USB 2.0 on D-bracket not working in WinXP

Only the USB 1.1 ports work.  Device manger lists the 2.0 controler and ports as working properly.  Tried disabling Windows XP from disconnecting power to device to.  NOPE.  Using latest USB 2.0 drivers from MSI (Microsoft?)
Is it supposed to work?
KT3 Ultra 2  (bios 5.5)
AMD 1600XP
256 DDR ram
Promise Ultra pci Ultra 100 controller
Maxtor and IBM hd's
Creative 12x DVD
Benq 48x CD-RW
Visiontek Geforce 3 Ti 200 AGP card
Creative Sblive! MP3

NOPE.  Itis NOT using USB 2.0.
Quote
Originally posted by gregz_kt3_2
I tried connecting the the cable to another set of USB pins on the motherboad-- NOT the blue one -- and it works! Device manger still shows the same devices. This is the KT3 Ultra 2.  Isn't the blue one for USB 2.0 :O .  Now I need to obtain a bona fide USB 2.0 device to test the ransfer rate, but at least I have 04 work working USB ports.

Similar Messages

  • TS2771 i am trying to fix my ipod touch tryed password to many times the problem is my usb port on my computer does not work what else can i try?

    my sons ipod is disabled from trying password to many times my usb port on my computer does not work. what else can i do to get this disabled off my sons ipod please help!!!

    The only thing you can do is place the iPod in Recovery mode and restore via iTunes on a computer. It is a good security feature.

  • The display speakers, the camera display, and all three USB outputs in the back are not working?

    The speakers, the camera display, and all the USB outputs in the back are not working.
    I was typing a paper last night when the electricity went off, and 5min later went back on, and all the display speakers, the camera display, and all the USB outputs in the back are not working.
    FYI, it's LED Cinema display.
    Solutions? Suggestions?

    Hi,
    Actually BACK is standard user command so it is not stopping and going to selection screen.
    Give some other use command like 'BCK' and try....

  • Bracket not working with french keyboard

    Hello
    I use an English version of After effect ( I prefer) and I have a french keyboard. I can say it works great all the time but I still can't use the [ ] bracket.
    In the french Keyboard it is Alt+shift+(      ( Left parenthesese is on the 5 key ).
    When I type Alt+shift+[ on After It happen nothing??
    If I swith to american language Alt+[ it works fine.
    I don't understand
    I someone in the same configuration could help me
    Thank you

    Alvanh - I had similar problems with a German keyboard. Try installing the script called Keyed Up. This will let you change shortcuts at will, and should allow you to find replacements on a French keyboard that work. It can be found here:
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1698043
    Or are you on CC? This script might not work on CC...

  • HT204384 USB Port and SD card port not working

    My USB ports and my SD card port do not work. They have both worked previously, but now do not read anything on my new Mac Book Pro.

    If you are still under warrantee, take advantage of it and go to the Apple store.
    Ciao.

  • USB Connect Cisco for Mac does not work

    I created a USB for Cisco Connect on my desktop with Windows XP but it will not work to connect a Mac to the Internet.
    When I insert the USB, the Connect Icon will not execute. Is there something special that has to be done?

    Hey! Are you referring to the Cisco Connect software installed in the router? What's the model number of your router? Or if you're referring to the Smart Wifi software's USB feature, you may check this link:
    http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=f2fd60559043499c8643c3deea7c8ede_Overview_of_the_...

  • Sound issues; slow response; usb ports unreliable and sd reader not working

    The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
    About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
    I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
    PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
    Help!!!
    Alfriston

    Hi again Alfriston,
    Thank you for the clarification!
    To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link. 
    If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
    In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
    To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
    To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
    If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • USB ports and memory card slots not working

    My Pavilion a6120n desktop has worked brilliantly ever since I purchased it. As of last week the 2 usb ports in the front and the 2 unused usb ports in the back have stopped working. My printer is plugged into one rear port and my wireless mouse is plugged into a second rear port and these work fine.  I generally use a memory stick for data swapping or the card reader slots (which have also stopped working). I no longer see the memory card icons in the "Computer" window. When installing something new the "New Hardware Found" statement pops up but the driver install always fails. I think it is a software issue but there are no usb drivers to download on the HP/support site that I can find. . . so . . . Below is what I have tried so far.Run antivirus software. Full scan & memory scan - no issuesRun malewarebytes full scan - no issues I have tried restarting several times with no success. Restore to several previous restore points = failedRestarting computer in repair mode = failedRun the repair disk that I had made = failedChecked the power management for each usb port to see if the power was routed properly = okRemoved the case cover and carefully inspected the wiring and connectors.finally I tried uninstalling the usb drivers = failed  Upon restarting the computer the last time the startup file must have failed and after several hours of attempting a repair I had to reinstall the Window 7 completely. Still no usb or memory card function. Any help would be appreciated Thanks,MrBob38

