below link.
    http://www.sapgenie.com/ale/why_ale.htm
    Regards

  • EDI, ALE ?

    what is the difference between EDI, ALE ?plzz explain ?

    Hi,
    1)EDI
    Electronic Data Interchange
    Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
    Refer
    http://www.erpgenie.com/sapedi/index.htm
    2) ALE
    A means of creating and operating distributed applications.
    Application Link Enabling (ALE) guarantees a distributed, but integrated, R/3 installation. This involves business-controlled message exchange using consistent data across loosely linked SAP applications.
    Applications are integrated using synchronous and asynchronous communication - not by using a central database.
    ALE consists of the following layers:
    Application services
    Distribution services
    Communication services
    Refer
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    Refer
    ALE/EDI
    ALE/EDI
    ale and edi
    Regards,
    Priyanka.

  • ALE , EDI and IDOC with MM??

    hii
    What is ALE, EDI and IDOC in SAP??
    How its linked with MM??
    Explain the above things with example
    Thanks

    Hi!
    IDOC = Intermediate Document
    IDoc or Intermediate Document is a standard SAP document format. IDoc's allow different application systems to be linked via a message-based interface.
    For more detailled information look in SAPNET under
    http://service.sap.com/EDI
    For exapmle in purchasing:
    The IDoc message type ORDERS is used to send a purchase order to a vendor.
    EDI = Electronic Data Interchange
    EDI stands for Electronic Data Interchange, which means that data is electronically transmitted from one system to another. The main requirement of EDI is that the systems of the communicating partners understand each other. Usually, the data from one partner gets mapped into the format of the other partner and vice versa.
    Supporting this there exist EDI standards (named EDIFACT, ANSIX12, ODETTE, VDA, TRADACOMS, SPEC2000, ...), where the data formatting for exchanging documents are specified. Normally the partners agree using a special standard message (for example EDIFACT message ORDERS for a purchase order).
    In the SAP system the outgoing data are stored in IDoc format. When processing a receiving document, the Inbound SAP system receives the data in IDoc format too.
    Further processing (converting/mapping from IDoc in another format and vice versa) depends on the partner agreement:
    If the partners have agreed using a special EDI standard, mapping between IDoc and  the  EDI standard is necessary. This mapping is not supported by SAP, external converters or EDI subsystems must be installed by the customers for this purpose.
    If both systems use SAP software, there is usually no need for mapping  (which can save users a lot of money). The two systems are often connected via ALE (Application Link Enabling).
    If partners are using XML, the SAP Business Connector can be used. The business connector is a tool used to help customers connect via EDI. It includes routing and mapping and is XML compatible. To read more about XML at SAP go to SAPNet Alias 'XML' (http://intranet.sap.com/XML).
    For example:
    Vendor can send the invoice by EDI creating an IDoc with message type INVOIC using IDoc Type INVOICxx. He can determine (depending on the partner agreement) how to create an IDoc for Inbound processing with FI or MM-IV.
    ALE  = Application Link Enabling
    ALE is short for Application Link Enabling. Special Basic programs support this functionaliity (see documentation of BC_MID_ALE).
    To link applications you have to configure an ALE model. It contains all relevant data about how a system's configuration (normally a central system and assigned local systems) exchange data.
    With help of the ALE technology, the distribution of contracts is possible in MM via the following business process:
    Contracts that a central purchasing organization distributes to local purchasing organizations to allow the latter to utilize the more favorable conditions they contain for the procurement of materials or external services.Each local purchasing organization sends information on its own release orders back to the central purchasing organization.
    For this purpose the contract in the central system can be copied to the local systems (with message BLAORD and COND_A). When a release order to a distributed contract is created in a local system, the release docu is automatically sent to the central system (with message BLAREL) updating the release docu of the contract in the central system.
    Precondition for this scenario is, that in all systems the used master data (material, vendor, sources of supply, ...) are the same. This master data can be distributed by ALE, which should be done before sending the contract from the central system. Available message types  for distribution of master data are:
    MATMAS (ARTMAS in retail system) for material master
    CREMAS for Vendor master
    INFREC for  info record
    SRCLST for source list
    COND_A for conditions of info record
    SRVMAS for service master data
    Technical documentation to ALE can be found by path:
              Basis Components / Middleware (BC-MID) / Application Link Enabling (BC-MID-ALE)
    The most important Transactions for testing Idoc:
    WE02 Display IDOC
    WE05 IDOC list
    WE19 Testing IDOCs
    BD87 Status Monitor for ALE Messages (reprocess)
    Notes:
    456127 FAQ: Electronic Data Interchange (EDI) in Purchasing
    536411 Sample scenario for ALE contract distribution (only internally released)
    I hope I could help you fruther
    Best regards
    Erika

