USB 3.0 issue

I just bought my daughter  a Deskjet 1000-J110 and she is attaching it to her laptop (Win-7) via usb cable.  When she prints she gets a blue screen.  I think the problem is that the USB 3.0 drivers need to be updated via this link:
http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129
The problem she is having is that when she clicks download it asks her to save the file, which she does, but she doesn't know what to do after that.  It doesn't install upon saving the file.  Can you provide detailed instructions on how to perform this update?  Thanks.

Hi,
Does your daughter machine have USB 2.0 port ? There is a note around saying do not use USB 3.0 for printer at this stage.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Still no fix for USB card sleep Issue

    Hi I just bought a 3rd party USB 2.0 card (an IOGEAR GIC251U). When I plug my LaCie extrenal USB drive in it works fine, until the computer has been to sleep. When the computer wakes up the drive has disappeared and I get a message saying that the drive has been improperly disconnected and that I can damage it by not ejecting before disconnecting.
    Looking at the posts on this forum, it seems that this PCI USB card sleep issue is a persistant problem. I have even heard buying a card described as a "crap shoot".
    That is not an acceptable answer to me. I insist that Apple reccomend a USB 2.0 card that it is willing to garuntee will work with my mac (an AGP G4 blue and white tower). If not, how can Apple in good faith sell computers with PCI that isnt equipped to handle built in apple features such as the sleep mode? I don't mean to sound like a demanding jerk of a customer but I dont think it is too much to ask that my computers advertised features (PCI expandability and sleep mode) both be able to work together.
    G4/400 MHz AGP graphics   Mac OS X (10.4.6)  

    Hi
    xlr8yourmac.com has a wealth of info on compatable devices of all kinds, it's often worth looking there & other Mac sites before purchasing..
    Apple cannot possibly determine compatability of all available 3rd party devices, it is up to the vendor to determine what systems/OS versions their hardware will support.
    I would stick with a vendor that is known for Mac support, such as Sonnet (or others that are sold through Mac sites such as OWC, SmallDog,etc.,) unless you are willing to do significant research on a specific product for compatability with your specific setup prior to purchasing.

  • Another windows 8.1 usb 3.0 issue

    Hi all,
    my usb 3.0 port worked fine in windows 8,, then updated to 8.1 and 8.1 update 1.
    Then I had to run a system restore (to a point in time 24 hours before), and then... boom:
    No device is detected anymore on the usb 3.0 port of my laptop.
    No usb key, no disk... the usb 3.0 disk light turns on and it's blue (3.0) but the device is ignored by windows: no error
    in device manager, just nothing.
    The only thing I noted, is that when I insert anything in that port, the system interrupts entry of the task manager spikes
    to 17% and stays there forever, until I reboot.
    I've tried everything I could find on the web for 2 days, I'm probably giving up and will disable the "Intel (R) USB
    3.0 eXtensible Host Controller -0100 (Microsoft)” entry in device manager.
    I can't believe it's a hardware issue... but it behaves as if it was. My UEFI is very simple and there are no settings for
    usb, and the issue persists in safe mode too.
    Any idea?
    Thanks

    Hi,
    Please check Device Manager if there was any error message with USB 3.0 driver. If so, what's the error code of it.
    You can refer to the link below to fix USB 3.0 driver probelm for test:
    Install USB 3.0 and other USB devices:
    http://windows.microsoft.com/en-us/windows-8/install-usb-3-usb-devices
    Roger Lu
    TechNet Community Support

  • Are USB audio interface issues on iMac Haswell resolved?

    HI,
    i just ordered a 27 inch iMac, maxed out with a 1TB SSD.
    I noticed the imac doesn't have an audio in jack and figured i'd shop for a good USB Audio Interface.
    But then i came across all these USB audio interface issues on the new iMac.
    This is incredible to me because iMacs are often used by creative people and lots of musicians.
    For me audio is VERY important. I record music and i record sound for animation and video.
    Apple thus far seemed to be avoiding the topics and issues at hand.
    Are the USB audio issues resolved? What was resolved? What was the problem (Maverick? Fusion Drive)?
    Is it wise to choose for a Thunderbolt Interface? Which one?
    Any help would be hugely appreciated.
    Especcialy since it seems such a wide spread problem.
    Thanx

    doubt it would be a general issue
    usb is a universal serial bus it always require a driver for anything
    and the driver of one external audio device would act different then the driver from another external audio device
    so it would be very unlikely that an external audio card using a cirrus logic audio chip would cause the same issues with the imac as one with a realtek or soundblaster audio chip
    not that there could not be issues with all of them but not likely that they would suffer from the same issue

  • Latest BIOS and USB 3.0 Issues... Still?

