USB 3.0 Driver updated and corrupted .

Hi, I am using many of your products on my computer and i just updated the USB 3.0 drivers with the MSI update utility . I had 2 updates and one of them worked and the driver update didnt . I then tried to install it again . I saw that nothing happened so i restarted my computer to try again. I restarted my computer and my keyboard and mouse don't work . So i cant login to reinstall or do anything on my computer. I tried pushing the F8 key and also F2 key on boot. The mouse and keyboard are working fine there . Its only when i start windows and want to login.
Help would be much appreciated. PS i probably dont have a restore point but i'll look into that. ( if i could get directions for using that restore point it would be much appreciated to ).

No need to make 2 identical threads.
>>Please read and comply with the Forum Rules.<<
Continue https://forum-en.msi.com/index.php?topic=183063.0
Topic Locked

Similar Messages

  • Sound not working after checking for driver updates and resetting bios

    I am running a  (HP Pavilion dv7-6c60us Entertainment Notebook PC)
    I had muted the sound and did a system upgrad prompted by my HP assistant after logging on.   Now when I try to get sound nothing happens.  So I went out to the support site and checked for driver updates and none were found.  So I then went into my system bios and reset it as stated in a support for sound not working and still no sound.   HOW DO I GET MY SOUND TO WORK AGAIN?

     From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • OS X 10.5.2 Epson Driver Update and 1.4.1

    I've experienced the problems of Lightroom, Leopard and Epson, and managed to get to passable prints having performed a full system restore a couple of weeks ago!!
    Now everytime Software Update runs it offers an 'Epson Driver Update'. Have other people installed this? I'm a little worried about updating and going back to poor print quality.....
    Also having seen a couple of other posts reporting problems, what are people's experiences with 1.4.1 and Epson?

    I don't what all it updates; it's in an installer that gets run auto if you say o.k.
    It regressed the 3800 driver, but reinstalling the beta again was easy enough as I keep printer driver installers handy.
    Calling it an update for some printers is misleading, and sorry I don't know how you could find out except by installing it- which I don't recommend if everything is working all right.

  • Troubleshooting Updates and Corrupted Files

    Since a few days ago, my computer is not downloading its updates and its says that the downloaded files may have been corrupted and although I download them again and again, it still says the same thing. Also my computer isnt reading the adobe flash player nor silverlight.

    FrancisClass,
    your image shows that three of these four updates have a “Restart” button rather than an “Update” button. After restarting your MacBook Pro, does Software Update still show you these same updates? If it does, are they shown with “Update” buttons, or with “Restart” buttons?
    Regarding Flash Player and Silverlight, are you using Safari? If so, have you ensured that its plug-ins (such as Flash Player and Silverlight) are allowed to run? Open Safari’s Preferences, select the Security tab, and make sure that the “Internet plug-ins: Allow Plug-ins” checkbox is checked.

  • Computer crashed while Firefox was updating and corrupted the program so it won't open at all and I can't get my many bookmarks

    I have had recurrent problems with my computer crashing for the past several months that I was not able to fix. I was downloading and installing updates for Firefox when the computer suddenly and completely crashed - just an immediate shutdown. When I was able to reboot it, Firefox would no longer open, and I got the following error message, along with the 'bong' sound or an error: C:\ProgramFiles\MozillaFirefox\js3250.dll is either not designed to run on Windows or it contains an error...." The crash in the middle of the download corrupted Firefox so that it could no longer be accessed. HOW CAN I RECOVER MY FEW HUNDRED IMPORTANT BOOKMARKS? Any help you can give me with this would be greatly appreciated! Thanks!!! Ron

    Do you have a PowerPC processor or an Intel processor?
    Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
    *http://www.mozilla.org/firefox/15.0/system-requirements/
    *https://support.mozilla.org/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
    You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
    *Firefox 3.6.28: http://www.mozilla.org/en-US/firefox/all-older.html

