USB 3.0 Network Adapter Problem (StartTech)

Hello-
I periodically use a USB 3.0 Network adaptor for my Carbon X1 (It is the Startech USB31000S).
Our network policy is to disable WIFI when the adaptor is connected.
Frequently, when I disconnect the USB from the computer to move to a different location, the network adaptor hangs, the WIFI is not enabled. I need to reboot to get it working again.
I have updated all drivers (USB, Adapter, etc.).
Any suggestions?
Thanks.

http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=131
check this out... and use the latest driver...
best regards from Germany

Similar Messages

P35 Neo 2 network adapter problem

Hi, recently Ive experieced some problem with my integrated network adapter and Im no able to solve it on my own
My system is as follows
XP SP3
C2D E6750 @ 2.6 GHZ
MSI P35 Neo 2
4GB RAM DDR2
MSI NX 8800 GT
All was working fine but yesterday after updating to the new 185.85 Nvidia drivers and PhysX, my network adapter desappeared fron the network connection list. I tried to go back to the old 182.5 drivers but the SO didnt recognize the adapter. Also I looked into the BIOS but all seems OK
Now Im connected throw my Motorola SB5101i USB cablemodem as the Realtek 8111B adapter is not working anymore
Any help would be appreciated, thanks

Quote from: Hans on 10-May-09, 23:02:25
when a device is removed, the driver is stll installed. It will then show as hidden in Device Manager.
Uninstall the old driver:
- goto device manager and show hidden devices;
- point to the Realtek NIC -> right click and then Uninstall.
- Reboot. Two possibilities:
a. Windows will reinstall the driver after finding new hardware;
b. you will need to manually install the Realtek driver.
Either way, after this, you should have the NIC back.
Things have worsen I suppose. Something is badly screwed up here.
I tried to follow your advice but when I went into the devices manager I couldn't see the adapter even showing up hidden devices any more. I didn't change any settings, just turn off and start the PC a couple of times.
So I removed the drivers from add/remove programs but cant unistall the hardware as i cannot see it..
What should I do? thanks.

System.out.println and Network Adapter problem

Hello,
I am encountering a 2 strange problems. I have 2 oracle application server instances, one dev and one production.
The first problem is when I type System.out.println in the JSP's i am able to see the output in both \opmn\logs\oc4jinstance. But the System.out.println in the java classes or bean show up only in development logs but not in production box.
Is there a setting I am missing here?
The second problem is on our development machine the application works fine, but as soon as we deploy the application on production I encounter:
could not open new connection: Io exception: The Network Adapter could not establish the connection
I have a class called DBUtils, which uses a 3rd party library to get connections from the connection pool as below. Using JSP I call the getConnection(). On my dev Oracle Application Server Instance it works fine, but on production I get the error. Can it be there is a setting that I am missing on the production box?
When I use a JSP and connect to the database without using the DBUtil class. I can connect to the database fine. Also using the DBUtil class with production oracle IP address on the development machine lets me connect with no problem, but production machine does not let me.
public class DBUtils {
static ConnectionPoolBean pool;
static {
System.out.println("DBUtils() - before connection pool bean");
pool = new ConnectionPoolBean();
pool.setDriverClassName("oracle.jdbc.driver.OracleDriver");
pool.setdbURL("jdbc:oracle:thin:@IPADDRESS:PORT:SID");
pool.setUser("USERNAME");
pool.setPassword("PASSWORD");
pool.setInitialConnections(1);
pool.setIncrement(1);
pool.setSoftMaxConnections(40);
public static Connection getConnection() throws SQLException {
System.out.println("Getting Oracle Connection");
return pool.getConnection();
public static void returnConnection(Connection conn) throws SQLException {
System.out.println("Returning Connection");
pool.returnConnection(conn);
Thanks for your help in advance.

Hi
System.out.println is a method of PrintStream in IO which is used to print the output on console in java progs.Here in jsp ,the o/p is printed on server's console window.But out.println is totally different as, out is implicit object derived from JspWriter and is used sly to PrinWriter 's object is used in servlets.It's work is to write upon Browser.
System.out.println() is normally used in jsp for debugging purposes only.
Ashish