    95% of the time that I use my T440p, I boot from a Windows To Go USB 3.0 stick that is Windows 8.1 based.  My native hard drive is the default Win 8 from Lenovo.  After updating to the latest BIOS (i.e., 2.19), which I believe is supposed to address the USB 3.0 issue, I still am getting the prompt/message to "Keep the USB drive plugged in" and to only remove it after the PC has shut down, etc.  When this message is shown, I have never observed a loss of functionality.
    Thoughts?
    I'm on the High Performance power option,  and have the USB selective suspend setting disabled, and also changed the USB 3.0 setting in the BIOS to Enabled instead of Auto after the BIOS update. Should I go back to Auto?

    Anybody have similar issues?  I guess there's few people using a Windows To Go stick?
    In any event, this is still a significant issue for me despite upgrading the firmware on the 128GB Kingston DataTraverler Workspace running Win 8.1 as well as trying the following registry edit/hack (http://blogs.msdn.com/b/usbcoreblog/archive/2013/1​1/01/help-after-installing-windows-8-1-my-usb-driv​...

  • How to install this update and solve USB and touchpad issues?

    I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
    Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
    The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
    The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
    This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
    Driver revision history:
    Twinhan VP704A Driver Release note
    Note:
    1.In case the system crashes while running with VP704A, Please install ULI
    USB 2.0 host driver in \ULiUSB20Driver
    2. For XP/SP1, please update with the patch in
    <http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
    3.In XP/SP1, updating driver will crash the system, while new install is ok.
    The trick to update driver in XP/SP1 is shown in the following steps,
    a. Uninstall the driver
    b. Unplug and plug the USB device
    c. Install the driver
    4. To support remote controller, please launch Agent.exe in \Agent.
    Further details can be found in \Agent\Readme.txt
    Known issues:
    1. Multi-instance is not supported
    2. Remote wakeup is not supported
    3. High CPU usage in Analog audio/video capture
    4. Bad VBI Signal using YUY2 color format
    5. AV out of sync if audio captured from wrong filter.
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    6. Noise with analog-TV and FM Radio
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    Driver revision history:
    2005/10/24, Version: 1.0.2.8
    Bugs fixed and new features:
    1.Crossbar not properly set.
    2005/10/21, Version: 1.0.2.7
    Bugs fixed and new features:
    1.Firmware version read from FLASH OK!
    2005/10/14, Version: 1.0.2.6
    Bugs fixed and new features:
    1.Mutil-Access driver blank part below part screen when VBI!
    2.Mutil-Access driver HCT driver verify crash fix!
    2005/10/07, Version: 1.0.2.5
    Bugs fixed and new features:
    1.Tuner Power off when S-Video,Composite.
    2005/09/30, Version: 1.0.2.4
    Bugs fixed and new features:
    1.Agent.exe updated for repeat bug!
    2.TI5150 Register for Video Format fix!
    2005/09/29, Version: 1.0.2.3
    Bugs fixed and new features:
    1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
    Note: "USB Audio device" filter provided by system does not support mutil-Access.
    2.Reset TI5150 when a new frequency is set
    2005/09/27, Version: 1.0.2.2
    Bugs fixed and new features:
    1.Fix I2C unstable access on some devices.
    2005/09/23, Version: 1.0.2.1
    Bugs fixed and new features:
    1.Analog TV becomes darker sometimes.
    2005/09/15, Version: 1.0.2.0
    Bugs fixed and new features:
    1.Fix INF for Windows 2000 installation.
    2.FM radio scan policy changed!
    2005/09/13, Version: 1.0.1.9
    Bugs fixed and new features:
    1.USB serial number string not visible with USBView, firmware update required.
    2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
    2005/09/13, Version: 1.0.1.8
    Bugs fixed and new features:
    1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
    2005/09/12, Version: 1.0.1.7
    Bugs fixed and new features:
    1.Improve channel lock status check performance
    2.Pinnacle INF Fix.
    2005/09/09, Version: 1.0.1.6
    Bugs fixed and new features:
    1.Add some audio initialization function.
    2005/08/31, Version: 1.0.1.5
    Bugs fixed and new features:
    1.NTSC & PAL mode resolution separation.
    2005/08/30, Version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2.Frame Drop.
    3.Pinnacle inf file HCT chkinf fail.
    2005/08/22, Version: 1.0.1.3
    Bugs fixed and new features:
    1.Add Remote controller interface in digital source filter.
    2.A new Remote controller test tool with source code in \Test_RC.
    2005/08/16, Version: 1.0.1.2
    Bugs fixed and new features:
    1.Reorg Pinnacel & Twinhan's driver & folder.
    2.VP704A_BDA_Test tool, add system code test.
    3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
    4.Firmware update
    2005/08/15, Version: 1.0.1.1
    Bugs fixed and new features:
    1.Serial number function is lost while adjusting TV audio volume
    2.RC6A CIR support
    (This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
    The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
    EEPROM should be flashed with \Firmware\M9207.bin )
    3.Serieal number, MAC address and OEM device name supported.
    Please refer to further details in \Firmware\readme.txt.
    4.Ioclt sample source code included.
    2005/08/08, Version: 1.0.0.10
    Bugs fixed and new features:
    1.Analog TV audio volume increase.
    2005/08/04, Version: 1.0.0.9
    Bugs fixed and new features:
    1.Analog TV Video mode set failure.
    2005/08/03, Version: 1.0.0.8
    Bugs fixed and new features:
    1.Off-centerf requency scan +/- 125Khz
    2.Fix duplicated program scanned in MCE.
    2005/08/02, Version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
    2005/07/28, Version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
    2.Improve I2C communication stability.
    3.Unify Signal strength & quality indication as THBda ioctl interface.
