Usage of FM's required for PO and SC

Hi All,
I have a requiremnt to use the following FMs
BBP_PD_PO_GETDETAIL
BBP_PD_SC_ITEM_GETDETAIL
BBP_PD_SC_GETHISTORY
BBP_PD_GETHISTORY
I need the functonality of these FMs
and the mandatory input parameters we have to pass ?
regards
lakshmi

Hi,
Please have a look at the SRM Code Sample Section in Wiki, I have added some useful codes which might be of help.
https://wiki.sdn.sap.com/wiki/display/SRM/SRMCodeSamples
Besides, if you could explain your requirement first then we would be in a better position to explain the usage or suggest alternatives.
Regards
Kathirvel

Similar Messages

HT2731 is iTunes Store account really required for downloading and installing free Apps?

is iTunes Store account really required for downloading and installing free Apps?

Yes. The apps you buy are registered in your account, so you can download them in all your devices

Different PPV account required for GR and IR

Hi Experts,
I have an issue about the requirement that different PPV account required for GR and IR for the correcording Valuation class.
Eg: when do the GR,the PPV account should be 3528***, but when do the IR, the PPV account should be 3522***.
Any body can tell me how to fulfil this requirement? Thanks in advance!
Regards
Jimmy

hi
please clarify PPV
gl accounts are maintained in OBYC ,better to aksur Fi person

Why is a sender communication channel not required for IDOC and PROXY ?

Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.

You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj

Table required for billing and RG1 output

Dear all,
pls give me the list of tables required for billing output and RG1 output

Hello Digs,
Just check out these sites and see if this is useful to you
http://www.erpgenie.com/abap/tables_sd.htm
http://www.erpgenie.com/saptech/transactions.ht
**Reward if this helps**
Regards
AK

Zip files required for Reporting and Analysis

Hi All,
Kindly share me the Zip files(File Name) required for configuring the Report and Analysis for the version 11.1.1.3.
Thank and Regards
ChiDam

Depends which products, have a look at - http://docs.oracle.com/cd/E12825_01/epm.111/epm_install_11114/frameset.htm?ch02s02s03.html
It says 11.1.1.1.4 but just change it to 11.1.1.3
Cheers
John
http://john-goodwin.blogspot.com/

Requirement for client and server installation

Hi,
I am using Oracle database 10g and Oracle Developer 10g.I'd like to make a client server application.
1. What installation is required for the server side?
2. What installation is required for the client side?
3. I'd like the client to access the form application using internet browser.What are the configuration should I fullfil?
Many Thanks,
Imelda

Hi,
there is no client-server anymore in Oracle Forms. Its a web only deployment. So 1-2 no longer apply.
3) You need to install Oracle Jinitiator on the client or the Java 1.4 Plugin. Both can be configured for automatic installation.
See the Oracle Application Server documentation and whitepapers on otn.oracle.com/products/forms to learn about how to install and run Forms Services
Frank

Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
Regards

Hi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram.

Exchange 2013 IOPS Requirements for ActiveSync and anti-virus

I am currently planning to replace my Exchange 2003 server with Exchange 2013. I have used the Exchange Server 2013 Role Requirements Calculator but I'm stuck on how much additional IOPS to add for ActiveSync and my anti-virus solution (Symantec Mail Security
for Microsoft Exchange). The only info I've found for ActiveSync in regards to additional IOPS is to add .5 but nothing for SMSMSE. Symantec's web site has nothing on this (the question has been asked but not answered). I've also seen the ActiveSync question
asked but not answered.
Any advice or guidance would be appreciated.
Thank you.

Only Symantec can answer that for the A/V, but for ActiveSync, assuming you are using mostly Android/iOS, I would recommend using 1.3 for both IOPS Multiplication Factor and Megacycles Multiplication Factor.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Hardware Requirements for OC4J and Oracle DB

Hi,
I'm looking for some information about hardware requirements for a server that will run a Oracle DB and OC4J. It will be used for training purpose (about 10 people) and for running small apps using ADF.
Does anybody knows how much hardware I need?
Is there any documents from Oracle for hardware requirements?
Any help appreciated. Thanks

Greetings,
We routinely develop and test on a Dell Vostro laptop with OS Windows XP and 4GB RAM. The key is to either run the Oracle db in a VM (10.2.0.1) with at least 0.5 GB RAM for the VM or use the XE db. I personally prefer the XE db as it is lightweight and easily configured or uninstalled. As far as oc4j is concerned, a lot can be done to improve the efficiency by modifying the oc4j.cmd file in driveletter:/oc4j/bin:
set JVMARGS=-Xmx512m -XX:-UseGCOverheadLimit -server -XX:MaxPermSize=256m -Dclass.load.trace=class-not-found -Dclass.load.log.level=finestThe JVM args settings are fully explained at:
http://java.sun.com/javase/technologies/hotspot/vmoptions.jsp-Michael
Edited by: Michael F. Hardy on Jan 28, 2009 7:20 AM

