USB 3.0 not detected in HP Pavilion H8-1030NL

I have a HP Pavilion H8-1030NL desktop, in which the two usb 3.0  are no longer detected after installing  windows 7 ( instead of 8, that was supplied with the PC ).
I checked and could not find the TI update that is mentioned on the forum, so that is probably not the problem.
I would really appreciate expert advise.
Thank you beforehand,
Rochus Zeevaarder
This question was solved.
View Solution.

Hi Jaco,
The  USB 3.0 gates are now detected.
Thanks for your help. I much appreciate it.
Best regards,
Rochus Zeevaarder

Similar Messages

  • Connected usb driver is not detected in window 8.1

    hey .....
     HP 250 G3 notebook
    connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version  F.22 .... so plsss...fix this problem......

    @jeet2113 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Webcam not detected on HP Pavilion 17-e053ca, Bilingual Notebook

    Im using the HP Pavilion 17-e053ca, Bilingual Notebook and I recently noticed I cannot use my webcam anymore.
    I opened Skype one day and couldnt video call.
    Re-Installed the drivers from the official website http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=6550​...
    but to no avail,webcam still not working. Even YouCam say Webcam not detected.
    Im running Windows 8 Build 9200. NB It had been working all this time.
    In Device Manager under USB controllers there is a device that says : Unknown USB Device (Set Address Failed)

    Hello Manny264,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Why is my USB DAQ device not detected by Windows?

    Hello,
    I had my USB-6229 connected to my PC (Windows 7 64bit) this morning and everything was fine: Windows detected the device, the device showed up on on NI MAX, and testing through NI MAX was successful. I then installed the NI DAQmx 9.8 driver to replace the NI DAQmx 9.6 driver that I was using (the DAQ Assistant icon in my functions menu in LabVIEW 2013 was not present, and this upgrade fixed that issue). Unfortunately, Windows now no longer recognizes the same DAQ device that worked earlier this morning.
    Here's what I've tried so far:
    Uninstalling the 9.8 driver and re-installing the 9.6
    Tested another USB DAQ device; Windows could not detect it either
    None of the DAQ devices register on WIndows's device manager (usb ports not broken, as the flash drives I inserted showed up on device manager)
    As expected, none of the devices show up on NI MAX
    Does anyone have any suggestions on what may have happened when I upgraded from the 9.6 driver to the 9.8?

    Thanks for your reply, Philip. Yes, I did reboot my computer after installing the driver.
    I contacted NI support, and we were unable to reach a solution, so, as a last effort, re-installed the driver for the third time, which finally worked. I'm not sure what the problem was, but here are some extra steps I took before re-installing the driver that may benefit those who encounter a similar problem:
    1. As Philip mentioned, start the NI Device Loader if it has not been started or stop/start it if it has. The startup status ought to be set to "automatic." You can find the NI Device Loader by starting Task Manager, selecting the "Services" tab, then selecting the "Services" button. Scroll down the list until you find it.
    2. Open up Device Manager and search for your device (mine was labeled as "unidentifiable"). Right click and select "Properties." Select the "Driver" tab. You may need to manually select the driver folder, which should be located in C:\Windows\system32\DRIVERS.
    Hope that helps.

  • USB hard drive not detected on reboot

    I am running Windows 7 Ulitmate 64-bit on my 2011 15" Macbook Pro. I have a USB Hard Drive (WD My Passport SE - USB 3.0/2.0 - 1 TB).
    The hard drive is formatted for HFS+ and I am running Mac Drive 8 to detect it in Windows.
    For some reason when I reboot (in Windows), the hard drive won't be there until I unplug it and plug it back in.
    This is really annoying! Can anybody help me? I'm pretty good with things like this but I can't think of any reason this shouldn't be working right.
    HELP =T
    Message was edited by: PTHEOFYL
    Message was edited by: PTHEOFYL

    I am having the exact same problem. WD 1TB Passport. USB 3.0 drive. Running on Windows 7 Pro 64 via Bootcamp.
    My 1TB Passport is formatted with FAT32 and works with Windows and Mac OS.
    I was getting the same problem when I was running Windows XP Pro on the same MacBook Pro. I was hoping the upgrade to Windows 7 would remidy the issue but it did not.
    The drive light is on in a steady state when I boot and I have the same symptoms as reported by everyone else above.
    In my research, I am leaning towards thinking that it is a power issue related to the cable used to connect the USB 3.0 Drive or something to do with the USB driver for Bootcamp, but researching the WD site suggests it's a power issue, not a faulty or failing drive.
    I have a 500GB WD Passport USB 2.0 also attached to my computer, also running FAT32 and it starts up no problem. It's just the USB 3.0 drive that is having this issue.
    Also worth noting; the drive is detected properly when I boot in Mac OS X. It's only the Windows side I have to unplug and plug back in to access the drive.

  • USB Flash Drive not detected after OS X Mountain Lion installed.

