USB ADSL Modem and Airport Extreme?

I have an ADSL modem that I use to connect my
Powerbook, using a USB connection. I have now got an
Airport Extreme Base Station. I have only managed to
connect to my ADSL modem directly to my computer
(sitting on an uncomfortable floor) if I want to use
broadband; OR connect wirelessly to the internet with
Airport but using the dial-up phone line.
Main Q: How do I connect to broad band wirelessly?
You will need a new ethernet equipped modem to connect to any router, either Apple's or another manufacturer. USB modems cannot be networked. There are adsl modem/wireless router combos, or you can get an ethernet adsl modem and connect it to any wireless router, or ethernet router with an attached wireless access point.
Q1: Do I need to buy an ADSL modem with an ethernet
port connection to connect into the base station
Yes.
Q2: if so, which one should i get?
These guys provide excellent Mac support, including AirPort:
http://www.adslnation.com/products/xmodem-m3.php
Or check out here:
http://www.adslguide.org.uk/
OR
Q3: Can the USB port on the base station be used with
my current ADSL modem?
Definitely not.
Q4: Am I asking the impossible or missing something?
If you intend on trying to network using a usb modem, you are asking the impossible. Wireless networking is easy, given the right kit.
Sorry if I haven't used correct language, as I am
still new to all this!
PowerBook G4 Mac
OS X (10.2.x)

Similar Messages

Networking with USB ADSL modem (and AOL)

hi there,
just purchased first mac (macbook), and want to get it online.
i have a windows desktop connected to AOL with a USB ADSL modem, and would like my Macbook to be able to be wirelessly connected to the internet.
I understand that having AOL and a USB modem can be problematic in setting up a wireless network.
Can anybody offer me any help, i.e what routers to buy and how to set it up? or even just link me to a similar topic?
thanks very much in advance.
Macbook Mac OS X (10.4.6) 1.83 Ghz, 80Gb, 1Gb mem

Hi andwhy
as Duane suggest you need to replace the usb modem.
You can get a wireless adsl router for about £50.
USB modem cann be networked unless you use your pc as a gateway. This would involve install router software on the pc, then you would need to get a wireless access point connected to the pc.
So it is much simpler and more cost effective to use a wireless ADSL router.
I would check out the adsl routers you can get from http://www.solwise.co.uk

Power backup for dsl modem and Airport Extreme

Does anyone here have backup power for a dsl modem and Airport Extreme that is successful? I have a name brand power backup and when the power goes off both the dsl modem and Airport Extreme remain on; however, the network connection is lost so the fact that they remain on doesn't help. I have been unable to find anything about this problem on the internet generally and consultation with a well-known squad person has not helped. Any thoughts about this will be welcome.

Yes, I agree. But since the backup power keeps the modem powered, why doesn't the dsl connection continue? The squad person I talked with told me that the speed with which the backup power units replace power during an outage is about the same across different backup brands/units (I don't recall the speed but it was in milliseconds) and should be quick enough to retain the dsl connection. Doesn't happen.

Connect MTNL ADSL Modem to Airport Extreme

Hey All,
I have a MTNL ADSL WIRELESS MODEM ROUTER. The range from that router is not great and therefore planning to get another router (adsl or non) and thus make use the connectivity to the maximum. My problem is that in my house i do not get good connectivity due to concrete walls.
i want to buy AIRPORT EXTREME (N-dualband) because i can then connect my mac, ipad and iphones seamlessly and also create a NAS with a HDD attached to Extreme via USB. I want to use the airport extreme to connect to the MNTL WIRELESS ROUTER and extend the network with connecting the LAN cable to the MTNL MODEM ROUTER .I have read that i need to work around some techincal aspecs for this (DHCP, PPPoE, reconfiguring IP, etc.). I am not a pro at all this therefore need a simple solution. Please do advice me on how to go about this procedure as i am really confused about this whole thing.
What i need is :
MTNL Modem Router + Connect Airport Extreme, so that i can use the capabilites of the Airport Extreme rather then the MTnl rOUTER.
WOULD REQUEST AN URGENT HELP ON THIS BECAUSE I STILL HAVE NOT BOUGHT THE AIRPORT EXTREME AND IF THE SOLUTION COMES ACROSS THEN WILL BUY IT. OTHERWISE WOULD HAVE TO GO WITH SOMEONE ELSE (WHICH I DONT WANT TO).

Sorry, but I cannot tell from the information in your post what it is that you want to do.
You mention both an AirPort Express and AirPort Extreme in your post. Will the AirPort Extreme connect to the modem/router using an Ethernet connection and provide a wireless network that the AirPort Express will extend?
If yes, how will the AirPort Express "extend" the signal from the AirPort Extreme? Will it connect using wireless?.....or.....Will it connect using an Ethernet cable connection?

