Usage = standby....whats problem?

i currently running ios 4.2.1..
and i had a bit problem about the usage and standby meter is exactly the same counters...
and i already off whatever to keep the battery..and it doesn't work..
but when i switch on the airplane mode and remove simcard....
it become normal...
what problem?
+sorry for my bad english+

archideaquaz wrote:
oh ****...
it happen again...
(fully charge with laptop from 20% power level)
but, when i switch to airplane mode or remove my SIM card...the usage counter stop running...
i guess, it have any problem with the simcard or the carrier...
any helpful suggestion please?
The carrier has nothing to do with the phone. It could be the SIM card going bad or the battery. Try using a friend's SIM card to see if it causes the same issue. If it does not happen on the other SIM, then your SIM is causing the problem. Go to your carrier and request for a new SIM card. And be sure to ask them to import your account to the new SIM card.
As for the battery, you might wanna go to a Apple store and go to the Genius bar to get it checked.

Similar Messages

FCP 7 and FCP-X on same partition: what problems are caused?

I'm trying to figure out if the performance issues I'm having with FCP-X can be remedied, or if the problem is just buggy software. Apparently, even a newer, faster, more powerful Mac is not the answer, as I read complaints from people with new, suped-up Mac Pros who say the software slows to a crawl. Sounds familiar to me, but I'm on iMacs and a MacBook Pro -- all my Macs are 3-4 years old, and are from that Core 2 Duo era, not Quad Core processors. All my Macs are maxed out at 4 GB or RAM. So I'm certain new machines are in my future. But judging from what some people say about their newer, faster machines, I'm not entirely convinced that it would solve the problem I'm having with FCP-X.
There are numerous threads here reporting sluggish performance (perpetual spinning beach balls) relating to a memory leak or a problem relating to FCP-X's usage of memory (some say it happens worse in Lion). Is that the problem? And if it is, why hasn't Apple addressed it?
Then there is this matter of having FCP-7 (FCP Studio) and FCP-X installed on the same partition. Apple's "Best Practices" article clearly states that it's best to have the two applications installed on separate partitions. Only problem (for me) is, I already had FCP-7 installed on the primary partition. When I purchased FCP-X (the day it first became available), I hadn't read that article, so naturally, the software got installed...you guessed it...on the primary partition. And yes, I could uninstall FCP-7 (FCP Studio), create a new partition, and then re-install it. But I remember how long it took to install FCP Studio (about 4 hours, as I recall), so I've put off the ordeal of heading down that road.
So I'm wondering.......
What problems are known to occur as a result of having FCP-7 and FCP-X installed on the same partition? Would my sluggish performance be related to this? Or would going to the trouble of uninstalling FCP-7, re-partitioning, then re-installing FCP-7 (FCP Studio) into its own play space, only be a waste of time?
What evidence is there that this co-install is the culprit causing sluggish performance?
What ARE the problems that the co-install causes? I've never heard anyone address this specifically.

When FCP X first came out, Apple recommended keeping FCS 3 on a separate partition, so I did that.
Recently I did a clean reinstall or Lion and installed FCS 3 as normal, followed by FCP X 10.0.3.
During the FCP X install, FCP 7 was moved to a new folder called Final Cut Studio.
'Studio' and FCP X now work happily on the same partition - but I have not tried opening both at the same time!
Just now, both applications are the most stable they have ever been.
These are my standard tips for improving performance:
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
Create Optimised media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot.
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Contrary to what Ian said above, the biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

My 160g iPod classic was originally formatted to PC and I have now moved across to Mac. What problems will I encounter syncing my iPod with my iTunes on my Mac?

My 160g iPod classic was originally formatted to PC and I have now moved across to Mac. What problems will I encounter syncing my iPod with my iTunes on my Mac?

If it's formatted for usage with PCs, syncing it from a Mac may be slow, it can't store files which are 4GB or larger, and its firmware can't be updated from a Mac without restoring it.
(98362)

Time since last full charge - Usage & Standby Keeps Resetting

When I normally charge my iPhone 3GS to roughly into the 90s (percentage), the Usage & Standby times under "Time since last full charge" both reset. I do not go to 100% charge. I only do that like once every few weeks.
I know that these times were buggy sometimes in 2.X versions of the OS where the times would read "--". Usually discharging the battery completely & recharging would fix that, although temporarily...
Anyone else?