    4.Capture filter Lock status check.
    2005/07/28, Version: 1.0.0.5
    Bugs fixed and new features:
    1. The same signal strength & quality indications as VP7046.
    2. Debug build driver
    2005/07/21, Version: 1.0.0.4
    Bugs fixed and new features:
    1.Update INF.
    2005/07/20, Version: 1.0.0.3
    Bugs fixed and new features:
    1.Improve performance in PCM4
    2.Switching from Analog TV Mode to FM Mode failure
    2005/07/04, Version: 1.0.0.2
    Bugs fixed and new features:
    1.Production Tool FM test OK!
    And here is the readme from the other file within the update ?
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
    INTRODUCTION
    This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
    and Windows XP.
    CONTENTS OF THIS DOCUMENT
    1. Installation Instructions
    2. Uninstallation Instructions
    1. Installation Instructions
    (Windows 98 SE & Windows ME)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system,then restart your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows 2000)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows XP)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - Click "NEXT"
    - This program will install and load the driver and you don't have to reboot the
    computer.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller", continue to install.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    Notice:
    If you can't setup driver successfully. Please reboot your system and then follow
    above steps to install driver again.
    2. Uninstallation Instructions
    1. Open "Control Panel" folder.
    2. Invoke "Add\Remove Programs" icon.
    3. Choose "ULi USB2.0 Driver" item.
    4. Click on "Add/Remove" button to remove drivers.
    Change List:
    1.74
    1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
    2.support all USB2.0 Host Controller.
    1.73
    1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
    2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
    3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
    4.fix issue that wirless lan will disconect when plug-in usb device.
    1.72
    1.Fix issue that system will crash when USB HD copy large file.
    1.71
    1.improve Power management function in Win98/ME.
    1.70
    1.Improve the function of devcie detection.
    1.62
    1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
    1.61
    1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
    1.60
    1.To support power management functions when a HUB with USB device plug into
    a root HUB.
    1.57
    1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
    2.Fix issue that audio can't display smooth when USB device attach to system.
    3.Fix system can't detect USB dvice when USB device attach to system in
    suspend mode.
    4.Fix issue that when USB root HUB have full loading, USB HD sometimes
    transaction fail.
    1.56
    1. Fix issue that DVD decoder device can't display properly.
    1.55
    1. Fix OTI USB 2.0 hand drive can't be detect issue.
    2. Fix USB mouse can't use after resume from suspend.
    1.54
    1.Improve driver security.
    1.53
    1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
    2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
    1.52
    1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
    automatically fix file system errors
    2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
    v.1.51
    1. Improve USB 2.0 cardreader compatibility.
    2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
    v1.50
    1. Improve bulk transfer
    v1.48
    1. Fix USB 2.0 LAN driver installation hanging up
    2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
    3. Fix some laptops Win98SE booting hanging up
    v1.47
    1. Improve bulk transfer performance.
    2. Fix USB 2.0 bulk webcam preview failure.
    v1.46
    1. Support USB 2.0 and 1.1 Isochronous devices
    2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
    3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
    4. Improve device detection capability in Win9X/ME
    v1.45
    1. Fix system hanging up when resuming from ACPI sleep mode.
    2. Fix mouse sometimes doesn't disappear when it's unplugged.
    3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
    v1.44
    1. Support composite device
    2. Improve device detection
    v1.43
    1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
    2. Fix high-speed device detected as full-speed device
    3. Fix some USB mouses detection failure problem
    4. Fix some USB 2.0 hubs detection failure problem
    5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
    v1.42
    1. Fix PC Card ejection hanging up in Win98/ME
    2. Fix suspend/resume hanging up in Win98
    3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
    4. Fix some PC Card USB 1.1 device detection failure
    v1.41
    1. Add new feature that system can install driver before device is plugged.
    2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
    v1.40
    1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
    2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
    v1.32
    1. Fix issue that driver can't detect Microsoft driver in Windows XP
    if OS path is not c:\windows.
    2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
    v1.31
    1. Fix issue that driver can't install on Windows 2000.
    v1.30
    1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
    2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
    3. Fix issue that sometimes when you click "Scan for hardware changes".
    to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
    file can't be found.
    4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
    verison of ULi EHCI controller devices are plugged and unplugged.
    5. Support installing driver for more than one ULi EHCI controller devices existing on
    system at the same time.
    6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
    v1.20
    1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
    ULi Coporation. (ULi) web sites:
    http://www.uli.com.tw/ (Taiwan)
    CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
    i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

