Usage of Variable Transport Binding(Receiver SOAP adapter) in multimapping

Hi All,
Mentioned below is the flow of the scenario that I am facing issues with:
ECC -> PI (A) -> PI (B) - Receivers(1,2,3..n)
I am working on PI(A).
An Idoc containing multiple Plants is triggered which is mapped to an XML in PI(A).
Depending on the number of Plants in the Idocs, that many XMLs are created in PI(A) using multimapping.
These XMLs are then sent to PI(B) which would route it to different receivers.
But PI(A) should send the party name to PI(B) for routing.
For this I am using dynamic configuration. If there are 'N' party names based on 'N' plants, always the last part name is being sent to PI(B).
Is it possible to send all the party names associated with each XML(/plant) without overriding?
As mentioned in the below table, an Idoc is triggered with 3 Plants. 3 XMLs are generated each for a different party. But only the last party i.e. C is being sent to PI(B) using dynamic configuration overriding A and B.
Plant
Party Name
Output
1
A
2
B
3
C
C
Please help me to resolve this issue.
Regards,
Vishal

Hello,
DC is not supported in multimapping.
But, where exactly u want to send the party name? In the xml file u want that party name to be there?
If yes, then there are 2 options either use AM as shown below or u can use variable substitution (search SDN u will find quite a few blogs/wiki on the same)
A new approach: Multi-mapping Dynamic Configuration using a generic custom module
Thanks
Amit Srivastava

Similar Messages

SOAP Use Adapter-Specific Message Properties and Variable Transport Binding

Hi Friends,
   I am new to use to Soap Adapter. Please help me out bellow doubts.
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
   2. Where exactly we r using below parameters.
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Thanks&Regards
G.Bhanuprakash

Hi,
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
SAP Help says both are needed to be checked when you want to process adapter attributes
Configuring the Receiver SOAP Adapter - SAP NetWeaver Exchange Infrastructure - SAP Library
These attributes can be get/set using dynamic configuration and their technical names are what you have pasted:
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Remote User - the username used to send a message to the adapter engine using SOAP
Remote Host - hostname which the remote user used
SOAP Action - SOAP Action of the XI webservice (sender) / SOAP Action of the receiver webservice
Variable Headers are additional key-value pairs in the HTTP Header that could be accessed in the XI Header using dynamic configuration. The limit is only three though.
Regards,
Mark

Error when using Variable Transport Binding in Sender Mail Adapter

Hi,
I am using the Sender Mail Adapter to receive an email, convert the attached tab delimited text file into xml and map it to an IDOC.
I am using PayloadSwapBean and MessageTransformBean in order to do this, and this all works perfectly.
I am now trying to access the Adapter Specific Message Attributes to retrieve the SHeaderFROM attribute from the message and map it to a field in the idoc.
However when I check the "Variable Transport Binding" option in the Advanced tab of the mail adapter, the message no longer goes through to SXMB_MONI and I get the following error in the Java logs.
Transmitting the message to endpoint http://sapserver:53500/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during parsing of SOAP header.
Any ideas why this is happening?
Thanks,
Brad

Hi Luciana,
Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
Good luck!
Cheers,
Brad

Variable Transport Binding - Soap Sender

Hello all,
I'm trying to retrieve a parameter from the HTTP header of a SOAP request.
I have created a SOAP sender communication channel, checked "Set Adapter-Specific Message Attributes" and "Variable Transport Binding", and entered the name of the parameter in Variable Header (XHeaderName1).
When I send the SOAP request, DynamicConfiguration exists with all standard parameters, but there is no XHeaderName1...
If I try the same with sender HTTP adapter, it works fine.
In the other way, if the dynamic configuration parameter XHeaderName1 already exists, and I try to add it in a HTTP header parameter in a receiver SOAP CC, that works.
Does somebody know why this doesn't work in the sender one?
Thanks,
Greg
PS: I'm using PI7.0 SP14

Hello,
I can see in dynamic configuration, with the namespace http://sap.com/xi/XI/System/SOAP, the standard HTTP parameters like SServerHost, SRemoteUser, etc...
But if I add a HTTP header parameter in the SOAP request, and I try to retrieve it with the SOAP sender CC, the parameter is not added in the dynamic configuration. If the name of the added HTTP header parameter is "TestParam", I put "TestParam" in the XHeaderName1 field of the sender CC, but the value is not added in the dynamic configuration. This is my problem.
Thanks,
Greg

