Usage value not getting calculated for equipment PRTs in production order

Dear PP Gurus,
I have assigned a PRT equipment to pouring production routing.
I have assigned the followings:
          1. control key as "1" in the operation.
          2. usage value as 1 ea in standard value in the operation
          3. Formula maintained in the operation as ZAPF02= SAP_09 * SAP_16
                          SAP_09 (Operation quantity) -> general operation value , field name- MGVRG
                          SAP_16(PRT std value) --> Value from PRT allocation , field name- EWVGW
The production order is calculating the planned consumption of PRT usage, but when I confirm the operation, it is not calculating the actual usage usage value. Actual usage value should be number of moulds confirmed in the molding operation confirmation.
Kindly help me urgently.
Regards
Amar

Hi,
I got the issue.
In IE02- equipment measuring point change, we need to assign the same in the PRT screen also.
But now a new error coming-
Document 3 already entered for the measurement time specified
Message no. IR027
Diagnosis
You are trying to enter a measurement document for a measuring point that has been defined as a counter.
However, a measurement document that has not been reversed already exists at the measurement time you have entered.
The system must be able to determine a unique sequence for the measurement documents to be able to recalculate the counter readings if necessary.
System Response
The system will not allow the existence of two measurement documents for a measuring point where the measurement times are the same to the exact second. The system must be able to order the measurement documents in a sequence if it has to to recalculate the counter readings.
Procedure
Check your entry.

Similar Messages

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

TAX condition value not getting calculated

Hi Gurus,
At my client we are having this strange issue in pricing when invoice creation. We've set up copy control rules as copy all unchanged. When I tried creating invoice, all the elements are getting copied, but the tax value is not getting created. We've delivery to invoice copy control rules, so that we can copy freight and price source is E (delivery/sales order). e.g.
In sales order we have following elements with values:
Price $1000
discount 10% value will be 100
tax5% value will be $45. Total value becomes $ 945
In invoice, it should copy all the elements unchanged, but we are getting following values:
Price $1000
discount 10% value will be 100
tax5% instead of showing value $45, system doesn't show anything. Total value becomes $900.
I checked all the config, including pricing and all the copy control rules. I'm not sure what I'm missing.
Please provide some inputs!!
Thanks,
Ketan

First check the root cause of miss ing TAX condition type in biling through Pricing Analysis.
To do that Billing Doc - Item - Conditions tab - click Analysis Button
Then select the missing TAX condition type for knowing the error.
Also, check the service render date in billing doc.
You can find this Biling doc - Item - Item Detail Tab - Price data
Take note of the date for Serv.rendered
And in the condition record (VK12 / VK13) for Tax condition type.
Check the validity date of condition type.
The date for service render sholud lie in the validity date maintain in condition record.
Regards
JP

Price Variance does not get calculated for Direct shipment orders

Hi,
During a Direct Shipment when the GRN is entered it Debits the Cost of sales and credits the GR/IR Account which is correct but my problem is when there is price difference in PO and material the difference instead of going to a Variance account it debits the entire value to cost of Sales.
But the Cost in Material Master flows PA. This is causing a difference between PA and FI.
Could some help to solve the above
Thanks in Advance
Roville

HI
SET TOLERANCE LIMITS FOR PURCHASE REQUISITION UNDER THE DEFINE DOCUMENTS FOR PR
AFTER SETTING TOLERANCE LIMITS WHILE CREATING PURCHASE U WILL GET BASED ON TOLERANCE LIMITS THERE FOUR WAYS TO SET TOLERANCE LITS
1
ABSOLUTE VALUE
2
PERCANTAGE
3
TOTAL PO VALUE
4
QUANITY BASED PRICE PER UNIT
OK BYE

Value not getting resetted for Node inside Node

Hi All
I have created the node structure as below
A (Value Node)
|_ID (value attribute)
|_B (Value Node)
    |__Val (Value Attribute for Node B)
Now the code is as follows
for(i = 0 ; i < n ; i++ ){
Ele Aele = createElement
Aele.setID("1")
nodeA.addElement(Aele)
for(j = 0 ; j < n ; j++ ){
    Ele Bele = createElement
     Bele.setVal("Val1")
     nodeB.addElement(Bele)
Now i want for ID - 1 , Val - a,b,c
when sec time loop iterates
ID - 2 , Val - d,e,f
But the problem is that
For ID - 1 , i am getting Val - a,b,c,d,e,f
when sec time loop iterates
ID - 2 , Val - a,b,c,d,e,f
I hope you all can get what my problem is..
Kindly comment and help me out
Regards
Sonal Mangla
Message was edited by:
        Sonal Mangla

Hi ,
There are a lot similar posts in forum.
You can also search help.sap.
Try this link. They have explained creation of similar context structure.
http://help.sap.com/saphelp_nw04/helpdata/en/13/4cde139306304480e89d815ffcf891/frameset.htm
Regards
Bharathwaj

Shipping cost not getting calculated in CRM IC webclient for a certain regi

HI all,
I have an issue where when we create an order, the shipping cost is not getting calculated automatically.. and so we are having to manually enter the shipping cost..this is happening only for Apac regions. for all other regions it seems to be working. but the shipping cost is getting calculated in R/3. can anyone provide input for this?
Also, what factors determine the shipping cost?
Thanks,
Preethy

This is a funtional issue... You'll be better of opening this message in the right Area.... or open an OSS message for SAP.
Regards
Juan

Shipping cost not getting calculated in CRM IC webclient for a region

HI all,
I have an issue where when we create an order, the shipping cost is not getting calculated automatically.. and so we are having to manually enter the shipping cost..this is happening only for Apac regions. for all other regions it seems to be working. but the shipping cost is getting calculated in R/3. can anyone provide input for this?
Also, what factors determine the shipping cost?
Thank you,
Preethy

what price conditions determine your cost in R/3?
might be easier to use the CRM gui and create the order in crmd_order and look at the conditions. Unless you set it up there is no plant in CRM (just vendor) so if your cost is tied to your plant, I'm not sure how you would get this without a possible rfc call to R/3.

