Usage profile for CE

Hi,
I get the following message after I start the ESR from CE.
You are using the default profile. Business modeling is not possible. Change your business profile to be able to use business modeling.
Is it possible to get another profile to see the Business modeling with the trail version?
Many thanks & regards,
Hai

Hi,
You have deployed the correct SCA files only. You have to get the three available profiles: Process Integration , Service Defination and unrestricted. I think you might have missed some steps.
Have you done post installtion configuration steps.
In [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20c58fff-0c62-2b10-4381-9ac4d920a8cc] installtion doc for EHP1, you can find those steps.
make sure that you have done all the given post installation stpes for ESR.
Thanks

Similar Messages

  • "Calculate Average" option for the Activity Usage Profile doesn't work

    I have the same problem as poster 793128 in a comment for a different thread: the "calculate average" profile option doesn't work for units (it works for cost though). I've used this option a lot on previous versions of Primavera but for some reason is not working on our new P6 release 7 (stand alone). As 793128’s post says: nothing happens, nothing changes, the profile keep showing totals, doesn't matter if the "base hours on time period" box is selected or if the divider is input by the user.
    The same option (calculate average / divide by) on the resource usage spreadsheet and on the tabular reports do work as expected so doesn't seem to be that I checked the wrong box for some user or administrator preference set up.
    Thank you for any help or clue. I posted this as a different thread because my original post was in a resource profile thread for a different issue that was already answered.

    *793365,*
    After reading your post I tested an older layout of mine that uses a similar setup and it still operates fine. On the "Resource Usage Profile Options" box under the "Graph" tab, I have "Calculate Average" checked and "24" entered in the "Divide interval totals by:" box.
    This allows my resource profile to display manhours per day for me.
    Some of my background info:
    I run in a multi-users platform and not in a stand alone setup.
    We have different resources loaded into the schedule with multiple calendars.
    I have several "Resource Filter/Group Names" setup for each separate resource on the "Data" tab too.
    Hope this helps,

  • Do I need to set AI colour profiles for use in ID?

    My previous set up:
    Mac
    CS2 (Illustrator, Photoshop, Bridge)
    Quark XPress 7
    My new set up:
    PC (Win 7)
    CS5 (Illustrator, Photoshop, Bridge, InDesign)
    My problem:
    I work for a company that prints newspapers, but my dept also does work for glossy sheetfed printers (magazines leaflets etc)
    All my work is exclusively CMYK.
    With my previous set up - I didn’t want to have to switch my colour profiles via Bridge as I was constantly juggling two types of jobs:
    Our tabloid press - Profile - ISOnewspaper26v4 (CMYK)
    Sheetfed Printers - Profile - ISO Coated V2 (Fogra 39) (CMYK)
    So I set my CS2 Suite colour settings to  ISO Coated V2 (Fogra 39) and set an action in Photoshop to convert jpegs / eps photos to ISOnewspaper26v4.
    So my CS2 working space was set for Sheetfed glossy publications and if I wanted to set a picture to the correct profile for newsprint I just had to open the picture and hit the action that applied the ISOnewspaper26v4 profile.
    Regarding Quark – I set up separate templates for each type of job:
    One for Profile - ISO Coated V2 (Fogra 39) and one for - Profile - ISOnewspaper26v4.
    Regarding Illustrator - I found that Quark 7 didn’t differentiate between Illustrator colour profiles, or if it did, it didn’t show up in ‘Usage’.
    If I went to Quark Usage and went to ‘Profiles’ it only listed the Quark profile and any Photoshop profiles, not any Illustrator profiles.
    So in Illustrator I just set colour profiles to ‘do not colour manage this document’. So that I only had to worry about changing profiles for Photoshop jpegs / eps’s.
    So I had a good little system going that served me well and now my company decided to move us to PC’s and CS5; and I still have the same problem – juggling newsprint jobs and glossy magazine jobs and not wanting to have to synchronise my CS suite colour settings every time I switch between jobs...
    So I was hoping to stick with my little system on PC / CS5.
    So basically my question is, do I need to worry about Illustrator colour profiles if I am bringing Illustrator files into InDesign? (To clarify, my Illustrator files are always pure vector, so there is no chance of some rogue RGB jpeg sneaking through on a Illustrator file)
    Im open to suggestions regarding my set up, but really would prefer not to have to keep switching my colour profiles.
    Any help would be greatly appreciated.