Apple does not make your phone battery go to 100% each time you charge. In every laptop or cell phone battery there is a finite amount of times that you can charge your phone up to 100%. After a certain amount of times the battery will die. So Apple charges up to 90% (or something like this) so you won't have to worry about a battery replacement. According to a post I read on engadget.com a normal iPhone user would have to worry about charging their iPhone battery once every 5 years with the way Apple charges your iPhone.
So - it's a good thing. It's not a problem. It's a feature!

When do usage/standby hours get erased?

Do usage/standby stats get erased anytime you reset the iphone (holding sleep and home buttons until apple logo appears)?
Or does it get erased only if an app crashes and automatically reboots the phone? This is what I think happened to me last night.

unfortunayrly a hard reset will erase to usag and standby times - they wont stat accumulating again till the next full charge

Identical usage/standby stats

Hello. The usage and standby times are always identical to one
another. I believe this happened after an update to 4.3.1 but I'm
not sure. I normally drain my battery completely before charging,
allow battery to fully charge before disconnecting. I've also put the
phone in airplane mode and let sit for 10 minutes or so, yet the usage
and standby times are still identical.
I'm using a 16gb iPhone 4 with iOS 4.3.2 and I wondered if any other
users are experiencing this issue. I still get around 1 day 7 hrs of
usage/standby, I'm just kind of curious as to what may be causing
this.
Any help or tips would be appreciated, thanks

That's just exactly what I've noticed with location services, though.
I keep them off unless needed. But as soon as an app asks to use my current location, bang, the usage starts to climb - even with location services turned off.
Strangely enough, it doesn't affect the battery life much, as far as I can tell. But usage climbs constantly until I do a hard reset. Then it behaves itself again.
I posted about this a couple of days ago to see if anyone else had noticed, but there weren't any responses. There had been speculation that it might be push that was causing the constant usage climb, but I didn't buy that. On my phone it's definitely location services.

PS4 and 64 bit Win 7 on a laptop... What problems am I in for?

I'm a noobie to laptops, and I can't live without my Wacom tablet and pen. I'd appreciate knowing how detail drawings are done by PS 4 or other users with this OS and what problems 64 bit will create with this software.
Some laptop questions too: I noticed a response somewhere to use 32 bit in Win 7, and I didn't know you had a choice. True?
Are there some laptops that have both battery and wall plug availability?
Can I still use my tablet and pen via a usb port?
I'm very worried about this software update and I'd appreciate knowing what problems changing from a good PC to a laptop I'll have to deal with. Thanks so much..MM

Photoshop installs both 32-bit and 64-bit versions. On Vista, and I assume Win7, the 64-bit is intalled in the "Program Files" directory, and the 32-bit in the "Program Files (x86)" directory. The two versions look indentical in use, but many legacy plug-ins will not work in the 64-bit version. Be sure to set your desktop shortcuts and file associations to the one you use most often.
Laptops have various battery run time capacities. I used to have a Toshiba that had a big, beautiful 17" screen, but it was large, heavy, ran very warm, and gave me less than one hour on a charge. I replaced it with anAcer Timeline model that gives me over seven hours per charge. It is very lightweight and portable, but the downside is that the thin 13" screen has an extremely narrow angle of view. It does have video and HDMI out, though, so I can use a regular monitor or HDTV, so it's not that big a deal. I really like that I can carry it in a bag without dislocating my shoulder .
I'm using a Wacom Intuous with it with no issues.

HT201317 iphone not my photos are appearing in the photo stream and it's all enabled what problem?

iphone not my photos are appearing in the photo stream and it's all enabled what problem?

Welcome to the Apple community.
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.

I am going to update my iOS from 10.6.8 to Mountain Lion. What problems will I face with third party applications? Alberto

I am going to update my iOS from 10.6.8 to Mountain Lion. What problems will I face with third party applications? Alberto

Are my applications compatible with Mountain Lion?
See App Compatibility Table - RoaringApps.

What problems I might face: Mac Pro and RAID on Lion

I have the following setup:
1 SSD - for OS X (currently OS X Snow Leopard 10.6.8)
3 HDD (RAID 0) - two partitions (Documents and Media)
1 HDD - with 2 partitions 1st SSD backup, 2nd Documents partition backup
(all media files from Media partition are backed up to an external 4 HDDs Raid 5 on Rocstor’s ArcticRoc 4T)
My Documents and Mail folders are soft-linked from SSD to Documents partition on Raid0
Reading different sourced on the web I found that Lion is doing not very good with RAID, at least created on Snow Leopard even if RAID is not used to boot the OS X Lion from).
What problems I might face if I:
upgrade from Snow Leopard to Lion
do clean install of Mac Os X Lion
Has anyone tried the OS X Lion in similar setup?
Any ideas and observations from practical experience are highly appreciated.
Thank you

