Usage type issue with PI upgrade from 7.01 to 7.11

Hi guys,
We are currently performing an upgrade on our PI system.
We are upgrading from PI 7.01 to PI 7.11 and we've come cross an issue during the prepare phase of the install.
An error has occurred during the execution of the CHECK_SUPPORTED_SOURCE_USAGES phase.
This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system.
You can find more information in the log file /usr/sap/PI3/upg/java/log/CHECK_SUPPORTED_SOURCE_USAGES_SSU_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypeCheckSupportedSourceUsages com.sap.sdt.j2ee.tools.check.NegativeResultException This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system. CHECK_SUPPORTED_SOURCE_USAGES INIT PREPARE NetWeaver Upgrade SAPJup Java Upgrade
When reporting problems to SAP Support, attach the trouble ticket file /usr/sap/PI3/upg/java/log/TroubleTicket_01.txt to your message.
We've looked through the main upgrade notes and they mention which usage types are supported, but they do not mention explicity what usage are not supported, and how to proceed with the upgrade if your system does have one of these non-supported usage types.
Considering our system does contain usage type MI, does this mean that we cannot upgrade our current PI system to 7.11?
Please help!
Thanks,
Steph

Hello
Please see note #1247043 Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1 - section "Upgrade: source system must be a dedicated PI system".
It is not possible to upgrade an existing system with the usage type MI. Even if you delete the usage type MI (if this is possible) the upgrade will not be possible.
Regards
Mark

Similar Messages

  • Why am I having performance Issues with an upgrade from CS2 to CS5.5?

    I am struggling hard with an upgrade from InDesign CS2 to CS5.5 (part of CS5.5 Design Standard)
    There is a very slow response when trying to produce a 45 page document which needs many .jpeg images inserting, sometimes up to six on each 3-column page. While InDesign behaves sort of normally on text only pages, it slows to a virtual standstill when on the pages with images. (But this is what its for and I didn't have this problem with CS2!!)
    Having read through some of the postings on this topic I have followed all the advice without success :-( 
    1) disable LSD in Preferences – Interface
    2) disable thumbnail display in Pages
    3) adjust view settings to Typical with Raster and Vector Images greyed out
    4) disable Save Preview Images with Documents
    5) check Links before opening documents
    7) switch Preflight off
    I shouldn't need to do all this should I???
    I am operating with the following:
    Packard Bell ixtreme M5740 64 bit
    Intel Core i5 CPU [email protected]
    4.0 GB RAM
    ATII Radeon HD5570 graphics card 2779 MB available memory, 1024MB dedicated
    plenty of free space – 274GB on c: drive and 296 GB on a D: drive
    My hardware conforms to/exceeds the Indesign recommended hardware spec. Oh yes I am working on my local drive and  I don't have these problems with Photoshop or Illustrator CS5.5.
    Has anyone an idea about what's going on?
    I've lost a good 6-8 hours so far trying to sort it out. Any help and observations will be gratefully received!

    Hi Peter
    Thanks - I've found that the files were marked as 'hidden' and thus by switching them on gain I was able to recreate the original location.  Regrettably this has had absolutely no effect on my problem. :-( 
    I have now created a  fresh document, studiously linking all my images properly  (similar number to a DK 'Eyewitness Travel Guide') and by the time I got halfway through its 80 pages, InDesign had slowed to a crawl - ie 15-20 seconds to respond to any command.  It is clearly doing something that it thinks necessary despite all the 'workarounds' people have suggested. Please please Adobe what's going on???

  • Dv4-1428dx with win7 upgrade from Vista. No internal spkr audio.

    dv4-1428dx with win7 upgrade from Vista. No internal spkr audio.
    Headset audio is OK.
    Speaker icon in system tray shows red "x" (no connection) unless headset is plugged in.
    Device Manager only shows two "High Definition Audio Device(s)", nothing else.
    This question was solved.
    View Solution.

    Hi:
    Try installing the Vista driver from your notebook's support and driver page and see if that fixes the issue.
    Paul

  • I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay.  Works perfectly with my iPod Touch.  The AirPlay icon appears irregularly in iTunes and when selected doesn't connect.  Running latest IOS software.

    I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay.  Works perfectly with my iPod Touch.  The AirPlay icon appears irregularly in iTunes and when selected doesn't connect.  Running latest IOS software.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    You said:
    No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this. 
    That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

  • Issues with RAW files from my 7D

    I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
    Any words of advice, other than just buy Aperture 3??

