USB 100m driver for Windows 7

I am running Windows 7 Pro x64 bit, and I was unable to get a driver from Cisco's website that worked. Windows was unable to find the driver as well. As of now, I am unable to use the USB 100M Etherfast Network Adapter. Is there a workaround or a driver download I don't know about, or is the device simply incompatible with Win 7? What if I were to get the driver working on an XP computer, and then transfer the driver over to my Win 7 comp? Could that work?
Solved!
Go to Solution.

The Link above to the Realtek driver (Vista Version) is confirmed to work in Windows 8... entering this post using that connection Yay!!! Love this little thing!

Similar Messages

  • S400 usb 3 driver for Windows 8

    Hi Guys,
     i was wondering if you could point me to a link for USB 3 Driver for the lenovo S400 for Windows 8?
    I can't find it on the download link on the support page. Thank You.

    Hi
    Welcome To Lenovo Community
    USB 3.0 drivers are actually not required for windows 8 as it will be automatically identified
    If you wish you may try the following drivers  Intel USB 3.0 Driver
    Do give this a try and let us know  
    Hope This Helps
    Cheers!!!
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
                            English Community   Deutsche Community   Comunidad en Español

  • USB-485 driver for Windows 7

    Does there exist on the NI website a device-secific Windows 7 driver for the USB-485? I know I can download and install NI-Serial package (all 517 Mb of it) and get the driver for this thing, plus the drivers and libraries and help files tons of other stuff for dozens more devices that I'll never use, but I don't want to do that. I just want the Windows USB driver for this single device. Is it available?

    That may be true but it would effectively eliminate the NI product from contention when someone was just looking for a simple 485 COM interface without any of the other extensive software baggage that the NI part drags in. In this case I guess something like the FTDI part with its 2Mb driver will be a more reasonable choice.  I appreciate NI having hardware that supports their software and vice versa but I would think they'd also want their hardware to be usable (where conveniently possible) in generic software environments as well, just so they were not walking away from that market segment.

  • Creating Recovery Media using USB Flash Drive for Windows 8.1

    I followed all the instructions to create a USB Flash Drive Recovery Media (insert 16 GB USB Flash Drive or >) and it said it will be created now (after I clicked on Create), however the next screen said to insert > 7.5 GB flash drive, then it said it was cancelled.  I was attempting to use a San Disk Flash Drive and I am wondering if it is because it has some time of application on it.  I was under the understanding that it would just "delete/erase" this (format it) and then create it, but it wouldn't.  Any suggestions?

    In Windows 8, one can create a "recovery drive" (called a System Repair Disc in Windows 7) that does not contain the recovery partition. (When you install Windows 8 yourself, there is no recovery partition.) It contains just the recovery environment.
       Create a USB recovery drive      [edited to repair the link]
    Not sure what Shirley did, because it shouldn't take even that much space.
    -Jerry

  • Apple USB Modem driver for Windows 7?

    I installed Windows 7 on the boot camp partition. After running Boot Camp software update 3.2, all the windows drivers loaded except for the Apple USB modem.  Does boot camp v3.2 support the Apple USB modem in windows 7?

    You can find the drivers in the following location.
    Disc: Mac OS X Install DVD (The one used for installing Bootcamp)
    Folder: \Boot Camp\Drivers
    Exe: MotorolaSetup.exe
    Modem: Motorola SM56 USB Data Fax Modem
    Also, you may need to change the compatibility to "Windows XP (Service Pack 3)" so it will install properly.
    Hope this will help.

  • I am confused by the installation step that requires you to create a bootable USB drive for windows installation.  What is the ISO image and why has it selected my Passport backup drive as the destination disc?

    In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation.  To do so, I must choose an ISO image.  What is that?  When I click "choose" I don't understand the options presented.  Is this the destination of the partition or where Windows will reside on the Mac?  Why does it also indicate the the destination disk si my WD Passport Back up drive?

    OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive).  I also have  the discs for both 64bit and 32bit Windows along with the product key.  I am still not sure what to do when faced with the options after "choose".

  • Writing USB-Serial Converter Device Driver for Windows CE 6.0

    Dear Developers,
          I have a Silicon Labs chip Cp2108. Its a Quad USB to Serial converter. It supports all the operating systems except Win CE. So I have the source code of the driver for Linux 2.6 / Linux 3.0. I have experience in Device drivers development
    in Linux.
      Question is How will I start coding driver for Windows CE 6.0. Can anyone point me to a best starting point on this topic. All I need to do is make this chip work with WIN CE 6.0. Can anyone point me to a Sample driver source code It will be great.
     Regards,
         Winston

    Dear Vinoth, 
            Thanks for the valuable reply. 
      I am confused a bit here. I need to make the external USB -UART bridge (CP2108) work on win CE 7.
       the driver in Path \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\USB\CLASS\USBSER is using the built in USB controller
    hardware and making it as a Serial port right ? 
       How do you go about making the external USB -UART bridge work as a COM port ? 
     I have a document from SIlicon Labs which gives info about Device descriptors and interface commands . 
      Regards,
        Winston 