    It says above 2 relevant and 1 correct answere available .............
    I'm new here so could anyone direct me to these answeres?

  • Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

    Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
    I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
    PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
    ATTEMPTED WORKAROUNDS:
    *Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
    *Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
    *The 5 R's as recommended by Apple Support... tried and failed.
    *I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
    *Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
    * Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
    *From Windows Software config utility: Ran repair to re-install itunes 8... same results.
    *From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
    Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
    Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
    Apple iPod USB Device properties:
    Driver Provider - Microsoft
    Driver Date - 7/1/2001
    Driver Version - 5.1.2535.0
    Digital Signer - Microsoft Windows Publisher

    Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

  • Canon IR c1028 - USB and Mac issues

    I have a Canon IR c1028:
    http://www.usa.canon.com/cusa/support/office/color_imagerunner_copiers/color_imagerunner_c1030_c1031...
    I have it USB attached and Network attached. The network attached prinitng works fine but one of my home compouters is habitually attached to my coprporate VPN and so I use USB attachment. I have recently started having issues with printing from the MacBook which runs YOSEMITE as follows:
    1. Instal the printer using the driver from the above link (printer appears to be connected and online)
    2. Send print job to printer....printer makes a sound in recognition but if you watch the print queue from the Mac you see a cycle of:
    Priniting
    The printer is not connected
    The printer is offline
    This repeats every time and it does not resolve if you delete the printer and even if you reset the printer subsystem before re-installing
    Thanks for ideas ? 

    Hi, bluemoon.  Thanks for posting!
    While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area!
    We hope this helps!

