USB 551L wont update firmware correctly. VZW tech plz help!

Ok, so when i go to update my usb 551l, this is what occurs, http://i1111.photobucket.com/albums/h461/Terry_Horgan/Capture-20.png
I have tried everything, my device is not updated to the current firmware, and this program will not open to do it either. Please help get this fixed. It should update it, I have done it before on a different computer, right after a fresh restore.
PLEASE!

My 551L connection reliability was so bad I could not complete the firmware download so I took it to my local Verizon phone store. They did the latest (1.48 4/30/2012) upgrade. Do not expect any improvements. This thing remains an unstable piece of junk regardless of the firmware version.

Similar Messages

  • Ipod wont update to itunes!! plz help

    hi all,
    okay, my ipod connects to itunes and starts charging, but it wont actually go into itunes, like in the sources list. So i just dont know what to do, becuase it connects with the do not disconnect thing like it usually does, but now it doesnt go into itunes in the source list, so i cant update the music on my ipod! is there anything i can do?!? Thanks!
    Chels'
        dont worry, be happy

    Also:
    If you don't have access to a computer
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.

  • Itunes wont update firmware on i phone

    itunes wont update firmware on ihpone 3g running 4.2.1 version

    Connect iPhone to syncing computer using USB cable.
    Start iTunes on syncing computer.
    Follow prompts from iTunes to upgrade.

  • Rebuild screen freeze - unable to update firmware as not docking. Help please

    Hello, I've got an 8gb Zen.
    Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
    Ran scandisk on it - no joy.
    Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
    Any help appreciated. Thank you

    QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
    My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
    If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

  • After updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

    after updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

    Reset your iPhone.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    If you continue to have issues, try downloading the apps to iTunes on your computer, then sync your iPhone using iTunes.

  • My iphone won`t activate after updating to ios 5.1 plz help

    my iphone 3gs won`t activate after updating to ios 5.1 plz help

    I got mine sorted. Turns out because i got it unlocked the first time getting updates via itunes causes it to restart again. Had to get it unlocked at managed to get eveything back after restoring it from itunes. Very happy cause the guy in the apple shop told me i had to call apple and pay 35euro just to talk to them! I manged to get it unlocked for only 20 and its just like it was.
    hope you're able to get yours sorted

  • When the iPhone 4 with IOS 5 is connected by cable to iTunes and check for update results in Error 1630. plz help me

    When the iPhone 4 with IOS 5 is  connected by cable to iTunes and check for update results in Error 1630, plz help me to update plz

    My Iphone 4 crashed yesterday after a restart and upload of OS 5.0, it will only partially sync.  It's not transferring any of my music or ringtones.  They still appear when I click open the sync screens on ITunes, but I don't seem to have an Ipod function and only one of my personalized ringtones transfers on the actual phone.

  • Hi everyone, I have a computer linked to my iPAD through itunes.  Then my Computer crashed and had to get  a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP :(

    Hi everyone, I have a computer linked to my iPAD through itunes.  Then my Computer crashed and had to get  a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP

    what do you mean the old computers link?
    my ipad is sycned with my computer but nowhere is there a link
    and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer

  • My ipod wont work with my ihome anymore plz help

    my ipod sounds fine with the headphones and with other speakers, but as soon as i put it on my ihome it wont work, yet it still will charge on there it just wont play music. plz help!

    do you have the conncetion right..because i have a ipod and iwake so the speakers might of gone bad..i am not sure but try plugging a cd player or something in the back of the ihome

  • I Can't update Nokia 5800 Xpress Music --plz help

    Hay all ,,
    plz help me
    I can't use Nokia software updater to update my phone
    Nokia 5800 Xpress Music
    I want to update it with my Pc
    Not by Phone
    That's the error massage
    http://i47.tinypic.com/16c508g.jpg
    PLz help me
    My FW is 11 !!!!

    What operating system are you using on your PC and what version of the software updater?
    If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

  • Ipod Nano wont update firmware

    Hello,
    I have a dialup connection and although, I can download video content, and the new apple itunes 7.3, I have not been able to get my ipod nano to update the firmware version from 1.1.2 to 1.1.3.
    I will either get kicked out during download, or get an error message related to verification of the file.
    Is there a separate way to download the file directly, or do I have to use itunes.
    thanks
    PC running window$   Windows XP Pro  

    In the restore instructions it says that you need to plug the iPod into a power adaptor during the second stage.
    Not really.
    Actually it says,
    "iTunes will present one of two messages on screen with instructions specific to the iPod model you are restoring.
    * Restore Instruction 1: Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    * Restore Instruction 2: Leave iPod connected to computer to complete restore (typically applies newer iPod models)."
    You will get Restore Instruction 2.