    First, I wasn't suggesting that your PDFs be exported to RGB, but it is a common workflow these days to keep photos in RGB until you convert them to the correct profile during the export process. This maximizes the potential for re-purposing your documents and allows you to use the same RGB photos for different output purposes without having to do separate CMYK conversions for each destination, so long as you don't need to do any tweaking after the conversion.
    And to answer your question, if the .ai files have no embedded color profile they will ALWAYS be considered to use whatever the CMYK working space is in your ID file, so the numbers will be preserved. This means that there will be slight differences in color on output on different devices (the whole point of color management, after all, is to preserve the appearance of colors by altering the numbers for the output device).
    Does the vector work you get from Thinstock come with an embedded profile? Is there any color that is critical for matching, such as a corporate color (which should be spot, but that's a different discussion), or do you use the same art in both the newspaper and magazine, and does the client expect a match (which we know isn't going to happen anyway)?
    If there's no embedded profile when you start, there's no way to know what the color was supposed to look like, so color management is not possible, really. You can assign a profile, but you'd be guessing. Since the correct appearance at that point is unknown continuing with out color management shouldn't present a problem. The only case where you would need to manage the vector art would be if the color APPEARANCE is critical or you need it to match across different outputs, and in that case you would need to assign a profile and allow ID to preserve the profile on import and remap the numbers, which means you would likely get rich blacks someplace. Since it's unlikely that you can get a good match going from glossy to newsprint, I probably wouldn't even try -- you wouldn't want, for example, to tag the art as newsprint, and have it print subdued on the gloss if it would look better or more correct with the other profile. Color management would be much more useful if you were going from sheetfed to web on the same stock.

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • Partner profiles for EDI

    What is the "Partner Profiles for Logical Systems" when maintaining partner profiles for EDI.
    Which kind of partner profile we use when sending payments like wire and ach through bank. Don't we use partner type B for bank or do we use partner tupe LS (logical systesm)?????

    Hi
    LS - Logical system is used for ALE interface , That is interaction with SAP clicnets whether in the Same Server or External servers.
    Main usage is in Intercompany billing where the Different copmnay codes are maintained in different clients
    Each clicent in SAP has a Logical system Defined to it.
    Thanks & Regards
    Kishore

  • Usage Profile Access

    I have special Usage Profiles UP_1 and UP_2 where choosen diferent SWCV. And I what that User_1 may choose only profile UP_1 and user_2 may choose only UP_2.
    That users can develop objects only in SWCV of own usage profile.
    But I found that if I give to users role SAP_XI_CONTENT_ORGANIZER_J2EE they can choose ANY usage profile.
    How to protect access user_1 objects in SWCV of user_2?

    Hi Anton,
    Users with the following roles are available for configuring the scenarios:
    1. Administrator
    (Include the roles SAP_XI_ADMINISTRATOR_J2EE and SAP_XI_CONTENT_ORGANIZER_J2EE)
    2.Developer
    (Exclude the roles SAP_XI_ADMINISTRATOR_J2EE and SAP_XI_CONTENT_ORGANIZER_J2EE and should only have developer rights)
    Please refer the below doc it will help you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a3efb4-57a1-2d10-a6b9-fed6d21799f8?quicklink=index&overridelayout=true
    There are multiple users in a project who access the ESR. These users come under the following categories:
    1. Administrator (has access to all objects in ESR)
    2. Developers (has to be restricted from using some ESR objects)
    3. Display Users (has only display authorization for certain ESR objects and not edit permissions)
    The users will be restricted also based on Software Components i.e. the users will have access only to the software components of the current project.
    For this scenario, custom Usage Profiles are created in ESR for each of the above mentioned categories. Users logging into ESR can select any of these profiles according to their requirement.
    Also see this link.
    http://help.sap.com/saphelp_nw73/helpdata/en/45/951838644f4b12822900e1b127166d/content.htm

  • MEASUREMENTS IN ACTIVITY USAGE PROFILE

    Please see enclosed link 'printscreen', how is it possible to see, in the Activity Usage Profile, the measurements (hours or manpower,etc.) in the chart blocks,
    specific per month?
    And P6 does not show the actual hours + curve (actual progress till January 2011)
    Thanks in advance for your response, regards,
    WP
    Edited by: WP Hertel on 18-jan-2011 12:09
    Edited by: WP Hertel on 31-jan-2011 15:27

