Usaing deliver to send a message to a user

hi, I'm using Messaging Server 5.2 p2 and I'm trying to send a message to a user using the deliver command. I succeed in sending the message but everything else is blank, the from part, the name of the sender. Is there any way to send a message using deliver with more information about the sender??

I would caution you not to depend on using "deliver" as a replacement for the ims-ms channel. "deliver" was designed to be a lightweight method of occasionally dropping a few messages into the store.
One ISP had some major problems attempting to use deliver instead of the normal store delivery channel. Running many copies at one time, and crashing the store system. It didn't used to be safe to run more than one deliver at a time. I don't believe this has changed.

Similar Messages

Remote Desktop Services Error when trying to send a message to a user in the collections

We are implementing RD for thin clients and when I try to send a message to a user I get an error that states,: Unable to send a message to session X on (SERVER NAME.COM). WTS API Failed
Is there a service that needs to be turned on?
Thanks EPK

Hi,
Thank you for posting in Windows Server Forum.
Before sending message please check following considerations.
- You must have Message special access permission to send a message to a user.
- You can send messages only to users whose sessions are in the active or connected state.
- You can send a message to a user session in Remote Desktop Services Manager by using the Send Message action.
Send a Message to a User
http://technet.microsoft.com/en-us/library/cc754124.aspx
Else you can also try below script and check the result.
Send-NetMessage - Net Send / Msg.exe
http://gallery.technet.microsoft.com/scriptcenter/Send-NetMessage-Net-Send-0459d235
Hope it helps!
Thanks.
Dharmesh Solanki

How to send a message to a users Business Workplace? (which FM)

Hi guys!
How can i send a message to a users Business Workplace inbox?
Can you help me out with a FM or where i find information to this topic.
thanks!

See https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/sendingEmailsandSAPMail
In the receiverlist you can set the type of user (external mail, internal mail by SAP userid is B i believe)
regards,
Hans

Would like to send 'admin' message to all user of a forms application...?

Hello,
We are in 10g, and I have a specific issue I would like to talk with you...
I hope I will be clear... and that my termonology is not too bad !
In unix, it's possible for an administrator to send a message to all Unix sessions..
So, do you think it would be possible to do a similar functionality on a Forms application?.... so that an admin user could send a message to any user connected to the same form application...
Thanks a lot for your contribution,
Olivier

That functionality is part of the operating system in Unix. I don't think Forms provides for anything like that, unless you set up a timer in each form and check a database value every minute or so. The network might provided for something like that but you would have to check with the network guru's about that.
NumbNutz

Exchange 2007 - The server don't send dsn message for external users

Hello,
Our exchange 2007doesn't send dsn message for external users but for internals it is ok, I check my configuration but all seems to be ok
Have you any idea please?
Thx

Hi,
To narrow down the cause, let's firstly try to check the following configuration:
Get-TransportConfig |fl
Get-RemoteDomain | select identity, NDREnabled
Get-SystemMessage
Thanks,
Angela Shi
TechNet Community Support

Send the Message to all User

Which is the function module through which we can send the message to all User
ASAP
Sandeep Jadhav

Hi,
Use the function module
TH_POPUP
Refer this link
how I send Instant system message to All online terminals
Regards

Can I send a message to multiple users at once?

My company has an internal Jabber/XMPP server that we use to communicate as a group. Up until recently, I've been using a Jabber client called Psi (http://psi-im.org/) to connect to our Jabber server and do messaging. However, I recently decided to give Messages a try, since it includes support for the Jabber protocol. It is working great, except for one feature that I can't seem to find. With Psi, I was able to right-click on the heading of a buddy group and choose to send a message to all of the members. With Messages in Yosemite, I get an option to "Send instant message to members," but all that does is pull up my messages window with a random contact from the group selected. I also don't want to start a group chat, I just want to send a broadcast message to the group. Maybe this is just a distinction that Messages doesn't make, but with Psi there was a distinct difference between a message (just a single message, in its own window, sent from one person to one or more other people) and a chat (an ongoing conversation with one or more people, all in the same window).
Right now when I want to send one of these messages, I quit the Messages app, start Psi, send the broadcast message, quit Psi, and start Messages back up again. I'd like to be able to just use Messages.
Any thoughts?

Hi,
The Yahoo add-on bits in Messages are not worth the code they are written on.
When it was muted to be coming (pre iChat 6) we thought it would be added the same way and Jabber was in iChat 3 (later amended to allow the Google Name issue to be circumvented by having A Google Entry) including Group Chats, Direct IM, Video Chats and Audio Chat if only to other iChat/Messages users.
However this is not the case and it only does 1-1 text chats and can only use actual Yahoo IDs
8:19 pm Wednesday; April 22, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

When I send a message it says "user not registered"??

When I send a message on new ipad mini, it says "user not registered"??

Oh, sorry I didn't understand what you meant.
There are some third party apps that let you send text messages from the iPad - to any phone - Android or iPhone.
Some come with a fee or a monthly fee to send the messages. I don't know that much about the, but you can search the App Store or use a Google search.
Here is one example above.

Can I send notification message to other users?

Hi all,
Can abap webdynpro send out notification messages to other users in a portal? If a new user select some employees that have overwritten other same users selection, I need to send out notification message to other users that their selection have been resetted by this particular user. Can this be done in abap webdynpro?