  • N70 Wont update firmware :(

    Hi all.
    Is anyone else having trouble updating their N70?
    When i try to use the software it says im already running the most up to date version of the firmware however people in other threads are saying they have considerably higher version than mine.
    My fone says it is...
    V 3.0546.2.3
    18-11-05
    RM-84
    My code is 0529237
    Before i tried to update i downloaded and installed the latest versions of PC Suite, Cable Driver and NSU.
    Is there anyway to manually download/update my fones firmware?
    Any ideas/help much appreciated.
    Thanks in advance,
    Dave

    Nokia is the one who builds new firmware based on operator requests, but Nokia cannot distribute it before operator (in this case O2) has approved it. Without knowing specifically what is the issue in your phone I would suggest you to be in contact with local Nokia Service Point or to your operator to check if there is newer fw available that way. If no success, I'd suggest you keep bugging the operator, so they will either approve new fw or pressure Nokia to make new one... (dunno which one is the case here)BTW, have you tried to call or email to Nokia Care? They may be able to help you fixing your issue even if there is no new fw available.
    Unfortunately there is no way to manually update your phone fw. If you try to do some 'experiments', you may end up into situation where you lose the warranty, or in worst case - dead phone.

  • My K8n neo2 wont overclock at all!! plz help...

    Hi, I just build my new machine, and after much problems I finally have it up and running at stocks speeds just fine, the problem is that I spent a lot of money buying Top-Brand components so I could overclock a lot, (I like It) but I cant seem to go upweard of 205FSB!! anything above that and the board wont boot at all forcing me to clear the Cmos!! I find this completely unaceptable for this board, being that my last board (an Msi one with nforce2) could overclock and athlon XP 2500+ barton all the way up to a 2800+!! Im really dissapointed at this, if someone could give me a few pointers as to what tweak in the bios (Im using 1.3 right now) it will be very thankful!!  ok, my specs are below, thanks!!
    Athlon64 3500+ socket 939
    Msi k8N Neo2 Platinum with 1.3bios
    2+512mb Crucial Ballistix pc3200 cl2
    BFG Nvidia Geforce 6800Gt
    36gb Raptor Hdd
    Enermax 420W power supply
    Thanks!!!

    I think your problem is your power supply. Check what that MAX amp on your 12V rail.
    I have nearly the exact same setup as you do and was unable to overclock the memory without lowering the memory timings much earlier than I expected too. For me I'm able to raise my FSB up to 207 at 2-2-2 timings. The max overclock I achieved was 220 X11 at 2.5-3-3 for a speed of 2420mghz. But it was not completly stable (it would bout but would lock up while gamming).  I had expected much better results than this... I bought good memory (Ballistix pc4000) I had a good 480W power supply... my processors ceilling should be around 2.6ghz. After reading this review on Anand Tech I think I found the answer... Athlon 64 Memory: Rewriting the Rules
    On page 10 they make the remark that their Antec True Power 465W power suply was limiting their ability to overclock memory.... The Antec True Power is rated to supply 22A on the 12v rail. My power supply is only rated to supply 18A.  I bet your 420W is rated even less.
    After reading that I fiddled with async overclocking and was stable up to 230FSB... then my hard drive freaked out... I was using sata port 1. I moved the hard drive to SATA port 4, but haven't tried much overclocking since.  Maybe if they put out a bios revision that I can adjust the HT on I'll try again. Until them I'm settled for running at 2277mghz.

  • AD user revoked after sending updates for an exisiting user (Plz Help)

    Hi
    One of the exsisting user AD user resource got revoked during his manager name got updated. In design console this event revceived and Linked correctly. But the same time i found some of the  task also  executed as below .
    (1)  User nust change password at next logon updated  = status (cancelled) with Response (AD Set property updated) and  Response description (User property has been updated)
    (2) Add user to Group =  status (cancelled) with response  (AD Add user to group operation successful) and Response description ( User has been added to group)
    (3) Move user to correct OU = status (cancelled) with response  (0)  and Response description (0)
    (4) Password never expires updated = status (cancelled) with response   (AD Set property updated) and  Response description (User property has been updated)
    (5) Account Expiration date updated = status (cancelled) with response  (AD Set user expiration date success) and Response description (Set User Expiration date successful)
    (6) create user = status (cancelled) with response   (AD User creation successful)  and Response description (User has been created)
    (7) Add admin user to lookup user = status (cancelled) with response  (FAILURE) and Response description (Not Required)
    (8) Get Object GUID created = status (cancelled)
    (9) Delete user =  status (completed) with response (AD User already deleted) and Response description (User is Already Deleted from Target System )
    (10) Execute remote script
    (11) system validation
    Same time for other user these manager name change went through and all looks fine. Only one user AD user got revoked and Delete user task got triggered.
    Could some please help me to point out why this AD user status chnaged to revoked?

    Hi,
    <i>>>>target host: ??? where can I find this</i>
    Your R/3 host number you can find System->Status
    <i>>>>service number: ?? where can I find this</i>
    You can find in SMICM in services
    <i>>>>user name: this user suppossed to be from R/3 or XI?,
    passwrod; proper password
    logon client: the client supposed to be of R/3 or XI?</i>
    R/3 logon details.
    Thanks,
    Prakash

  • Itunes wont install on new laptop..Plz HELP!!!

    Going absoluteily crazy here.. I have anew Asus laptop (64bit) Windows 7 and it will not install Itunes.. I'm using Firefox and the file downloads from the apple site but when  going to install it says Security warning, Publisher could not be verified.. I click on run anyway because i know it's from the apple site but then absolutely nothing happens.. I'm not very tech minded when it comes to computers and i'm at a total loss of what to do.. Can somneone please help??????

    Tried that.. After downloading the file it said file was unsafe and wouldn't install.. Never come across a problem like this before!!

Maybe you are looking for