USB APPS DOWNLOAD NOT WORKING
After buying new bold 9780 and trying to download some apps throught the desktop software and it wont work, comes up with some error saying " Apps world web Pluggin error"
how do i fix this very frustrating.
BaseJump wrote:
thats it simply. ( Apps World Web Pluggin Error ) now what?
OK...let me help you some more...There is no such error message that is exactly what you have said..."Apps World Web Pluggin Error" (sic) is not valid. I need to know that exact and complete error message in order to look anything up.
BaseJump wrote:
now no matter what I do i cant seem to download any Apps.
Further, I need to know exactly what is is that you "do". Exactly and completely, step by step would be best. I need to know exactly the steps you take and exactly the results from each step. From what you've said, I can't tell for sure.
It sounds like you are tethered to your PC when you try this. You also originally said that you were trying to download apps via the desktop software...that would be a completely different process than using AppWorld at all. So, again, I need exactness and completeness from you with all details. Otherwise, all I can do is guess at what you are doing...and that does not much good for anyone.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
WU and STORE(apps downloading) NOT working behind PROXY
Recently I upgraded to build 9926 from build 9879. I use <g class="gr_ gr_23 gr-alert gr_gramm Grammar only-ins doubleReplace replaceWithoutSep"
data-gr-id="23" id="23">proxy</g> for internet access.
Previously I was able to use all the services including WU and downloading apps from Store through proxy connection. But in build 9926 I am not able to download apps from Windows Store and even WU is not working.
I used the command "<g class="gr_ gr_264 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="264" id="264">netsh</g><g class="gr_ gr_264
gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="264" id="264">winhttp</g>import proxy source=ie" but it is also not working. All the features are
working except Windows services, I am also not able to download .NET frameworks through WU. WU is giving this error code : 0x80240438 and STORE shows this error : 0x80072efd. Please help me.
I am stuck <g class="gr_ gr_204 gr-alert gr_gramm Grammar multiReplace" data-gr-id="204" id="204">in</g> this network issue.
PROXY system works fine in all
<g class="gr_ gr_22 gr-alert gr_gramm Grammar multiReplace" data-gr-id="22" id="22">other version</g> of Windows, only build 9926 is showing such behavior.
Please help!!!!!
Hi,
Have a check of the following command to make all use the proxy settings
Netsh winhttp import proxy source=ie
And this link can also be helpful
How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site
http://support.microsoft.com/kb/900935
Yolanda Zhu
TechNet Community Support -
Why do I keep getting prompt to download creative cloud app manager when I already have it? I've tried re-downloading, not working.
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
my OS 06 is not supportive to download any application from website becouse BB app word not working. some one help me to get a new version of OS plz either it my work
can you explain what you mean by "BB app word not working" ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
I've downloaded ios8 but GLWIZ app is not working? Any advise?
I've downloaded ios8 yesterday on my iPad & iphone but the GLWIZ app is not working. I'd appreciate any advise to solve this problem.
I see that app has not updated to iOS 8. Write to them and ask them when they are going to do it.
-
my ipod 3g hung up in the middle of a song and when i restarted it, the downloaded apps are not working
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- The remaining items in:
iOS: Troubleshooting applications purchased from the App Store -
Most of the default Mac Apps does not work after Mavericks Upgrade
Hi, I did everything, but nothing has brought me out of this misery .
I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
Hoping to get some response soon from Apple support team to help me.Hi Arthur,
Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
And below is the report generated from EtreCheck. Hope it can help me find the solution.
Hardware Information:
iMac (20-inch, Early 2008)
iMac - model: iMac8,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 2400 - VRAM: 128 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
HP IO - Path: /Library/StartupItems/HP IO
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
MySQLCOM - Path: /Library/StartupItems/MySQLCOM
ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
VirtualBox - Path: /Library/StartupItems/VirtualBox
System Software:
OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
Disk Information:
WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Western Digital My Book 1110 999.5 GB
WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.logmein.driver.LogMeInSoundDriver (1.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[failed] com.google.GoogleML.plist
[loaded] com.google.keystone.daemon.plist
[not loaded] com.logmein.logmeinserver.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.wdc.WDDMservice.plist
[loaded] com.wdc.WDSmartWareServer.plist
[loaded] rapiback.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.logmein.logmeingui.plist
[not loaded] com.logmein.logmeinguiagent.plist
[not loaded] com.logmein.logmeinguiagentatlogin.plist
[loaded] syncmateStarter.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.facebook.videochat.[redacted].plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
AirPort Base Station Agent
EarthDesk Engine
LMILaunchAgentFixer
AdobeResourceSynchronizer
RealPlayer Downloader Agent
Windows Phone 7 Connector Agent
iAntiVirus
TextEdit
StatusMenu
HP Scheduler
WDQuickView
3rd Party Preference Panes:
Application Enhancer
DivX
EarthDesk
Fan Control
Flash Player
Flip4Mac WMV
Growl
MacFUSE
WDQuickView
Internet Plug-ins:
AdobeExManDetect.plugin
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
DirectorShockwave.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Picasa.plugin
Unity Web Player.plugin
WebEx.plugin
WebEx64.plugin
Bad Fonts:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
29% mds
2% WindowServer
1% mds_stores
1% LogMeInGUI
1% RealPlayer Downloader Agent
1% EtreCheck
1% FanControlDaemon
0% uTorrent
0% notifyd
0% networkd
Top Processes by Memory:
1.00 GB mds
106 MB mds_stores
78 MB Google Chrome
49 MB Finder
45 MB WindowServer
40 MB Google Chrome Helper
37 MB VLC
29 MB uTorrent
20 MB EtreCheck
16 MB DashboardClient
Virtual Memory Statistics:
43 MB Free RAM
989 MB Active RAM
934 MB Inactive RAM
447 MB Wired RAM
4.25 GB Page-ins
454 MB Page-outs -
Recently upgraded from Windows 7 to 10. Now EOS Utility app does not work.