Satellite C55DT network adapter problems

I purchased this Toshiba Satellite C55DT-B5208 laptop for my husband late August this year. I've had two previous Toshiba laptops before and loved them, that's why I did not hesitate to purchase another Toshiba brand. I am a very technical person and I work in IT, so I am familiar with networking and computer hardware very well. We have a pretty robust home network. I recently upgraded our router to the ASUS AC68u Gigabit router, which also serves as our media server. All of our devices at home do not have any connection issues since I upgraded our router, so I know that when my husband's new Toshiba laptop keeps on disconnecting, it's is related to its network adapter, which is the Qualcomm Atheros AR956x. I tried all of the following solutions with no success:
1. Reinstalled the latest driver
2. Reset the BIOS
3. Changed the channel bandwidth of our router from 20MHz to 40MHz (this increased the speed of the adapter to the router from 72 Mbps to 150 Mbps, but the Internet is still extremely slow and websites wouldn't load most of the time.)
4. Used a WiFi analyzer to check what surrounding frequencies are interferring with the connection, but I found none.
5. Finally, I reset the computer to its factory settings (this seemed to work only for a few hours. The Internet seemed to run fine then started to do what it did before I did the reset).
I called the tech support for this since it is still under warranty, and I was told to send it in for repair. My husband needs a computer because he is now in school, and sending it in means he won't have any computer until he gets it back. Are there any other solutions I am missing? I was thinking of purchasing a replacement network card for it, but I am not sure what type of PCIe network card form factor it uses. I cannot find any information on what type of PCIe card it uses. Any information will be appreciated.

I have been having similar issues with this same model, purchased at best buy, for my wife. The wifi will suddenly seem to slow to a crawl, and eventually will not work at all. Though, it states it's connected, and there is a problem with the router connnecting to the internet. I have a standard Verizon issued MI424WR router that came with the services. I tried returning to factory settings, updatind drivers, BIOS, uninstalled antivirus, tried with different antivirus products, firewall settings, etc. Nothing. It seems that when the laptop is taken away from the router, a mere 25 feet or so, it loses connectivity, but insists it's connected to the router, and the router is the one having trouble, though 2 other machines on the same network (1 wifi, 1 ethernet) are experiencing no issues. Really this is just a bump, hopefully someone out there can figure this out.
Win 8.1
AMD A8-6410 APU with AMD Radeon R5 Graphics 2.0 ghz
6.00 GB RAM
HALP!
Caleb

NVIDIA Network Adapter problem (MSI K8N Neo4-F)

We have an MSI K8N Neo4- F motherboard. We are running Windowx XP SP2 (just upgraded to Service Pack 2). The computer will only boot in Normal mode if we disable or remove the NVIDIA Network Adapter driver. If we attempt to boot in Normal mode, it always ends with a Bad Pool Header problem (Blue Screen of Death). If we boot in Safe Mode with Networking, we can access the Internet. If we disable or remove the driver, then boot in normal mode, we can run in Normal mode but we do not have internet connection.
Does anyone know how we can use the onboard Network Adapter, and still boot in normal mode?
We have been using the latest drivers from MSI for this motherboard. Is there a different version that can be used? Is it possible that we have to update our BIOS for it to work correctly with SP2?
Thanks!

I think I may have misunderstood what you meant by a clean install. I probably should have asked what you meant before I answered my last post.
If you mean "did we just build the system by wiping the hard drive, installing XP SP1, then apply SP2", the answer is no. The system has been running Windows XP SP1 for several years without any problems, and we just wanted to upgrade to SP2 because there is some software that we want to load that requires SP2 to run. We have lots of software loaded on this machine that we use every day that we really want to avoid (short of time right now to tackle that project) rebuilding the entire operating system/machine because of the work involved in reloading all the software, etc.
Am I correct in assuming that we would have to wipe out the hard drive and start over if we did a re-install from a slipstreamed SP2 cd? If so, then we will probably just stay with SP1 for the time being if there is no other option to fix this Nvidia driver problem until we have more time to do a complete re-install and reload of the computer.
What about just installing a NIC in one of the PCI slots and use that instead of the onboard NetWork Adapter?
Thanks for all your help.

P35 Platinum - Intel PRO 1000 MT Network Adapter problem

Greetings.
Found out very strage thing - installation of "Intel PRO 1000 MT Network Adapter" in any PCI slot disabled onboard Intel raid controller! :(
If this card installed Intel Matrix Storage Manager screen do not appear in boot process and Raid do not listed in Boot Sequence bios options, instead
I can see Network Adapter in this list. I tryed "Boot from othe devices" option, bus it not work too.
So with this adapter installed I'm not able to boot from raid.
Currently I use bios version 1.4
Any idea how to solve this?
P.S. Installation of old 3COM 3C905CX-TX-M Adapter did not have such effect, but there is no Win x64 drivers for it.