  • USB 3 Instability Issues - Windows 8.1 - Windows 8, The USB 3 Stack Is Unstable On Multiple PCs And Many Devices

    The USB 3 stack is unstable in Windows 8.1 and Windows 8. I was hoping the upgrade to Windows 8.1 would improve the stability but no.
    On two different motherboard systems I have had the same experience with 64 bit Windows 8 Pro and Windows 8.1 Pro compatibility with various USB 3.0 devices and hubs including:
    An AFT PRO-57U front panel card-reader/hub, various Anker, Syba multiport hubs, and these are just a few I have tried, there are many more.
    Symptoms are the same.
    For example: the AFT PRO-57U slots are enumerated correctly as drive letters in Windows 8.1.
    Then the drives (the PRO-57U slots) disappear, then reappear, then disappear, and reappear and so on. This happens consistently and the cycle time to disappear/reappear varies from 10 seconds to 10 minutes.
    The Windows Device Manager shows the devices appearing and disappearing as enumerated devices. I have tried many trial and error methods to solve this, uninstalling and reinstalling USB motherboard drivers, different cables to the AFT PRO-57U device different
    USB 3 ports for the devices and many more...
    One of the hubs I bought specifically because it has the latest chip and firmware: Anker® USB 3.0 9-Port Hub + 5V 2.1A Smart Charging Port with 12V 5A Power Adapter [VIA VL812-B2 Chipset and updated Firmware 9081] This hub FAILs to enumerate some external
    HDDs and other devices.
    To troubleshoot I have tried many things:
    I have disabled Windows Power Options, USB Selective Suspend.
    I have disabled power options for each and every USB device in Windows Device Manager
    I have uninstalled the Asus AI Suite 3 software and the issues remain.
    I have tried BIOS settings for Legacy USB devices on and off and the issues remain.
    I have tried BIOS setting for xHCI Mode - Auto, Smart Auto, On, Disabled
    I have updated to the latest Intel chipset drivers 9.4.0.1026
    I have all the latest BIOS, drivers, firmware, devices, - anything that is involved with the USB 3 stack.
    Etc. etc. etc...
    I have contacted Asus, Gigabyte Intel, AFT, Anker Syba, etc. and they are all finger pointing.
    I have tried so many trial and error methods to solve the problem and I have run out of ideas.
    It is clearly an unstable USB 3 stack and I am not sure who is responsible although I suspect Intel chipset drivers. 
    USB 2 is fine BTW. All devices work correctly when plugged into USB 2 ports.
    From what I can tell, the entire USB 3 environment is a problematic P.O.S.
    If anyone has any ideas I am willing to try anything I have not already tried.
    Thanks,
    Michael Downs
    P.S.  Here is my system information. I have all the latest BIOS, updates, drivers and etc. for all devices.
    ASUS Maximus VI Formula w/ BIOS 1002
    Intel Core i7-4770K  BX80646I74770K      
    G.Skill Trident X 16GB (2 x 8GB) DDR3 2400 Model F3-2400C10D-16GTX
    Samsung 840 Pro 256GB  SSD Seagate Constellation CS ST3000NC002 3TB 7200 RPM 64MB
    EVGA GeForce GTX 760 ACX 2GB 256-bit GDDR5  
    Corsair Carbide Series 330R Mid-tower Case
    Corsair RM850 850W 80 Plus GOLD Certified
    Cooler Master Seidon 240M - Liquid CPU Water Cooler
    Pioneer 15X BD-R SATA Blu-ray Burner BDR-2208
    AFT PRO-57U All-in-one USB 3.0 5.25" Media Card Reader
    Then there is a similar system with the exact same USB 3 issues:
    Gigabyte - GA-Z77X-UP4TH
    Intel i7 3770K
    etc.
    mdd