Please help me connect eMac, cable modem, and Airport Extreme Base Station

I connected Ethernet cord from cable modem to Airport Extreme Base Station and then another Ethernet cord from Airport Extreme Base Station to eMac, but I could not get internet access on my eMac that way. I'm only getting internet access by directly connecting eMac to cable modem. Can someone please help me with a step by step explanation of how to set these 3 machines up so that I can have internet access on both my eMac and, wirelessly, on my new MacBook. Thank you very much in advance.
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)

jenngee, Welcome to the discussion area!
Ensure that you power off the cable modem for a minute or so when you switch it to another Ethernet device.
Ensure that you are connecting the WAN port of the AirPort Extreme base station (AEBS) to the cable modem. The eMac should connect to the LAN port.
The steps for setting this up can be found in the "Designing AirPort Networks" (direct PDF link) document. Look through that document and try to get it setup. Then return here if you have more questions. Don't forget to post what you tried and the issues you encountered.

BigPond USB Modem and Airport Extreme 802.11n

Judging by the information I have found I do not think this is possible, but thought worth asking regardless.
I have a Telstra BigPond Wireless USB Modem (7.2) - is it possible to plug this into my AE base station to share with other devices?
Thanks
tkoe

If you are thinking about a plain USB-to-Ethernet adapter (the kind used to get Ethernet from a computer's USB 2.0 port), it is not going to work.
It may work if you can find a special device similar to this one, providing that the adapter manufacturer can guarantee support for the exact mobile broadband USB modem and network that you are using. If so, it should be possible to connect the Ethernet output of the adapter to the WAN port of the AirPort Extreme base station. I should add that I have not tested this.
Another way of handling a situation like this is to use a dedicated mobile broadband router with support for the USB modem/network in question (basically, something like these exemples). Telstra/BigPond may be able to suggest something suitable.
Jan

Wireless modem and airport extreme

Hi. I recently bought airport extreme with the intention of using it to provide wireless access to my external hard drive and printer.
I have a netcomm nb5plus4w modem router which is connected to my broadband and currently provides wireless internet to our laptop.
I am wanting to connect the airport extreme to this current network wirelessly. Is this possible, or will I need to purchase an ethernet cable to connect my modem to the airport extreme??
I just attempted to connect it, and then had all sorts of trouble getting my modem back running with my isp.
Please use as simple language as possible. While I am the techno chick in my marriage, I am by no means proficient in the gobbledeygook language!!!!
Cheers.
i hope I have given enough info.

I am wanting to connect the airport extreme to this current network wirelessly. Is this possible, or will I need to purchase an ethernet cable to connect my modem to the airport extreme??
Sorry, but unlike the AirPort Express Base Station (AX) or the Time Capsule (TC), you will not be able to "join" an existing wireless network with the 802.11n AirPort Extreme Base Station (AEBSn) wirelessly to share USB drives/printers.
Since the router you are trying to connect to is not another AirPort, you will have to connect the two (as you suggested) with an Ethernet cable for sharing.

BellSouth Alcatel DSL Modem and Airport Extreme

I have a new iMac, and BellSouth DSL Internet service (alcatel modem). I get an Internet connection when connecting the modem directly to iMac using an ethernet cable. However, when I try to configure my Airport Extreme 1 of 2 things happens: a constantly blinking amber light, or a green light. In neither instance does Airport Utility see Airport Extreme (even when the light is green). I have tried powering off and recycling both Airport Extreme and the modem, with neither solving the problem. Any thoughts?

The modem is a Speed Touch Home.
wow, I used one of those 8 years ago I did not know they still being used. If I remember correctly it did not have integrated pppoe or pptp client so it requires you to run a pppoe or pptp client on your mac. Therefore when connecting it to an apple airport basestation you have to configure the pppoe client in the base station.
so open your airport utility select your base station , choose manual setup
the click the 'internet' icon in the toolbar of the airport utility window and from the connect using drop down choose PPPoE, then configure it with your isp login details. The click the update button.

USB flash drive and Airport Extreme

I got an Airport Extreme, and one of the reasons why is so that I can have a drive attached to the router so that I don't have to leave on a computer for file sharing or go in and boot up the computer when I needed some files. I am using a 16GB USB flash drive at the moment formatted with FAT32 (no mac in the house). I tried to backup some stuff on it, a bunch of smaller files in a folder totalling about 4.3 GB. The base station keeps rebooting itself in the middle of the transfer.
I saw some threads on here that are hinting that Airport Extreme doesn't work well with any type of external storage, whether an actual HDD or a flash drive. Those were somewhat dated. Is there a way to fix this? I'm using the latest firmware.