    I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

  • Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

    Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

    After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.

  • TS1717 are there problems with iTunes upgrading from Vista to Windows 7?

    are ther problems upgrading iTunes from Vista to Windows 7?

    The best method is to use Windows Easy Transfer first to backup all your data, and do custom clean install. And install all your apps and drivers afterwards.
    Yes it should work. Make sure you are ready, and have all the latest drivers and applications ahead of time.
    There are some "gottchas" with the upgrade from Vista.

  • HT5928 I0S 7 draft folder in email exhcange is gone...anyone else have an issue with this "upgrade".  Draft folder is essential for my work as I create on my laptop and need the draft available on my iPad when I travel...UGH!

    I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"?  Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.

    I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"?  Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.

  • Paper Type issue with Adobe Standard X printing from browser

    I work in IT and have two users who suddenly started having a problem printing PDFs from a browser (IE9).  We cannot upgrade the borwser to 10 or 11 because it becomes incompatible with a few of our in house websites.  I uninstalled standard and installed Adobe Reader XI and did not experience the same problem, but they are in need of Standard X in order to do their job.
    What happens is when the PDF opens in the browser and they go to printer, the default for paper type is High Gloss paper instead of plain or unspecified.  This doesn't happen if we open a pdf from the desktop and print and the default for the driver is plain.  Yes, we could save the document and then print it, but they feel that takes more time and I have to find out why this is happening. Any help would be very appreciated.
    Windows 7 32 Bit PC
    Internet Explorer 9

    Probable issue with the Firefox is that in the documentation it is poorly worded poorly,  JIDS only support FF 17.
    What is the issue with IE if that does fix the FF issue?

  • Issues with .mov files from Canon 5d mk3 - since Mavericks upgrade...

    Hello,
    Ever since I upgraded my OS to Mavericks, Premier Pro has been refusing to 'see' .mov files in my projects. In the timeline the bits of .mov footage are appearing as red blocks, in the preview pane you get 'Awaiting media' then the red block of doom.
    So currently I'm having to convert footage from .mov to mp4v - then it seems to be OK. The upgrading to Mavericks could be a coincidence ... but before that I had no issues with PP.
    This is my system:
    Processor  2.8 GHz Intel Core i5
    OS X 10.9.1 (13B42)
    Graphics  ATI Radeon HD 5750 1024 MB
    Memory  12 GB 1333 MHz DDR3
    I would love some help/ideas on this - it's doing my head in having to convert .mov files, and having to back convert stuff in my existing projects ... please help!
    Best - Abbottssnapper
    [Text formatting corrected.  Please type your posts into the browser, as copy/paste often leaves unwanted code.]
    Message was edited by: Jim Simon

    >Ever since I upgraded my OS to Mavericks
    Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    maverick
    or
    mavericks
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • Issue with SAP GUI 7.30 launching with users upgrading from 7.10

    We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
    Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
    I don't know why the program is trying to search for saplogontree.xml.
    I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
    I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

    This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
    Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
    If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
    The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
    Windows Vista and higher, and will only cause further trouble later on in the updates
    See note http://service.sap.com/sap/support/notes/1409494
    Jude

  • Issue with file download from BLOB type data

    i have been using this for a while, with no problems, including on hosted machines.
    the upload to the database works fine.. not the issue, and the download script also works fine, on the local WAMP machine.
    but once moved to the server it fails.. the query does not work.
    i have a feeling that it is something to do with the managed hosting i am using, but they say no, i have tried it on 2 seperate hosted machines (different providers), with no joy.
    if i run the select query on the hoisting server via phpmyadmin, the query runs ok.
    any suggestions as to what may be causing the problem on the server compared to the local WAMP machine?
    i really don't know where to start looking, or where to point the hosting company.
    This is the php code to download the blob data, works fine on local WAMP setup, browser asks if you want to save the file/open etc. as expected.
    <?php require_once('Connections/connTracker.php'); ?>
    <?php
    // if id is set then get the file with the id from database
    if(isset($_GET['docindex']))
               {$id    = $_GET['docindex'];
            $query = "SELECT document_name, document_type, document_size, document_content " .
               "FROM tracker_documents WHERE document_index = ".$id;
    *** seems to be failing here when running the query ***
    $result = mysql_query($query) or die('Error, query failed');
               list($name, $type, $size, $content) = mysql_fetch_array($result);
         header("Cache-Control: maxage=1"); //In seconds
       header("Pragma: public");
         header("Content-length: $size");
               header("Content-type: $type");
               header("Content-Disposition: attachment; filename=$name");
               echo html_entity_decode ($content);}
    exit;
    ?>

