USB 2.0 driver needed for Zen Touch 20

Iam a Linux user and seem to have read that special drivers are necessary for the Zen to be recognized (on Windows, obviously). That is not how USB is supposed to work. Can anyone confirm that special software must be used for any USB aware computer to recognize the Zen?

I didn't really understand your question but I hope this clears out any doubt you have. I use both OS's Linux and Windows. Under linux I managed to use my zen touch by installing the gnomad application. I didn't had to install anything else to use it, I was using suse and before installing gnomad all the hardware drivers were already installed by suse. In windows the only thing I had to install were the drivers that came with the zen touch's cd or the one available at the download section. to be able to transfer data to it you will need to install the nomad explorer, for music you can either use window media player 0 or nomad explorer. Besides that nothing else is needed to be installed. There has been some post complaining about some usb adapters not being able to detect the zen touch, what SSR recommends (and me too) is that you install the latest drivers for your motherboard and if it still doesn't work buy a PCI usb 2.0 adapter. Good luck!Message Edited by lsd_us3r on 08-06-2005 :35 PM

Similar Messages

  • I Need the driver CD for Zen To

    i need the driver CD for my Creative Zen Touch for Windows XP
    because i lost it
    and how can I contakt the german creative support
    i dont know how i can contact creative with phone
    is there any german Creative forum ?
    or have anyone an idea how i can get the driver cd for Zen TouchMessage Edited by T3chn0fr3ak on 03-26-2006:36 PM

    Hi, ich denke mal, ich kann dir auch in deutsch antworten.
    also von dem link oben aus, w?hlst du erst mal mp3 player, dann zen und schlie?lich zen touch. auf der n?chsten seite kannst du dann dein betriebssytem ausw?hlen (sprache ist egal) und w?hlst dann noch driver aus. dann hast du auf der n?chsten seite nur eine datei zur auswahl, n?mlich den aktuellen treiber f?r windows xp f?r einen zen touch mit der alten V. Firmware. Dann m?te WIndows den Player erkennen. Zum Transfer von Musikdateien, empfehle ich dir dann noch den Nomad Explorer runterzuladen, den w?rdest du dann finden, wenn du oben anstatt driver, application ausw?hlst. Der macht das ?berspielen und verwalten der Musikdateien einfacher.
    Ansonsten besteht auch noch die M?glichkeit, die Firmware des Players upzudaten, auf die V.2 mit der Playsforsure F?higkeit. Dann reicht es, wenn auf einem Computer XP und der Mediaplayer 0 installiert sind. Ein Treiber w?re dann nicht mehr n?tig.
    Ich empfehle dir allerdings, erst mal die treibervariante auszuprobieren, da das update nicht mehr r?ckgangig zu machen ist, und wenn du mit der alten variante zufrieden bist, ein update nicht zwingend n?tig ist.
    wenn du noch fragen hast, dann schick mir ne pers?nlich nachricht, ich bin eigentlich alle zwei, drei tage in diesem forum.

  • Requirements for JDBC Driver needed for SOA 8 }connection pool

    Hi,
    I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
    What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
    Thanks.
    Lorenzo Jimenez

    You can use pretty much any jdbc driver, including type 2 and type 4.
    You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
    Other than that, it is no different than configuring any other driver.

  • Windows 8.1 display driver needed for HP G62 laptop

    Windows 8.1 display driver needed for HP G62 laptop

    Help us to help you by posting the following information.
    1.  The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
    2.  The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
    It would also help if you let us know which CPU your notebook has installed.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Hp hs2434 windows 7 driver needed for dm1 4310nr

    Hi all,
    I recently formatted my dm1 4310nr from windows 8 to windows 7.  I went to the driver page for the dm1 and it had the Ericsson HP hs2320/hs2330/lc2000/lc2010/hs2340 drivers for win7/8, but not the HP hs2434 drivers.
    The hardware ID is 
    USB\VID_03F0&PID_4B1D&REV_0002&MI_05
    USB\VID_03F0&PID_4B1D&MI_05
    Thanks!

