USB and Media Card Reader disabled after installing DM

I installed the DM 4.3 from the CD tonight. Hooked up the BB and everything worked fine. Loaded some music onto the media card and downloaded some pictures. Then I unhooked to see if the music was on the Blackberry, when I hooed it back up, it wouldn't recognize. I tried a few times, then uninstalled the software, re-installed, still nothing, then un-installed and downloaded 4.7 and installed, still nothing, now my computer doesn't recognize ANY USB ports (web-cam, Media Center Remote) and none of the Media Card reader drives are visible in My Computer. When I insert the SD card from my camera, nothing. I uninstalled 4.7 and still nothing. Now I'm worried..
Please tell me that I don't have to wipe the whole computer and start again.. Please!!
neuralgroove

About the SD and SDXC card slot
Mac 101: Connect your camera or camcorder
Which os are you using? If Lion - OS X Lion: Use an SD card
If another os please research Apple's Knowledge Base for troubleshooting suggestions pertaining to your os.
iPhoto '11: SD card
"We're sorry, but the Safari browser version you are using does not support the community toolbar" I'm not sure if all of these problems are related.
Post in the Safari community.
Mac Book Pro (around 18 months old)
If no other troubleshooting solutions are forthcoming and you have AppleCare, give them a call and get a case number. Otherwise,
take the computer to an Apple store or an AASP. Whichever is more convenient for you to get a proper diagnoses of what is actually going on.

Similar Messages

Installing DM knocked out all USB and Media Card Reader

I installed the DM 4.3 from the CD tonight. Hooked up the BB and everything worked fine. Loaded some music onto the media card and downloaded some pictures. Then I unhooked to see if the music was on the Blackberry, when I hooed it back up, it wouldn't recognize. I tried a few times, then uninstalled the software, re-installed, still nothing, then un-installed and downloaded 4.7 and installed, still nothing, now my computer doesn't recognize ANY USB ports (web-cam, Media Center Remote) and none of the Media Card reader drives are visible in My Computer. When I insert the SD card from my camera, nothing. I uninstalled 4.7 and still nothing. Now I'm worried..
neuralgroove
Kudos! Thanks!

I installed the DM 4.3 from the CD tonight. Hooked up the BB and everything worked fine. Loaded some music onto the media card and downloaded some pictures. Then I unhooked to see if the music was on the Blackberry, when I hooed it back up, it wouldn't recognize. I tried a few times, then uninstalled the software, re-installed, still nothing, then un-installed and downloaded 4.7 and installed, still nothing, now my computer doesn't recognize ANY USB ports (web-cam, Media Center Remote) and none of the Media Card reader drives are visible in My Computer. When I insert the SD card from my camera, nothing. I uninstalled 4.7 and still nothing. Now I'm worried..
neuralgroove
Kudos! Thanks!

Airport Exp. USB and photo card reader

My express works fine with Itunes, wireless printing, but does not seem to recognize my universal card reader for digital camera . ( I take the card out of the camera, and insert it into the reader. It works fine when plugged directly into the conputer USB. Thanks for any help.

The AEX's USB port can be used for a printer. It is not intended for any other device.

Old extreme n, and usb media card reader

hey, i am trying to hook up an iogear usb media card reader, a usb memory stick, and a portable 2.5" hdd to the belkin mac mini usb hub, and the hub to the old airport extreme n base station.
the usb stick and the hard drive are recognized without any problems.
the media card reader shows up in the disks tab of the airport utility, but it doesn't show something is connected to the card reader when a card is added. it just keeps showing 0MB in all four slots.
usb hub is powered, card reader is not.
when i connect the reader to the AEBS directly i get the same result, so i don't think the hub is the problem, since it runs other two devices flawlessly.
usb card reader works fine when connected directly to any computer as well.
any ideas? is it not possible to connect a card reader to the base station?

Unfortunately not.
The only devices that work are printers, disk drives and hubs.

T510 Media Card Reader and XD card

I have a T500, but just got my daughter a T510. She is now away from home at school and having trouble with the media card reader. Seems it is very different from the one in the T500.
Is there any place I can get instructions on how to use this reader T510 media card reader?
Her camera uses an XD card, which just slips into the T500 reader, but she says that the media reader is a tray in the T510.
Can it read an XD card? If so how does it operate.
Thanks
Solved!
Go to Solution.

From Personal Systems Reference; Lenovo ® ThinkPad ® Notebooks; April 2010 - Version 376
5-in-1 reader (MMC, Memory Stick, Mem Stick Pro, SD, SDHC)
The T510 reader is not compatible with xD cards. She will have to use a usb cable from the camera or get a usb xD carder reader.
T510 4313 CTO i5-520 8GB 250GB win7 64 HD+/ Integrated Graphics Intel 7260.HMWG

Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
Thoughts?

SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
(My previous installation was a Mavericks upgrade from Lion)
However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
The generic and ambiguous internal error comes when I try to manually identify the peripheral.
Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
(I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
However, when I click on it and then tap OK, it returns internal error.
As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
So:
- Do you know any applications to 100% clean files created by an installer?
- Do you have in mind any solutions that I might have forgotten?
Thanks in advance from an OS X fan!

HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
Any other setting needs to be changed?

Hey, thanks for your updates.
The photos are 8 character long and extension is .jpg
The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
Can you advice.

X200s--how to change into 5-1 Media card reader and modem

Hi,
I just bought this X200s yesterday. I guess I fogot to check option of 5-1 Media Card Reader ? So, what I am gonna do to upgrade them ? Do any one know how ? Is it possible ?
Thanks
N

http://www.amazon.com/gp/product/B000ZH7J9S/ref=s9_simz_gw_s2_p23_t2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=c...
there it is !
Thanks
N

Ideapad U160 - Internal Card Reader Issue After Sleep

Hi All.
I've just purchased a Lenovo U160 and I've not been able to solve an issue with the internal card reader. It's a "Realtek USB 2.0 Card Reader" internally wired to the motherboard.
When I got the laptop, I put a Momentus XT in it and installed Windows. I've tried using the drivers that were included on the Lenovo recovery partition, the ones on their website, and the ones direct from Realtek with no success.
The problem is, when my laptop resumes from sleep mode, I get a fair few "new USB device" noises and about the same number of "USB device not recognized" errors. If I look in the device manager when this happens, the card reader is no longer there, and I have an "Unknown Device".
After a shut down, or a reboot, it's back again.
I've tried another clean install of Windows but I'm still having the same issue (I've applied KB974476 and KB978258 before installing the drivers).
There are no sleep options in the BIOS, it's very basic. I am running out of ideas..
Any thoughts?

KF8RVmark, welcome to the forum.
Here is a guide to help you troubleshoot your problem with the card reader.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

T420s 4-in-1 media card reader adapter problem

I'm wondering if any other T420s owners have had this problem with the media card reader.
Until about two weeks ago, the laptop was working fine, or so I thought. I usually put the laptop to sleep mode instead of shutting it down completely just to speed up boot process. Then, two weeks ago, I tried shutting it down completely. It got all the way to the "shutting down" screen but it would not completely turn off unless I hold down the power button.
It took a while for me to figure out that the media card reader was preventing it from completely shutting down -- even after restoring it to factory settings. Hardware manager recognizes the controller. It also recognizes the card reader if an SD card is inserted but would not assign a drive letter to the reader (i.e., I cannot read the card).
This is what I've tried:
1. Uninstalled and re-installed the drivers for the smart card reader and the controller. That didn't work.
2. Restored the laptop to factory settings. That didn't work.
3. Uninstalled and deleted the drivers for the smart card reader and the controller, then downloaded and installed the latest drivers from the Lenovo website after restoring the laptop to factory settings. That didn't work.
The only common thing in the process is this: the laptop would not shut down completely if there is an SD card in the reader. I initially suspected that it was the SD card itself but I've tried it with four different SD cards and the results were all the same -- it would not shut down if the card was inserted. While displaying that "shutting down" screen, it will shut down immediately after I pull out the SD card, even if it's been hanging in that state for minutes.
I suspect that it is the card reader itself that's causing the problem, and that I need to have it replaced (the laptop is still under warranty). However, I thought I'd seek the advice of the experts out there and find out what their thoughts are.
Thanks.
Solved!
Go to Solution.

kytz01 wrote:
Just took it to an authorized service center in Gaithersburg, MD (about 10 minutes from my office). I hope it's simply a matter of replacing the card reader.
BTW, 4-in-1 reader doesn't mean much. It's just an SD, SDHC, SDXC and MMC reader. Pretty much the same form factor. Now if it can read both SD and CF cards, I'll be really happy (my DSLR uses CF).
Thanks to everyone who offered advice. I'll post the service center's findings when I get my laptop back.
Good luck!!!
Yeah I have/had the same problem I have a DSLR that uses both CF xD, my HP notebook mulitcard reader reads xD, SD (4GB), but no CF. CF is a big card so I can see that as a problem on some notebooks. However I also have a camera using the Memory Stick Pro and it goes into the same slot on my HP but as you said. Lenovo's reader is only supporting the SD series which is a bummer. I still have to use an external reader for two other cameras.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Media card reader not working

Hi:
I have a Compaq Perserio A900 running Vista
My built in media card reader has stopped recognizing my cards when I put them it. Usually a green lite will light up on the card and then the auto run will pop up, but not nothing.
The only thing I've done recently was install a sandisk ultra backup 16gig flash drive hardware and I use the flash drive in the USB port that is just above the card reader.
I also have 2 other USB ports on the right side of the computer. I was going to use on of them for the flash drive, but they seem to be dead or something. I tried to plug my iphone into them and they do nothing, it doesn't charge or anything.
Do each USB's have to be dedicated to a particular pariphial?
I guess I can live with one USB working but I certainly need my card reader to work.
Help would be appreciated.

