USB 2.0 Problem with KT4 Ultra-SR

I Have Windows XP + SP1 + Via usb 2.0 patch and i still get a message telling me that I Have a high speed USB Device plugged in a non-high speed usb port when I plug USB 2.0 Stuff (such as a nomad jukebox 2 or an external ADS drive kit)
Anyone has an idea ?
Thanks

I solved the same problem by uninstalling All USB controllers, and letting Windows XP finding and installing
them again.- Before this, the  2.0 USB Root Hub didn´t exist under the Universal Serial Bus Controllers; afterwords, it appeard and the external HD was installed in one of it´s ports.- ( ¿ Tutufruti por el postre ? ) Suerte   !

Similar Messages

  • Problem with KT4 Ultra and XP 2700

    First excuse my bad english (i'm from Germany)!!
    I have a heavy problem with my KT4 Ultra.
    First my system:
    AMD Athlon XP 2700
    Mainboard: MSI KT4 Ultra (MS-6590) Bios vers. 1.1
    MSI Geforce 4 Ti 4200 64 Mb
    512 Mb DDR Ram Apacer Technology 512 MB 16x(32mx8)DDR-SDRAM PC2700U-2533-700(CL2.5 upto 167MHz)(CL2 upto 133MHz
    Sound : Onboard
    GlobalWIN CAK38 II Kupfer
    Powersupply: Levicom 420W
    Win XP SP1
    Now the problen:
    When i turn the FSB in the Bios up to 166MHz
    the system crashes on Windows startupscreen!!
    I've turned the FSP clock down to 164 MHz and Windows starts.But when i runned 3DMark2001 it crashes back to desktop !!
    Then i turned the FSB clock down to 159 MHz and the system runns stabile!!
    Now what i've already tried:
    Turned down Ram timings and frequency (same prob.)
    No heatproblem (CPU at 118.f)
    Had the same system exapt an XP1800 instead an XP2700 and no problems!!
    Called the MSI hotline (Germany) and they told me to type the FSB manually in the Bios (insted of numblock +and -).  ?(
    Still the same problem !!  ;(  
    Has anyone the same problem as i ???
    THX !!

    Hi,
    I would try other ram....
    Or start from BIOS default settings and only change CPU-FSB....
    See what happens...

  • Serious problems with KT4 Ultra

    Hi,
    I am having very serious issues with my KT4 Ultra board.  Before I go any further here are the specs:
    KT4 Ultra w/ AMD Athlon XP 2100+ (not overclocked)
    512 MB PC3200 RAM
    BIOS V. 1.4
    40 Gig HDD ATA 100
    ATi Radeon 64 DDR Vivo
    PC Alert 4 Temps:
    System: 38*C
    CPU: 41*C
    Apparently everything is within normal specs.  However, when I go to play a game like Half-Life my computer often spontaneously reboots itself.  I have tried changing/upgrading drivers for almost everything.  
    Another problem is my onboard sound.  It as of late now plays everything in a distorted way.  Drivers that I have tried to download for it come up with the message "VIA AC`97 NOT FOUND" Essentially the drivers from VIA dont even think my sound is there (oh but it is.)  I had to settle with windows update for this as nothing I can find on this website works.  Last but not least, sometimes when I am browsing the web or doing almost nothing, maybe chatting on IM or something, my comp freezes solid.  Nothing will work except the reset button.  These problems have just lately come about and they are very frustrating.  Any reply would be greatly appreciated.

    Read my page on lock-ups and reboots as this can be many things.

  • Can I use DDR Hyper X with Kt4 ultra or Kt4a?

    Hi there, Has anyone used Kingston DDR 400 HYPER X (pc 3200)(2 or 3 X 512 Mb) memory with KT4 ultra fisr or KT4A?
    Can I use 2 or 3 sitcks of 512 Mb without problems???
    Does this really worth the effort?
    I´m moving from 333 to 400
    will it work????
    ?(  ?(  ?(  ?(  ?(

    I´ve checked for some nforce mobos...but why do they have
    3 sockets for ddr memory???, if I´m only going to use 2 of them why do they bring 3....????
    Is better the performance with 1 GB (2 X 512) than with 1.5 Gb (3 X 512)????????????? ?(  ?(  ?(  ?(  ?(  ?(
    Isn´t better to have 1.5 Gb than 1 Gb of memory...and if so, why????
    Does this thing has relation with twin bank architechture????
    Quote
    Originally posted by mvbozkurt
    Yes you can but there is a small problem that you cant use 3 of those guys, only two. Why dont you just buy a nForce board and enjoy your Kingston mems as they meant to be run (:D Nvidia isnt it)....(is what I am thinking of course)