    My MacBook Air 11 inch (Mid 2011) suddenly stopped detecting all my USB flash drives a week after upgraded to Mountain Lion.
    I have a tiny 16GB USB flash drive (Sandisk Cruzer Fit), for daily work, that has never been unplugged from my MBA.
    Everything was fine on Lion, and a week of Mountain Lion, until just when my MBA prompted me that my flash drive "was not ejected properly" after I re-opened the display/lid, or from sleep mode.
    I thought I might have accidentally removed the flash drive unknowingly. So I tried re-plugging the flash drive, closed and re-opened the MBA lid, and the same error message "The disk was not ejected properly" occured. I repeated the steps for a few times (thinking my flash drive might be faulty) and at my last attempt, the flash drive was stopped detected. I tried several USB flash drives and external hard drives (of various brands) to both the USB ports of my MBA, only the external hard drives were detected (on both USB ports) and functioning. None of the flash drives was detected on either USB port.
    The tested flash drives were plugged to another 13" MacBook (Unibody, Late 2008, OS X Lion) and they all worked fine.
    I wonder if anyone faces the same problem, and solution(s) please?
    Additional: OS X Mountain Lion re-installed and same problem occurs / No problem with OS X Lion.

    I had the same issue after installing Mountain Lion from the App store. The issue is you are missing the IOUSBFamily.kext extension amongst others. The solution is to backup your macbook, then perform a clean install of Mountain Lion.
    I had this done at the Apple Store and now everything is restored as well as performance speed being improved.
    Note: When restoring your files (a clean install will delete all your files and applications), use the Migration Assistant.
    I would recommend going to the Apple Store to do this because they can perform the clean install from a USB which is so much faster than the download form the App store.
    Hope this helps.

  • USB MIDI devices not detected under OS 10.5.2

    Leopard's Audio Midi Configuration doesn't detect my Korg microKontrol, Novation Remote Zero SL and my Evolution MK-249C2 MIDI keyboard. Firewire MIDI device is detected (RME fireface 800).
    Using the "latest" drivers - Novation Automap Universal 2.0.1178 driver, microKontrol 1.0.7 driver, Evolution keyboard doesn't need a driver.
    installed Leopard yesterday, but I think I'll switch back to Tiger...

    USB Hub was faulty!

  • USB MIDI devices not detected (3 out of 4)

    Leopard's Audio Midi Configuration doesn't detect the Korg microKontrol, Novation Remote Zero SL and Evolution MK-249C2 MIDI keyboard. Firewire MIDI device is detected (RME fireface 800).
    Using the "latest" drivers - Novation Automap Universal 2.0.1178 driver, microKontrol driver is pre-Leopard, Evolution keyboard doesn't need a driver.

    USB Hub was faulty!

  • U400 both right side usb ports are not detecting logitech mouse or keyboard

    PLease HELP!!

    Hello jounin85 and welcome to community,
    Kindly unplug all USB devices connected to the USB port then go to device manager and uninstall all USB drivers
    Download the USB driver and install it.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HP TrueVision HD webcam not detected on my Pavilion DV7

     Okay, When I got this thing a year and a half ago, the webcam wouldn't work turns out that I had to send it in to get fixed. not a problem it was still under warranty. took 2 days it came back every thing was fine. now I don't use it often, so I didn't notice that it had quit working until about 2 weeks ago. now it's not in warranty. every thing seems to be fine, I uninstalled the software and reinstalled it( youcam 3.0) as per hp instructions. The software appears to be in proper order , but the cam still don't work . I also found out that scaner on my HP all - in - one don't work either. any ideas as to why this is , or how to fix it. and also are these two linked in some way??

    Hi,
    Please use this to fix:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&lc=en&cc=us&dlc=en     
    Links for XP & Vista are in there too.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp Pavilion DV4-1235ee No sound & Usb port not detecting.

    In my laptop Hp Pavilion dv4-1235ee there is no sound coming from the internal speakers. If I connect external speaker its works fine. Usb port is not detecting now. any help will be appreciated.

    What is the current Operating system on your notebook? I suspect we have issue with internal speaker on hand...but would like to reinstall the Audio Driver and check...
    Again for the USB, we can try and install Chipset driver and check...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Usb not detected in windows 8.1

    Hi,
    First of all thank you. I am happy with your customer support. I had a problem with the unresponsive screen in my HP OMNI 10 which has been solved now.
    Now i am facing a new problem with the USB. I have tried all the possible methods but i am not able to find a solution.
    My USB drive is not detected whereas SD card is detected. I also ran a component test which showed failed.
    Please help me out.
    Thank You.

    Hey @varun_viswanath ,
    Welcome back to the HP Forums!
    I see your USB is not being detected by your Omni 10 tablet.
    Can you tell me which drive you are connecting (make, model, and size please) and which OTG cable you are using for this?
    It would also help to know which Omni 10 tablet you have. You can see here for how to find the model: Locating the HP Omni 10 Tablet model number.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Usb not detected on post

    Does anyone have this problem whereby your usb devices are not detected by the system during post? the only way to get it recognized is by quickly unplugging and plugging back in when the reset button is pressed.