    Modify your timescale to Month.
    1. Right-click on the graph and select the Activity Usage Profile Options.
    2. Click on the Graph Tab
    3. Select the checkbox 'Calculate Average'
    4. Select the 'hours' per month by typing them in (this won't work in P6 7.0 with no service pack). 173 hours is the default and this will convert the Axis to 'bodies'.
    If you want to see exact numbers, double-click in the graph and a popup window will appear.
    Regards,
    Steve Clements

  • Automatic Selection of  "User Status Profile" for Inspection lot

    Hi all,
    I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
    Thanks
    Veeresh

    You can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
    You can use 04pppp where pppp = your plant ID.  So 041000, 042000, 042010, 043000, 043140, etc...
    In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
    FF

  • Status Profile for the supply relationship Vendor

    Hi Experts,
    We have a requirement to maintain status profile for the supply relationship. we try here to just copy from standard but we don;t get through. since we are not able to assigned here Business transaction as well as when we assign this profile to the inspection type 01, system gives wanrning message that "Status profile QM_P_00X is not allowed for "Insp. lot with plan and char."
    Pl help me  to resolve this issue
    MV

    We have defined Status Profile QM_L_00X that is copy of  SAP defined status profile QM_L_003. we have maintained two status RRNR and QINF. In RRNR Maintained business transaction make usage decision :-disalowed (X) and set action (X) and result recording:- allowed(x)
    In QINF maintained business transaction close insp complete:-allowed(x) set(x) complete inspection short term :-allowed(x) set(x) and start inv post bef Usage decision:-disallowed(x) no action (x)
    this status profile is assigned to inspection type, inspection plan has been created , and mic is assigned which has indicator set required char, single value, print, LSL, Sampling Procedure.
    My Problem is when record inspection result and closed it.and go to for usage decision system doen not allow me to do UD ,
    mv

  • System resource usage profile

    Our Forte OLTP application runs on HP-UX 10.20. A transaction uses
    resources through the Forte partition and the Oracle database.
    Is there a way to apportion CPU time, Memory, IO bytes, etc to a
    single transaction? Ideally we would indicate the start and the end of a
    transaction and then collect resource usage statistics. As a Forte
    partition is a UNIX process which accumulates the CPU times of all
    transactions processed I see no easy way to break down the CPU usage per
    transaction. We need to do capacity planning and assigning system
    resources to transactions is imperative in order to know when the server
    will become saturated. Any ideas?
    Thanks
    Jose Suriol
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi,
    What version of project management is the client using? Please take a look at prim55774in our knowledgebase for further information on a possibly cause for why the resource usage profile is blank.
    If this is not the case please contact support for further assistance at:
    http://primavera.com/customer/support.asp.
    Saryn

  • What is the usage of for all entries ?