Report Requirment for YTD and individual fisc periods

Hi Team,
I have a requirement in the report that should have the below structure
                      Fiscal Year      Actual Actual Actual   Actual                                                 Actual    Actual
                                                YTD      2008     2009   2010                                                      2011     2012
Char1 Char1 FiscalPer                                                APR 2010 MAY2010 .... MAR2011
Fiscal Year and Fisc period are in column and Char1 and Char2 are in Rows of the report.
For a particular year alone, I need the actual amount splitted on fiscal year period and rest of the past and furture years the actual amount should be aggregated for the year.
Please let me know if have come across this scenario.
Regards,
Ramesh
Edited by: ramesh kumar on Aug 10, 2010 5:52 AM

Hi Ramesh,
I am assuming your scenario as followes -
If User enters year(user entry variable) - 'Y1', You need to display key figs by - 'Y1Period 1'....... 'Y1Period 12'. For rest of the years(future and past from Y1), data should be aggregated and displayed per year.
The solutions would be -
Create Restricted Key Figs, for Y1Period1 - restrict it to user entry variable for year(Y1) and then to posting period hard coded to 1. Similalry create rest of the key figs for each period by changing the hard coded period value for 1 through 12.
Create restricted key fig for past years from Y1 - restrict it to user entry variable for year(Y1) and then add offset of '-1'. Simmilarly create rest of key figs for other previous years by increaing offset -2, -3 so on.
Create restricted key fig for future years from Y1 - restrict it to user entry variable for year(Y1) and then add offset of '+1'. Simmilarly create rest of key figs for other future years by increaing offset +2, +3 so on.
Hope this helps.
Regards,
Pritesh.

Business objects and start events required for CO11N and CO13 transactions

Hi,
We do production order confirmation and cancellation in CO11N and CO13 respectively. Can somebody please tell me the corresponsing business objects and the start events for them? This is a very urgent issue, I will surely rewad good points.
I guess we need to use AFVC_PM object and "finalconfirmation" event for the confirmation.
Please confirm this and kindly suggest the same for cancellation.
Thanks,
Max

Hi Max,
You will have to use the object BUS2005 - which is for Production order.
If you do not have Required events in the BO, you will have to extend object to add those custom events e.g. Cancellation event.
In this case you wil have to use Status management technique for raising events if standad transaction is not raising them.
Hope following SAP Help link might help you to start off..
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aed5453d11d189430000e829fbbd/content.htm
Regards,
Akshay Bhagwat

Configurations required for PME and SCE in SAP-CRM 2007

Hi Friends
How to configure the PME and SCE in SAP-CRM 2007.
If u have any documentation avilable for those two topics regading the implementation of e-Commerce application.
Waiting for ur reponse..
Regards
Satish.

Hi Mia,
Authorization group is available in the old versions and basically this help in defining new authorization groups and you can define what can be done with these authorization groups as what can be edited and what cannot be and this is done on SPRO. These authorization groups are entered in the authorization group and the user who has this authorization object will be able to work on the account.
So the business role in CRM 2007 has a PFCG role and the authorization profile that you created are assigned to the business role and users are assigned to the business role.
There are also few authorization objects to maintian the BP relationship and see if you can use these combination to check if it meets your requirement.
Hope it clarifies and if useful please reward points
Thanks
Srini

Security Issues - No password required for unsleeping and screensaver

I checked the box under security to 'require password when waking from sleep/screensaver' or whatever its called. It worked fine for like 2 weeks...i activate screensaver or sleep the laptop and have to put in a password to get out of it. Now when I wake or unsleep it, no password is required...what can I do? I cannot find any pattern or installation/change I made to cause this at all.
MacBook Pro 1.83 with OS 10.4.6 (all latest updates and firmware)

I deleted 3 plist preference files, the checkbox still remained for the require password option. I did a reboot and the checkbox was still there, and didnt work properly. I did the uncheck/check deal and blam...started to work properly again. Thanks for your help!

Authorization object required for materail and vendor.

Hi All,
I have Z report where material and vendor are there on the selection screen.I need to put authorization check on materail and vendor. Can u plz suggest which authorization object I should use for this?
thnks
MSi

On the other hand, assuming your program will run in a properly maintained SAP installation, I would always use standard authorisation objects as much as possible. Try finding a standard SAP report with similar selections and output and see how it is done there. Trace the execution via ST01 and see which objects are being checked.
Also use the repository infosystem to browse the available standard objects. Talk to a functional and/or security expert to clarify your requirement regarding necessary authorization checks.
Thomas

Usage of FM's required for PO and SC

Similar Messages

Maybe you are looking for