USB 2 Card not seeing iPod Video
so i bought an usb 2 pci card from techgear. the card works fine with things other than my 30 gb ipod vidoe and 60 gb photo. it can see them and they lock up in the do not disconnect screen. it works fine with my 20 gb 3rd gen.
i have tried to use a powered hub. no luck. i guess i was wondering if anyone has any ideas at all about how to get this to work.
thanks
LiMa,
This is where it is nice to have two drives or a partitioned drive. You can have a clean installation of software on one drive and change settings or update software on another. If the camera stops working, you may have updated to a version of Quicktime that dropped support for the camera. You then reboot to the original hard drive and go back to what works. I believe the install disk took you back in time and that is why some of your quicktime features were lost.
Jim
Similar Messages
-
Can't see ipod videos from 60GB ipod classic. I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play or do I need to get new ipod. It works on my iPad and iPhone, but not through iPod Classic.
Are these music videos located under Videos on your iPod? Do it play other regular movies (if you have any on the device)?
B-rock -
I can't hear the music on my IPOD 60Gig 5th generation and can not see my videos
I can not hear the music, I can not see the videos on my IPOD 5th generation. I have restored it to the original settings and it still does not work.
That's likely an indication or one or more hardware failures of the iPod. You'll want to get the iPod serviced in order to gain full functionality of it again or start saving for a new iPod.
B-rock -
My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.
Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Can not see some videos, Can not install Activex 9.o47
My name is Alex, I have been working on getting flash to play
for about 3 weeks.
I have uninstalled both shockwave and flash many many times
using all different sites. I have turned off my firewall,
anti spy, and antivirus when downloading. I have shut
everything down that was running. I have closed everything.
I have restarted each time between downloads. I have then
downloaded the install from many many sites. Closed everything, and
installed.
I have uninstalled from ADD/Remove. I have reinstalled. Now,
when I go to ADD/Remove programs it shows that both Flash and
Shockwave are there.
Seriously, I have downloaded and uninstalled and installed so
many times from so many sites.
Each time the screen shows I have done it successfully. But I
cannot get it to play. I have turned off all popup blockers that I
know of.
I still run my anti virus, firewall spyware etc. But says
there is nothing to prevent Flash from playing some of the pages I
use to see.
I have done a Reg clean. And I have installed after all that
and still does not work.
I am the admin on the computer and I am the only one who runs
it. I use firefox for my browser but I tried to get it in IE and
still nothing.
Everything was going absolutely fine till I done the stupid
mistake of updating my Flash player,
seen then my computer is going banana, I don't understand why
is that,
I can actually see U tube videos, but I can not see other
videos like trailers from IMDB, <Your browser is blocking
display of our video player. If you would like to see the video,
please turn off any ad-blocking or Flash-blocking software that you
are using>.
That's what he said on the screen where the video suppose to
play, I can only see advertising, It should be the other way
around,
and even the news on yahoo I can not see them, only ads.
I had no problems before, no pop up I could see the videos
absolutely fine and especially no ADS and then that days,
I wish I could cancel that day, I'm try to fix this problems
all ready 3 weeks and nothing, I did try everything but nothing.
I have download flash Player 9.0.47.0 manage to install but
found impossible to install Activex 9.0.47.0 seems to be impossible
I do know why. disinstall everything reinstall but nothing,
# Select Start.
# Select Run.
# Type cmd
# In the command window, type the following:
uninstall_flash_player.exe /clean
The answer is: uninstall_flash_player.exe is not recognised
as an internal or external command,
operable program or batch file.
does not work, try million of time, does not work.
Does anybody know why?You are not the first one to notice..................
http://forums.adobe.com/thread/748720?tstart=0
Please do submit a request for it to be changed www.adobe.com/go/wish -
HT204382 I can not see the video.
Hello, I can not see the video which is crate by windows program
http://www.telestream.net/flip4mac/overview.htm
The free version should be all you need. -
I am not seeing mp4 video player on internet?
I am not seeing mp4 video player on internet?