    Core i7 Ivy Bridge i7-3770K 100 3.50 1M 8M E1 77 7751vA3.zip
    http://www.msi.com/product/mb/Z77A-GD65.html#/?div=BIOS
    >>Use the MSI HQ Forum USB flasher<<
    For full support you will need to update anyway, so might want to start there.
    Make sure to re-install all of the intel drivers when you are done.
    Edit: They just released a new full release so that is probably your best bet.

  • OSX ni-daqmx base does not detect USB-6216

    USB-6216 is not detected on macbook pro retina late 2012 with NIDAQMX base installed even though the board is listed as supported.
    Other boards (i.e. USB-6008) work. The 6216 works prefectly using win7 in a virtual machine on the same macbook; when the wirtual machine is on max asks whe the borad has to be connected and answering win TWO devices are connected to win (i.e. Firmware loader and 6216)
    If the virtual machine is off nothing is asked, however,  when 6008 is connected its led starts blinking, while nothing happens on the 6216.
    A listing of the USB devices in the case of 6216 shows:
    USB Hi-Speed Bus:
          Host Controller Location: Built-in USB
          Host Controller Driver: AppleUSBEHCI
          PCI Device ID: 0x1e2d
          PCI Revision ID: 0x0004
          PCI Vendor ID: 0x8086
          Bus Number: 0x1a
            Hub:
              Product ID: 0x0024
              Vendor ID: 0x8087  (Intel Corporation)
              Version: 0.00
              Speed: Up to 480 Mb/sec
              Location ID: 0x1a100000 / 2
              Current Available (mA): 500
              Current Required (mA): 0
              Sleep current (mA): 0
                Vendor-Specific Device:
                  Product ID: 0x7269
                  Vendor ID: 0x3923  (National Instruments)
                  Version: 0.00
                  Speed: Up to 480 Mb/sec
                  Location ID: 0x1a120000 / 4
                  Current Available (mA): 500
                  Current Required (mA): 100
    while in the case of 6008 shows
     USB 3.0 Hi-Speed Bus:
          Host Controller Location: Built-in USB
          Host Controller Driver: AppleUSBXHCI
          PCI Device ID: 0x1e31
          PCI Revision ID: 0x0004
          PCI Vendor ID: 0x8086
          Bus Number: 0x14
            NI USB-6008:
              Product ID: 0x717a
              Vendor ID: 0x3923  (National Instruments)
              Version: 1.03
              Serial Number: 0130C6E2
              Speed: Up to 12 Mb/sec
              Manufacturer: National Instruments
              Location ID: 0x14200000 / 17
              Current Available (mA): 500
              Current Required (mA): 500
    Anyone may help?
    Thanks

    Dear Cindy,
    many thanks for your replay. I think it will be quite useful.
    I should have the last driver revision (downloade one week ago...) and the board is a screw type. I have not checked it on another mac, but I will try to find one.
    The part on the lsdaq is the most interesting for me: my lsdaq shows no boards at all (it shows something similar if I connect a 6008 board so it is working), but the mac detects an USB device (listed as vendor specific) as:
     Vendor-Specific Device:
                  Product ID: 0x7269
                  Vendor ID: 0x3923  (National Instruments)
                  Version: 0.00
                  Speed: Up to 480 Mb/sec
                  Location ID: 0x1d110000 / 6
                  Current Available (mA): 500
                  Current Required (mA): 100
    As you see the product id is different. I suspect the problem is in the board firmware: when I connect the board and the win virtual machine is on, parellels asks me if I want to route the board to win. If I say yes after few seconds it asks if I want to route a second device which is labeled as 6216. It seem the board starts presenting one device and then it 'boots' a second device only after some driver operation.
    May I ask you to check the board firmware using FWUpdate.app located in /Application/NI-DAQMx Base/bin/ ?
    I contacted NI and maybe this can help them. When did you buy the board? Can you read the product id on the back of your board?
    Many thanks again
    Marco
     

  • FRONT PANEL USB 3 PORTS NOT WORKING.

    I have just had a new ASROCK motherboard fitted to my HP Pavilion base unit as it failed after only eighteen months & even though everything is connected correctly my USB devices are not detected when plugged in. The USB 3 ports are the original HP Pavillion ports & cable configuration & plugged into the new ASROCK board.
    Specs:-
    ASROCK Motherboard: H61M-DG3/USB3. http://www.asrock.com/mb/Intel/H61M-DG3USB3/?cat=Specif...
    HP Pavilion 500-081ea base unit: http://support.hp.com/gb-en/product/HP-Pavilion-500-000...
    I running Windows 8.1 Pro 64 bit.
    Can anyone please help?

    Those should be fixed with a chipset driver, which is packaged in the HP graphics driver. Did you install that yet? Don‘t do express install, but rather the custom install and check everything.

Maybe you are looking for