USB 3.0 Dock doesn't recognize dvi-d

I have a ThinkPad T540P and a USB 3.0 Docking station. I can get a VGA monitor to work with the adapter going into the DVI-I port, but I can not get a monitor to work with the DVI-D cable. Can anyone help?
Thanks.

hey RagingPigeon,
try uninstalling all USB control drivers from your unit and then install this :
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015025
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

My iPod will not charge though it is turned on. and I've tried multiple adapters and computer usb. My computer doesn't recognize it either.

I've tried multiple adapters and computer usb. My computer doesn't recognize it either.

Try:
iPod touch: Hardware troubleshooting

The Dock doesn't recognize applications

I have a problem that the Dock sometimes doesn't recognize that I've opened an application.
It doesn't show the little dot underneath the app in the Dock and the menus when pressing the application is also not correct since the application is open.
It can be everything from third party apps to Apples Mail app.
What can I do?

Nevermind, I found another thread about this. https://discussions.apple.com/thread/4150205?tstart=0

IPOD charges when connected with USB cord, the computer doesn't recognize

I have an IPOD 4GB nano, when I connect the USB to the IPOD, it charges but the computer doesn't recognize it, itunes wont automatically start nor does it even show up on itunes. My other IPOD works fine with the cord. I tried the nano with another cord and still has the same problem. I tried resetting the nano, i've checked the usb ports...PLEASE HELP!

Sorry for your difficulty. Might be better to post here though:
http://discussions.apple.com/forum.jspa?forumID=826
Good luck,
Steve M.

T440s Windows 8.1 Pro and USB 3.0 dock not recognising DVI LCD panel

Perhaps somebody could help me here.
When I connect the USB 3.0 dock to my T440s, I then cannot get the second LCD monitor to be recognised by Windows via the USB3.0.
The monitor is not being recognised as it is is not seen as one of the optional displays in the 'Intel HD Graphics control panel' window.
The driver however for the second monitor is fully up to date and it works fine when I connect the LCD to the VGA port directly on my computer. Also the second monitor is being recognised partly by the windows OS as it comes up as a second screen under the 'screen resolution' window.
My set up is shown below. I am thinking that perhaps there is an issue with either the NVIDIA or Intel HD graphics chip. I read somewhere that windows uses one or the other depending on the load. I am worried that there is some problem with that mechanism.
Can anyone help or give me some advice on this? All driver are up to date.
John
System Unit
Nvidia GT730M Graphics without docking connector
Processor
4th Gen Intel Core i7-4600U Processor (4MB Cache, up to 3.30GHz)
Display Panel
14.0" FHD IPS With WWAN
Solved!
Go to Solution.

I have found a workaround - disable the nvidia card

My iPhone 3G charges with a charger, but not when connected via USB to my computer and iTunes doesn't recognize it.

Hello, my iPhone charges when I charge it with the wall plug but not when connected to a computer via USB and my iTunes doesn't recognize my iPhone either. iTunes recognizes my iPod and iPad just fine. I have been to Apple iPhone support page and I have restarted my iPhone, the computer, tried different USB ports, etc. I have also tried my iPhone on different macs even with different versions of iTunes and no luck. This all started when I was cleaning out some lint from the usb connector, could I have damaged some part of the docking connection? But why does it charge with a wall plug then?

I fixed the problem. When I was trying to clean the connector of the iPhone I must have bent some pins. I have straightened them to the best of my ability and now it syncs. If your iPhone charges, but doesn't sync, most likely you have a similar problem, because the iPhone doesn't need all of its pins to charge, but it does need all of them to sync.

Macbook Pro 15" USB PORT DOESN'T RECOGNIZE ANY DEVICE.

I got my macbook pro 15" for about 1 year and 2 weeks ago, when I turned on my macbook and put my mouse ( Death Adder) into the USB PORT, my macbook DOESN'T RECOGNIZE IT. There are 2 usb ports on my macbook, I tried both port and there was only one port work correctly, the other one didn't work at all, I also tried to put my memory stick, external hard drive, vodafone 3g usb, ipod,....into that USB PORT but non of them worked. Is there any one here have the same problem???? Can you guy help me please. I stay quite far away from Apple Store so it is hard to bring it to repair. I tried to reset SMC, Update Software,...but still not work...HELP ME PLEASE...

I can't fault your troubleshooting. Sounds like a bad port.
Home remedies are limited. You can grab a magnifier and shine a flashlight in there. If you see any foreign material, use a toothpick or other non-conductive tool to extract it. If you can, give it a good blast of (dry, canned) compressed air to blow any particles loose.
Sometimes you can trick a flaky USB port into working at least intermittently by plugging in an extension cable or right-angle connector. Play with a device that lights up so it's easy to see whether it's working.
Take a hard look inside the connectors at the end of your Death Adder and other frequently-used devices. If you see any corrosion or bent pins, that's what damaged your USB port.
If the port requires physical repair, it's best to use Apple or an authorized dealer because if they make things worse while trying to fix it, they have to make it right. Joe's Appliance isn't similarly accountable.
If you need more USB ports, ExpressCard to USB adapters are dirt cheap.
Good luck.