  • Cannot install NEC USB 3.0 Driver for Windows 7 - Now no USB 3.0

    I was trying to update the usb 3.0 driver on my G770 - connecting a USB 3.0 portable drive (or USB 3.0 flash) would slow down Windows and browsing from folder to folder would hang.
    I downloaded the latest driver from the site...
    NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit) - Lenovo G770 Notebook (IN5CAR01WW5.exe)
    and it asks for Renesas Electronics USB 3.0 Host Controller Driver disk during the installation.
    Renesas Electronics USB 3.0 Host Controller Driver for Windows XP exists but the driver for Windows 7 is NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit)
    What to do?
    error:

    Use the windows XP driver. They normally work fine.

  • HT201269 how to download apple usb driver  for windows 7 32 bit

    how to download apple usb driver  for windows 7 32 bit

    Try this:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Then install this:
    http://support.apple.com/kb/dl1614
    Windows XP Service Pack 2 or later
    32-bit editions of Windows Vista or 32-bit editions of Windows 7, and Windows 8

  • How to install USB driver for Windows?

    I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
    After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
    When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
    There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
    Can anyone make sense of this for me?

    Orthoducks wrote:
    I'll so my best to answer the questions.
    >...what you're looking to do a transfer with...?
    Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
    Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
    >Also, have you tried any other computers?
    No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
    Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
    >And which software version if your phone currently running?
    That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
    Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
    >Often times, the device drivers you're prompted to install are supported solely by the computer's software.
    I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
    You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
    The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
    Good Luck

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • How to install USB flash drive in windows 7

    Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.   

    Hi,
    Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
      http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&​cc=us&docname=c00033108
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Lenovo Thinkpad 8 Wifi driver for Windows 10?

    I've installed Windows 10 Technical Preview on my Lenovo Thinkpad 8. It's been working pretty nicely, except for one thing: the Broadcom Wifi card driver (Broadcom BCM4324 Wireless LAN Driver). Since this doesn't work I have to use a USB antenna.
    This driver has gotten no update since the release of the Thinkpad 8! I tried running it in "Windows 8 compatibiliy mode" and that still doen't work. Does anŷone know of a possible way to make it work (either with an update, or an older driver in compatibility mode)? Any idea or suggestion (or word from Broadcom) is welcome!

    I had the same problem and installed the Win 8.1 version of the driver.
    First deinstall the microsoft driver, download the driver from http://support.lenovo.com/<xx>/<xx>/products/tablets/thinkpad-tablet-series/thinkpad-8/?tabName=Down...
    replace <xx> by your language code. eg. en (my language code was de)
    look for Broadcom BCM4324 Wireless LAN Driver for Windows 8.1 (32-bit) - ThinkPad 8 or (64-bit in case)
    Start the installer and you're done.
    strolchi

  • HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

    Dear
    I need
    HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
    can anyone provide me ? no links to read text, direct solution is welcomed
    thanks in all

    Hi.
    You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
    For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
    Please let me know of any issuesm
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit

    I had an issue with installing an HP LaserJet 5 printer to a WIndows 7 64-bit box.  I thought I would post my experience and solution to this problem so that others can quickly resolve similar issues.
    If you connect as I did with a Parallel Printer-to-USB cable, then Win-7 searches for drivers automatically. But none werre found. However, using "Add Printer" via Control Panel/View Devices and Printers/Printers and Faxes, then left click starts the process for finding and installing the HP driver needed.
    No need as others have suggested to go to HP Support Center to install their Universal Printing PCL 5 driver found here:
    www1.hp.com/...Universal Print Driver for Windows PCL5/
    Hope this helps speed you on your way!

    Thanks for sharing your tip RatioCynic!  That's what this forum is all about!
    Happy printing!
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

Maybe you are looking for

  • *.rar file not open in Linux!

    Hello, friends! I don't open .rar file in linux Oracle 6. Tell me please how do it?

  • Re: How to avoid APPS password displayed in Unix box  .

    Hi How to avoid APPS password displayed in Unix box by using ps command for concurrent program with execution method set as "host" . Regards .

  • Flash gradient mask problem

    Having a bad day everything i do doesn't work today... I am trying to create a gradient mask but because its not on the main timeline also its in a nested swf, just can't get it working, this is what I was using and tried it with _parent.(instanceNam

  • Address Book's entries have disappeared - all except two

    Hello everyone. I'm hoping that members might be able to offer me some advice about a problem I'm having with Address Book. I use an intel iMac running OS 10.4.11 and Address Book 4.0.6. This morning I used iSync to synchronise my Palm TX with the iM

  • Transfer photos/video from my 6085 to my p.c.

    Hi Folks I've been trying for the last few days to transfer some photos taken on my 6085 to my p.c. via the nokia connectivity cable CA-53, plus to down load the p.c. suite to now avail. Infact the suite that I downloaded from this website this morni