  • Help with KT4 Ultra and 5.1 surround

    Hi there
    Ok I am new to this PC building game and have to be honest I don't know all the technical jargon so if anyone can help, please speak in good old common English, I is a bit slow on the uptake.
    The problem:
    I have built a PC for the old man using the KT4 Ultra MS-6590 motherboard. It came with a two additional brackets, a blue tooth USB thingy, a 5.1 bracket and MSIDVD5.1ch DVD. Both brackets take up a PCI space but plug direct into the motherboard not the pci slot (you probably already know this).
    Now i haven't installed these as I was unsure how to use them. The 5.1 adapter/bracket only has a two speaker jacks, and these run two types of speakers (which ones I can't remember right now). So if I was to pug it in, where do all the other speakers plug in to the system and am I supposed to buy a set of 5.1 speakers that are especially designed to use this type of jack configuration? Any recommendations on speaker packages are very welcome. I also take it that the DVD that came with it will help me set everything up yeh? I haven't tried it as I didn't install the bracket.
    Ok next up, this Bluetooth bracket thing? So what's that all about? If I plug it in, will it give me bluetooth support or do I need to buy something else to make that work? Personally I would be surprised if I plugged it in and it worked.
    Now if you are wondering what brackets I am talking about, you can see them here on the MSI site under the Socket A motherboard section, there are images right at the bottom.
    Cheers for any help you can give, like I say, I am new to all this and I guess we all have to learn somewhere right? So please go easy on me.  
    Cheers Jordy

    Cheers for that,
    I read the KT4 unofficial Fact and got a little confused with what it was saying about bluetooth. I take it that it is in fact not bluetooth and just two extra USB ports? I could be wrong, like I say I get confused with all this techno babble.
    Ok so when I installed the drivers and everything else for the motherboard, was c-media mixer installed with it, or is it on the MSIDVD5.1ch DVD?
    That seem's easy enough to follow though cheers.  
    do you recommend any particualar speaker systems to make connection simple and easy? If you think I am dim, you should see the old man navigate the net (crap he is bound to read this).
    Cheers for your help and anymore light you can shed on the bluetooth bracket.
    Cheers again Jordy  8)

  • Problem with K9N Ultra and Windows 7!!

    Hello,
    I have the following system:
    - K9N Ultra (MS7250 - Version:2.0)
    - AMD Athlon 64 3500+
    - 4x Kingston KVR533D2N4/512
    - NVIDIA GForce 7300GS
    - Seagate Baracuda: ST3120827AS (7200rpm)
    - NEC DVDRW ND4571A
    I am running Windows XP SP3 but when I try to install Windows 7 (either 32 or 64 bit versions), when the system boots up, I choose to run from CD/DVD, the files are being loaded in the beginning but then the system is stuck in the next screen where it says Starting Windows with the green bar. I have left it for up to 90 minutes and it remains there, no change. I have tried with several different disks, always the same. I tried disabling legacy USB drivers, disabling on board audio, disabling USB and having a normal keyboard and mouse, always the same, no change whatsoever, the system halts at the same point every time.
    Can someone please offer some help?

    i tried once more, again disabling onboard audio, legacy, floppy, everything.....same thing, when the files are loaded and the screen goes at the green bar, the DVD spins down and halts there for ever.
    i am really pissed with this problem. i have installed windows 7 in all of my computers and this is the only one that absolutely refuses for windows 7 to be installed! 
    hmm..what do you mean about the PSU? why would the installation of 7 have a problem with the PSU? 2 days ago i installed again windpws xp sp3 (just to see if they would install in contrast to 7) without a problem. i am really tired of changing keyboards, DVDs, taking RAM in and out etc to it...i could live without the need to take a PSU out of another pc and install it to that one, is there some BIOS fix for the problem you mention?
    the bios is version 3.00 from what i read.
    also..what is nvidia boot agent that is the fourth option of boot in my bios??

