USB 2.0 V.92 Modem won't connect - ThinkCentre M93p

I'm trying to get a V.92 modem to connect to a remote host.  The modem connects, but never binds with the host.
I'm using a ThinkCentre M93p with all the latest Lenovo updates.  The OS is Win7 Pro 64-bit.  The modem is a StarTech External V.92 56K USB Data/Fax Modem (USB56KEM3).
The modem and HyperAccess software work correctly in other PC's running Win7 Pro 64-bit. in both USB 2.0 and 3.0 ports.
Any suggestions would be greatly appreciated.

Hi emeraldcleopatra,
Why not mimic the settings you have for your 12" iBook that connects, trying the same for the one that doesn't and checking each setting that you have played around with.
See if that works.
regards roam

Similar Messages

  • N82 bluetooth modem won't connect

    I get the error "Failed to connect to the internet. One touch access could not connect to the selected device."
    I have bluetooth modem selected, am connected via bluetooth & can do everything else. It works using USB cable but not bluetooth which would be much handier for me.
    I'm using XP & PC Suite 7.0.8.2
    Nokia N8 on Belle

    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. How far do you get?

  • "USB Device Not Recognized" Bubble/ Ipod won't connect to Windows

    Whenever i connect my ipod to my computer the ipod goes to "do not disconnect" and a bubble pops up on my computer saying "USB DEvice Not Recognized" i have switched it to all of my usb ports and unplugged all usbs except for my mouse at the same time. this happens 95% of the time. my ipod does charge while connected and it has only connected to itunes once in the past 2 weeks. im not sure if it is itunes because it started around the time i updated to itunes 7. since it is a windows bubble though i think it is a windows or ipod problem and not itunes. i have a dell that isnt great but works fine.
    thanks for any help.
    ... Go TTU!

    Make that two idiots. My roommate got a Sansa and I decided to try out the cable. Nothing happened. Now suddenly my nano isn't recognized by my computer. I'm glad I read your post, now I can stop looking high and low for a solution. Until this happened it worked good as new.

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • 5th gen ipod won't connect to usb 3, is there a fix?

    I have an ipod video (5th gen), and it won't connect to my new asus laptop since it only has usb 3 ports (I don't care if it will charge or not, I have a dock), my question is whether it could potentially connect to my computer so I could sync it if I use a usb 2 hub or something similar. My ipod recently formatted itself when it forced a reset, so I have to get my music all back. Anyone know a fix to it? Thanks for any help you guys can give me, really driving me crazy not having music to listen to when I'm out...

    You did install the latest version of iTunes on your new computer, correct?  Installing iTunes is how the software needed for iPods to be recognized as iPod gets installed.  Otherwise, Windows sees it as a generic device.
    https://www.apple.com/itunes/
    If the iPod is recognized by Windows, but not iTunes, you should go through this trouble-shooting document.
    iPod: Appears in Windows but not in iTunes - Apple Support
    FYI - My 3rd gen iPod from 2003 works fine with the latest iTunes; there's no such thing as an iPod that is too old. 

  • I dropped my ipod touch 3 generation into some water.  Now it shows me the itunes logo and the usb cord picture.  I restored my ipod, and now it won't connect to itunes or my computer. What should I do?

    I dropped my ipod touch 3 generation into some water.  I let it dry off completely befor turning it back on.  Now it shows me the itunes logo and the usb cord picture.  I restored my ipod, and now it won't connect to itunes or my computer. What should I do?

    Hey
    Does it charge when connected, if not you may have broken it..
    You can always try an apple Genius at an Apple Store,
    Jason

  • HT2497 Using Time Machine for home wifi just fine. Switched to cable modem from DSL.  Now having trouble connecting laptops to wifi. ISP says it is not their fault. Mac books won't connect on their own.

    Changed from DSL to cable modem. Now Mac book pro won't connect to wifi - Time Machine?
    One Mac ok, other not. Help?

    Thanks. We have been using an existing Time Machine for wifi.  Cable modem replaced DSL router and was hooked up to Time Machine. What's odd is that 3 computers and iPad2 are connecting to home wifi just fine, using exact same network and password as before. My Mac book pro and an older iPad are not. IPhones are also connecting to home wifi just fine. I managed to get my Mac book pro hooked one time by copying ip address from a Mac that was working (entered manually) then turning that one off. That's not what I need.
    The error message is "no ip address".

  • Updated OS X Mavericks and now USB ports and MS Office apps won't work. How do I fix this?

    I updated  my MacBook Pro (mid 2012) to OS X Mavericks 10.9.4 and now my USB ports and MS Office apps won't work.  What do I do to fix this?

    What system version were you running before you updated to 10.9.4? Another 10.9.x or something earlier?
    What version of Office? 2004, 2008, or 2011?
    Were you aware that Office 2004 does not run on recent versions of the system?
    When you say your USB ports do not work, on what are you determining that?
    Were you aware that Mavericks does not display external disk volumes by default?

