USB adaptor problem. HELP!

I have a USB adaptor for the new iPad but when I plug in the USB it says its unable to support because it requires too much power, why? it takes too much power to support, why?

Is it the camera connection kit (with nothing plugged in) that requires too much power, or a USB device plugged into the CCK that requires too much power?
If the former, it's not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Similar Messages

  • USB port problems: Help welcomed.

    When plugging any of my iPods into the computer via the USB port, I receive no reaction.
    A half-way full battery becomes frozen on the iPod and that is the absolute only reaction I get get.
    I've tried using different USB ports on this computer and have even switched the cables I was connecting with to no avail.
    My iPods can all be charged using the wall charger. It is almost as if the computer is not recognizing the cable.
    That said, I have had iPods for quite sometime (my first was a 20GB) and have never been faced with this problem before.
    All help is appreciated!

    There are various things you can try depending on whether you use a Mac or Windows.
    However, you've left out this info.

  • Usb key problem help

    I get a new problem with my usb key, since 2 month i didn't use it, today i plug in and no appearance on the deck,. I check system profiler and the key was detected but no presence on the deck.
    I bought a new one 1 GB (dane-elec) and same problem as the old one.
    What could be the problem? and what shall i do?

    Perform SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Z77A-G43 USB Plug problems [HELP]

    Board: MSI Z77A-G43 LGA 1150
    Bios: Version 04.06.05
    VGA: GIGABYTE 660GTX
    PSU: Dazumba 230Vac 50Hz 6A
    Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz (4 CPUs), ~3.0GHz
    MEM: 6144 MB RAM
    HDD : SATA 1TB
    OS: Windows 7 Ultimate 64bit
    Hello i got a problem where my usb plug always stopped working for no reason
    when i boot my PC , everything is fine and about 15-30 (sometimes more than 1 hour)
    everything is stopped (Mouse , Keyboard , USB Microphone) BUT the Monitor and the Speaker works fine and it is still working
    this is really annoying for me when i playing a game and my mouse got stuck and i have to restart my PC
    and also i have an electricity problem in my house the voltage is unstable so i have to use stabilizer
    is my motherboard affected by the electricity or what? idk i'm really really new at thing like this and do i need to change my PSU / Stabilizer
    Thank you

    Quote from: Sea Dog on 19-July-14, 03:49:49
    Could you provide more details about the PSU? Wattage rating and the amp rating on the +12V rail(s). Also, what is the current BIOS version? Why 6GB RAM? Are you using 3 sticks? If so, that is known to be counterproductive and has shown performance hits in that configuration in benchtests. Use just 2 RAM sticks in dual channel placed in the proper DIMM slots.
    PSU : 600W , +12v1 , 10.35A (Pic below if you want to see it clearly)
    BIOS : American Megatrends Inc. V2.12, 11/1/2013
    why 6GB? back then i could only buy 6gb because i don't have enough money lol
    and i really really need it because it was urgent and i dont use 3 sticks only 2 sticks

  • Ipod mini USB power problem HELP!

    everytime I plug my ipod mini in to the usb port I get this message: This USB device can not opperate because it needs more power than is availible.
    I have tried plugging it into another USB port but I get the same message.
    Our Imac likes my mums ipod shuffle just not my mini. any suggestions?

    Maybe there's something wrong with your USB cable? Have you tried connecting your iPod with a different cable?

  • Voyager 1055 USB Wireless adaptor problems

    I have just had a new broadband installation, with a HH3. I am changing over from an old 8Mb broadband on a different line which has a Netgear router on it. I have 3 similar Compaq PCs, 3 Iphone/iPods, and a Mac, and connected my work laptop OK to the HH3.
    The 3 PCs, 1 has a Netgear WG111v2 USP wireless adaptor which has connected OK to the HH3. The other 2 have BT Voyager 1055 USB adaptors, neither of which can see the HH3 but connect OK to the Netgear. The PC with the Netgear and one of the Voyagers are in the same room, about 4 feet apart, yet using inSSIDer2, I can see about a dozen wireless networks from all of mine and my neighbours connections, the PC 4 feet away can see only the Netgear and the Openzone from the HH3. I've switched off the Netgear, changed channels on both, reloaded drivers for the Voyager, and it makes no difference.
    Is there an issue with the Voyager 1055 that stops it seeing some networks? I've tried everything I can think of, but my last ditch effort will be to switch the routers and put the Netgear on the new broadband. The old broadband will be ceased eventually.
    Thanks
    Solved!
    Go to Solution.