  • Elitebook 8540P USB 3.0 driver speed and disconnect issues

    Have 2 external SSDs in ICY Dock USB 3.0 enclosures.   If I can an SSD to the rear most USB 3 port,  the drive is available,  but only performs at up to 100MBps vs 200MBps if I connect it to the eSata port using an Icy Dock eSata enclosure.
    Also,  if I plug either of the Icy Dock USB 3.0 enclosures into the front most USB3 port,   it start connecting and disconnecting all of the time.
    I am running the latest NEC USB 3 drivers and Windows 7 Ultimate 64-bit with SP1.
    Thanks,
    -Matt

    My USB 3 was so munted with drives dropping in an out on an HP8460p (with Windows 7 older than the PC and never rebuilt). It occurred after plugging in a suspect broken drive some months ago. All the drives would work as USB 2.0.
    I had a go at finding all the registry keys but failed. I was beginning to think it was hardware.
    I then discovered drivecleanup and devicecleanup ( see http://www.uwe-sieber.de/drivetools_e.html) on a message here http://www.techspot.com/community/topics/usb-drive-or-flash-problems-how-to-cleanup-and-remove-old-u...
    Problem solved.
    I used both tools and could not believe how many obsolete hardware devices were there.

  • Driver update and bug reporting t

    I am wondering what users of this forum think about the idea of a responsi've bug reporting mechanism along the lines of the ati catalist programme in which bugs get reported to the drivers department.
    the purpose of this would be for the following
    to enable users to report to creative bugs in the software
    To enable creative to then identify (and acknowlege) problems early and work towards resolving any that appear.
    To enable creative to then offer incremental or updated software on a timely basis.
    This would improve users perception of creative as a company that is responsi've to its users and enable problems to be dealt with promptly.
    Please try and keep comments relvant to the original post as I think it might be interesting to gauge users perception of this idea
    Andy

    Vista?
    Ooh boy.
    http://support.apple.com/kb/TS1538
    Good luck.

  • X99 Intel USB 3.0 Driver update

    The latest on MSI's global site reads v3.0.0.34
    The latest on Intel's site listed for series 8 (which I assume Haswell is), is v3.0.1.41
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22824
    Given the host of USB problems I've been having:
    1) any external USB 2.0 audio interface either fails, stops working randomly or gets stuck
    2) my USB 2.0 Impulse 49 Midi Keyboard Controller occasionally gets stuck on a note
    3) My keyboard resets randomly turning numlock off
    ... Both 1&2 are plugged into the USB 2.0 ports next to the PS2 mouse jack.
    I figured maybe this is worth installing.
    Why is it not hosted on MSI's site?
    Is there a compatibility issue? Am I looking at the correct driver for X99?
    I have tried all manner of things. Went through 3 different audio interfaces now. That industry does not intend to upgrade to USB 3.0 for a very long time if at all from what I understand. I also ordered an PCIe USB 2.0 card to give that a shot from newegg, but I don't have high hopes. The next step is to drop $1000 just to get a PCIe Audio Interface, which is ludicrous.

    Quote from: stilup on 22-November-14, 13:08:32
    I believe this  is just for Win 7.
    Well that particular link yes, because I am running Windows 7 64.

  • Start up error and beats audio crackling after realtech driver update

    I am having several issues. 
    If I plug in a external hard drive, the OS will not start and goes to "press esc for start up menu" in lower left corner on a black screen. I press esc and it goes to boot options.  I have done what HP states and hard started my computer twice and it did not help, and I have found no other suggestion to try and fix this. I have tried everything, including a system recovery and it still goes to the start up menu options.  If I disconnect the external, it will still appear, but the operating system will start up after a few seconds.  Why do I have to disconnect my external to start OS.  And for some reason, my external has been seated in the hardrive section of my computer, instead of the removable storage devices in my computer.
    Also, after updating realtech driver, my beats audio speakers pops and cracks. I tried to roll back driver, but no changes. Please help. I dont want to go thru the trouble of sending my computer back for repair. This is really upsetting!!!!  I cannot play any videos or music, because of the crackling.  Why did it do that, and is it fixable.  My laptop has not been jarred or dropped in any manner to have caused any damage.  It started after the driver update, and even tho I rolled back the driver, it still does this.