Mail sender adapter with Variable Transport Binding doesn't work

Hi,
we have PI/700 SP7.
An external partner sends an email with one attachment (a simple csv file).
I take "PayloadSwapBean" (with swap.keyName = payload-name) to get the attachment.
Both, the Adapter-Specific Message Attributes indicator and the Variable Transport Binding indicator are set.
I set the mail package format indicator too.
What I need is the sender, receiver and subject of the mail plus the attachment.
Unfortunately it is not possible to read in the email with this configuration - I get an error.
If I unset the Variable Transport Binding indicator - I get the email but without "sender, receiver and subject" in "SHeaderFROM, SHeaderTO, SHeaderSubject". The "mail package" is overwritten by the attachment.
Is it a problem of the namespace "http://sap.com/xi/XI/System/Mail"?
Do I have to define this namespace or do I have to import a content (SAP BASE 700, SP7 is imported)?
Please help...
Regards
Wolfgang

Hi Wolfgang,
I hope it is not due to the namespace.
This might help you.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Need some Guide regarding Configuration of Sender Mail Adapters....
Regards
Agasthuri Doss
Message was edited by: Agasthuri Doss Baladandapani

More than 10 Authentication Keys in receiver SOAP adapter

Hi
My requirement is that I need more than 10 authorization/authentication keys in the receiver SOAP adapter. Is this possible?
Advanced tab -> Use adapter-specific message attributes -> variable transport binding -> view authorization keys.
Only 10 entries are provided here. Can I extend this somehow?
Thanks!
regards Ole

Yes..
These links will help u in it
Certificate Authentication with SOAP Receiver
Certificate Authentication with SOAP Receiver

Receiver SOAP Adapter error

Hi All,
         I am getting this response error message in my receiver SOAP Adapter while invoking a synchronous webservice.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <ProcessMessageResponse xmlns="http://Sleek.Integrator.Messaging" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ProcessMessageResult>Value cannot be null. Parameter name: Request string is a null reference.</ProcessMessageResult>
</ProcessMessageResponse>
Thx in advance
Ravijeet

Hi All,
         I am still getting the same error value is null. I am not able to track what could be the cause of the error. If I am taking the message from SXMB_MONI and using it in a client tool it is successfully calling the webservice.
Do we need to explicitly mention in some configuration that content type is soap/xml. SOAP header is omitting the content type or is not specifying "soap/xml" as the content type.
I am interacting with a WAF websevice, is there any compatibilty issue with Windows Webservice and SAP XI?
Also what should I pick as the SOAP Action from this wsdl file definition
<wsdl:portType name="IMessageProcessor">
          <wsdl:operation name="ProcessMessage">
               <wsdl:input message="tns:IMessageProcessor_ProcessMessage_InputMessage" wsaw:Action="XXX.Messaging/ProcessMessage"/>
               <wsdl:output message="tns:IMessageProcessor_ProcessMessage_OutputMessage" wsaw:Action="XXX.Messaging/ProcessMessageResponse"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:service name="MessageProcessor">
          <wsdl:port name="BasicHttpBinding_IMessageProcessor" binding="i0:BasicHttpBinding_IMessageProcessor">
               <soap:address location="http://XXX.com/cardax/provisioningservice"/>
          </wsdl:port>
Thx in advance
Ravijeet

Error using SSL on Receiver Soap Adapter

Hi there,
I'm having some problems on connecting to a third-party application running a webservice (meaning, through Receiver Soap Adapter). The third-party appl. demands us to use a SSL connection (its url starts with https), with user authentication through certificate.
We've installed SAP Java Cryptographic toolkit and have a proper certificate configured on the KeyStorage entry, on Visual Administrator.
On Soap Adapter, I've configured HTTP Transport Protocol and have selected the "configure certificate authentication" option and selected the certificate, filled the mandatory fields (target URL and soap action) but I keep getting this error message on SXMB_MONI: "com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket".
Is there anything else than installing SAP Java Cryptographic Toolkit to enable SSL on Soap Adapter? Is there another configurations that need to be done?
Thanks in advance,
Henrique.

