USB 2.0 devices get slow after standby / hibernation when docked for Windows 7

Hello,
I am the proud owner of a Lenovo ThinkPad T400. I am having difficulty with my usb 2.0 devices not hooking up to my computer after I resume my computer from hibernation or sleep modes. I tried searching the forum for someone who has had the problem and I seem to have found nothing, but if I missed something I am sorry for the inconvenience. I found this link (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73031) but this fix is for XP. Should this still work the same for 7? Is there any other fix that I do not know about?
Thanks in advance for your help.

pjg,
Did you have the same problem with your T500? I did not ever to seem to have this problem until recently. I am trying to figure out if I am missing something inside windows that would detect all of the USB components plugged into it. I don't remember having this problem with Vista. I would not think that there should be much of a difference, with respect to this issue, from Vista to 7.
I bought my machine when Vista was available and I did not notice a long lag time for USB devices, so I upgraded to 7 and I just re-installed all of the software that Lenovo puts on their machines (the preloaded factory stuff) and there was no change. I am running out of ideas to try and fix this.

Similar Messages

  • Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    Jennifer...
    Follow the instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • I wanted to know if iphone 3gs gets slow after updating to ios5?

    I wanted to know if iphone 3gs gets slow after updating to ios5?..and what features are missing for 3gs

    I have iphone3gs just upgraded to iOS5 just now.
    So far i am not experiencing any slow down because of the new iOS.. Rather i feel like its slightly faster than the previous version (4.3.5)..
    One of the first thing i want to try was the location based reminders.. After upgrade i coudn't find the option, and went trough the user manual to find out that it is not available for 3gs..:(

  • Firefox get slow after while

    hello all, always my firefox get slow after being used for 2h or 1h i get this message in my event viewer
    Faulting application name: plugin-container.exe, version: 36.0.1.5542, time stamp: 0x54f851c0
    Faulting module name: xul.dll, version: 36.0.1.5542, time stamp: 0x54f85115
    Exception code: 0xc0000005
    Fault offset: 0x011afb85
    Faulting process id: 0x1528
    Faulting application start time: 0x01d05c55ff96f561
    Faulting application path: C:\Program Files (x86)\Mozilla Firefox\plugin-container.exe
    Faulting module path: C:\Program Files (x86)\Mozilla Firefox\xul.dll
    Report Id: 3d950c7c-c849-11e4-8099-002186899b43
    looking forward,

    [[What is plugin-container]] and how to troubleshoot it becoming slow: [[Firefox is slow - How to make it faster]]

  • After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

    After installing the safari update for windows, outlook is now not opening email hyperlinks.  I have set safari to be my default browser but outlook won't open it when I click a link.  I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator."  Please help.

    Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
    This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
    To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
    * http://windowssecrets.com/forums/
    * [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
    * [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

  • After downloading Namoroka 64 bit for windows 7 all my search engines are gone. What happened and how do I get them back?

    After downloading Namoroka 64 bit for windows 7 all my search engines are gone. What happened and how do I get them back?
    == This happened ==
    Every time Firefox opened
    == This week ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; FunWebProducts; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.6)

    Do they appear if you start Firefox in Safe Mode? See [[Safe Mode]]

  • ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

    After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
    Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
    There was one other error I came across after trying to launch iTunes after installation.
    See both error messages here:
    http://screencast.com/t/DSg4PpKF5BeX

    Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
    I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
    But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
    It should have been added to their page at 
    http://support.apple.com/kb/HT1923
    by now, why hasn't it???
    It's not good enough!
    Re:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
    "C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
    AHA! This entry for iPodService.exe still exhisted.  So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
    Step 5 - Delete only the Registry entry above.  NO REBOOT
    Step 6 - Reinstall iTunes64.exe

  • I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver.

    I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver. My mac version is 10.8.3

    Welcome to the Apple Support Communities
    Install the Windows support software from the USB drive. Note that Boot Camp Assistant, in OS X 10.8.3, doesn't support the option to burn the Windows support software into a disc.
    Instead, you can try a different thing. Start in Windows and download the Windows support software in it > http://support.apple.com/kb/DL1638 Then, decompress the file and run the Boot Camp drivers installer.
    If you can't access to the Internet in Windows, start in OS X and download the Windows support software from the same link. Decompress the file, right-click the folder which will show up after decompressing the file and select "Burn". Finally, start in Windows and install the Boot Camp drivers

  • If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

    If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

    If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
    If you want to run Mac and Windows at the same time, you could do what I did:
    Get Parallels
    Install Windows as VM on top of Parallels
    Install Office in Windows
    Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
    It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

  • TS3694 iOS: Device detected but not identified properly on iTunes for Windows error 54

    iOS: Device detected but not identified properly on iTunes for Windows error 54 my iPhone 4s ois 7.1.2 my pc is windows 8.1 my iTunes ver 11.3.1.2. I cant sync with itunes

    Look in your Pictures folder and delete the iPhone Photo Cache.

  • HELP! Where do I get the software development kit 1.3 for windows 98?

    HELP! Where do I get the software development kit 1.3 for windows 98? I got this java book and it tells me "http://java.sun.com". I guess it expects me to find it myself. I aint no good at finding stuff on the internet. Can someone give me like the exact address to download it or something? (Also, it wants me to get the java software development kit installation instructions and documentation... I have no idea what all that stuff is, or where to find it. I'm completely lost... Can someone tell me where to get that stuff?)