  • BG2 probs with KT4 Ultra

    Hello,
    While installing Baldur's Gate 2 on my system, I get the following error:
    "CRC Error: the file xxxxxxxx.xxx does not match the file in the Setup's .cab file. The medium you are installing from may be defective. Please contact your software vendor."
    Underneath I get a prompt with "Abort", "Retry" and "Ignore" buttons. This error appears at several points during the installation process and in reference to several files.
    I am running a dual-boot configuration with XP and 98. Under XP, pressing "Retry" makes the hard disk LED light up for a few seconds before displaying the error again. Pressing "Ignore" makes installation continue, until at some point (not always the same) the system reboots itself. Under 98 pressing retry sometimes allows the installation to continue, however it still stops and displays the error message again when it gets to the next problematic file.
    I have ruled out the likelyhood that my installation disks are indeed corrupted by trying to install the game on a friend's computer right after the first time I got the error, and it worked fine. I have also installed the game on both of the two different computers I used over the summer (one was running XP, the other 98, both worked fine). I have tried with both the originals and the backup disks and I get the problem both times. Also, the game used to work on my current computer as well, until a severe crash forced me to reinstall Windows. When the error occured, I assumed it was due to a faulty OS installation and therefore reformated and reinstalled Windows yet again, and it still happened!
    I'm running an Athlon XP 1700+ (not oc'ed) on an MSI KT4-Ultra motherboard, with 256MB RAM and a Radeon 9000. Windows XP has all the latest updates and all the latest hardware drivers installed, 98 has all the latest hardware drivers but no updates. Micro$oft's knowledgebase claims that the problem is caused by a third-party device driver, and I tend to believe it, as the same game installed from the same disks worked fine on the three other computers I installed it on, as well as on mine the first time round. The only thing in which my current configuration differs from my previous configuration and the configuration I'm running on now is that the first time I installed WIndows on this computer I was NOT using all the very latest drivers as I hadn't been connected to the net yet. Therefore, if it really is a driver, my guess is it would be MSI's motherboard driver.
    My issues are:
    why does this happen?
    how do I determine whether it is MSI's driver causing it?
    what does this CRC error message thing mean?
    Can anyone help?
    Thanks,
    Michael

    Do an EXACT search (quoted) of the error at google - sometimes that pulls up the result (had for me MANY times with install issues)

  • The Final Episode with KT4 Ultra

    Yesterday my KT4 Ultra had its last moments. A circuit near system fan connector blew up with fire and smoke. There was no overclocking, properly installed CPU, the latest BIOS was installed and the latest drivers etc. Nothing special...
    It is time for conclusion:
    - random reboots with 133 MHz FSB
    - MemTest showing different results in all 3 memory slots
    - CoolerXP crashes WinXP
    - burnt circuit
    = unfinished product. MSI has rushed getting this MB to markets without proper testing and finetuning.
    When I get a new MB from RMA I will change it to another brand.
    ThankYou all for your help and advices!
    Bye!
    MuzaK
    AMD Athlon XP 2400+ + Zalman CNPS6000-AlCu
    MSI KT4 Ultra FISR + Zalman ZM-NB32
    Samsung 512MB 400MHz
    Maxtor 34098H4 40GB X2
    Hercules Prophet III Geforce 3 Ti500 + Zalman ZM80A-HP
    SB Live! Value 1024 + kX Project drivers
    Pioneer 104F DVD
    HP 9300i CD-RW
    Nec FD 1.44"
    Enermax EG365AX-VE(G)FMA 350W
    WinXP + SP1

    Yes I seem to be having problems with the MSI KT4 Ultra board also (Model# MS-6590). I just got off the phone with MSI Technical Support and as we tried to troubleshoot, we realized the board was shipped with the CMOS jumper on pins 2-3. He explained that powering the board ON while in this setting would cause board damage. Well, then why would they ship it like this!!!!!!!!!! Slightly irritated.
    My specs are:
        AMD 2000+
        (1) DDR 400 (PC3200 512mb)
        GeForce4 Ti4200 128mb 8x AGP
    I tried the CMOS jumper on pins 1-2, where they should be for normal 'posting' and when I hit the power on button I get NOTHING. What do you guys think? Board is damaged?
      WJ

  • Is FSB overclocking above 175 MHz possible with KT4 Ultra?

    I would like to squeeze a few extra MHz out of my AMD XP2600+ (without unlocking or other hardmods that cost money if they fail...). I have upped the FSB to 175 successfully, which gives me just above 2200 MHz CPU speed as reported of Motherboard Monitor. But when I go above that, it crashes. Upping the voltage from auto (1.65 on my system) does not seem to help. A guy on an overclocking board suggested that it's because it stops in the AGP/PCI slot since there is no lock of those speeds. Is this possible in any way, or are there any other dirty tricks to use so I can get more speed out of this?
    Thanks a lot in advance!