In NetWeaver 7.0 Enhancement Package 2 there is a new feature called Web Dynpro Notification Service. It lets you send events to any other applications which are listending for that same event id. In a demo that comes with 7.02 we use this technology to create a chat application. However this functionality has to be built into each application. They must have an event handler ready to respond to the event.
So you could build what you describe into your application - but only as of 7.02. 7.02 for the Business Suite comes with BS7i2010 which is currently scheduled to start ramp-up in Q4.

Send system message to specific users

Hi,
We have a requirement to send a system message to specific users that will be displayed immediately to those in the list who are logged on, or for those not currently logged on, the message should be displayed when they next log-in.
We do not want the message to go to their in-box or to be sent by email. We are looking for something similar to the system message produced by SM02.
Does anyone have any ideas or examples?
Thanks
Jan

Hi Mylene,
We have looked at TH_POPUP.
This works fine if the user is logged in but not if they are not. We need something that will pop up when they do log in.
Thanks for your help tho
Jan

I want to send a message to iPhone user but as sms not imessage

My daughter uses iPhone as do I. She has her data turned off most of the time and uses wifi. If she is on a solid wifi network she gets iMessage. If she is not she doesn't.
I used to be able to send to her phone number as a text message...old school but not now.
The option to "send as text message" doesn't come up anymore.
Any help would be appreciated!

Coppad wrote:
That makes sense....I used to be able to tap the outgoing message and "send as text message" but that no longer seems to come up as an option. Only copy and more show up.
It tends to connect faster, and you only get the choice to do that if the message fails, or you are quicker on the tap then the sending is. I'll assume there is a reason that she has data turned off, but for iMessaging it uses very little data. You are going to have to decide how you want to deal with this, based on what other messaging she does.

How can i send a message to specific user?

I know I need to use ptp messaging when sending a personal message to a particular person.
How can I specify so that the person with name mike is going to receive?

Put in your message header in the form of name/value pairs, the knowledge you want to use to control the consumer flow of your messages. For example (personName, Mike). Then setup a selector on the consumer side with personName = 'Mike' (see the JMS spec for this, or your product dev guide). This will allow the consumer Mike to get the message.
Now will that prevent anyone else from reading the message? No. Anyone that would not filter on the personName could consume the message. Another way of doing it (in a more complex fashion) would be for Mike to create a temporary queue, and to send the queue name to the producer in a message on a management queue define by you. This way, only the element knowing about the queue name will be able to use the queue, hence, the producer targeted by Mike, and himself. If you need to get to that extent, then you probably also want to setup the security, so that only authorized consumers and producers can connect to your queueing system.
This forces you to allow temporary queue creation, which is sometime seen as a security risk.
HTH
TE

Can't send short message to internal users from SO00

Hi
we're trying to send message from transaction SO00 using sap logon name. After sent it, I go to tx SOST and saw nothing in send requests; but if I use an internet address from SO00 this do appear on SOST and I can send it.
Can you help me?
Best regards

Hi,
I dont think it is possible. This is the Reply for the OSS Message we have raised for the same issue.
I'm afraid that SAPOffice is not that "smart". When you specify an
internet address and enter a SAP user name the system will not check
this entry in address managment. It will assume that you have entered
a valid RFC822 mail address. I can understand why this functionality
would be useful (as in say MS Outlook) but SAPOffice is more than a
mail client.
As the node specific routing and mail domain checks are carried within
SAPConnect (SCOT) the error will not be picked up untill RSCONN01 is
run. This is why no error message is displayed when you enter an invalidemail address in SAPOffice (SBWP).
You have raised an interesting functionality deficit. I will ask
development to consider address checks when sending emails to SAP User
Names.
Award points if helpful
Thanks,
Tanuj

Sending a message to a users email

Hi,
I need a little script that sends a link adress to a users email as soon as he/she presses a submit button.
I have to create a form element for the email (of course) and a PHP-script that somehow attaches/sends the link from a textfield in EA when you press the button, I guess?
How would you do that?
Thanks!

Yes I´ve seen them, but here an email is send to a predefined email adress.
Mine has to be send to the email adress that the user defines.
I can´t figure it out...

Mail Will Not Send a Message Containing a Particular URL

This seems strange to me. I have been trying to send the following URL in the body of a Mail message and Mail keeps telling me it cannot be delivered. I've tried sending the same URL in the body of a message in Yahoo webmail and it will not send either.
http://tornadovideos.decadehost.com/index.cfm/do/s.home
I can send and receive out of both accounts just fine except for trying to send this one particular URL that I have copied and pasted into the body of my e-mail messages. The website deals with storm chasing and has some great tornado footage on it. Interestingly, the name of the website is tornadovideos.net, but is becomes the above when actually visiting the site.
This is most strange to me.
Thanks,
Steve M.

Thanks both of you for replying. This is the message I get from Mail.app immediately after clicking Send. This message appears as a little drop down box that comes down from the top bar of the e-mail containing the link in question. And the intended recipient is me. So I'm trying to send it from myself, to myself all within my Charter cable POP e-mail account.:
"This message could not be delivered and will remain in your Outbox until it can be delivered.
Sending the message content to the server failed."
In the case of my Yahoo webmail account, I get a mail daemon message back to my Yahoo account a few seconds after trying to send an e-mail to my Charter POP account containing the tornado video link. This is a unique behavior with this particular URL, it is repeatable, and it happens with no other URL.
Regards,
Steve M.

Usaing deliver to send a message to a user

Similar Messages

Maybe you are looking for