Hi Maesus,
Thanks, I did and filled information about my computer configuration.
Hope it'll help solve the problem.
AaronYuri, thans go reply.
But maybe it's some misundestanding - when I say that installation of Intel adapter in PCI slot "disabled onboard Intel raid controllr" it does not mean that raid controller disabled in bios settings - settings in "Integrated Peripherals->On-chip ATA devices" are the same (PCI IDE BusMaster = Enabled, Raid mode = RAID), but it's looks like bios "did not see" raid controller - it disappers from list of devices to boot from and I did not see screen of Intel Matrix in boot proces (this screen alwais presents if controller switched in raid mode)

Network adapter problems! Help please!

I've been trying to fix my network adapter for a long time without succes. I can't use an ethernet cable anymore soon so i really need a solution fast!
My hardware id's are:
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C&REV_00
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C
PCI\VEN_1814&DEV_5390&CC_028000
PCI\VEN_1814&DEV_5390&CC_0280
I hope that's enough info.
Thanks in advance!

Hi:
I would need to know the full model # of your notebook in order to help you completely.
If you know the model number, go to the support and driver page, download and install the Ralink WLAN adapter driver which is the model card the hardware ID you posted is from.

Z87 g45 gaming network adapter problem

Hi,
I'm having issues with the board since this morning: can't connect to internet anymore, windows 7 tells me theres no drivers for the network adapter.
Can't find the network adapter in the devices list (checked the hidden device thingy).
huge thunderstorms yesterday so I suspect the thing just fried but everything else looks just fine.
So now I don't really know what to do, order a new network adapter?
Thanks for any help,

which network card? onboard or?
remove power cord from the PSU, then do >>Clear CMOS Guide<<
Quote from: etxebunti on 11-October-14, 22:13:22
Hi,
I'm having issues with the board since this morning: can't connect to internet anymore, windows 7 tells me theres no drivers for the network adapter.
Can't find the network adapter in the devices list (checked the hidden device thingy).
huge thunderstorms yesterday so I suspect the thing just fried but everything else looks just fine.
So now I don't really know what to do, order a new network adapter?
Thanks for any help,
sounds like network card is fried
Quote
So now I don't really know what to do, order a new network adapter?
if the above guess is correct, yes

Lan connection / network adapter problem after computer reset to factory

My computer was a bit over-run with malware (from kids downloading games I suspect...), so rather than keep fighting to remove some of the nastier ones, I just reset the computer to factory start with the disks we made. Windows 7 Home Premium 64 bit. Since that time, I cannot connect to the internet. It does not have a wireless adapter. The power supply and video card were upgraded a couple years ago; everything else is as it came from the factory. Since I cannot get online, I have not done any windows updates. When I go to Network and Sharing Center, it says "You are currently not connected to any networks" (duh) If I click on "change adapter settings" there is NOTHING in that window. When I look at "Device Manager" there is no group for "Network Adapters" in the list. I know very little about this stuff, but it seems like the computer is not recognizing that there is even an ethernet cord plugged in. There is of course, and when I plug that same cord into a different computer, it works. Looking under the hood, I see the network adapter is integrated.... So maybe that part is fried somehow, even though everything else seems to be working? It just seems really really odd that it was working before the software reset and now it isn't. Any advice?

As an update: I found the driver on this website. Downloaded it and then transferred to the subject computer. I tried to run it and got an error. "Original Realtek Networking Controller Driver" is at the top. "Your system does not meet the minimum requirement for this update. Update has been cancelled. (9996)" Could this be because it doesn't have other updates installed?

Using USB Network Adapter

I got a blu-ray player for Christmas, and it has a USB port. Can I use Qwest - Wireless-N USB 2.0 Network Adapter to connect to my wireless network set up with an Airport Extreme? Thanks!

Katherine Schmidt wrote:
I got a blu-ray player for Christmas, and it has a USB port. Can I use Qwest - Wireless-N USB 2.0 Network Adapter to connect to my wireless network set up with an Airport Extreme?
If your blu-ray player's USB port supports a Wi-Fi adapter, I'd guess it would work. You should check for that compatibility with the blu-ray vendor.