    The Voyager 1055 is a bit dated now and was originally intended for use with the BT Voyager wireless routers.
    There have not been any driver updates since it was first issued.
    I have one, and it does not like WPA2 encryption or mixed b/g/n wireless speeds.
    If you set the hub3 to use b/g only and WPA only, it should work.
    I have TP-link wireless access point and I had to use those settings to allow the 1055 to connect.
    In the end I stopped using the 1055 and used a TP-link TL-WN722N USB adapter, which also does wireless N and has an external detachable aerial.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick.  Can anyone help? Thank you

    I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick.  Can anyone help? Thank you

    You need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them. But a lot of USB memory sticks need more power than is supplied to the kit, so you may need a powered hub between it and kit.

  • After update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

    after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help 

    Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone

  • I charged my iPod4th gen then my usb adaptor sparks and my room smells like rubber... is there anything wrong? this happened twice.. the the usb adaptor is no longer functioning.. :) pls help!!!

    I charged my iPod4th gen then my usb adaptor sparks and my room smells like rubber... is there anything wrong? this happened twice.. the the usb adaptor is no longer functioning.. pls help!!!

    - Does the USB port work for other devices?
    - I do not know what you meanby USB adopter
    - Make an appointment at the Genius Bar of an Apple store. Bring the "USB adopter" too.
      Apple Retail Store - Genius Bar                 

  • Anyone can help me about the driver of USB adaptor CB2

    Dears,
    I have lost the driver of 'creative' USB adaptor, in which made my USB not work, can anyone give me the link to download the driver?, please.
    beautykey

    @OP: there is no content in your message, it's just begging. The title
    of your topic contains two more or less informative words "PARSING codes".
    My question to you is: what exactly do you mean by "PARSING" and
    "codes"? Parsing context free (programming) languages? I guess
    you're not talking natural languages here because your project should
    just take a week to complete. Care to elaborate?
    kind regards,
    Jos
    ps. and why "PARSING" instead of "parsing"?

  • FireWire to USB adaptor

    Hello again. I posted earlier about problems with connecting a FireWire external HD to my new MBA, which only has USB ports. I searched some but couldn't really find a FireWire to USB adaptor cable although I read that they may have them at best buy.
    Has anyone purchased such a cable for Mac and, if so, could you tell me who made it and where you purchased it.
    Thanks for any help.

    OK, thanks. I did a lot of time researching and found some articles indicating that a couple of cable-making companies made such a thing (i.e., sima and tripp lite). Upon searching their sites and sending emails, neither of them sold such a product. I've read through my search that Apple may be eventually coming up with such a cable but who knows.
    here is my issue, however, in case either of you have thoughts on this. I just posted it on the ti book forum:
    hi there. I have my Itunes library downloaded on my ti book g4. I want to transfer it to the new macbook air I just purchased. How would I go about doing this? Could I just buy a usb cable and hook them up and use the ti book as an external drive or would it be more involved due to having different versions of usb (i.e., 2.0 usb on air and ? on the 7 year old ti book). The external drive I have only has firewire and I can't find a firewire-usb cable anywhere. If I could, then I'd just connect the external hd to my new mac air and do the transfer.
    Any help would be appreciated.
    So, maybe I've got a 'work-around' here but have questions about whether an old ti g4 powerbook and mac air could connect some way.
    Any advice would be appreciated.
    thank you

  • Recommend a wireless USB adaptor that is Mac compatible?