    You don't need monitor drivers, the operating system runs it natively (plug'n'play).
    What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

  • Win7 64bit Drivers needed for pavilion touch laptop

    Hi 
    I have just bought a HP pavilion touchsmart 14-n056ea that came with windows 8. I am using it for work and they have given me a windows 7 pro 64bit OS to use instead as it works better with their systems. i have formatted the drive and installed the win7 OS now but the drivers online are only for windows 8. Can anyone please help me to source some windows 7 drivers. Below are the hardware id's for the ones that are popping up in yellow in the device manager.
    ethernet controller
    PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C&REV_08
    PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C
    PCI\VEN_10EC&DEV_8136&CC_020000
    PCI\VEN_10EC&DEV_8136&CC_0200
    network controller
    PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C&REV_01
    PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C
    PCI\VEN_10EC&DEV_8179&CC_028000
    PCI\VEN_10EC&DEV_8179&CC_0280
    pci communications controller
    PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C3A&CC_078000
    PCI\VEN_8086&DEV_9C3A&CC_0780
    sm bus controller
    PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C22&CC_0C0500
    PCI\VEN_8086&DEV_9C22&CC_0C05
    usb controller
    PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C31&CC_0C0330
    PCI\VEN_8086&DEV_9C31&CC_0C03
    unkown
    ACPI\HPQ6007
    *HPQ6007
    graphics controller
    PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C&REV_0B
    PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C
    PCI\VEN_8086&DEV_0A16&CC_030000
    PCI\VEN_8086&DEV_0A16&CC_0300
    i need a driver for audio too but windows is using its own one which seems to be working but would prefer the correct one.
    many thanks in advance guys.
    This question was solved.
    View Solution.

    Hi:
    You can use all of the W7 x64 drivers and software from this model, except the audio.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
    Audio:  Install third and reboot.  Accept the agreement, download and install the second driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    To save you time wondering what drivers you need for the ID's you posted, here they are...
    sm bus controller.  Install first and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...
    graphics controller:  Install second and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...
    ethernet controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
    network controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128935-1&cc=us&dlc=en&lc=en...
    pci communications controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127794-1&cc=us&dlc=en&lc=en...
    usb controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...
    unknown:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

  • Which Media Explorer version do i need for Zen Micro 5gb with Firmware 2.20.

    <FONT color=#006633 size=3>Same old story, been trying for hours and hours to transfer music onto the player. Searching forums for answers.
    <FONT color=#006633 size=3>
    <FONT color=#006633 size=3>I have tried installing Creative Zen Micro Media Explorer Web Update (<B>48.24 MB</B>) but it doesn't recognise my player is plugged in.
    <FONT color=#006633 size=3>
    <FONT color=#006633 size=3>Also tried installing Creative MediaSource Plugin for PlaysForSure devices (version .00.8) (<B>23.98 MB</B>) but Win Media Player 0 still doesn't recognise the player.
    <FONT color=#006633 size=3>
    <FONT color=#006633 size=3>Should i bother installing software/drivers from the original CD i got? Or download them instead? Which do i need to download? Do i need to change the firmware?
    <FONT color=#006633 size=3>
    <FONT color=#006633 size=3>I know these questions have been asked thousands of times, but all the answers i have read don't seem to be doing the trick.
    <FONT color=#006633 size=3>
    <FONT color=#006633 size=3>Cheers for any help given.

    Hurrah, i FINALLY got it working.
    Installed drivers/software from original cd.
    Downloaded/installed the Creative MediaSource Plugin for PlaysForSure devices (version .00.8) (23.98 MB) and managed to get the 'sync' feature working in WMP0.
    Downloaded/installed Creative Zen Micro Media Explorer Web Update (<B>48.24 MB</B>) but it wasn't detecting my Zen.
    Went into Device Manager and firstly uninstalled the MTP Device under Windows Portable Devices.
    Connected Zen again, went into Device Manager again, right clicked on the MTP device and clicked on Update Driver.
    The Zen Micro Media Explorer Web Update then detected my device and installed.

  • ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

    Hi guys!
    How's everybody doin?
    I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
    I'm using 2 HD's (one with OS9), the other (with OSX)
    I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
    Thanx
    Everyone is very helpful around here
    Mike

    Hello again Carl, and Dave
    I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
    with 9.2 and the ATI 9000 Mac Pro - take a look:
    http://discussions.apple.com/message.jspa?messageID=4289264#4289264
    Wonder if your driver would solve this?
    But can I put your driver in the system while it's still functioning with the older OEM video card back in?
    (that's the only way I can get the system not to freeze)
    Thanks
    Mike

  • Lenovo G50-45 why is no USB 3.0 driver listed for this model

    I started a clean boot of Windows 7 x64 from USB as I'm not a fan of Windows 8 but since installing I've been unable to get the USB 3.0 port to recognize anything I plug in (was working fine before).
    I can't see a USB 3.0 driver listed on the support page for this model:
    https://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-45-notebo...
    I've also read similar problems have occured on other manufacturers laptops and this was fixed by installing the chipset drivers etc in the correct order.
    Is there a correct order I should adhere to?
    Any help much appreciated

    I am having the exact same issue on my 2013 MBPr.
    I have two Seagate GoFlex USB 3.0s, one plugged into the regular 3.0 port (450MB/s) on the left and the other plugged into the high-speed (5GB/s) 3.0 port on the right. When doing a simple copy/paste from the one drive to the other, I observe the following speeds:
    Peak Read (USB 3.0): 36.2Mb/s (288Mbit/s)
    Peak Write (USB-HS 3.0): 48.7Mb/s (384Mbit/s)
    This is far below the 620MB/s for 3.0 and is more around the 35MB/s USB 2.0 standard.
    So, I'm likely to agree with the original compaintant that the 3.0 standards aren't being employed by the MacOSX USB drivers and I'd hope to see a fix soon for these issues lest people start moving off of the Mac platforms to other vendors who adhere to industry guidelines.

  • USB 1.1 & Protected WMA on Zen Touch quest

    Im thinkin about getting a Zen Touch and i have a couple of questions.
    The first im sure i can get an easy yes to, does zen touch support usb .
    The second however, is a question that i often find avoided on sites and put in fine print.
    Many companies advertise supporting WMA format, but not the <EM>protected</EM> WMA format that music stores such as Musicmatch sell.
    My question obviously, is does the Zen Touch player support protected WMA files that i download from Musicmatch?
    Thanks
    p.s. Does the Zen Touch have a "shuffle" feature like on the iPod that shuffles all the music or just the music on your playlist?Message Edited by JKORCA on 03-08-2005 0:39 PM

    'Yes' to all three questions:
    USB . compatible - yes.
    Can play WMA protected DRM - fairly certain it does, but I've never used it myself - anyone want to confirm?
    Shuffle all - yes - there's a button the front labelled 'random' which shuffles all the tracks on the player.

  • CanoScan 88))F driver needed for Snow Leopard

    I need a Driver for the Canon CanoScan 8800F. It does not work with the system. I checked ith Caon and there isn't a driver for it. Does anyone know how to fix it?

    Looking at the Canon Australia web site, there is a version 13.9.1 driver posted for the CS8800F that quotes 10.6 as being supported.
    http://support-au.canon.com.au/contents/AU/EN/0100018002.html

  • Firmware Update???? for Zen Touch??

