USB 2.0 problems with Windows XP SP2

Device manager>Universal serial bus controller>Standart enhanced PCI to USB host controller
                                                               >Standart OpenHCD USB host controller
The point is my usb device is placed in the second/openHCD/ controller and the very device is USB 2.0 compatible, but this controller is USB 1.1
The first controller/enhanced PCI to USB/ reports that all 10 USB ports are unused
How do I make my USB ports work as USB 2.0?
I do not have such option in BIOS if that's your point and I'm using WINDOWS XP SP2
Winchester 3500+
Neo4 Platinum
Enermax 465W 2x12V rails, each 18A
Corsair CMX-3200XLPRO 2x512MB
NEC 3520a
2xWD74GB raptors in RAID 0
1xHitachi 120GB
X850XT Graphics 256MB

Quote from: bassmadrigal on 23-July-05, 17:37:35
I am not sure I completely understand your question but I will take stab at it.
First off if you have any additional cards that are USB 1.1 they will not function as USB 2.0. It is a hardware change not software. (Not sure if this applies but figured I would throw it out)
One common thing with USB to get working properly is to remove all instances in device manager and reboot and have windows reinstall the drivers (it would be a lot nicer if bill came out with a better operating system, but you take what you can get )
Do any USB ports function as 2.0?
Good Luck
Jeremy
No all of them are USB 1.10

Similar Messages

  • USB Flash Memory Problem with Windows printing...need advice

    I recently traveled from the US to the UK with my G4 12" powerbook. In order to print a document (MS PowerPoint), I had to copy the document to my flash memory stick (AVB is the brand which I bought because it's skinny enough to also allow me to use a mouse), put it into a Windows machine's USB port in the hotel business center, and then print from that file.
    I had all kinds of problems, where the file would disappear from the memory stick, (and in one heart-stopping moment, from my PB desktop!). I finally borrowed another stick and got the job done, but I don't want to go through that again.
    Amy idea as to what happened, or more to the point: What is the "best" brand/type of memory stick to go between Macs (I'm on Tiger)...and Windows? (I only need a 256M capacity; I have small files, but don't mind going bigger if it's more reliable).
    Or should I give up on a stick and buy a USB portable hard drive? Or is there some other, better, more reliable solution?
    Any suggestions would be very much appreciated.
    Thanks, Writerdog

    I think you're right it sounds like an electrical sound
    if you want to change the motherboard like sea dog said look at the MSI catalog to find the one that suits you the most >>HERE<<
    personnally I don't know the prices ine Danemark (I buy everything in France) so if you have a link i can try to help,
    if it was up to me would take the Z77A-G45-Gaming or GD65-Gaming but if you prefer the normal series i would say GD-55 or GD65 it depends on the prices
    PS: for ethical matters i can't speak about other companies in the MSI Forum

  • Problems with Windows 7 home premium and ovi

    Excuse me for my english.
    I've a big problem with Windows 7 and NOKIA N97 32G
    I install the latest version of Nokia Ovi Suite 2.0.2.42. When I connect the phone with USB and select PC suite mode in the phone, OVI don't see the phone and say method not compatible.
    I can't synchronize the phone.
    Help me.
    Thanks

    I just want to say that many Nokia Ovi Suite problems have showed up for me recently. I tried everything (including many reinstalls, cleans, etc.) and nothing helped.
    Finally I found the solution:
    I realized that I have installed Service Pack 1 on Windows 7 (32-bit), and this stopped Ovi Suite from working correctly. The solution is to run Ovi Suite in compatibility mode as "Windows 7"
    (You may be surprised to run an application in "Windows 7" compatibility mode on Windows 7. But after installing Service Pack, it is no longer "Windows 7" but it is now "Windows 7 SP1"! This is different. So "Windows 7" is the old mode without the service pack, and in this old mode Ovi Suite works.)
    Concluding: After installing Service Pack 1 just use compatibility mode as "Windows 7" to run Ovi Suite, and this program should work OK (at least for me it works on a 32-bit OS).
    PS. My version of Ovi Suite is 3.0.0.290

  • Compliance of Oracle 10g R2 with Windows XP SP2

    Hello everybody
    I am representing my company for making a decision of deploying appropriate versions for Oracle and Windows.
    The vendor suggested Oracle 9 on Windows Server 2003, whereas we opted for deploying Oracle 10g R2 with Windows XP SP2.
    According to the vendor
    XP is not a true 'server' product and therefore does not provide many server functions and may have restrictions on numbers of users that can connect.
    If the vendor's notion is correct, would anyone explain the limitations/restrictions of our solution.