    thanks!!!yes, it really seems to be a power source issue...
    i am using a powerline 450W power source, and the smart doctor utility form asus reported a reading of red marked warning 3.12 volts intead of 3.3 volts, also i tested the 3.3 rails using a multimeter while the system was on and capture drivers under conflict and it reported a 3.25 voltage.....i opened the power source's box and clean its dust, and so, the problem is not happening anymore!!.anyway smart doctors is reporting a 3.15 voltage instead of 3.3 (not in red or under warning message)and the multimeter is reporting 3.27. but everything is working fine: capture and tv out fetures while using the processor as an athlon 2800+ for the first time since i bought the motherboard........
    the 5 volts line is reported by the multimeter with 4.95 volts after and before the problem was happening, same with smart doctor.
    the hardware i used was:
    -two MSI kt4 ultra boards
    -kt4A
    -an intel motherboard which i don't remember its brand, using dimm pc 133 memory(using anoter power supply)
    -asus v8460 for all boards
    -same ddr memory for all msi motherboards
    since the voltage is still not 3.3 volts reported, even if the entire video card is working fine, and i only cleaned the box, and didn't change anything to its structure, maybe the problem could happen again, i guess i should buy another power source then.
    i am very thankful
    Andres.
    PD: i see that a lot of people is having this kind of problem through the forum and maybe its due to this voltage stuff too....maybe it'd be a good idea if a sticky thread  is posted repoting this stuff i believe. (if it hasn't yet of course)

  • No Sound with KT4 Ultra - FISR -- HELP!

    hey
    I got a KT4 Ultra - FISR along with and XP 2400 and other goodies for christmas. I put the machine together and installed 98se, and all of the included drivers the came on the MSI Utilities disk. Everything was working perfectly with it (got 11752 on 3dmark 2001, is that a decent score?) anyways everything was cool except the on-board c-media sound was not working at all.  ?(  I have 2 speakers w/ sub and i have them plugged into the line out spot in the mobo. I have turned the sound on in my BIOS and messed with all the sound settings in windows and still i get no sound at all. I even unplugged the bracket that came with it for surround because i saw it could possibly cause some problems. I then checked all my connections and still no sound.  X( I was woundering if there are any other settings or jumpers that i need to set for my sound to work. Any additional information on how to get my sound to work would be greately appreciated. My system specs are below. Thankz  
    MSI KT4 Ultra-FISR
    AMD XP 2400+
    MSI GF4 TI 4400
    256 MB GeIL PC2700
    120 GB Maxtor ATA/133
    ASUS 48/16/48 CD-RW
    Pioneer 16x DVD
    Hyperion 4in1
    Win 98se

    bump

  • Problem with KT4 and 200Gb Drive or is it?

     :(
    Help!
    Hi, I just got this board KT4 Ultra and am having a problem, not sure what it's related to though
    The MB picks up the new drive I bought (Maxtor IDE ATA-133 200Gb 7200RPM 8Mb Cache DiamondMax Plus9) fine no problem, but when I come to install WinXP it constantly tells me that it's a 130Gb drive?!?!?!
    Anyone, any ideas?
    Thanx
    Vev

    Here is something similar to the issue you are having.
    I seen it on the Maxtor site.
    http://maxtor.custhelp.com/cgi-bin/maxtor.cfg/php/enduser/std_adp.php?p_sid=g5PzHxCg&p_lva=960&p_faqid=960&p_created=1016214655&p_sp=cF9zcmNoPTEmcF9ncmlkc29ydD0mcF9yb3dfY250PTc2JnBfc2VhcmNoX3RleHQ9JnBfc2VhcmNoX3R5cGU9MyZwX3Byb2RfbHZsMT0zMyZwX3Byb2RfbHZsMj00NCZwX2NhdF9sdmwxPTImcF9jYXRfbHZsMj1_YW55fiZwX3BhZ2U9MQ**&p_li=

  • USB 3.0 Problem with WD MyPassport 1TB USB 3.0

    Hello all,
    I have a Problem with my USB 3.0 Ports. I had an USB 2.0 external Harddrive which i used on my MacBook Pro 13" Mid 2012, but i needed a new one, so i bought a Western Digital MyPassport 1TB with USB 3.0. I also installed Tuxera NTFS because i bought the WD MyPassport in NTFS due to the fact that i use it on Mac aswell as on Windows. Now i read on the Apple Support page this:
    How do I get the best performance from the USB 3 ports?
    The first device you plug in will configure the port, so always connect USB 3 capable hubs or devices first.
    What happens if I plug in a USB 2 device into the USB 3 port first?
    If you plug in a USB 2 hub first, all devices connected or "daisy-chained" to that hub will operate up to the maximum transfer rate of USB 2 speed (480 Mbps).
    I get now with my USB 3.0 MyPassport just write and read speed of an USB 2.0 device. (write/read +-35MB/s). I already tried my MyPassport on an Windows 8 PC with USB 3.0 Ports and there i get 85 MB/s read and 65 MB/s write. What is a huge diffrence.
    I already tried to reset the USB 3.0 Ports with "Command-Option-P-R", but this also didn't solve the problem.
    A friend of mine gets the same problem with an older version of the MyPassport (500GB) but also USB 3.0.
    Does anyone has another idea what i could try to get USB 3.0 Speed on my Macbook Pro?
    PS. I also installed the WD Turbo Drivers for Mac
    PPS: I tested the Write and Read speed on my mac with xBench, Aja System Test and Blackmagic Disk Speed Test. All three gave nearly the same speed.