    Hi @rbuckner35 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 17t-f000  Notebook and issues with Beats Audio and startup issues. The startup looks at the USB as one of your Boot options. So it can not load anything until it know that this is not a boot device.
    You could restore the BIOS with this document selecting the reloading the BIOS default settings which could resolve the issue with the sound.
    Here is a fix that has helped others.
    1. Right click the Speaker icon in the bottom right corner by your time.
    2. Click Playback Devices.
    3. Click Speakers.
    4. Click properties.
    5. Click the advanced tab on the Properties window.
    6. Change the Default Format drop-down to the highest quality.
    7. Apply the properties.
    8. Click OK to close the properties window.
    I hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My HP Support Assistant is downloading driver updates but not installing,

    Hello there,
     I use  HP 15-r046tu Notebook PC, the issue is my HP Support Assistant is downloading driver updates and every single time its failing to install. I even saw earlier posts on this issue and downloaded the latest support assistant and also followed the instructions but yet its not helping to solve the issue. btw i am using windows 8.1.
    I would really appreciate if one could help me solve this isuee. 
    Thank you .

    Farhnahasnat
    Welcome to the HP Community Forum.
    Commentary
    Depending on the underlying cause of the problem, the HPSA (HP Support Assistant) may never be able to install the updates on your particular system.  The problem could be a server problem, it could be the Internet path the data has to take to get to your part of the planet, it might be your Internet provider  that, at any particular moment in time, is not cooperating, it is possible that your computer is having RPC issues due to outdated drivers, File System errors --- whatever.
    IF you find and fix whatever mystery is causing the root cause of the prlblem, then Voila!  The install portion of the program may work.
    This wonderful program works for millions of people -- and yet it does not work for many deserving folks who have done nothing wrong and who do not know why it does not work for them.
    Make sure your Windows Updates are current.
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    Next:
    Close all your programs and shut down your computer
    Shut down and Switch off any other computers in the network
    Switch off any printers on the network
    Switch off the Router
    Disconnect everything on this computer (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook model
    Switch on the router - wait at least thirty seconds for the router to boot.
    Boot the computer and log in
    Reminder:  Hard Reset is just a device Reset.  The procedure does not wipe out your files nor does it destroy your Windows setup in any way.  It just "clears the cobwebs".  Depending on the cause of the problem, this kind of "reset" can fix a variety of computer glitches.
    This exercise is unlikely to fix the problem; it might do so if the problem is minor and related to stuck instructions or minor temporary link or device issues.
    Suggested Workaround to the problem
    You can use the Patch list provided by HPSA and then open your computer's website to find, download, and install the drivers and software you want to update.
    NOTE:  Please see the Comments below before you Update your BIOS.   Please do not update the BIOS unless it is necessary and your computer is fully backed up beforehand.   
    Your computer's Support Website:
    HP 15-r046tu Notebook PC Drivers
    Reference:
    Install Software and Drivers from HP Website
    =======================================================
    Commentary -- BIOS Updates
    It is this Expert's opinion that you should not depend on HP Support Assistant when it comes to BIOS updates.
    Depending on other factors in the system at the time the HPSA tries to hit your system with an update of this type; the results might be ... other than expected.
    You might set HPSA to "Notify" to prevent it from trying to update your BIOS.
    ONLY update the BIOS when you see an update in your computer's webpage AND that update can be used to provide a fix for an issue you have discovered in your system.  In other words:  If your computer is happy, do not update the BIOS just because you think it would be a nice thing to do to it.
    If you decide to update your BIOS,
    Make sure ALL your backups are current and complete - this means everything you need to restore the system in the event that something goes wrong.
    Understand that even when you do everything exactly right, you can end up with a bricked computer, that is, an expensive paper weight.
    Make sure you have at least your critical data on some form of external backup.
    Disconnect USB drives and any other unnecessary hardware.  Keyboard and mouse can stay connected.
    Always run in AC power when updating the BIOS, never on the notebook battery
    Do not touch the system while the update is in progress
    Optional: Leave wireless button ON. You might switch off the router to assure there are no interruptions.
    Updating the BIOS
    =======================================================
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • Windows 8 32-bit driver update