    What is the Usage of read table  after using for all entries ?
    In the following example what exactly it is doing ?
      Usage of 'for all entries' in Select Statement
    FORM data_retrieval.
      DATA: ld_color(1) TYPE c.
      DATA: BEGIN OF T_VBAP OCCURS 0,
            VBELN  LIKE VBAP-VBELN,
            MATNR  LIKE VBAP-MATNR,
            POSNR  LIKE VBAP-POSNR,
            END OF T_VBAP.
      DATA: BEGIN OF T_VBFA OCCURS 0,
            VBELV  LIKE VBFA-VBELV,
            VBELN  LIKE VBFA-VBELN,
            VBTYP_N  LIKE VBFA-VBTYP_N,
            END OF T_VBFA.
      DATA: BEGIN OF T_VBAK OCCURS 0,
            VBELN  LIKE VBAK-VBELN,
            IHREZ  LIKE VBAK-IHREZ,
            END OF T_VBAK.
      DATA: BEGIN OF T_KNA1 OCCURS 0,
            KUNNR  LIKE KNA1-KUNNR,
            NAME1  LIKE KNA1-NAME1,
            END OF T_KNA1.
       DATA: BEGIN OF T_MAKT OCCURS 0,
            MATNR  LIKE MAKT-MATNR,
            MAKTX  LIKE MAKT-MAKTX,
            END OF T_MAKT.
      SELECT likpvbeln likplifex likpbldat likpwadat likpwadat_ist likpkodat likp~lfart
             likpkunnr likpvstel lipsposnv lipslfimg lipsvrkme lipslgmng lips~meins
             lipswerks lipslgort lipscharg lipsvbelv lipsposnr lipsmatnr
             lipsvbeln LIPSVGBEL LIPSVGPOS vbupkosta vbupwbsta vbupposnr vbup~vbeln
              VBAKIHREZ VBAKVBELN VBAP~VBELN
         INTO CORRESPONDING FIELDS OF TABLE  it_itab
        FROM ( likp
               INNER JOIN lips
               ON  lipsvbeln = likpvbeln
               INNER JOIN vbup
               ON  vbupposnr = lipsposnr
               and VBUPVBELN = LIPSVBELN )
              left outer join VBAK
              on  VBAKVBELN = LIPSVGBEL
              inner join VBAP
              on  VBAPVBELN = VBAKVBELN )
             WHERE likp~vbeln IN so_vbeln
               AND likp~lifex IN so_lifex
               AND likp~lfart IN so_lfart
               AND likp~kunnr IN so_kunnr
               AND likp~vstel IN so_vstel
               AND likp~bldat IN so_bldat
               AND likp~wadat_ist IN so_wadat
               AND vbup~kosta IN so_kosta
               AND vbup~wbsta IN so_wbsta
               AND LIPS~LFIMG NE 0.
      SELECT VBELN IHREZ INTO TABLE T_VBAK
      FROM VBAK
      FOR ALL ENTRIES IN  IT_ITAB
      WHERE VBELN = IT_ITAB-VGBEL.
    APPEND T_VBAK.
    ENDSELECT.
      SELECT VBELN MATNR POSNR INTO TABLE T_VBAP
      FROM VBAP
      FOR ALL ENTRIES IN  IT_ITAB
      WHERE VBELN = IT_ITAB-VGBEL AND
            MATNR = IT_ITAB-MATNR AND
            POSNR = IT_ITAB-VGPOS.
    APPEND T_VBAP.
    ENDSELECT.
      SELECT VBELV VBELN VBTYP_N INTO TABLE T_VBFA
      FROM VBFA
      FOR ALL ENTRIES IN  IT_ITAB
      WHERE VBELV = IT_ITAB-VBELN AND
            VBTYP_N = 'M' .
      SELECT KUNNR NAME1 INTO TABLE T_KNA1
      FROM KNA1
      FOR ALL ENTRIES IN IT_ITAB
      WHERE KUNNR = IT_ITAB-KUNNR.
    APPEND T_KNA1.
    ENDSELECT.
      SELECT MATNR MAKTX INTO TABLE T_MAKT
      FROM MAKT
      FOR ALL ENTRIES IN IT_ITAB
      WHERE MATNR = IT_ITAB-MATNR.
    APPEND T_MAKT.
    ENDSELECT.
    *Populate field with color attributes
      LOOP AT it_itab INTO wa_ITAB.
    Populate color variable with colour properties
    Char 1 = C (This is a color property)
    Char 2 = 3 (Color codes: 1 - 7)
    Char 3 = Intensified on/off ( 1 or 0 )
    Char 4 = Inverse display on/off ( 1 or 0 )
    i.e. wa_ekko-line_color = 'C410'
        REFRESH color.
        colourize 'VBELN' 0. " .
        WA_ITAB-farbe = color[].
        ld_color = ld_color + 1.
    Only 7 colours so need to reset color value
        IF ld_color = 3. "8
          ld_color = 1.
        ENDIF.
        CONCATENATE 'C' ld_color '10' INTO wa_ITAB-line_color.
        WA_ITAB-NAME1 = ''.
        WA_ITAB-MAKTX = ''.
        WA_ITAB-IHREZ = ''.
        WA_ITAB-VBELV = ''.
        READ TABLE T_KNA1 WITH KEY KUNNR = WA_ITAB-KUNNR.
        IF SY-SUBRC = 0.
           WA_ITAB-NAME1 = T_KNA1-NAME1.
        ENDIF.
        READ TABLE T_MAKT WITH KEY MATNR = WA_ITAB-MATNR.
        IF SY-SUBRC = 0.
        WA_ITAB-MAKTX = T_MAKT-MAKTX.
        ENDIF.
        READ TABLE T_VBAK WITH KEY VBELN = WA_ITAB-VGBEL.
        IF SY-SUBRC = 0.
        WA_ITAB-IHREZ = T_VBAK-IHREZ.
        ENDIF.
        READ TABLE T_VBFA WITH KEY VBELV = WA_ITAB-VBELN.
        IF SY-SUBRC = 0.
        WA_ITAB-VBELVA = T_VBFA-VBELN.
        ENDIF.
       READ TABLE T_VBAP WITH KEY VBELN = WA_ITAB-VGBEL
                                  POSNR = WA_ITAB-VGPOS
                                  MATNR = WA_ITAB-MATNR.
       IF SY-SUBRC = 0.
       WA_ITAB-IHREZ = T_VBAK-IHREZ.
       ENDIF.
    wa_ekko-line_color = 'C410'.
        MODIFY it_itab FROM wa_itab.
      ENDLOOP.
    ENDFORM. " data_retrieval