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the USB ports and memory card slots are not working, and I would be happy to assist you in this matter! Since you mentioned that you have already re-installed Windows 7 on your computer, and the USB ports still do not work, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • Mouse not working in winxp

    I have just put the k8t neo board and athlon 64 3200 in my sytem - the trouble is the mouse won't work in winxp pro it boots to the log on screen but i can't select the user so I can't log on and go anu further. No joy if I boot to safe mode either.
    Are there keyboard shortcuts to move the mouse? at least then I might be able to sort it out - tried my wireless intellimouse explorer and old intellimouse explorer with USB and PS2
    I plugged in an old HD with win98 on and it works fine, any ideas.
    MSI K8T Neo
    Athlon 64 3200
    radeon 9700
    512mb 2700 ram
    2 120 gig ide hd's
    macron 400W PSU

    It seemed to be running fine in win98 so I left it running overnight - still fine in the morning CPU temp about 53 degrees, not ideal but ok. came home from work and it was dead.
    My son went on it during the day, rebooted and said it couldn't find the hard drive and wouldn't boot. now all it does is go in an endless cycle of looking at the cd rom and hd but won't boot - no beeps, no picture , no keyboard nothing.
    I also have an abit max3 which i have tried with the same CPU (3200+) but that won,t boot with a radeon 9700 or 9800 but works ok with a 9000 and a gforce3.
    I bought a tagan 480W PSU but no difference with the MSI (28A on the 12V rail) not tried the abit yet cause removing the CPU is a nightmare. My first thoughts is that the CPU has died, any ideas.

  • [XP64] Microphone does not work in WinXP 64

    Hi,In Windows XP 64bit my microphone does not work, tried it in Ventrilo 2., Skype and even in the Windows Recorder. The computer don't detect any sound. Offcourse?I have selected the microphone in the recordering section in the Windows volume panel and the volume at maxium. Also in the volume panel under playback the microphone is not mute, set to max volume. I have also installed WinXP 32bits and here it works OK with exactly the same settings. Thats why I think it is because of my Soundcard driver, I have installed the latest driver from this site. I have a SoundBlaster X-Fi Fatality. Is there anyone with a X-Fi soundcard with the same problem or anyone where the microphone works in WinXP 64bit's Or is it a known problem?Please help me

    Hi Theicewarrior,?Creative support has been aware of this issue for quite some time (6+ months, maybe even a year). The 4GB+?RAM driver/addressing issues are not a priority or they would have been addressed quite some time ago.
    Presumably this is due to functional Vista drivers for the masses being a higher priority than the relati'vely few of us with 4GB+ RAM and an X-Fi.
    While the X-Fi?is a great card, my only wish was that the vendor was forthright about this product not functioning with certain configurations. It is my feeling that?making an effort to help?customers choose?products that will work with their configurations would result in satisfied and repeat customers?and a better bottom line?as opposed to?eeking a few extra dollars out of a slightly larger customer base and?who are then left unsatisfied with a product and unwilling to buy a company's products in the future.Message Edited by Foddan on 07-9-20070:45 AM

  • Remote not working with WinXP 64

    I have a X-FI Platinum card with the front module and remote. Under WinXP Pro everything worked fine. I have since upgraded to WinXP 64 bit Pro and the remote does not work.
    I have installed the latest driver for WinXP 64 (At least last weeks driver) which went OK. Soundcard seems to work OK. I have a 5. speaker setup and I get sound from all speakers. Before there was the createi've audio console that was in the system tray, but that doesn't seem to be there with WinXP 64.
    Is there another download that I need to do for the Remote to function ? Also I no longer have any sound test options in the audio console is there another download for that as well ??System Specs:ASUS P5N32 SLI Deluxe MOBOIntel P4 660 processor2 GB RAMBFG 7800 GT video cardX-FI Platinum sound cardWinXP Pro 64 bit?Thanks,?wstreaker

    I am not sure whether the remote software gets installed with the 64 bit drivers or not. I know some people have turned to alternate software to control the remote on WinXP 64 bit edition successfully. I am sure you can find out what I mean by searching these forums, I am not allowed to say any more than that. Hope that helps?