    Actually, the latest version is now jsdk 1.4.1
    From java.sun.com, you can click on "Downloads" at the left
    Then, you click on "java 2 platform, standard edition"
    Then, you can click on "J2SE 1.4.1"
    This leads to a page with the URL http://java.sun.com/j2se/1.4.1/download.html (you could use this URL wight now, in fact)
    That page has a table.. look for the row entitled "Windows (all languages, including English)", and in the column headed "SDK", you'll see a link "DOWNLOAD". Click on it (make sure you click on the right one!)
    You will then have to read the terms and conditions, and at the bottom, click the button labeled "ACCEPT"
    This will show a page with a link "Download j2sdk-1_4_1-windows-i586.exe"
    You click on that link, and the download will start. The file you are downloading is the installer for the J2sdk version 1.4.1
    Hope that helps!!
    Once you have downloaded it, you'll need to set it up. That's not very difficult, but if you need advice on that, I'll be watching this thread.
    Yours, Mike H...

  • System gets Slow after 10.6.5 update

    So, I just updated it using standalone combo installer and straight away notice that to repair the disc permitions now takes 3 mins, before it took only 1min. even if there is nothing to repair. and futher more my whole system gets very slow after a few hours of using safari, skype, vuze, together and wasn't able to shut down just after using safari alone, had to press the power. havent been using anything else for so long so dont know how about it, but it seems to be ok. ah, im using airport to get to the internet if that's important.

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X,
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Firefox gets slow after awhile and also hangs and sometimes i get plugin-container.exe error

    Hello, it's a while that Firefox gets slow and also hangs and sometimes i get plugin-container.exe error...
    I'm not sure but maybe it often happens after monitor goes to Screen Saver or after it turns off...
    Error signature
    AppName: plugin-container.exe AppVer:1.2.9.3951
    ModVer: 5.1.2600.5512 Offset:0000100b

    You can run Java in Firefox.exe instead of plugin-container.exe, but I'm not sure that actually would be better than where you are now.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''java''' and pause while the list is filtered
    (3) If '''dom.ipc.plugins.java.enabled''' is true (bolded), right-click it and choose Reset (or double-click it to toggle).
    If that value already is false, you might be having a problem with another common plugin such as Flash.

  • Iphone get slower after downlaoding ios 7

    my iphone 4 has become very slow after downlaoding ios 7. games stuck and apps open slowly,screen lock stuck some time. during typing a message text shows after some time.

    Hi tj786,
    Thanks for visiting Apple Support Communities.
    If you are experiencing performance issues after upgrading to iOS 7, follow these steps:
    If you have not already, I recommend first restarting, and then resetting your iPhone:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article with these steps here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If you are still experiencing the same issue, I recommend resetting all settings next:
    Go to Settings > General > Reset, then choose Reset All Settings:  All your preferences and settings are reset.
    Reset iPhone settings
    http://help.apple.com/iphone/7/#/iph7a2a9399b
    If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Best,
    Jeremy

  • Getting slow after one month

    Hi,
    I bought my mac last month and everything was super! Until recently, I just noticed that my mac is getting slow. For example, if I go to 'Finder/Applications my sub-menus don't open as they used to (I have as "View: Show items as icons, in a list, in columns, or with cover flow" . It takes second to do preview to look at folders.
    Please advice. What can I do????????? Everything is fine. I am happy with it I just liked the quick/fast privilege that Mac has
    Thank you so much.
    cnia2

    here is the answer to that problem, might sound crazy, but it dose work !!
    "The way to fix the five second openning on the folders. Jack the double mouse click speed to the highest setting. The higher the double click the faster the folders in the finder open. Sounds crazy, but it work for me. When set to a low setting the folders in the finder take about 3-5 seocnds to open. I sent bug reports to Apple."
    http://forums.macrumors.com/showthread.php?t=464580&highlight=Finderbecomeslow

Maybe you are looking for

  • ALV Sub total texts. displayed in list not in grid.

    Hi, I am displaying data using alv and sub-totals on a particular column. i am getting the sub-totals but i am not getting the sub-total texts when i am displaying data in a grid. 'REUSE_ALV_GRID_DISPLAY'. i am getting subtotals and subtotal texts wh

  • Different accounting document type "WE" and "RE"

    Hi, I am currently coding to extract data from internal table BKPF and is facing a problem with field BLART (document type). Understand that there are records for "WE" (Goods Reciept) and "RE" (Invoice Receipt) found in this table. May i know what ar

  • Solaris 10 Update 5 release date question

    Did I miss the release of Update 5? I see it mentioned in docs.sun.com, but not in downloads. Or does anyone have availability date for it? It seems overdue timewise.

  • Adobe flex integration into abap webdynpro

    hi experts, i am new adobe flex development. i am following a tutorial preapred by thomas jung Adobe Flash Islands for Web Dynpro ABAP u2013 Tutorial #1, he used flex 3 to develop the flex application. i am using flex 4 downloaded from adobe. i follo

  • Unable to open files, all .nfo files

    im unable to open files in the most folders, all files are .nfo