    Hey, I hope this helps you out a bit... I have had the same issue on my Asus K55A notebook with Win8.1 Pro x64 from the beginning! Thru my extensive research I found something interesting and the possible cause to all this! What I found was that by design
    the xHCI Host Controller has virtual HS 2.0 Ports linked to the 3.0 Ports... Enabling compatibility with 2.0 devices ok... What happens is that the xHCI stack is unstable just like you say... The ONLY WAY I was able to fix the problem was by unlocking the
    UEFI/BIOS to allow me full access to USB Configurations... I had to disable 2 of the HS ports under the xHCI Controller since I have only 2x 3.0 ports... This allowed 3.0 devices to be enumerated correctly under the xHCI stack and 2.0 devices now were enumerated
    under the EHCI 2.0 stack... That's what worked in my case... I'm still digging around for more info about this issue because I find it so odd that no one discovered this when designing xHCI stacks and drivers at MS for Win8/8.1 x64... I hope I shed some light
    on this issue... Good luck and keep us posted!
    Hi, Sebastian. I have the same problem but i'm getting crazy trying to solve it. Can you help me to unlock the UEFI to access full USB config? and give me some suggestions on how to solve the problem?
    My mail is roquen(at)gamail(dot)com
    Thanks in advance!

  • USB Flash Drive Issue On iMac - 1.1 on iMac, 2.0 on any other Mac

    I have a Core i7 27" Late 2009 iMac.
    I just noticed this issue today.
    I have a couple of Patriot XPorter XT USB Flash drives that I use among my Macs to transfer big files around.
    Hooking one of the 8GB flash drives to my iMac, the one listed above, it shows the device operating at USB 1.1 speeds, whether it's in a powered hub, or one of the 4 USB ports in the back of the machine. This was odd, because this was the first time it had ever done this. I only noticed this due to the painfully slow transfer rate the Finder was reporting to me. Restarting the iMac, cold starting the iMac, resetting permissions, PRAM and SMC did nothing. I thought it was a bum drive.
    So I grabbed a 16GB flash drive (same brand and model family, different capacity) and it works perfectly fine on the iMac at USB 2.0 speeds. Hmm...
    So I boot the iMac into Win 7 Ultimate x64. Both drives are listed at USB 2.0 speeds. Something is definitely afoot here.
    To make sure I'm not losing my sanity, I grab my MacBook Pro and test the drives in there. Both drives are listed at USB 2.0 speeds.
    I then run to my Mac Pro. Both drives are listed at USB 2.0 speeds.
    Did something go wonky on my iMac?
    Machine specs (for comparison above)
    iMac 27" i7 2.8GHz - 16GB RAM
    MacBook Pro 15" Core 2 Duo 2.4GHz - 4GB RAM
    Mac Pro Xeon 2.66GHz - 12GB RAM

    I think that you are just running into a communication blip between the thumb drive and the controller for the USB ports on your iMac. It is obviously reading the 8 GB drive as older and slower and is assigning that lessor priority to the bus serving the drive.
    Have you tried attaching the drive directly to the iMac with no other device connected to a USB port? If it is the same, then I doubt there is anything that you can do, that is going to be the way the USB controller reads this thumb drive.

  • USB drive access issues when using Windows Backup Win7Pro

    I've run into a similar issue. I'm using an RD1000 USB drive which uses hard drives as removable media.  There's an alert which states "Windows backup  needs a CD/DVD or USB Drive to continue."  It then states I
    can continue the backup on the existing media or insert blank media.  By simply selecting Continue the backup will proceed but this interrupts the backup every night so the backup won't automatically run until that challenge is responded too.  I checked
    permissions and reloaded the MS windows driver for the drive.  I tried exFat and NTSF formats. Not sure how to force it to automatically proceed.  The backup is only a tenth of the size of the total available drive space. Any
    ideas?

    Checked this URL ?
    http://answers.microsoft.com/en-us/windows/forum/windows_7-system/insert-removable-mediawindows-backup-needs-cddvd/5bf0d5ed-ba9d-420e-8b19-b162eb285563
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • USB 2.0 issue with sleep mode--help!