Try VLC media player it seems to play almost any codec.
https://www.macupdate.com/app/mac/5758/vlc-media-player -
Just purchased student creative cloud to edit video. I do not see a video editing program. is PP o
just purchased student creative cloud to edit video. I do not see a video editing program. is Ptremire pro included? It appearred to be included when I registered?
Yes.
It's 64 bit only software so you need a 64 bit processor and 64 bit operating system to run it.
If you're running Win 7 32 bit or Win8 32 bit then you won't see Premiere Pro in the list of available Cloud apps. Same goes for After Effects and other video related apps.
Refer http://www.adobe.com/products/creativecloud/faq.html
Desktop apps and product updates section - which apps require a 64 bit operating system? -
USB device not recognized - ipod video-help!!
when I connect my ipod video, I get a message "USB device not recognized", when I click, I get: "no drivers installed for this device". I have re-installed the ipod software, reset the ipod and re-installed itunes, just in case. I have been on this problem since Christmas. Any ideas at all, anybody?
dell Windows XPI have this EXACT same problem. And my ports are definitely 2.0 USB. I've uninstalled and installed all the iPod, iTunes and Quicktime components at least 4 times. I've reset the iPod. I've read everything I can get my hands on... nuthin'... nada...
Can anyone help? -
USB port mA required by iPod Video 60Gb
I need to know what is the mA realy needed by a iPOd Video 60Gb.
I make this question because I have a laptop with a USB-2 PCMCIA adapter and if the mA need is not so big I don't need to travel with the power adapter.
Thanks in advance,
Dariusz WI use a usb hub for my 60gb ipod and it won't charge unless I have the power supply hooked up to it. Yours seems like a similar situation.
You could try some experiments while at home to see how your setup reacts. Run your ipod's battery down, hook it up to the card without the power supply, and see if it charges up in a reasonable time. -
Itunes does not see ipod, cannot sync
I actually found the answer, my computer (in my computer) was recognising the ipod as a hard drive device
I went to Control Panel, All Control panel items, Programs & Features.....Right clicked on iTunes.....the selected 'Repair'
Now I can see the Ipod in iTunes and synciOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
Then for iPod operation problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have a large video on my ipad that I need to transfer to my PC (a window 7). I could also use a windows 8 if that would help. But all of the applications I have tried do not see this large video (52 mins) even though they transfer smaller videos fine. The ipad will not let me trim the video, saying it is too large. This is true even though I only want to trim the original, and not create a new video. (Actually it refuses before it gets to the choice of creating something new or just eliminating something from the original). I have been to an Apple store, but the people there only could recommend that I try some alternate applications to do the transfer (Kodak EasyShare). I don't have much faith this will work. I think I have this application on an old PC, and it is not something I want on my new computers.
Is it possibled the size of this video just violates the transfer formats for files over USB? If so, I will just delete the video and move on. But the video is really something I wanted to save. I would be happy to eliminate most of the video, but the ipad will not let me trim it.
I also tried to import the video with Windows Moviemaker (free with W7). It also does not see this file, but works fine on the other videos on the ipad.How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/HT2729
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
Cheers, Tom -
ITunes does not see iPod after last updates
It seems that many people have this same problem, but I do not see any solutions. I recently updated my iTunes to the latest version and did the iPod updaters. Since this, my computer at home and work no longer recognizes my iPod. I keep getting something asking me to restore my iPod, but i have a bunch of pictures on it that I do not have saved anywhere else. Doing a restore will erease everything on my iPod.
please help.
JarynWell, that was annoying.
I just went through the same grief being reported by many other users here: I updated my iTunes on Windows XP, and it stopped recognizing my iPod. (Plugging in the iPod would actually kick off iTunes, but after coming up, iTunes refused to see the iPod.)
It's working again, and it did seem to be related to network drives. However, I wasn't very disciplined about trying a single step, seeing if it worked, then proceeding to the next step, so I can't guarantee which specific step(s) below that actually solved the problem.