  • Webcam model PD0080 not working in WinXP

    I have Video Blaster Webcam Go Model PD0080 part #30PD008000000 camera which I am trying to get to work on a new computer using WinXP. Unfortunately I don't have any installation CD's or user guides. I was able to find and download the documentation and the driver to work with WinXP. The computer recognizes the camera but I can not get images downloaded into the computer.
    Looks like I might need the Webcam Go Control software which I don't have and don't see where to download it from.
    What do I need to do to get this camera to work under WinXP?
    Thanks,
    Nathan

    Nathan,
    You can get the software you want at Creative Asia download webpage.
    Jason

  • Rhythmania is not working in WinXP with Sound Blaster Live! - LiveDrvUni-Pack (Engli

    My Hardware is Creative Li've!, Model CT4760 and Operating System is Windows XP
    Rhythmania is not working, it returns a msg " No MIDI out device detected". Can any one solve this ?

    Can SOME kind soul give me a copy of the Installation disk for drivers and applications for the Creative Sound Blaster Li've! Value card? (I have the card but have misplaced ALL the installers I need: (i) Drivers for Windows.
    2) Utilities like (a) Creative PlayCentre (b) Creative Launcher
    (c) Prody Parrot (d) Creative Rhythmania
    (e) Creative WaveStudio (f) Creative Keytar
    (g) On-line Sound Blaster Li've! Tour and Demo
    (h) Music Library
    OS supported ?
    Is MICROSOFT Windows 95, Windows 98 and NT 4.
    PLEASE HELP!
    THANKS AND GOD BLESS!

  • Where are LETOOLS for USB? The "ADB" Driver does not work with Windows XP

    I just give up with Lenovo's arcane maze of endlessly-looping driver searches.  I managed somehow to get something called an "ADB Driver" which was supposed to allow Windows XP to recognize my tablet as a K1 Ideapad.  I downloaded the 8+mb file which installed fk knows where and plugged in my K1 tablet.  Windows recognized that it had a USB device, and when prompted to hunt for the driver (which of course I couldn't find, since Lenovo sent it into the ether) I had to back out and then hunt through my entire Windows directory for an inf file containing the word "Android". 
    For the unsuspecting, it hides in something called -- get ready for it -- OEM16. 
    I guess the L, N and V keys were missing on the keyboard of the moron who labeled this pos driver.  Oh good programming Lenovo NOT but since a chimpanzee programmed Lenovo's driver site I suppose it's of a piece that a baboon packaged this worthless driver.  This isn't an eCommerce site it's a zoo.
    I guess it was too difficult for Lenovo to include a CD with their Windows USB driver family on it.  I mean . . . that would have cost them $.0000002.  Jesus wept.
    All I want to do is have XP know that the "USB Human Interaction" device I have plugged in is my K1 Lenovo tablet.  Don't send me to Google for a USB/Windows Android driver, they direct everyone to the site of the manufacturer of the tablet.  And don't insult my intelligence by even countenancing the possibility that Google's arch rival would stoop to offer any means for their OS to talk to (cough hack) Android.
    I get that it has to be a Lenovo driver and/or program.  So where the f is it? because this is massively pissing me off.  And one other thing:  No link to Lenovo.  I don't appreciate being manipulated by Lenovo's flash crap only to land on a driver download site that says "We can't find it."
    No.  Direct me please to any non-lenovo download portal that has the most recent version of LETOOLS and hope I don't have to come back here with yet more frustration.  This is the most needlessly idiotic driver service I have ever had the misfortune of being tethered to and I hope never to have to engage with it ever again.  May I please know where LETOOLS can be downloaded?  Thank you.
    Product = K1 IDEAPAD / Born = September 16, 2011 / Sex = Android 3.1 / Skill with Android = None / Skill with Wi-Fi = None

    Hi know-vo,
    I'm sorry that you couldn't find LETools. I've cheked with internal team and was told that actually we do have the software, but it's called "Synchronization Software". Did you try that?
    If you browse to ADB Driver page by clicking "Learn More" in support site, there is a note indicating that this ADB driver works with Synchronization Software.
    Sorry for all the inconvenience caused and. I hope this info above helps.
    Cheers,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

    Since updating to OSX Mavericks (10.9) My  USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
    It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
    This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
    My USB 2.0 card reader saved my life this time. It works totally fine.
    Is this a known problem? Are you guys working on it?

    Solved in this post here:
    https://discussions.apple.com/message/24016337#24016337

Maybe you are looking for