Hi
can u please tell me, how u r able to resolve the problem
i am also stuck in the same error
basically i am working on SSO b/w three systems.
EP>XI>R/3
i am able to do the SSO between the EP-->XI
but when i try with EP-->XI->R/3 it is giving me error at the receiver side means receiver soap adapter is not accepting the SAP Logon Ticket.
can u please tell me what entries should be given in the certificate authentication fields.
please provide the solution.
Thanks & Regards
Rinku Gangwani

Receiver SOAP adapter - User authentication question

XI experts,
Here is the scenario - IDOC > XI > SOAP - Ansynchronous call..
I need your all help to understand the user authentication on the "Receiver SOAP Adapter"... We are using "HTTP" transport protocol.
I believe, the userid which we entered in the communication channel needs to have proper security on the web server. The Web server URL starts with "http://lsme
01.xyz.com/...." .
Question : Is this usrid and password will be encrypted when XI calls this web service?
If an answer is "NO" then is there anyway we can encrypt it?
Thanks in advance!
Points will be given..
MP

XI experts,
I need an answer to the following question....
The Web server URL starts with "http://lsme01.xyz.com/...." .
Question : Is this usrid and password will be encrypted when XI calls this web service?
If an answer is "NO" then is there anyway we can encrypt it?
Thanks in advance!
Points will be given..
MP

Receiver SOAP Adapter - Dynamic username & password

Hi,
I am working on a scenario where the receiver SOAP adapter will have dynamic user name & password. but the URL remains same. how do we achieve this.
Thanks,
Mahesh

Hi Baskar,
I have checked all your Replies in SDN related to SOAP Header Creation for Wssec Web Service.
I am working on a Interface (CRM Proxy to Web Service having wssec) in PI 7.0 SP6. I have created the SOAP Header by using XSLT mapping to pass the username token and password but hardcoding user credentials in the XSLT mapping doesn't sound too neat. And transporting it from D to Q to P is even worse.
And also i have 2 username and 2 passwords to access to different instances in the same web service. So i have to pass the different Username and Password based on the Instance in SOAP header dynamically using XSLT mapping.
Therefore i request you help me out on how to pass the Username and password dynamically in the XSLT mapping to Create dynamic SOAP Header to access different instances.
If possible can you provide step-by-step aproach including XSLT mapping and Code for dynamic SOAP Header creation.
Thank you very much for your valuable inputs.
Regards,
Ajay Kodali.

Receiver SOAP Adapter (HTTP AXIS)

Hi Experts,
I need to use receiver soap adapter to communicate with a WebService, actually it is a AXIS service i can see when i give the soap url in web browser.
my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
when i use SoapUI to test the webservice, it works fine. But when i use receiver soap adapter with HTTP (without AXIS), it is responding with the belwo error.
<sap:Error ...>
<sap:Category>Application</sap:Category>
<sap:Code area="UNKNOWN">APPLICATION_ERROR</sap:Code>
<sap:AdditionalText>Application Fault</sap:AdditionalText>
<sap:ApplicationFaultMessage namespace="http://sap.com/xi/XI/System/Axis/sample">host name</sap:ApplicationFaultMessage>
<sap:Stack/>
</sap:Error>
Experts, please help on this, the major question is HTTP AXIS is required when target web service is an AXIS service?
Thanks in advance.
Regards,

>>my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
You are going to consume webservice. You can use standard SOAP adapter itself to consume the webservice that is built with axis framework.
Do you have some specific user authentication procedures like SAP Assertion Tickets, username token etc and some specific encapsulation formats (MIME, DIME, MTOM),WS Reliable Messaging and so then you need SOAP Axis adapter. If you need to consume webservice with standard transport protocol (HTTP or HTTPS) and client authentication etc , our standard SOAP adapter is more than enough.
Refer this link what axis soap adapter supports

In what QOS does the receiver SOAP adapter work BE or EO?

Hi,
In what QOS does the receiver SOAP adapter work BE or EO?
My guess is that it is by default EO, if so how do i make it work like synchronous?
There is no option to set it explicitly.
Thanks]
Shakthi

Siva,
In receiving adapter you can't set the status. The receiving QOS is set in the pipeline by using the Sender Comm.channel QOS.
So for example in SOAP to SOAP scenario, if you set the Sender comm.channel as BE, then through out the Pipeline till it reaches the Receiver Comm.channel the QOS will be considered as BE only( Even though you didn't explicitly said to the Receiver comm.channel).
Hope it helps!
raj.