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

Usb hard drive and AirPort Extreme

I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great. However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder. If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked. Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
Thanks

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

Problems with Comcast (Motorola) modem and Airport Extreme

I have a very strange problem which I have been unable to solve, nor able to find a solution on Apple Support or anywhere else by Googling it.
I switched back to Comcast/Xfinity, hooked up the Motorola surfboard SB5120 modem:
My primary Macbook Pro connects to the Internet, but (and this is bizarre!) the AirPort Extreme is flashing yellow with the errors listed as a) no Internet conncetion, and b) no DNS server
All other Wi-Fi devices are *unable* to connect to the Internet; they are connecting to the home network, but nothing else.
I did a "hard" reset of the AE, and setup the home network from scratch, same problems: one Macbook connects, nothing else does.
I have power cycled everything multiple times (even unplugging EVERY cable for 30 minutes, then reconnecting), spent the better part of 6 hours trying tor resolve this.
Any other settings to change?
In AirPort Utility colors:
Green for Internet
Flashing Yellow for AirPort Extreme (errors: a) no Internet conncetion, and b) no DNS server)
Green for AirPort Express
sub-menus:
1) Internet, set to "DHCP", nothing listed for IP Address; the Subnet Mask and Router Address have assigned numberes; the last three windows are empty.
2) Wireless, set to "WPA2 Personal"
3) Network, set to "Off (Bridge Mode)
Any solutions would be most welcomed - the idiot at Comcast was insultingly unhelpful. He said that since I was able to successfully connect to the Internet, and that the modem was successfully pinging back to Comcast, that the problem was with the AirPort Extreme.

Many thanks for your reply. I think number 3) below gets to the crux:
1) The MBP is on my network, for sure, not a neighbor's. I'm doing all of this wirelessly, though tested the modem via Ethernet to make sure the modem was working.
2) I reverted to the Verizon DSL modem, it did a handshake with the AE, and all the computers were successfully connected in seconds.
3) Network set to "Off (Bridge Mode)" is how all the computers are successfully connecting via Verizon, so what am I doing wrong when using Comcast? If I set it to "DHCP and NAT" or "DHCP only" I would have to enter a range of DHCP addresses (Comcast's *might* be 192.168.100.1, but not entirely sure (any help on that - might solve the problem?)
Extreme/Express - that was a mistake. I'm solely using an Extreme for this setup, though I also have an Express, I've temporarily taken it out of the network to try to resolve the issues.
Thanks again!

Connecting Motorola SB6121 Cable Modem and AirPort Extreme

I moved into a new house a couple of days ago so of course the first thing that I needed to do was get the home wireless up and running. My ISP is through Comcast. I purchased my own cable modem (Motorola SB6121) instead of renting and used my own AirPort Extreme as the wireless router.
First, if you're purchasing your own cable modem, you will need to contact your ISP and provide them with the HFC MAC ID on the cable modem. Once you've gone through the motions, you will be able to connect your Mac (in my case Macbook) directly to the modem via ethernet cable and access the internet.
Issue:
When I connected the SB6121 to the AE, I could connect wirelessly to the AE, but I did not have access to the internet. So, basically the SB6121 and the AE were not talking to each other despite being physically connected via ethernet cable.
Solution:
After days of searching for online answers and forums (and trying different solutions) I was able to successfully get everything up and running. Make sure that you have 2 ethernet cables available.
Here are the steps.
I restored my AE to factory settings just to keep everything simple. Here are instructions: http://support.apple.com/kb/HT3728 Once you've restored your AE, make sure that both the AE and the cable modem are unplugged from their power sources.
Plug in the power to the SB6121.
Connect your SB6121 directly to your laptop via Ethernet cable. Test to ensure that you have internet accessibility by going to any website.
Remove the ethernet cable from your laptop and plug it into the "internet in" jack in the back of the AE.
Power up the AE.
Connect your laptop to the back of the AE using ethernet cable #2.
Launch a browser. You should now be able to successfully connect to any website.
Assuming that you reset your AE to factory settings, it should just be broadcasting the generic "Airport Extreme" SSID. Disconnect the ethernet cable and connect using wireless to the SSID. Launch a browser and you should be able to connect to the internet.
You can now use the AirPort Utility to configure the AirPort settings.
I assume that this solution would work with any of the base stations.