    hey there,
    so i've searched this forum's board and found that it seems quite a few people have had issues with USB 2.0 and sleep mode on the mac. most of what i read, however, comes from people not being able to put the computer to sleep once new USB 2.0 cards or devices are installed. that is not the problemm I seem to be having, but is this:
    I recently purchased a Belkin USB 2.0 PCI card, and installed it on my MAC G4 tower. It seemed to work ok for a little while, but then i noticed that AFTER i put the computer to sleep, when it 'awakens' from slumber, it no longer reads the USB devices. if the device was plugged in prior to sleep mode, it sometimes reads ok. but if I try and plug in a new USB device, such as an iPod or flash drive, no dice. it doesn't mount on the Mac.
    I called Belkin tech support, and they were very helpful, but told me that the macs have had issues powering the USB PCI card once the computer is in sleep mode. they even directed me to an apple support page that has downloads that seem to address this, but they're for 10.0-10.0.4. I don't want to download that onto my mac (10.3.9) cuz im worried it might screw something up on my OS.
    I would LOVE a download link for a software updater for this if someone knows where it is, otherwise, I may have to return this thing to Belkin and go with a more mac-friendly brand. so im open to that possibility, too.
    any help would be GREATLY appreciated!!
    cheers,
    the quid pro
    Power Mac G4   Mac OS X (10.3.9)   Dual 1Ghz, 1.5 GB SDRAM

    I would either complain to Belkin for a fix if there is one or return the card and try a different one. You should not have the problem, but Belkin USB hubs and cards appear to have more problems like yours than other manufacturers' products.
    You might try Sonnet's Tango FW400/USB 2.0 multi-card, for example, or Firewire Direct's 6-port FW800/USB 2.0 card.
    You may also want to check this page for some user reports on related products.

  • Huawei E1762 USB Broadband connectivity issue in macbook pro 13" 2011:

    The Dongle is giving issues with Mac book Pro 13" Feb 2011. This is my first Mac and so i dont have idea if the same problem existed for other macbook pros. The speed drops to zero and sometimes it gets disconnected automatically. I also tried using the Mobile partner dashboard for the huawei E 1762 but it doesnt help.
    Is anyone facing the same problem? Please help as i have to travel a lot and using USB broadband is the only option.

    I have read some of the dongle firmware need to be upgrade, check with your ISP.
    Im using a E1550 3g dongle which after I have updated my MBP to 10.6.7, it didnt work at all. Called my ISP, use Vodafone program instead of Mobile partner, and it works great now.
    Hope this is helpful.

  • USB/FireWire Ports Issue

    So before I go into the apple store and ask for this computer to be repaired/replaced, I would like to see if anyone knows if something can be done about this issue I have pinpointed..
    Basically when I have more than a few USB/FireWire ports connected, one or more of the devices does not function properly. This has happened with two external hard drives - which should have no problem being connected simultaneously.. When I try to eject one of them, I receive a message stating that it cannot be ejected because one or more programs may be using it.. although all programs are closed, causing me to have to force eject..
    Also, I plug in one drive and open the other in finder to back it up, and all of the folders in the drive are suddenly empty.. nothing inside. I go to Get Info.. Zero KB.. I try ejecting, but receive the same message, so I force eject, plug it back in, and wala, all the files are back in the right place..
    This has also happened in the past when my cinema display and a printer were plugged in simultaneously.. the computer won't detect the USB of the cinema display -- which only means that the speakers of the display won't work + no brightness control from the keyboard.. so i let it slide.. but now with this external hard drive issue, i need to solve the problem..
    Thank you for reading..

    Same here. Since a few weeks, my MacPro ejects USB HDD's as soon as I write or read data on it.
    (no I haven't installed something new at this time and all HUB's and HDD's have their own power supply, and yes they have been exchanged, so its not a broken cable or so !!!!!!!!)
    After a reset of the NVRAM and PRAM its better for an hour or so, then starts to eject again.  I've seen a lot of communities with exact the same question, but never a solution for it. There is also nothing in the support tab of apple.
    Hope someone here can help me out or due to the fact that this is a AplleSupportCommunity, a Apple-Employee may starts to do his job and help this huge amount (I guess there are hundrets or tousand) of mac-user with exact the same problem....
    btw: don't agree with MACATTACK2010 that this is a hardware problem, cause there are a lot of people in the
            net that ask the same question with brandnew Hardware. I think it's an OS or an Update Bug, or may both.