Error in the Receiver SOAP Adapter

Hello Experts,
I am sending an order number by running a report on the ECC 6.0 server to a web service for publishing the information on the web site. The receiver side is configured as Receiver SOAP Adapter . I am getting the following error in the SXMB_MONI Transaction.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Not enough message parts were received for the operation.
Kindly let me know to overcome this problem.
Thanks
Best Regards
S Joshi

Hi Ramesh,
The message Iam getting in MONI is as follows:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Not enough message parts were received for the operation.
This is the response for the request that i am sending for order creation. I did checked the fields also it is same and the values of the fields too. they all are correct. Over and above this it was working fine till last week , but suddendly this week I am getting this error.
Regards

PI 7.1 receiver SOAP adapter using https

Hi all,
In PI 7.1 receiver SOAP adapter using https, what are the configurations necessary in PI box?
Certification, and key store values, security etc etc
-Michael.

>
Michael Johnson wrote:
> I did n't find anything related to 7.1 version
Some leads are provided by help: http://help.sap.com/saphelp_nwpi71/helpdata/EN/56/992d4142badb2be10000000a1550b0/frameset.htm
Regards,
Abhishek.

Error in applying security settings in Receiver SOAP Adapter

Hi,
I've used Web Services Security (Oasis standard) and the digital signature and encryption certificate in receiver SOAP adapter and the corresponding Sender Agreement, for adding digital signature and encrypting the message. While sending the message we are getting an error in the adapter engine as below. If anyone can throw light on this it'll be highly appreciated :
2008-07-18 17:00:21 Error SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.security.PrivilegedActionException: com.sap.aii.af.security.impl.exception.MessageSecurityException: MessageSecurityException in Method: ApplyMessageLevelSecurity.run(). AccessControlException. Please check that your Code has the XiSecurityRuntimePermission.Context: com.sap.aii.af.security.impl.exception.MessageSecurityException: Exception in Method: apply( Message, CPALookupObject ). General exception, no further informations. Message: MessageSecurityContext in Method: apply( Message, CPALookupObject ). ApplyThread-Exception Message: SAXException in Method: run().; To-String: com.sap.aii.af.security.impl.exception.MessageSecurityException: SAXException in Method: run().. To-String: com.sap.aii.af.security.impl.exception.MessageSecurityException: MessageSecurityContext in Method: apply( Message, CPALookupObject ). ApplyThread-Exception Message: SAXException in Method: run().; To-String: com.sap.aii.af.security.impl.exception.MessageSecurityException: SAXException in Method: run()..
2008-07-18 17:00:21 Error Exception caught by adapter framework: java.security.PrivilegedActionException: com.sap.aii.af.security.impl.exception.MessageSecurityException: MessageSecurityException in Method: ApplyMessageLevelSecurity.run(). AccessControlException. Please check that your Code has the XiSecurityRuntimePermission.Context: com.sap.aii.af.security.impl.exception.MessageSecurityException: Exception in Method: apply( Message, CPALookupObject ). General exception, no further informations. Message: MessageSecurityContext in Method: apply( Message, CPALookupObject ). ApplyThread-Exception Message: SAXException in Method: run().; To-String: com.sap.aii
2008-07-18 17:00:21 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.security.PrivilegedActionException: com.sap.aii.af.security.impl.exception.MessageSecurityException: MessageSecurityException in Method: ApplyMessageLevelSecurity.run(). AccessControlException. Please check that your Code has the XiSecurityRuntimePermission.Context: com.sap.aii.af.security.impl.exception.MessageSecurityException: Exception in Method: apply( Message, CPALookupObject ). General exception, no further informations. Message: MessageSecurityContext in Method: apply( Message, CPALookupObject ). ApplyThread-Exception Message: SAXExce.
Thanks,
Dipankar

hi dipanker,
check the note 856597
its usefull
regards
kummari

Usage of Variable Transport Binding(Receiver SOAP adapter) in multimapping

Similar Messages

Maybe you are looking for