But for what it's worth:
1. I recently (a day or two before updating iTunes) mounted a new network drive, assigned to drive "G:". My iPod has been "F:" since I first installed it.
2. When iTunes stopped seeing my iPod after updating, I tried resetting the iPod's drive assignment to "H:".
(Unfortunately, I also tried everything else, including restoring the iPod to factory settings...it's now updating something like 1500 tracks.)
3. Resetting the iPod's drive letter as suggested in another thread didn't seem to do anything by itself, however I ALSO UNMAPPED THE NEWER DRIVE ASSIGNMENT DESCRIBED IN STEP 1.
4. Now here's the other stuff I did before trying it again, which may or may not have contributed to the fix:
- I undocked (it's a laptop)
- I moved the USB cable from the docking station
to one of the laptop ports
- I rebooted
After doing this, I plugged in the iPod, and ALLELUIA BROTHERS AND SISTERS, it was RECOGNIZED ONCE MORE!
Give me an AMEN.
Hope this helps somebody else to get going. -
ITune not seeing iPod in another USDB port
Hi there
I have a 20Gb iPod, and my wife has a nano. She has a nano dock in one port on the PC, and she has her own library in her own profile on the PC. When I used to connect my iPod to the PC, I just pulled the plug out of the back of the Dock, and plugged in my iPod - iTunes recognised it without a hitch.
Now I've got a dock as well, plugged into another free USB port on the PC, but when I put my iPod in, iTunes won't recognise it.
iTunes still recognises it if I plug it in the way I used to, however.
I have tested the USB port with other peripherals, and it is fine. I have tested the dock by 'bypassing' the actual dock and plugging the iPod directly onto the cable. Still nothing. But this dock and cable work fine when plugged in to my stereo, so I really don't think the fault lies there.
Has iTunes 'registered' my iPod on a certain USB port, and not recognise it in another? Do I have to reset it via my iPod updater?Is the USB port your have your dock plugged into or your cable plugged into a USB 2.0???
Is it one of those "handy in front or on the front of your pc tower casing"??
If your answer to the first question is yes, then I have no clue how to help.
If your answer to the second question is yes, then the problem is with the actual USB port, you see the computer manufactures put those handy USB 2.0 ports on the front but the problem lies in the wires that connect it to the mother board. The wires can't handle the 2.0 communications and this confuses the computer, and consequently the computer and iTunes will disable that port and not recognize it.
Post back your response, I am curious. -
Itunes / mac mini not seeing ipod
When I plug my ipod into the mac mini (usb) my mac doesn't recognize or see it. That means I can't update any songs on my ipod from my itunes library. I've tried:
- resetting the ipod,
- uninstalling and reinstalling itunes,
- plugging the ipod directing into the usb port on the mini base and the monitor usb port,
- putting the ipod in disk mode and
Still my mac does not see the ipod.
Upgraded to iTunes 7.2 a few weeks ago. It's been working fine the last couple of weeks.
Please - help!!!All I can think of:
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Is Adobe Bridge included in Photoshop or Photoshop Elements?
Is Adobe Bridge included in Photoshop or Photoshop Elements?
-
Day 1. Went to Apple store because iMovie was not working. It kept shutting down. Prior to going to the store, I called Apple Support and deleted and reinstalled iMovie. Still did not work. Then I went to the Apple Store. After an hour it finally wor
-
SCEP last quick scan end times not showing up in console
Hello My company is using SCEP to protect our environment with SCCM 2012 R2. We have schedule quick scans to run at 2am on Sundays, but when we look at any device collection and add the column "Endpoint Protection Last Quick Scan End Time", no time a
-
Hi, We have a copy of production client in Quality system. This client copy was done few months back, can we update the client in quality with the data which was updated in production after the client copy. Or will I have to do entire client co
-
Can't change password on 10.0.0.1
I can get to the change my password screen, but when I enter an new 8 character alphanumeric password, I get "This is a required field" in red. Also, is my present password "password" or is it the Network Key. I have a Wireless Gateway 1.