  • W540 - USB Charging iPad Issue

    I have recently purchased a W540 and a Thinkpad Ultra Dock 135W. Is there a reason why none of the USB ports on either the laptop or dock can charge an iPad 2? I have tried them all and only get the message "Not Charging" on the iPad. I believe it is a power output issue but have no idea why and would have expected at least one USB port to be able to charge? I have the dock connected to permanent 240V power as well?? Help!!!

    The USB standard only allows a certain amount of power. Some manufacturers choose to ignore this upper limit and allow higher currents.
    There is however a workaround to it with an unofficial tool from Gigabyte:
    http://www.gigabyte.com/support-downloads/Utility.aspx?cg=2
    This was reported to work a while back, but I've never tried it myself. It may or may not still work on Haswell machines.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • T430s - general observations and USB 3.0 issue

    I got my T430s this week after a month. After unpacking I noticed some fingerprints on the lid and also on the display. So I assume the model was reworked, because from the regular manufacturing process I don't expect any fingerprints. However, it runs and did not yet bluescreen. Or perhaps the fingerprints are from wrapping or QA, who knows.
    It did not have the current BIOS 2.02. I didn't note down which version it had, but it was 1.13 or perhaps even 1.11. Is there an update history somehere? I really don't remember. But I don't think this indicates an old board. I can imagine that new BIOS versions are not immediately put into production. They might always wait some months to see if any compatibility problems arise.
    Package (ID) UEFI BIOS (BIOS ID) ECP (ECP ID) Rev. Issue Date
    2.02 (G7UJ04US) 2.02 (G7ET60WW) 1.09 (G7HT33WW) 01 2012/09/18
    1.14 (G7UJ03US) 1.14 (G7ET32WW) 1.08 (G7HT32WW) 01 2012/09/05
    1.13 (G7UJ02US) 1.13 (G7ET31WW) 1.08 (G7HT32WW) 01 2012/07/17
    1.11 (G7UJ01US) 1.11 (G7ET29WW) 1.05 (G7HT29WW) 01 2012/06/04
    Some general remarks:
    o the lid: when the lid is closed, my laptop has an oval gap in the middle between the lid and the base. it's perhaps 2-3mm wide. But I found pictures in internet that show the same, so I think it's intentionally. I remember mark_lenovo (?) stating in another thread it's for providing some resistance against pressure. And in fact, I can close the gap by putting some light pressure on the lid. I remember my old T81p got scratches on the screen when the keyboard rubbed against the screen during transportation. Perhaps they want to avoid something like this to happen.
    o the keyboard: I really like it, the chiclet keys are a pleasure to press down, but they should have switched CTRL and FN. I'm constantly hitting FN instead of CTRL.
    o the touch pad: I don't like the bumpy surface. The finger doesn't glide very well. I prefer the smooth pad of my latitude.
    o I made a clean install, so I don't have any of that preinstalled bloatware. I did not install any of the ThinkVantage tools except for system update, and even that proved almost useless, because it only downloads packages, but fails to install them. There's just a notification that installation failed. I could install all packages manually though. So I only use that thing as a downloader. But why all manufacturers give their packages names like g7uj04us.exe? Is it so difficult to use the name that says what it is and what version?
    o switching between Optimus and HD 4000 works like a charm
    o the laptop is very quiet, but I did not really put it under heavy load yet.
    o USB 3.0: I have an external USB 3.0 case (fantec), which works on all ports, but after installing the USB 3.0 drivers it refused working on the USB 3.0 port. It still works on the 2.0 port, but the info bubble even says this is an USB 3.0 device and would work faster on an USB 3.0 port. The USB 3.0 port still works with 2.0 devices. So either the fantec case or the drivers are crap.
    And I really would like to  have one USB port on the right side. When I sit in my chair, I place the laptop on my laps and then the plug in the back is always in the way or pressing against my leg. Not good, it could break.
    I think I will crosspost this in http://forum.notebookreview.com
    Moderator note: moved from off-topic thread.  Subject changed to match content.

    I'll be interested to see if yours develops the same battery calibration issue as we're seeing here: https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Serious-problem-of-thinkpad-T430s-battery/...

Maybe you are looking for