  • How to transfer the transactional dat a using ale

    hi to all abap gurus
    i heard that we can transfer the transactional data ( like so data , po data ) using message control technique by ale technology . . can u please give  all steps  in message control technique with one exapmle . i searched in the forum but i did not get answer . pls points will be rewrared for good answers.  if u want to give links pls give exact links .

    Hi ,
           here is the configuration.
    MESSAGE CONTROL (USING EDI / ALE)
    For Purchase order (Message control using EDI and message type ORDERS) – STEPS
    Settings to be done in the Sending system
    From NACE
    Choose Application – EF ( Purchase order), press on condition record
    Output type – NEU – Purchase order / double click ;choose  Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11) execute. Key in the data (vendor –vendor11, name – name1, partner function  - VN, Partner – Vendor11,Medium – 6 (EDI), time – 4(send immediately), language – EN).
    Press on output types , choose NEU –Purchase order, double click,  Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time – send immediately, Transmission medium – EDI, Partner function –VN)
    Create RFC destination from SM59 (ZNARA_ALE_EDI).
    Create a port from ZNARA_ALE.
    Create partner profile vendor11 under LI and not LS. PARTNER NUMBER SHOULD BE  SAME AS THAT OF VENDOR SET IN THE CONDITION TYPE.
    In the outbond parameters of the partner profile Vendor11 key in the data (Reciever port -> ZNARA_ALE,
    Basic type –ORDERS05, Message type – ORDERS ) Go to the message control and key in the data (Application – EF, Message type – NEU, Process code –ME10, Transfer immediately )
    Create a purchase order from ME21 with data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11). System will generate an outbond Idoc automatically which can be seen from WE02.
    For Purchase order (Message control using ALE and Message type ORDERS) - STEPS
    To transfer the idoc from Client 555 to 500
    Settings do be done in 555.
    From NACE
    Choose Application – EF – Purchase order, press on condition record
    Output type – NEU – Purchase order / double click ;choose  Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11) execute. Key in the data (vendor –vendor11, name – name1, partner function  - VN, Partner – Vendor11,Medium – A (ALE), time – 4(send immediately), language – EN).
    Press on output types , choose NEU –Purchase order, double click,  Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time – send immediately, Transmission medium – ALE, Partner function –VN)
    From SALE create two logical systems and assign them to the respective clients (ZALERECV_N – 500, ZALESEND_N – 555).
    From SM59 create RFC destination with the same name as that of the receiving logical system  (ZALERECV_N).
    From BD 64(distribution model),  create a model view with Technical name ZNARA_PO (message type – ORDERS, Sender – ZALESEND_N, Receiver – ZALERECV_N). Generate partner profiles. Distribute.
    Note that partner profile will be generated under LS.
    Settings do be done in 500.
    From NACE create two logical systems and assign them to the respective clients (ZALERECV_N – 500, ZALESEND_N – 555).
    From BD 64(distribution model), keep the cursor on Technical name ZNARA_PO. Generate partner profiles. Note that partner profile will be generated under LS. Change the process code to ORDE in the inbond parameters .
    Now in client 555, Create a purchase order from ME21 with data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11). System will generate an outbond Idoc automatically which can be seen from WE02. The purchase order details will be updated in 555 thru the inbond idoc.
    IMP data for message control in  Sales order creation.
    Partner profile to be created under KU.
    Outbond parameters in the partner profile (Message type – ORDRSP, Basic type – ORDERS02, partner profile - SP) In Message control (Application – V1, Message type – BA00, Process code – SD10)
    Notes:
    Check the entries in the NAST table to see whether outbond idoc has been created successfully or not
    If you have choosen collect idocs in the partner profile, use trans code BD87 to process them
    Table EDP13 - Partner Profile: Outbound (technical parameters)
    Table EDP21 - Partner Profile: Inbond (technical parameters)
    Please reward if useful.