    Diabolusz wrote:
    Thanks for the answer, very appreciated.
    Well sometimes i got 30 MB/s and sometimes 60 MB/s. I don't know what's happening there. Running the Blackmagic Disk Speed Test shows 60 MB/s, 2 minutes later it shows 30 MB/s ... But my Mac identifys the external Harddrive as USB 3.0 device ("up to 5 Gbit/s")...
    ...I bought it on Amazon, and i also read the review there, and nearly everybody is talking of speeds between 85 and 110 MB/s. So i would say that those 60 MB/s are not normal....
    To your link: I got exactly that external HDD, just with 1TB. Thank you, i'll read the article
    When you check out the article, look at the transfer rates as the file sizes get smaller.
    My Mac Pro doesn't have built in USB 3.0 support but I've added a PCIe card and now it does. Using Carbon Copy Cloner to clone a drive to an external USB 3.0 WD MyBook, which has a 3.5" HD inside, I can watch what files are being transferred in CCC while I watch the transfer rate using the Disk Activity graph in Disk Utility. If I'm writing to the beginning of the disk, the files can fly by at close to 130 MB/sec if they're large and maybe 15 MB/sec if a bunch of them are very small. If they're going, instead, to the last partition on the MyBook, which is at the center of the drive, the transfer rate might be cut almost in half. I've tried something similar with a Seagate GoFlex external, and in addition to what I observed with the MyBook, I also found that when the GoFlex started to overheat (a common occurrence since it contained a Barracuda XT with no ventilation), the transfer rate dropped like a rock. I can't tell from the pictures if your MyPassport has any ventilation but that could be an issue too and might explain your finding with the Blackmagic Disk Speed Test (assuming that test doesn't intentionally change file size during the test).
    In any case, while the USB 3.0 interface can theoretically deliver up to 5 Gbit/s transfer rate, there's no hard disk out there which can run that fast, although some SSD's might. And that applies to both the HD in the MyPassport and the HD in your Mac. Indeed, unless you've got an SSD in your MacBook Pro, it's a 5400 RPM HD, so even though the interface it's connected to is 6.0 Gbps SATA, the HD can't begin to saturate it.
    Considering all the variables at work, the real answer may be "you can't get there from here."

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • I am having USB not recognized problems with my HP Pavilion HPE450.

    Hi all, problems with my external disk (and other USB devices) going unrecognizable if the computer goes to sleep.  When I wake it the USB device is no longer recognized.  It also would happen if the disk would spin down.  I set the disk to never spin down, but I can't keep the computer awake all the time too.
    I read about a similar problem happening with the nvidia chipset but this is an Intel chipset, I checked for this product.
    1. HP Pavilion HPE450 desktop
    2. Win 7 64 bit
    3. Device not recognized
    4. I was having this error soon after getting this computer.  Then the SSD crashed and the store reinstalled everything, they used a generic Win build instead of the HP recovery disk due to the SSD.  But the error is similar, USB devices going offline at random.
    Any help with this appreciated because I cannot perform backups when my disk keeps going offline.

    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Serios problem with k9n ultra-2f please help soon

    hi
    i got new mobo (k9n ultra-2f) but i have so problem with it
    1- i can't install winxp on every sata hard drive (i got floppy sata driver and f6 ...)
    2- when install windows on ide hard it is slow
    3- i use music production software and i got noise and glitch in wave sound recorded
    4- when writing sound files on cd or dvd so it is come with noise and glitch too
    5 - i install win on ide hard and i use sata hard drive for second hard storage but I CAN'T FORMAT PARTITION ON THIS DRIVE(SATA)!!!!
    6 - i am crying
    cpu 5200 athlon 64 . ram 2*1gig corsair duall chanel 667mhz . vga asus geforce 6200 ...
    please please please help

    Quote from: Fredrik Åsenius on 05-April-08, 06:57:44
    Please answer Doctor Stu's question.
    @Fredrik Åsenius you are talking to different person, topic starter didn't reply yet

Maybe you are looking for