    Recently, I've use BootCamp for 2 years. Might be I should explain from beginning but sorry for the long explaination. I used OS X Snow Leopard 10.6.8. on 2011 then I started to use Windows using BootCamp. So I installed Windows XP. After several months, I stopped using Windows XP because I found out that Windows 7 64-bit have better system to run games. But Apple shows that MacBook Mid 2010 with 2GB RAM can't support 64-bit version. So I update it to OS X Mountain Lion on 2012 for upcoming years to become secondary. I didn't bother about the 64-bit version can't run on my Mac. So I proceed the installation, before I installed Windows 7 64bit, I installed Windows 7 32bit and it run perfectly but some quite usually when running PC games like Assassin Creed Brotherhood = the flag on top of Castel Sant'angelo don't wave and when run Autorun there so sound (some installation of apps/games) + decrease of visual performance even though installed the latest update driver. So I just installed 64bit version. After the installation, I installed the driver updates and everything including PC games and latest DirectX. It works 100000% perfectly than 32bit version like more features, more interaction in games, more realistic graphics and stunning graphics visual. Later then on late 2013, I purchased a legit copy of Windows 8 Pro 32bit. I install Windows 8 Pro but there seems a problem during installation. It says my Mac can't support Windows 8 and it seems my Mac still read its OS X as half Snow Leopard and half Mountain Lion even though BootCamp 5. Then I reformat my Mac into OS X Mountain Lion and after that I can proceed the Windows 8 installation. After installation, I tried to install the driver updates but cannot. I began to search for the latest update. I found that only Windows 8 64bit version only support but my Mac works fine on Windows 8 Pro 32-bit. No problem but no sounds and brightness to too high which hurts my eye. Run PC games 1000000000% perfectly and better graphics visual on Assassin Creed 3, Dead Island, The Elder Scrolls V Skyrim, Modern Warfare 2(all settings is highest), Modern Warfare 3(800x600 resolution) and Assassin Creed Brotherhood(all settings is highest). I didnt download the update. I leave it. Please make an update driver for Windows 8 Pro 32bit on MacBook Mid 2010. It just works fine, no problem just the update drivers for sounds and the brightness.

    I'm sorry but this was very difficult to read. If I understand you are having an issue installing Windows 8 32-bit. Is this right?
    If so this is not supported as per http://support.apple.com/kb/HT5628. Specifically: "If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp."

  • Searched for driver updates - do I need them all? Qosmio G30-175

    Hello people, new Toshiba user here.
    Last week I bought a Qosmio G30-175. After a Bluetooth installation problem everything is fine.
    I updated BIOS today to v1.70 (even though the Windows version wouldn't work)!
    I thought I would do a search for any driver updates and I find that 86 updates appear!!!
    Could somebody tell me whether all these updates are merely available for use, or does my particular laptop require all these updates?
    Thanks in advance.

    Hi
    What?? 86 drivers??
    Are you sure? I have checked the Toshiba driver page of Qosmio G30-175 (PQG30E) and found only 50 drivers for Windows XP MCE.
    But the list of 50 drivers contains double entries! For example there are 2 BIOS, 2 LAN drivers, different modem drivers, etc listed.
    You should install only the drivers and utilities which are listening in the Installation instruction document. This guide line is important and you should follow this guide line if you install the Toshiba drivers manually.
    You will find the document also in the driver section