    hi Jyotirmoy,
    The explanation below can give u an idea of wat is going in ur code..
    Use of FOR ALL Entries
    Outer join can be created using this addition to the where clause in a select statement. It speeds up the performance tremendously, but the cons of using this variation are listed below
    Duplicates are automatically removed from the resulting data set. Hence care should be taken that the unique key of the detail line items should be given in the select statement.
    If the table on which the For All Entries IN clause is based is empty, all rows are selected into the destination table. Hence it is advisable to check before-hand that the first table is not empty.
    If the table on which the For All Entries IN clause is based is very large, the performance will go down instead of improving. Hence attempt should be made to keep the table size to a moderate level.
    Not Recommended
                Loop at int_cntry.
                 Select single * from zfligh into int_fligh
                 where cntry = int_cntry-cntry.
                 Append int_fligh.
                Endloop.
    Recommended
                Select * from zfligh appending table int_fligh
                For all entries in int_cntry
                Where cntry = int_cntry-cntry.
    Thankyou,
    Regards.

  • IOS 6.1.4 released for iPhone 5 Adds an Updated Audio Profile for Speakerphone

    Apple has just released an Over the Air update for the iPhone 5.  It seems to only provide an updated audio profile for the speaker phone.  Nothing else listed in the change log.
    I would assume  that there will be an iTunes downloadable  update available shortly.

    It obviously is because you didnt understand. The iphone 4's last update to IOS 6.1.3 in some cases caused the phones speakers to not work (in which this happened to mine and a few people I know) which some people got rid of their phones. HENCE the AUDIO UPDATE that they recently posted but only iPhone 5 can download the update. That is my problem. I have alot of apple products diesel vdub and have had apple for a long time but I can't seem to understand why they would do this and I posted this in hopes to find more people that have had this issue and if they did anything to help fix it this issue. Thank you for your concern though.

  • Can't see the installed icc profiles for my paper in print module

    I have downloaded and installed the icc profiles for my favourite Canson and Crane Museo papers on my new Macbook Pro but they don't show up in the options box in the LR 4 print module. Is there another step I have missed? Thanks in advance.

    Where did you install the profiles? They should go into
    Library/Colorsync/Profiles in your home folder or at the root level of your
    hard disk. If you put it in that folder in your home folder, they show up
    in user, if you put them in the root Library folder, they show up in
    "Computer" in Colorsync utility

  • How do I use the same profile for two users on the same computer

    I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

    Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager

  • How can I launch firefox on different displays simultaneously without creating profiles for each of them

    On my solaris server, there is an application which, in order to display some information, opens the browser. The server can be accessed thorugh X windows by various users. The issue is that whn firefox is open on one display, it fails to open on another display.
    The resolution for this problem as suggested by a lot of users on various forums is to create different profiles for various firefox instances. However, everytime my application will launch firefox, i will have to invoke it with -P option which will pop up the profile manager. I do not wish to show the pop up for creating profiles:(. Is there some way to allow multilple instances of firefox to run on different displays?

    when you lock the preferences with the mozilla.cfg file in the firefox program folder as it's described in the mozillazine kb article above, it should apply for all users...

Maybe you are looking for