    One of the first problems that you will encounter, inbound connections limit in Windows XP:
    http://support.microsoft.com/kb/314882
    Memory allocations are handled differently between Windows 2003 and XP (paged pool, non-paged pool, file system caching, etc.):
    http://msdn2.microsoft.com/en-us/library/aa366778.aspx
    In some cases the memory allocation differences can cause XP to display errors indicating "unable to allocate memory from the paged pool" or the non-paged pool, when Windows 2003 would otherwise continue functioning without problem. Windows 2003 offers a registry change to work around this problem:
    http://support.microsoft.com/kb/312362
    Microsoft will stop making Windows XP available for resale in June 2008, except on extremely light-weight computers, and update support will end before update support ends for Windows 2003.
    There are typically differences in the hardware that ships with a computer loaded with Windows XP and one that ships with Windows 2003. You will have a hard time finding a computer with Windows XP that ships with redundant power supplies, dual backplanes, SCSI RAID 10 support, dual network interfaces, built-in system/diagnostics, etc.
    While Windows 2003 is the server equivalent of Windows XP, there are many features in Windows 2003 that are not available in Windows XP. XP is designed to be rebooted frequently (shut down every night, or reboot once a week or once a month) and is geared toward foreground application performance. Windows Server 2003 is designed to be rebooted infrequently (apply security updates, recover from rare system fatal bugs) and is geared toward providing good background application performance (the Oracle database instance would be a background application).
    If you are unfamilar with Windows Server 2003, take a look at the books "Microsoft Windows Server 2003 Administrator's Companion" by Microsoft Press and "Mastering Windows Server 2003" by Sybex. Compare what you find in those books with what you might find in Microsoft's Windows XP Resource Kit book.
    Charles Hooper
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Thinkpad X300 with windows xp sp2 gets blue screen after standby.

    We have a Thinkpad X300 (with windows xp sp2) gets blue screen after standby. I mean after you close the lid then open it. Anyone has see this kind of behave before?
    Thanks,

    I have found the solution to this problem - hope you are still watching the thread.
    Express install in parallels seems to be the culprit. Do a custom install instead and set your own virtual hard disk size. I set mine to 12 Gb (12000 Mb)and made it a fixed size instead of "growing" or whatever the heck parallels calls it. I also chose shared network instead of "bridged" (I read that someone else had identified this as part of the problem).
    After making those changes it worked like a charm.

  • IPhone 3GS SYnc problems with Windows 7 64 Bit

    I am having sync problems with windows 7 64 Bit.
    The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
    Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
    iPhone and iTunes are latest versions.
    Thanks
    Joe

    "Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
    Ok here's what I did:
    1) Connect the iPhone (iTunes had been installed)
    2) No MTP driver installation is happening as Windows detects iPhone successfully
    3) Open Device Manager
    4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
    One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
    - C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
    - C:\Windows\system32\DRIVERS\winusb.sys
    - C:\Windows\system32\DRIVERS\WUDFRd.sys
    - C:\Windows\system32\WpdMtp.dll
    - C:\Windows\system32\WpdMtpUS.dll
    The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
    - C:\Windows\system32\Drivers\usbaapl64.sys
    - C:\Windows\system32\usbaaplrc.dll

  • Problem with windows and my monitor in after effects

    HI . before any thing excuse me for speeking english.
    i have a problem with windows in after effect in my monitor
    my monitor is 15.6 and resolution is 1366*768
    for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
    Thanks.

    Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
    Mylenium

  • Hi anyone having a problem with windows 7 and itunes

    Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

    Yes, I am also having trouble with my windows 7n.  I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

  • Problems with Windows XP SP3 in Boot Camp

    Hi,
    I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
    Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
    Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

    Problems with Windows XP SP3 in Boot Camp
    Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

  • I am having a problem with Windows Fusion installed on a MacBook.

    I am having a problem with Windows Fusion installed on a MacBook OS 10.  When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
    I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
    I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
    Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
    Any help would be greatly appreciated.
    Thank you very much.

    HartEJ wrote:
    ...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
    If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
    If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
    http://www.apple.com/itunes/
    If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
    If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
    1. Open the control panel
    2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
    3. Navigate to "Apple Software Update" in the list and click on it
    4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
    Once you repair this, try running iTunes and the update again.
    Fingers crossed!

  • Problem with Windows Media Player since installing Firefox 4.0

    Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

    What can I do to get the Windows Media Player to work properly?

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Maybe you are looking for