  • Can't burn CDs - can't find driver updates

    Aaargh! It's happened again!!!
    When I put a CD in, the CD is recognized as blank but when I try to burn the playlist, Itunes hesitates for about 30 seconds and then ejects the CD with no error message.
    This happened about three months ago and I spent two days looking for driver updates and mindlessly uninstalling applications and it began working again. I am certain I am having some conflict with other software because my burner works fine with SonicStage with the same CDs. Does anyone know how to identify the offending software? I have scanned several posts with similar issues, but do not see anything in the past few days which applies.
    My diagnostics are:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway E-4100
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Video Controller (VGA Compatible)
    NVIDIA GeForce 6800
    NVIDIA GeForce4 Ti 4200 (Microsoft Corporation)
    Connected Device Information:
    DiskDrive, ST3160812A, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: JLMS XJ-HD166S, Rev DGS3
    Audio CD in drive.
    Found 14 songs on CD, playing time 47:42 on CDROM media.
    Track 1, start time 00:02:00
    Track 2, start time 03:00:65
    Track 3, start time 06:23:00
    Track 4, start time 10:34:72
    Track 5, start time 12:18:40
    Track 6, start time 15:35:57
    Track 7, start time 18:35:42
    Track 8, start time 21:04:62
    Track 9, start time 24:09:32
    Track 10, start time 27:54:65
    Track 11, start time 31:57:02
    Track 12, start time 34:21:27
    Track 13, start time 37:23:25
    Track 14, start time 44:53:65
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: HL-DT-ST DVDRAM GMA-4020B, Rev A105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12.
    The drive CDRW speeds are: 4 8.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    There was a post May 1 with lots of good information however it was not helpful for me. I tried what was suggested and still can not burn CD. Apple support was not able to help either. I get to install blank CD>>> incert the CD and nothing happens. No error message. I don't even know what to look for or where to begin. This just started happinging when I updated with the lastest version of iTunes.
    Got any helpful suggestions... please post details

  • 8330 alltel curve won't sync with PocketMac, even after driver update

    Sooo I have a blackberry curve 8330 I recently got through Alltel. I
    installed PocketMac twice now, and was reading all about the FAQ's and
    tech. support and it's not recognizing my blackberry. I tried syncing
    and it said the "error 1: skipping" thing. I also downloaded the
    "driver update" and it's still doing the same thing. It shows my phones
    like charging when it's plugged in but I can't sync it. This is my
    first blackberry and I'm confused.
    Can someone help me, please?
    And, does anyone know what "Enterprise Activation" is?
    Thanks
    EDIT: sorted out the formatting
    Message Edited by Andy on 07-26-2008 09:21 AM

    I also had problems syncing my 8330 Blackberry with my Mac with a program called PocketMac and after installing and reinstalling the program several times and syncing for hours on end (the program was just sitting their), I also spent $49.95 for PocketMac Tech Support. Still no results. I did a little more research and I found a program that I thought was easy to install as long as you follow the simple instructions and it worked great, the program is The Missing Sync for Blackberry Version 2.0.1. it cost $39.95 it is available at www.markspace.com. 

  • Mac app store driver update killed my printing

    Printer:  Envy100 (D410)
    OS:  Mountain Lion (OSX 10.8.2)
    Printer was working fine prior to this morning when I was notified that there was an update via the app store.  I installed the driver update and now all HP software will not see the printer.  I have done the following:
    *  Downloaded latest software from HP and re-installed - no change, cannot see printer
    *  Uninstalled HP Printer software, rebooted, re-installed latest version - no change, cannot see printer
    *  Added the printer first via System Preferences-->Print  & Scan (no problem there) then tried to use the HP Utility to see the printer - no change, cannot see printer
    *  Tried to set up the printer manually using IP address - still does not see the printer
    All of this was working fine yesterday.  I am now without the ability to print, other than by email using hpeprint.com.
    I don't know how to remove the latest update that hosed me.  Please help.
    Edit:  I should also note that all the PCs in my house have no issues.  Nothing changed on the printer itself, the only thing that changes is the driver software on my mac.
    This question was solved.
    View Solution.

    Ok,
    Reboot the router by unplugging it for 30 sexonds, then try following the HP Setup Assistant again.
    If it still fails to locate the printer please let me know your router brand and model.
    I now tested the Envy 100 using the latest HP Printer Drivers 2.12 and were able to print with no issues..
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for