Value property not getting updated for edit on firefox

Der Sir/Mam,
I am a selenium tester and my test fails on moxila due to following issue,
Value property not getting updated for edit on firefox thats why failing the script while identifying the object from xPath.
The test case run fine on IE.
I want to identify the object by its xPath saying value = "Some value"
I can not check thousands of object by looking in to its value attribute property.
Thanks in advance,
Rohit

I'm not sure whether we can solve your question here. We are mostly supporting the released version of Firefox (Firefox 20) for regular use rather than old versions in a test harness. You might need to reach out to the [https://groups.google.com/forum/?fromgroups#!forum/selenium-users Selenium Users Group] if you can't replicate the problem in Firefox 20.

Non financial numbers do not get calculated

Hi all,
after an upgrade of our BPC version 7.0 from SP5 to SP10 we have the problem across all applications that non financial numbers, which have no rate type applied, do not get calculated from local currency into reporting currency. No changes were applied to dimensions, logic, business rules, etc.
Thank you for any ideas and help.
Best regards,
Melanie

Hi Melanie,
if you are using the conversion via Business Rules and you just want to copy the non financial values from LC to other currencies, you need to specify a new rate type (for ex. "NonFin"). In the currency conversion rules you define a new rule for "NonFin" with the formula .
There was a change in the Currency Conversion engine..we had a similar problem.
Regards
Jörg

Breakdown Duration not get calculated??

Dear All Experts,
                I am using a customer exit QQMA0014 for making breakdown tick (Malfunction is breakdown) depend on notification coding while saving notification.
               My problem is even if I am making breakdown tick at the time of saving notification the breakdown duration is not get calculated even if i m doing entries of Malfunction Start and Malfunction End Date.
               Please can anyone give me solution for this, fuctional module name which calculate the breakdown duration.
               Even if we hv written the code to calculate the duration we r also passing the value but not getting populated in the table.
        Waiting for the help from masters.
With best regards,
Narendra

Withdrew my answer.
Edited by: Seran Kannan on Apr 13, 2009 6:48 PM

Total Demand not getting calculated in Plg book 9ASNP94 -DATA VEW SNP94(1)

1. I am using the std planning book      9ASNP94 AND DATA VEW SNP94(1)/
2. i have maintained all the below master data
     1. Location.
     2. Product.
     3. PPm
     4. IM for planned order
     5. IM for sales order
3. Now i have sent sales order as demnand for the Planning book
4. Sales order is getting displayed in the sales order row.
5. The macro for toltal demand is working fine in the macro test,
Issue
1. Total demand is not getting calculated, eventhough i have sales order qty of 1000 it is showing nothing in the total demand.
2. since total demand is zero my stock on hand is also zero.
3. I need to run location heuristic to genearate SNP planned order.
kindly let me know how to address this issue !
reg
dsk
Edited by: Dhandapani Satheeshkumar on Dec 10, 2009 5:17 PM

Hi ,
can you plz go to the standard planning books - data views macro book .
i.e open the macro workbench and then go to the macro workbook for SNP94(1) data view.
open the macro book
See in the default macro list that all three default macros( shown in the top right hand side ) are added and also all macros in the macro book are either green or yellow. if they are red then generate them again .
if three default macros are not in the defalut list then include them ..save and exit .
Now check in the planning book if it works ?
if not let me know ? which version r u working on ? is this the first time you are seeing data in the planning book?
Thanks
Debsankar Das

VALUES NOT GETTING ADDED IN JAVA DICTIONARY

HIII ,
AM DOING AN APPLICATION IN WHICH I AM TRYING TO INSERT VALUES IN A TABLE(CREATED THRU JAVA DICTIONARY), USING EJBS(ENTITY BEAN AND SESSION BEAN) AND COMMAND BEAN..AND WEBDYNPRO....
    AFTER DEPLOYMENT EVRYTHNG IS RUNNING FINE BUT VALUES NOT GETTING ADDED IN THE TABLE...
THE CODE FOR THE "ADD" BUTTON IS :
wdContext.currentEmp_cmdElement().modelObject().add(wdContext.currentEmp_cmdElement().getEmpno(),wdContext.currentEmp_cmdElement().getEmpname());
THE CODE FOR ADD function IN COMMANDBEAN IS
public void add(String empno,String empname){
          try {
                 local.createdata(empno,empname);
               } catch (Exception e) {
                    e.printStackTrace();}
PLZZ DO HELP OUT!!!

The message in simple English just means that "You are doing something really bad" !!! It is absolutely not the communication problem, but understanding problem.
Though you may be executing the same function using SE37 or in the webshop application through JCo, the runtime context is different and without knowing what exactly your Z rfc is doing, it is very difficult to help. To start with, the userid - that is who is running the RFC is different in both situations. In SE37, it is the logon user and in the web, depending upon whether the connection is stateless or stateful, it could be the anonymous ICSS user or the logged in user. Here again, if you have used UME, it is the user id and if you have used ALIAS user, then it is the alias user id. This is just an example. Your runtime context can be different due to many other reasons too.
So, to make this simpler - what is that you are trying to do?
BTW, try not to create multiple threads for the same issue..

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Not getting data for 1 field in ODS

Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.

Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
   Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
   Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
   No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva.

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Usage value not getting calculated for equipment PRTs in production order

Similar Messages

Maybe you are looking for