  • ALE/IDOC material

    Hi Experts,
    I m new into ALE/IDOC technology and wht to know in depth and Full fledge. plz suggest me some documents.
    Thanx in advance

    Hi Abdul,
    Check this matter.
    1)EDI
    Electronic Data Interchange
    Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
    Refer
    http://www.erpgenie.com/sapedi/index.htm
    2) ALE
    A means of creating and operating distributed applications.
    Application Link Enabling (ALE) guarantees a distributed, but integrated, R/3 installation. This involves business-controlled message exchange using consistent data across loosely linked SAP applications.
    Applications are integrated using synchronous and asynchronous communication - not by using a central database.
    ALE consists of the following layers:
    Application services
    Distribution services
    Communication services
    Refer
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    Check this link ALE and EDI
    Types of RFC.
    RFC:
    Remote Function Call (RFC) is the standard SAP interface for communication between SAP systems. The RFC calls a function to be executed in a remote system.
    Synchronous RFC:
    The first version of RFC is synchronous RFC (sRFC). This type of RFC executes the function call based on synchronous communication, which means that the systems involved must both be available at the time the call is made.
    Transactional RFC (tRFC) and Queued RFC (qRFC). tRFC is used mainly to transfer ALE Intermediate Documents (IDocs).
    Transactional RFC:
    If an error occurs during a synchronous remote function call, the system cannot tell at what point the error occurred (most crucially, whether the function module was actually processed in R/3 before the operation failed). Restarting a failed call is therefore a dangerous thing to do, since you risk duplicating a completed function call.
    To alleviate this problem, you can use transactional RFC, which guarantees that each function call you issue will only be executed once, even if you submit it repeatedly to the R/3 System. The system implements this safeguard by assigning a unique transaction ID (TID) to each transaction that you submit. When you attempt to process the transaction, the system checks whether that TID has already been processed. If it has, the transaction is ignored.
    Queued RFC:
    When you use transactional RFC, you cannot guarantee the order in which the function calls will be processed in the system (it is quite possible that one call might overtake another). For cases where you need to specify a particular processing order, you can use queued RFC, which is an extension of transactional RFC. In qRFC, you place each function call in a logical queue. A function call cannot be executed until all of its predecessors in the queue have been processed. Queued RFC calls are processed asynchronously
    For more information on RFC, please go through the link.
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
    In simple words, ALE is used within the organization and EDI is used betn. the business partners.
    For eg: in ALE, when you want other branches of your company to have the same data as your main branch. You transport the data through ALE methodology.
    Whereas, EDI is used for communication betn ur co. & bank or co. & transport co., etc.
    If the other end does not have SAP, then a middle layer like MERCATOR is used to convert SAP data to non-SAP data and vice-versa.
    The basic difference is that ALE is the SAP technology for communications and you do not have to depend on 3rd party sofywares for the communication. EDI is the technology which requires you to define/create a sub-system that enables data transfers and these subsystems are 3rd party tools.
    THe various types of RFCs used in the technology are
    1. Synchronous RFC
    2. Asynchronous RFC
    3. Transactional RFC (tRFC)
    You can refer these links for ALE and EDI.
    http://www.onestopsap.com/interview-Question/ale/
    http://www.onestopsap.com/interview-Question/edi/
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards

  • ALE IDOC AND EDI

    Hi
    Could u pls explain whats the use of these terminology in SAP and what's the prequisites, configuration setting and how these worked.
    thanks

    Hi,
    Application Link Enabling:Means of creating and operating distributed applications.
    The purpose of Application Line Enabling is to guarantee a distributed, but integrated, R/3 installation. This involves business-controlled message exchange using consistent data across loosely linked SAP applications. Applications are integrated using synchronous and asynchronous communication and not using a central database.
    Application Link Enabling comprises the following three layers:
    Application services , Distribution services , Communication services.
    Intermediate document (IDoc) container for exchanging data between R/3, R/2 and non-SAP systems. ALE uses IDocs to exchange data between logical systems. Non-SAP systems can use IDocs as the standard interfacefor data transfer.
    IDocs are created when message types and (object) methods are distributed. The message type is the format in which the data for a specific business process is transferred.
    Electronic Data Interchange.
    Electronic exchange of structured data, such as business documents, between domestic and international business partners that use different hardware, software and communication services. For this purpose, the data involved is formatted according to predefined standards.
    In addition to this, the SAP ALE technology is available for data exchange within a company.
    Prase