  • E65 won't connect via USB Cable

    Hello to you all...
    I just got my new Nokia E65 and I couldn't be happier with it. Fantastic phone.
    However I can't connect it to my PC (Windows XP SP2) via the USB Cable...it just won't recognize it. I installed PC Suite with the latest cable drivers and nothing happens. When I connect the cable to the phone it asks if I want to use "data transfer" or "pc Suite" mode, but neither of them work.
    I'm able to connect to PC Suite via infrared, and that works fine. But I want to update my firmware and software updater only works via usb cable.
    Any ideas on what to to?

    more info needed, suite version, cable type, what is visible in pc device manager when you connect phone, what is visible in phone screen when you connct cable, etc.

  • V570 Won't Connect Unless in Same Room as Modem

    My Lenovo V570 will not connect to a newtork unless it is super close to the Modem.  Like the same room.  I move to my bedroom, and it won't connect.  I went to a hotel this weekend, and it would not connect to the Hotel's network.  My friend had a laptop in the hotel and had no problems.  Why is my connecting ability so limited?  Do I need some type of booster, or  more powerful network card?  It came with an Intel MyWifi Card.  (Not sure how to find the details of the WiFi card)
    This is starting to get to the point of frustrating.

    if it's antenna issue, i think there's nothing you can do. still, check if other computers/wireless devices can connect to the internet.
    ( my opinion it's antenna issue )

  • Why is Windows 8.1 causing my Verizon Mobile Broadband USB Pantech modem to auto connect/

    Why is Windows 8.1 causing my Verizon Mobile Broadband USB Pantech modem to auto connect? If I turn it off in Windows Settings I can not get service. As I am on a 5 GB plan I do not want my internet running at all times nor do I want o have to disconnect from the internet every time I turn my computer on.

        mebpapa,
    Hmm. That is a bit conflicting. After all, we don't want you to have to worry about usage running up or having to get disconnected each time you get on the computer. Ultimately, this is a software functionality of Windows 8.1 however. Have you noticed a high increase of usage when the auto connect is left on or are you just taking precautionary measures?
    EvanO_VZW
    Follow us on Twitter @VZWSupport

  • My usb cord won't connect to my macbook air

    Whenever I plug my phone into the USB cord and then into the Macbook Air, it won't connect! The phone vibrates and I can't sync music or photos!
    We replaced the Macbook and this is still happening, then we replaced the USB cord with one that we bought at our local Apple store. '
    Any advice?

    As I said that indicates the cable that you used between the iPod and computer is bad
    jgreen1009 wrote:
    The only way I can charge my ipod now is through my docking station. It is the only device that recognizes my ipod.

  • I just bought a 4th gen 8GB iPod touch ,won't connect to iTunes/iStore I've been told by support that I have to have a WiFi network.  We travel in an RV, never near a WiFi network.I have a USB Telstra mobile b'band dongle. How can  I get iPod to work

    th gen. 8GB iPod Touch.  It won't connect to iStore. Support say it has to have access to a WiFi network. We travel a lot in an RV and rarely have access to WiFi.  I connect the iPod to a laptop which has a Telstra USB mobile broadband  dongle.  I explained this in detail and was told by the sales assistant that the iPod would work on this setup.  It doesn't.  Has anyone got around this problem?

    Go back to the sales assistant and gently place the iPod where...  well, you get the idea.

  • I have a modem and a separate router in a part of my house that gets poor reception from the modem.My iPad won't connect to the auxillary router like my laptop does with ease. How do I get the iPad to connect?

    I have a modem, and a separate (hard wired from modem) router in a part of my house that gets poor reception from the modem.My iPad won't connect to the auxillary router like my laptop does with ease. How do I get the iPad to connect? It does see the router in my wi-fi connections list - just won't connect. !

    This article will provide a troubleshooting framework.
    http://support.apple.com/kb/TS1398

Maybe you are looking for

  • Formula to show non english characters from clob in crystal report

    Hi I am using the database Oracle 11g with a field clob in one of the table that i want to show in the crystal report But the problem is when i put the clob field in crystal report it is outputting the results perfectly for English characters but not

  • Internet sharing seems to conflict with ichat video and theatre

    I don't use a base station. I broadcast wifi from my imac using internet sharing. With this option enabled, ichat 4.0 video and theatre will not work on my machine

  • Query - selection screen out put only

    Hi, I have developed a Query in Sq01, I have to make the selections screen field as grey out with default value, i have done with default value but user can edit it using his own but I want it to be displayed only. please help. regards, Prabhu <REMOV

  • How to set a default reminder for ICal to-dos

    I would love to be able to set a default reminder for all my Event to-do's in ICal.  Right now, I have to choose a reminder, and it's always preset at 11:45 PM.  I don't want my phone to remind me in the middle of the night.

  • XML as result from webService call from JSP

    I have a jsp page, where I will invoke a WebService call, which will return           a big XML object back to me, of which I need to select few key-value pair as           display item in a table only as result.           Any idea how to achieve thi