Recently upgraded from Windows 7 to 10. Tried downloading photos from my 5D Mark II, but EOS Utility app does not work to Select Images to Download, unlike before. But when I disconnected my External Hard Drive, EOS Utility app main window works normally. I need the external hard drive connected all the time. How can I fix this problem, please? Thanks.
This sounds like a hardware problem with your computer. A USB port puts out a certain amount of power and can be used to power external devices... such as hard drives. But the camera does not use any USB power -- it runs on the power from the internal battery. It only uses the data pins to communicate. But you are describing a situation in which having one device connected a to a USB port prevents a different USB port from working. That can happen if the device in one port is drawing too much power (it can prevent other ports from working correctly.) Did you have this problem when using Windows 7?
-
External USB HD does not work with HAL:
External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era -
Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?
What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS) -
My appstore app is not working on my macbook pro?
my appstore app is not working on my macbook pro? It simply shows a piece of paper with a pencil, ruler and paint brush.
Hi...
Delete the app and all the associated files using this utility > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
Then re download the app. You won't be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.
If you continue to have problems with the app you can report it to Apple here > Apple - Support - Mac App Store - Contact Support
And go to the app at the App Store. You should see a link to the app developer's site for support. -
I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.
Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia -
Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
ShaweHi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405... -
I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue
Hmmm...I'm using 1Password Version 3.8.20 (build 31499) with a fresh install (scrape and pave) of Mt. Lion on my iMac and it's working fine.
I use Dropbox to sync 1Password so for my fresh install I simply downloaded 1Password from Agilbits website and installed it.
Have you tried reinstalling 1Password? Depending on how you purchased it, download it from their website or from the Mac App store to reinstall/replace it. (IIRC v3.8.x comes directly from Agilbits and v3.9 from the Mac App store.) You shouldn't have to uninstall it, the new download should overwrite the existing copy.
As with anything else, be sure to run a backup first!
More here:
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/17861-finding-existing-data-file-when-reinstalling-1password
http://support.agilebits.com/discussions/1password-in-mac-app-store/3377-how-to- reinstall
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/13769-reinstall
http://support.agilebits.com/discussions/1password-in-mac-app-store/2394-reinsta lling-1-password
Hope that helps.
D'oh! Mende1 beat me to it! -
My premier league goals app is not working. I;ve tried to delete it and download again and again and it still dosen't work. I can
look at the table and read the news but con not view the videos.You should really read the manual.
Reset is covered in the basics section of the manual.
iPod touch User Guide (For iOS 6 Software)
Maybe you are looking for
-
Using airport express with no Internet
Have a problem here that's quite complex. We have a brand-new HP office jet Pro that appears to support AirPrint. We would like to be able to print from several IOS devices in the office -- iPhones and iPads. But for that to work the printer AND the
-
I am transferring HD video from AVCHD into FCP 6.0.4, and I need to know what the correct setting is for the aspect ratio (in the sequence preset editor). The footage is captured 1920x1080 at 30p. I plug that all in, but the only choice for plain HD
-
HT3209 Where are the movies I downloaded
I purchased movies on iTunes but cannot find them to play back. Where are they?
-
How to install Workshop for WebLogic and WebLogic Portal?
Hi All, I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals.. Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal? As per the ""Tutorials – Getting Started with WebLogic Portal"" (http:
-
Epson R1800 - installing printer driver ??
I have a MacBook (10.4.7) connected to an Epson R1800 printer via USB. Prior to upgrading to 10.4.8, the printer worked fine. However, OSX 10.4.8 proved to be a catastrophe and I had to revert to 10.4.5 and then upgrade progressively to 10.4.7 (repai