I have an installer since I have my Macbook pro 17” mid 2010 upgraded to Lion few days ago.
My media files take over 2TB now and therefore I use 3x3TB RAID0 - 6TB for media and 3TB for Documents (Documents, Mail, Music, Downloads)
My mail is taking 2.25GB of disk space, it is not that much and might be moved to SSD especially if it benefits from it even if I do not really care will I get my email message displayed in 0.2 or 0.02 of second.
The most important think I would not like to lose are my media files and I would not like to find me in a situation when after I install Lion I have no access to my media nor on my local RAID or an External one (backup). The performance is very important as well and even if RAID works I would not like to find out that the same RAID HDDs on Lion are performing slower….
I think I will wait few updates of Lion prior to upgrading my MP to it.
P.S. MPG I guess is mac performance guide, and if yes - I know it. But what AYM is? Google returns me different results for AYM… starting from “Awards for Young Musicians” to “Aerobics, Yoga & More”

I have a PowerBook G4 running OSX 10.5.8. What problems am I going to encounter with Cloud?

I have a PowerBook G4 running OSX 10.5.8. What problems am I going to encounter with Cloud?

I think you're out of luck with PPC & 10.5, or in luck by my view of iCloud.
Some features of iCloud require iOS 5 on iPhone 3GS, iPhone 4, iPod touch (3rd and 4th generation), iPad, or iPad 2, or a Mac computer with OS X Lion or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 recommended). Some music features of iCloud are available in beta now in the U.S. only and require iOS 4.3.3 on iPhone 3GS, iPhone 4 (GSM model), iPod touch (3rd and 4th generation), iPad, or iPad 2, or a Mac or PC with iTunes 10.3 or later.
http://www.apple.com/icloud/what-is.html
10.6 people aren't even happy...
https://discussions.apple.com/thread/3102265?start=0&tstart=0

What problems are there when upgrading from Snow Leopard to Snow Lion?

I am thinking of getting a new printer, one which uses Apple's air print. I am using Snow Leopard now. What problems will I see when I upgrade to Snow Lion? I also use Parallels, v. 6. Is it worth the hassle to uopgrade just to use air print?

No, not really. But there isn't that big a hassle.
Upgrade Paths to Lion and/or Mountain Lion
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

What problems to expect when using qmsolb65?

Hi,
What problems can I expect when using qmsolb65.olb with designer 6i and still use qmsevh50, qmslib50 and templates of designer 6.0? Do I need to upgrade the templates as well?
The libraries qmsevh50 and qmslib50 can not be upgraded due to the fact that the customer has added and altered some functionality in these libraries.
Please, I need answers in short term as the project is fixed date.
Best regards,
Pascal

Pascal,
The Headstart 6i Migration Guide, Chapter 5 Incremental Upgrade provides some detailed information on what exactly has changed between version 5.0 and 6.5. I think you might be able to use the qms*50.pll libraries with 6i, but I doubt you will be able to use the templates of Designer 6.0 with qmsolb65.olb.
Cheers,
Rob

HT5622 iPad 3 and my sound has stopped from speakers, but can get from headphones. It's not the side switch and the volume is max in all areas. Anyone got any ideas, what problem is and how to fix it thanks

Hi,
My iPad has just stopped working with sound from the speakers, it works fine with the headphones in. The soft mute button is not made and the volume is at max.
Any ideas what problem is and how to sort. Thanks

System sounds can be muted from the software switch in the task bar as well as from the side switch depending on how you have it set up. This my boilerplate resonse for sound issues.
1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

What problems, if any, has anyone had by changing to iCloud with their iWeb pages?

What problems, if any, has anyone had by changing to iCloud with their iWeb pages?

The iWeb Application will still run after Mobile Me will be turned off; you can export your web pages to a folder on your hard disk and use ftp to upload the pages to another hosting service.
The generated webpages however will refer to icons located on the mobile me server. To make the forward/backward arrows in slide shows work again you will have to patch the iWeb Application. See Old Toad's tutorial on how to do this:
Modify the iWeb Application: http://oldtoadstutorials.net/No.26.html
Also there is a nice tutorial on how to transit from Mobile Me to another service; see Roger Wilmut's page here:
Migrating from Mobile Me:
http://www.wilmut.webspace.virginmedia.com/notes/migrate/frommobileme3.html
Regards
Léonie

Usage = standby....whats problem?

Similar Messages

Maybe you are looking for