Upgrading from iTunes 10.4.1.10 to 10.5.3 on Windows 7 - network adapter is disabled

Hi all,
I tried upgrading to iTunes10.5 on a Windows 7 HP Elitebook 2530p and the result is that my Wi-Fi and Ethernet network adapters become disabled. In fact, they are effectively deinstalled - they simply disappear and I am unable to reinstall or use the Windows hardware installer to automatically find them and reinstall. I had to deinstall the iTunes upgrade and then restore my system back using the pre-install restore point- and the network adapter magically reappear! Noticed this issue seemed to be a known problem and discussed at length on these boards. Have not tried this update since ~Nov so perhaps it has now been corrected, but I didn't want to risk attempting again only to have to back out and waste more time. Can anyone confirm that the current 10.5.3 update fixes this network adapter problem on Windows 7 32-bit? Many thanks, Mark

I came upon the solution in another discussion thread. The solution is to simply wait 8 to 10 minutes on the language selection dialog box allow the install program time to find my OS 10.4.1.1.. I then clicked on "Continue" and the install proceeded without any problems. I know am running Leopard OS 10.5.8., So far with no cliches..."knock on wood". Thanks to all who responded to my original question.

Cannot use Ipod with my USB Network Adapter

it seems my PC can only recognize my ipod or my USB Network Adapter without the other. if i only have one plugged in it works fine. but if i plug in the 2nd 9order doesn't matter0 my PC can't recognize the 2nd one. plz help. i need to be able to use the internet and my ipod at the same time. and no it has never done this before until recently.
if u can or wish to IM me through MSN or AIM so we can discuses this
my msn and aim id is mistyshadow6969
ty everybody

had same problem. it seems to be a power issue with the usb ports when pc is plugged into a surge protector. try plugging pc directly into outlet then plug ipod into usb port. do a normal restart first. im at [email protected] let me know if it worked; it did for me. later

Using USB 2.0 Network Ethernet Adapter for sharing printer with 3 computers

Hi all,
Opposed to using a print server, can I use a USB 2.0 Network Ethernet Adapter to connect my Epson printer over my ethernet DSL router?
Thanks
Web dude

Yea, I thought about an adapter for the USB 2.0 port, but for a few bucks more, get the USB 3.0 adapter and be able to connect to Ethernet at Gigabit speeds!
Since Lenovo has not commented on the absence of an Ethernet port, I'm guessing that the slim height of the Yoga prevents it, unless you go to some funky slide-out module and connect at a 90 degree angle (which would be a worse design). I had an old Thinkpad (or Dell?) with that design, and they are intermittent and subject to being broken off.
Bundling in the Ethernet Adapter would have been a nice touch. Perhaps they were trying not to increase the Yoga's "above market" price further.

Using a network adapter multiple times problem

<Microsoft Network Adapter Multiplexor Driver(Team 1) is either part of more than one virual switch or added twice as part of a single team .Make sure the physica l network adapter is used only once > this is the problem that
is shown me
and still i cant able to identify the problem..
here is the hint of my digrram
3 host
each host: 2Nic + teamed + trunked(Team1)
(Virtual switch) for VM   and Connected to Logical Network
                Microsoft Network Adaptr Multiplexor driver (which is teamed of the 2Nic) conneted to Logical Network
                 1Nic for iscsi trunked
                 1Nic for iscsi trunked
So the problem is occur while am trying to create New Virtual switch thinking to create Connectivity between my host and Correct me in this point also.. i am in of need serious help of regarding steps of my progress..
thank u
alex

Hi Alex,
If you are using a standard virtual switch in SCVMM, then you should only need to add the multiplexor adapter to the virtual switch, do not add the physical adapters.
If you are using a logical switch then since VMM will create the team, its important that you do not team the two physical adapters in advance, instead you just add the two unteamed physical adapters directly to the logical switch and VMM will team
them automatically according to the settings specified in the port profile.
For the above to work you need to make sure the logical switch (in my case "Datacenter Switch") has the uplink mode set to "Team". The uplink port profile will also need to contain the desired teaming mode and load balancing algorithm.
Greg
Greg Cusanza [MSFT] --Posting is provided "AS IS" with no warranties, and confers no rights.

G4 Won't Boot after Tiger install and Belkin USB Network Adapter install.

I'm sure this would apply to my G5 as well.
I installed Tiger on my G4 and it restarted and opened to desktop. Great!
Next, installed software drivers from Belkin USB Network Adapter.
Restarted computer,
Screen has firmware 'like" look asking me to type mac_boot.
I do this and the next screen is all grey with two small purple folders in the corner. I believe one was flashing!
Nothing happens just stays there.
How can I get back to normal boot mode?

tigerswim, welcome to Apple Discussions.
Did you already have Tiger installed or did you have Panther 10.3 installed? Tiger is not a free upgrade; you have to buy it & then update (for free) using the download updates from Apple. Also, you have to use a universal/retail install DVD (or CDs) to install Tiger. You cannot use the install DVD from another model Mac.

USB 3.0 Network Adapter Problem (StartTech​)

Similar Messages

Maybe you are looking for

USB 3.0 Network Adapter Problem (StartTech)