    As I really need my MacBook to see wifi networks and not being able to wait to see if 10.5.3 fixes up the airport problems I was wondering if anyone has used and can recommend a wireless USB adaptor?
    Thanks for any help
    mark

    I haven't used it, but it is sold by a Mac-centric vendor that I trust, OWC. If they sell it, it probably works well with Macs.
    http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
    http://eshop.macsales.com/item/Asus/WL167G/

  • HP Laserjet 4 Usb adapter problem

    I recently switched my HP laserjet 4 from a parallel connection to a parallel to usb connector.
    The drivers for both installed properly however the printer does not seem to print is there a specific port I need to use or is there another issue?
    printer prints a test page fine as well.
    Thanks in advance.

    Hi Moorty
    Hi wm300
    I have connected a HP LaserJet 4L to Mac OS X 10.3.9 using a Keyspan parallel to USB adaptor cable. You will require the same hardware setup. It is more than a connector, the cable it has a small converter card in it.
    Keyspan parallel USB printer adaptor
    You already have such a similar cable.
    Your problem seems to be the right driver.
    remove the printer then Add it again and decide which driver you want to use.
    Your model HP will work with the drivers available in OS X, HP LaserJet 4MP, or the old driver downloaded from the HP website for the LJ4/4M will also work.
    A new driver for it will also work available here
    http://buymelunch.org/printing/usbtb/
    So once connected to a USB port, your Mac will see it, load the right driver, and the printer should work.
    regards roam

  • My toshiba satellite e105-s1802 do not recognized my a4tech pocket usb hub pls help me with this?

    my toshiba satellite e105-s1802 do not recognized my a4tech pocket usb hub pls help me with this?

    I AM HAVING THE SAME PROBLEM WITH THE SAME MODEL. I GOT THE SERVICE
    MANUAL AND I'M THINKING TO OPEN IT AND SEE IF THERE'S SOME PHYSICAL BAD CONNECTION
    INSIDE. BUT LIKE YOU SAID.  IT'S ONLY THREE MONTHS OLD.!!! I DON'T WANT TO RUIN THE WARRANTEE.
    BUT THIS IS VERY FRUSTATING. I WANDER IF TOSHIBA DOES THIS ON PURPUSE.!!! KEEP IN TOUCH AND
    IF YOU NEED THE SERVICE MANUAL CONTACT ME AT [email protected]
          THANK YOU.!!!!

  • Not recognizing USB adaptor after Archive and Install

    I recently did an Archive and Install on my PowerMac G4, but after finishing, my Belkin f5d7050 USB adaptor was no longer being recognized. I downloaded the 10.3.9 combo update from Apple using a different computer and got the file to the G4 using an ethernet cable, and made sure I had the correct driver, but to no avail. In the Network preferences, under Network Port Configurations, I see the option for "Ethernet Adaptor (en1)," but greyed out. What can I do make my machine see the adaptor again?

    Could you tell me how you fixed this problem, mine is doing the same.
    Many Thanks.

Maybe you are looking for

  • Index Currency in Report Painter

    Hi, Is there any way I could include the Index Currency as a key figure for my Report Painter reports?

  • Can't update my iPod 30 GB

    As I'm unable to add music to my iPod any longer, I tried updating. I'm unable to achieve the updating cause as soon as I launch the update process, a meesage with "Internal error of iPod manager" appears. Help plaese

  • Does an inline view execute before the rest of the select?

    Hi, The O'Reilly book Mastering Oracle Sql defines an inline view simply as a subquery in a select FROM clause. This conforms to the definitions in the Oracle 9i and 10g docs. But unlike the Oracle docs, the O'Reilly book says the inline view is, lik

  • Running Leopard on one partition and Tiger on another partition?

    I have recently purchased a family pack of Leopard, and I am reading up on a lot of the posts, here, before I venture the installation on two machines. I intend to install Leopard one machine at a time and give a few weeks between installations. One

  • Getting a pixel in an image

    How can i get the color of a pixel in an Image object, or an array of bytes or integers of the image.