IPhone 4 frozen with screen image of usb connector with arrow to iTunes logo. iTunes doesn't recognize my iPhone message says in recovery mode must restore. Try to restore and get - 1 error. What do I do now??

iPhone 4 frozen with screen image of usb connector with arrow to iTunes logo. iTunes doesn't recognize my iPhone message says in recovery mode must restore. Try to restore and get - 1 error. What do I do now??

Hi there beee19,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
-Griff W.

TP T60 with VISTA and dock doesn't work with DVI

Hi, at the first excuse my English.
I am beginner ]:->
I have Lenovo T60 with vista. I have advance dock from lenovo. DVI on dock doesn't work correctly. External display is distort, noisy.
After start of Vista is all right. But when I use blank white page monitor switch off and on in a circle. Monitor is in good order. Advence is in good order. (I change it 3 times).
Thank you for help or inspiration how to find a solution.

ok, i think i understand you now. you have an advance dock with a third-party PCI graphics card and can't get it to work under vista. my best recommendation is to try different drivers. i am not 100% positive but your PCI card might have to have the same GPU as your T61 to be compatible. perhaps someone else with more experience on this can help.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

ThinkPad USB 3.0 Dock - Firmware update doesn't work

Hello,
My company has bought over 200 ThinkPad USB 3.0 Docks to use with HP Folios to connect dual and single monitors. Some users have experience multiple issues with this product and I am trying to determine how to resolve these issues. I first want to update the firmware that is located here: http://support.lenovo.com/en_US/guides-and-manuals/detail.page?DocID=UM014961
ThinkPad USB 3.0 Dock - Firmware Update - Lenovo Docking FW Update Tool V1.0
I have the USB 3.0 dock connected to the 3.0 USB port on the Folio. The unit I am testing seems to be working fine as I have dual monitors up, external keyboard and mouse are working.
I ran the .exe, a command window comes up, and it attempted to look for the device. The text is as shown:
1. Initialzation<> Success
Start Search HUB
!!!No device found!
Press any key to continue . . .
This has been tried on several devices and it simply does not work. Does anybody have any suggestions? I have contacted support which was a complete waste of time because they have no idea what I am talking about.

I'm going to return my dock if possible. My main problem is that I cannot view Vmware virtual machine which is required for work. 2nd I can't view photos on my dual screens, it just hangs saying "Loading...", but I can view them on my W520 LCD Display. 3rd, I can't view a downloaded video, as in an .mp4. I disabled the hardware acceleration in Firefox, so I can see streaming video.
I have a Thinkpad W520 and an X1 Carbon and both exhibit the same problems with the dock.
I tried upgrading the DisplayLink Drivers to the 7.x version and that created a slew of problems. The Dock firmware driver link in the OP doesn't work either. As mentioned it couldn't find the device. Uninstalling the drivers and reinstalling the stock one cause lots of problems with my W520. The dock would try to connect but it kept connecting and disconnecting and the cycle would continue infinitly. It wasn't until I did a system restore that I could get it working again to where I can use the dock again.
I am extremely dissapointed with this dock.

Macbook Pro doesn't recognize Flip Mino camera in USB port after Yosemite upgrade

Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.

I don't use FLIP, but if you get no other help here,
consider the following ideas.
If neither restarting your Mac
nor reinstalling OS X fixes your
problem, you might find some
help if you search or post in the
CISCO forum where Flip users post.
Message was edited by: EZ Jim
Mac OSX 10.10.1

Mac Pro doesn't recognize USB 3.0 PCI express card

Mac Pro doesn't recognize USB 3.0 PCI express card. Does it need specific drivers?

I did a little searching for that card. The more I looked at it the more I felt that, yes, it needs a driver, and no, one doesn't exist for the Mac. So it looks like that is a card only supported for PC's. But to be sure, if I were in your place at this point, I would contact MSI directly.

Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
Getting it running over wireless rather than USB might be worthwhile.
Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

Media Encoder doesn't recognize Behringer USB mixer

I just purchased a Behringer Xenyx X1222USB mixer to use for live stream events using Flash Live Encoder on my MacBook Pro. Flash Encoder doesn't recognize the USB input from the mixer. Other I know the computer recognizes it since I went into the Audio Settings and can see the USB input there with audio levels.
I use Yosemite platform. Any help needed as soon as possible.

So, it looks like Media Encoder is stuck in a trial version? The only formats available are indeed .f4v, .flv, .mp3 & h.264. Is a reinstall of Media Encoder the fix?

I just purchased a Samsung DVD player with a USB port; says you can use a PC or player to play music; I tried to use my iPhone but it doesn't recognize it. Can you use an iPhone as a player, or would it have to be an iPod

I just purchased a Samsung DVD player with a USB port; Samsung says you can use a PC or player to play music using the USB port; I tried to use my iPhone but it doesn't recognize it. Can you use an iPhone as a player, or would it have to be an iPod? Or is there some ap?

Skip the DVD player use an HDMI connection to your system.
Use this http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a&fs =s%3Dalpha
or for just Audio use the 3.5 MM jack.

USB 3.0 Dock doesn't recognize dvi-d

Similar Messages

Maybe you are looking for