  • What is the need of ALE/ IDOC

    Hi All,
    What is the need of ALE/ IDoc and why we go for ALE?IDOC with conditions
    Let me know the answers if anyone have the solution
    Regards'
    Ramesh

    ALE (Application Linking and Enabling)
    Ale Technology is SAP’s technology to support distributed yet integrated processes across several SAP systems.
    IDocs (Intermediate Documents) are the crux of ALE. These are the documents with the help of which data is exchanged between SAP R/3 and non-R/3 systems. As the name suggests, these documents act as intermediate storage of information, which can be sent bi-directionally. Message types are responsible for creation of Idocs.
    IDocs
    Data Creation in Idoc
    IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
    asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
    While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
    IDoc is a intermediate document to exchange data between two SAP Systems.
    *IDocs are structured ASCII files (or a virtual equivalent).
    *Electronic Interchange Document
    *They are the file format used by SAP R/3 to exchange data with foreign systems.
    *Data Is transmitted in ASCII format, i.e. human readable form
    *IDocs exchange messages
    *IDocs are used like classical interface files
    IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    FOr testing you can use WE19.
    How to create idoc?
    *WE30 - you can create a IDOC type
    For more information in details on the same along with the examples can be viewed on:
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://www.sappoint.com/presentation.html
    http://www.allsaplinks.com/idoc_search.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.erpgenie.com/sapedi/idoc_abap.htm
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30 )
    Create Message Type ( WE81 )
    Assign Idoc Type to Message Type ( WE82 )
    Creating a Segment
    Go to transaction code WE31
    Enter the name for your segment type and click on the Create icon
    Type the short text
    Enter the variable names and data elements
    Save it and go back
    Go to Edit -> Set Release
    Follow steps to create more number of segments
    Create IDOC Type
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Check these out..
    Re: How to create IDOC
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    go trough these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
    1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
    2.IDOCs are independent of the sending and receiving systems.
    3.IDOCs are independent of the direction of data exchange.
    The two available process for IDOCs are
    Outbound Process
    Inbound Process
    AND There are basically two types of IDOCs.
    Basic IDOCs
    Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
    Extended IDOCs
    Extending the functionality by adding more segments to existing Basic IDOCs.
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30)
    Create Message Type ( WE81)
    Assign Idoc Type to Message Type ( WE82)
    imp links
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    www.sappoint.com
    --here u can find the ppts and basic seetings for ALE
    http://sappoint.com/presentation.html
    www.sapgenie.com
    http://www.sapgenie.com/ale/index.htm
    Check these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    Please check this PDF documents for ALE and IDoc.
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    Regards,

Maybe you are looking for

  • Ipod touch 3rd Gen Still Making G4 Crash

    I thought we had corrected this issue but it has not been corrected. Have a G4 Mac 733 Mhz running 10.4.11 When Ipod Touch 3rd Gen is plugged into usb hub that is separately powered by its own brick the computer locks up. Everything just freezes up..

  • Lenovo stopped shipping to 3rd party freights

    Lenovo stopped shipping to 3rd party freights? I wanted to get 755M SLI card for a SINGLE 755M powered y510p in India, where it is not available. I wanted to order it to send it to a forwarder who can get it to india for me from  the US. I have not o

  • How can I disable DNS queries in Firefox (when using a proxy) ?

    I am behind a "Chinese wall" and use an HTTP proxy to tunnel and encrypt my data traffic. Unfortunately, Firefox still sends DNS queries for the websites, that I visit and reveals more information than I want. Is there a way to disable DNS, when I us

  • Scurity in web services

    Hi, I created a web service based on PL/SQL procedure using Jdeveloper, OC4J and now I would like to know all the options that exists for security (SSL, user/password, etc).... Is there any .pdf /whitepaper / Guide of security in Oracle Web services

  • TS4000 After a near disaster on June 30...

    our tech guy installed Lion on my boss's computer and we migrated over 2,200 calendar entries from me.com to iCloud.  She's now getting audible and visible reminders from 3 years ago as well as current ones. Any thoughts?