    Hi Gun,
    You are the only one responded to my issue. I have allocated some points.
    Yes. I have checked the assignment in CRM organizational model.
    I did download the org. structure from ECC 5.0
    All objects including sales offices are activated for determination and I have verified with green light
    As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
    What is missing during the first time bdoc process? Looks something is missing for validation module?
    Any inputs?
    Thanks,
    Raj

  • Issue with Agent Profile from AM 70 OpenSSO interesting issue

    Hi All,
    I have a specific scenario and if it is not possible then ugrade from AM 7.0 to OpenSSO cant be true.
    I have issue with the agent profiles (BTW I am not doing upgrade from AM 7.0 to OpenSSO but its a fresh OpenSSO install)
    In AM 7.0 Agent profile is like this (below is the exact export from the AM 7.0)
    dn: uid=Test-Agent,ou=agents,o=am
    sunIdentityServerDeviceStatus: Active
    uid: Test-Agent
    objectClass: sunIdentityServerDevice
    objectClass: iplanet-am-user-service
    objectClass: top
    objectClass: iPlanetPreferences
    sunIdentityServerDeviceType: Agent
    cn: default
    sunIdentityServerDeviceVersion: 2.2
    userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
    Below is exact import into the OpenSSO (I created this LDIF using my script)
    dn: ou=Test-Agent,ou=default,ou=OrganizationConfig,ou=1.0,ou=AgentService,ou=services,o=am
    ou: Test-Agent
    sunsmspriority: 0
    sunserviceID: 2.2_Agent
    sunKeyValue: sunIdentityServerDeviceStatus=Active
    sunKeyValue: sunIdentityServerDeviceKeyValue=
    sunKeyValue: description=
    objectClass: sunServiceComponent
    objectClass: top
    sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
    Now you can see the issue in AM 7.0 the password is stored as "userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" where by directory server userpassword is SSHA encrypted VS in opensso it is "sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" which OpenSSO doesnt like .. :)
    If i create a Agent from the opensso Console then Agent create a password using AES encryption and and that works fine even when I import my above LDIF and update the password using the OpenSSO console it also works. The issues I have this I dont know all of the Agent clear text password and I only have the LDIF to work with. Any thought !! Please let me know I am stating to believe that the upgrade from AM 7.0 to OepnSSO will have the same issue which i have not tried yet.
    Anythoughts or ideas are very welcome !
    -Haris

    Configuring the agent like this, ie importing a ldif file is not supported and can lead to unexpected results as you have observed. Just do it in a supported way and change the password for the agent if you don't know it. As the administrator you are supposed to know the password or have the power to reset it.

  • Strange issue with RAM upgrade: It works but it doesn't! Please help.

    Hello Everyone,
    I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
    Many thanks in advance.

    I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
    In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
    Thanks again. Very much appreciated.

  • Issues during technical upgrade from  version 4.6C to ECC 6.0

    Dear All,
    We have done a technical upgrade from version 4.6C to ECC 6.0 and encountered following issues -
    In the t-code ABZE (acquisition with in house production) there is a check-box for reversal posting on screen with version 4.6C. However, this field is missing in ECC 6.0. Why so?
    In the report s_alr_87012327, there is a field "only with creation block" in version 4.6C. However, this field is missing in ECC 6.0. Why so?
    Request to kindly suggest the alternative to carry out the same in ECC 6.0.
    Thanks in advance.
    Regards,
    Dhawal

    Hi Akshya,
    Please find answers below.
    1) 4.6c is NON-UNICODE system, Can I upgrade it into ECC 6.0 UNICODE system?
    Yes you can.
    If you are on a single code page system then you can give a gap between your uprade and unicode conversion. There is no problem with the singlecode upgrade and conversion.
    But if your system is MDMP then you will have to do the CUUC method that is both upgrade and unicode conversion together. Though you can give a gap and sign an disclaimer with SAP it is still not recomended way.
    2) 4.6c does not have any ITS system installed. If we upgrade it to ECC6.0 ABAP only, then Can I activate WAS internal ITS?
    Yes you can activate it.
    3) 4.6c does not have any JAVA stack. When I upgrade it to ECC 6.0, can I upgrade it to dual stack (ABAP+JAVA)? If yes, then how?
    After the upgrade and unicode conversion you can install the java stack.
    Regards,
    Ravi.

Maybe you are looking for