I was having the exact same issue tonight. Just purchased the AE Model A1408 and haven't been able to maintain an internet connection on my iMac whenever I tried hooking it up via the Airport Utility application. So after I had the SB6121 connected to the AE and the AE connected to my PC with no luck, I then went to the Network icon in System Preferences. Clicked on "Assist me...". Then clicked on "Diagnostics..." and followed the directions which basically had me first power down the SB6121 modem and power it back up. Then I powered down the AE router and powered it back up. At that point I was now getting an internet connection. I then took my ipad 2 and went to the Wi-Fi settings and noticed it was asking me to setup a network through my AE. I selected that and went through the simple steps to set up the network and password and now it all works. I am a novice so don't ask me why but I now get a green solid light on my AE. I can connect other devices wirelessly. I can still access the internet on my iMac. For whatever reason, using the Airport Utility on the iMac doesn't work in my case and using my ipad to set up the wireless network did the job.

Time Warner Ubee U10C018 modem and Airport Extreme

Using the equipment stated in the subject. I connect the modem to the extreme, after a few moments I get a green light, neither my iMac nor PC laptop can connect to the internet. The ip addresses that are assigned begin with 169. even though I have the extreme setup to assign the adresses 10.0.0.199 and .200 accordingly. I've never had a problem using the extreme in the other three places I've setup this network. Normally just plug into the modem and you're good to go. I've tried researching any known problems with this particular modem and have turned up nothing useful. Just curious as to where I start to look next.

My previous response was faulty... Only one computer was getting an IP address..
Here's what really worked, with 2 macbooks and a pc connecting wirelessly to the Airport Extreme, all successfully connecting to the Internet:
1. Disconnect the ethernet cable and power off your modem (Ubee)
2. Open Airport Utility, select your router (Airport Extreme), and press 'Manual Setup'
3. Go to the 'Internet' tab, then under Internet Connection, make sure 'Connection Sharing' is set to "*Share a public IP address*"
4. Under TCP/IP, Configure IPv4 should be set to 'Using DHCP'. All other settings can remain the default. Press Update.
5. Power up your modem, wait for the Ready and Sync lights to go steady, then connect the ethernet cable from the modem to the router.
Apparently, Time Warner only assigns one IP address per device (in the case the router), it's up to the router to distribute IP addresses to its constituents. I wonder why this doesn't happen automatically... :\ Let me know how your experience pans out.
Peace
Message was edited by: orisinal

Adding QoS with a switch between modem and Airport Extreme?

Since the Airport Extreme does not offer any QoS, is this something I can add to my network with a QoS capable unmanaged network switch such as this one - http://www.dlink.com/ca/en/home-solutions/connect/switches/dgs-105-5-port-gigabi t-ethernet-switch ?
My network would then be wired like this;
Cable Mode ---> D-Link DGS-105 --> Airport Extreme --> wired / wifi network devices
(I might add a switch after the Airport Extreme either way at some point to increase the number of wired devices)
Nothing other than the cable modem and router would be plugged into the D-Link switch... - but will this actually make a difference, will it cause any grief on my home network? Is there a better way?
If its relevent, the primary reason I'm thinking about QoS is so that video chatting, streaming (on AppleTV or computers), or online gaming isn't interrupted by other devices browsing the web, downloading, etc. I've got good bandwidth from my ISP, but in my house there are 3 Apple TV's, 4 computers, 3 iPhones, and 2 Xboxes......

Based on your goal, I would suggest that you take a look at this article. With QoS you are controlling which traffic gets priority going upstream to your ISP, not the other way around. Instead, I believe you what you really want is to implement a form of VLAN. Like QoS, Apple routers do not natively support VLANs. You would need a router, like a Cisco RVS4000 to do this. VLANs are not dependent on physical switches, although you can assign a separate VLAN segement, one to each Ethernet port of the router. You can then attach the AirPort to one of the Cisco's VLAN segments. Any device, wired or wireless, connected to the AirPort would get the same priority.

How to configure modem and airport extreme?

I have a TP-Link modem/wireless router from the provider.
My Airport Extreme is connected to the modem.
The wireless router in the modem has been switched off.
There is a 'double NAT' warning from the AE.
How to configure the TP-L modem and the AE router to get the best results?
Many thanks if some one could help me there.
Gr. Lance

Turning off the wireless on the TP-Link router does not make it a simple modem.
You need to configure the AirPort Extreme in Bridge Mode to operate correctly with another router on the network.
Open AirPort Utility and click on the AirPort Extreme icon, then click Edit
Click the Network tab a the top of the window
Make sure that the setting for Router Mode is "Off (Bridge Mode)"
Click Update to save the new settings
Wait 30 seconds for a green light on the AirPort Extreme, then power off the complete network....all devices....in any order you want.
Wait a minute, then start the TP-Link modem/router first and let it run a full minute
Start the AirPort Extreme next the same way
Keep starting devices one at at a time the same way until the entire network is back up.

USB ADSL Modem and Airport Extreme?

Similar Messages

Maybe you are looking for