Hello,
the drivers are there:
http://support.lenovo.com/de/de/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
http://support.lenovo.com/de/de/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
It depends on the installed Card Reader.
Please try and give feedback if this helps.

Usb and firewire not working anymore after ftdi driver installation

hello there,
i had to install the ftdi driver (http://www.ftdichip.com/Drivers/VCP.htm) in order
to use my dive computer with macdive 2.
now after i have done that, my mbp does not recognize my usb 2.0 card reader anymore.....
also my firewire 800 cf cardreader is not recognized.....any ideas, where to start. i just
moved from windows to mac and i am really lost.....
brgds
christoph

Hi all, in answer to the above suggestions:
No the 10g database and listener is completely down (no services belonging to the new 10g database are running). I checked also alle the logs, but no messages anymore since saturday.
What I did notice: Oracle92HTTPserver (a service normally started automatically) does not start. When I start it, it gives me a message that there is nothing to do and that the service therefore is not started. So the HTTP-server itself is not working anymore. I can't find any files changed by th installation in the Ora92 home Apache directories. All seems as it was before the installation And still it won't start....
Does anybody have other suggestions? Please help.
Thanks in advance,
Jan.

Vivitar Media card reader. Read only?

Hello
Everyone I have a Vivitar Media card reader and every card I put in shows up read only? Any ideas?

Never reformat a camera's memory card using your Mac — always reformat the card or delete pictures from it using your camera's menu commands, not the Mac. A card that's been formatted on a Mac or had pictures added to or deleted from it by a Mac is likely to be found unusable by many cameras. Reformatting in the camera usually resolves that problem.
As for your card being seen as read-only by the Mac, that's not a drawback if you adhere to the practices I've recommended above. But if you want to use an SD card for something other than uploading photos from your camera to your Mac, then it's a pain, and the problem ha been reported here a number of times before. For some people, inserting the card very fast into the SD slot has remedied the problem. Others have found that they need to push the card slightly upward, downward or to one side or the other while inserting it, rather than just pushing it straight in. Still others have found that certain cards' locking sliders bind against the side of the slot and get pushed into the locked (read-only) position as the card is inserted. You can experiment with all these ideas and see what happens, but in some cases just switching to a different brand of card has been the answer. And while it's irksome to contemplate resorting to a USB card reader when you have what ought to be a perfectly good SD reader built into your computer, for some people that has been preferable to relying on an unreliable SD slot.

Smart media card reader

I cannot get my new imac to recognize my Olympus smart media card reader nor read the card
what could be the problem
I can read other cards in my other card reader, compact flash, SD etc

In System report under usb I show
USB Media Adapter........ highlight it and I get
0x07b4 (Olympus Optical Co., Ltd)
so it would seem the computer knows there is a reader out there but not seeing the card in the reader
I have reformated the card in the camera also

PCMICA Media Card Reader only mounts once per session

After I restart and insert my PCMICA media card reader will show up on the desktop but only once. After I eject the card and reinstall it will not show up on the desktop. The card appears in the menu bar but no where else not on the desktop or in a finder sidebar. It acts like it is permanently ejected. The only solution is to restart which is time consuming during a photo-shoot (Sleep/Wake and Finder Relaunch do not solve this). I have two media card readers one for CF cards and a 4in1 for smaller cards. Both act in the same way and once one has been ejected the other wont mount as well. Both cards worked fine in system 10.3.9. System log does not show any difference in loading when it mounts and when it doesn't.

Well, I tried the hardware test and now we know it is a software problem(hardware checks out fine).
I checked out the Delkin website. That was disappointing. Looks like I need to buy more hardware to solve this one. Worse yet if I spend the $100 for two cards they wont work in my next laptop as I plan to get a MacBook as soon as PhotoShop is Intel ready.
So now the question is what do I do with this growing mountain of unusable peripherals. My business is small but we've bought a lot of macs. Close to 50 now. We had a few before Y2K and just before we replace all the PCs with iMacs and G4's. System 8.6 was great and every printer and reader and camera and scanner and external storage device (some going back to 1989) worked great. Now that we have "upgraded" the software so we can do really complicated things like properly viewing web pages and send authorized email nothing works right. I have faxes (Apple 56k in a G4) that can't detect detect dial tone when faxing but can connect to the internet as a modem. Printers that print fine in TextEdit (PS fonts and all) but can't print out of Excel. Dont even get me started about fonts. The list keeps growing and the only answer I hear is to replace perfectly good hardware with new stuff. Then when I do I find the software wont work. (I had to use a old laptop with 10.3 to run the latest software from Version to set up a friends home DSL.) I need to get out of this loop it is costing more than it's worth.

USB and Media Card Reader disabled after installing DM

Similar Messages

Maybe you are looking for