    Does anyone know when a new updated firmware version for the Zen Touch will be released? it has has been 9 months...since,are Creative updating versions once a year I am told,by an insider?.Message Edited by cus07 on 07-3-2005 06:45 AMMessage Edited by cus07 on 07-3-2005 06:54 AMMessage Edited by cus07 on 07-3-2005 07:54 AMMessage Edited by cus07 on 07-3-2005 07:55 AM

    I have looked pretty much everywhere to get some idea. I have seen it discussed, but with no real answer. It would be really nice ( respectfully) to know just ... IF... it was coming. Either way. And then a ball park.
    This is a really nice unit , but I want one Audible ready that is EXACTLY like the Touch. If I just knew if it was coming, I would be free to buy another elsewhere. I totally love the Zen Nano Plus line and will just have to settle with those. I mainly use Audible, and Old Time Radio etc, Art Bell streams etc.
    Oh well....moderator go out on a limb!
    Thanks

  • Canon 3245 driver needed for Mac OS X Yosemite 10.10.1

    Dear
    All the drivers available on Canon website do not support version 10.10.1
    I am urgently in the need for a driver Canon 3245.
    Please help.
    Thanks and Regards
    Shubham
    Mackbook Pro, OS X Yosemite, Version 10.10.1

    This includes drivers for 10.10
    http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _3225_3230_3235_3235i_3245_3245i/imagerunner_3235#DriversAndSoftware

  • Web-Cam: Linux Driver Needed For T400

    Hi all,
    I have Lenovo T400 that works perfectly.  Had Win-7 Ultimate dual-booting with new install of Linux Mint 9 (Isadora).  Decided to delete Win-7 Ultimate.
    Linux Mint OS 9 fully confiqured and running nicely recognizing all hardware except FingerPrint and Webcam device.
    The Fingerprint device is cool, but would like Webcam Device Driver.
    Is there a Webcam driver available for the Lenovo T400?  If so, please reply,
    Warmest Regards,
    ~ digi

    In a terminal as your user:
    [code]
    lsusb
    [/code]
    You will see the device ID code for your camera. Here is mine on ThinkPad Edge: 04f2:b1cf
    You can then do a google search for "Linux web cam xxxx:xxxx" compatibility.  It is likely that the driver is already loaded because of the auto detect function of the kernel scripts.
    You can check that in a terminal as your user:
    [code]
    lsmod
    [/code]
    Look for modules: v4l1_compat, videodev, uvcvideo.
    Neal

  • USB Cable replacement for ZEN touch (40

    I have lost my USB cable and was wondering if all creative products deal with the same typ e of USB connection because I have looked for a replacement and only found ones that were compatible with such creative players as zen xtra or zen nx

    Any USB A to mini B cable should work. IF you have a digital camera, you may already have one.
    Here's an example:
    http://www.cablestogo.com/product.as...d=50&sku=27329

Maybe you are looking for

  • Need Suggestion on performance of Popups

    i have some performance issue on Popups display. presently using "dhtmlmodal.open" to display a popup, this is time consuming to display the popup and the page contents. is there any other alternative within JSF1.1 without using 3rd party library or

  • Is InfoPackage Group is the only way to run the InfoPackages Parallel???

    Hello BW Experts, If we want to divide a huge full upload InfoPackage with certain selection ranges in each InfoPackage, do we have to run them one by one according to our selcetions or can we run them parallel to each other?? If we run these IPs par

  • How to find driver program from sapscript

    hi how do i find name of the report where the sapscript is used. I have one sapscript & a subroutine pool but name of the report is where this script elements are called is not known. The program is executed through transaction & first page of output

  • SMB Sharing, my entire "username"/"account" is visible from Windows 7

    I have a windows sharing enabled, my username's public folder, but when I view the files share on the network, the entire user account is visible, I even manage to copy files to the "Desktop" of the mac. Could this be due to me renaming my "account".

  • Imovie '11 special effects

    i want to use the special effect of "flash and hold last frame". but when i go and click on "clip" in the menu, the drop down under special effects is greyed out. what am i doing wrong?