USB Audio Device Not Recognized by Stream 7 tablet

Half the reason I bought the Stream 7 was to use it has a music player with my iBaso D2 USB Audio DAC Headdphone Amp.
The device is recognnized by my Win 8.1 desktop and every other computer I've plugged it into. Why it is not recognized as an audio playback device is beyond me. I've tried all of the suggestions that I've been able to find on the net without any luck. Is therte some reason why this function has been disabled on the Strwea 7?
This question was solved.
View Solution.

Problem Solved!
It turned out to be a combination of the usb cable and the OTG USB hub. On my desktop the iBaso was cable specific as to the device being recognized. When I tried the working cable witht the OTG hub on the Stream 7 it failed as usual. But when I tried the cheap monoprice adapter it worked.
The usb audio solves the horrible sound problem with the Stream 7 for anybody who is lookiing for a Fix.
The OTG hub works with a mouse and a mSata drive perfectly but not with the iBAso DAC.
Thanks to everyone who replied for keeping me trying.

Similar Messages

GPIB-USB-B device not recognized by Windows XP

I am using an HP Compaq nx9010 notebook with Windows XP Pro. When I plug in the the GPIB-USB-B, I get an error message telling me that 'The Device has not been Recognized'. I hjave followed all the instructions and have updated the bios and drivers of the notebook, but to no avail. I have uninstalled and reinstaleld the drivers several times to no effect. I have also tried running the device on an older Windows 98 PC, but the interface is not recognized there either! Is it broken?

Hi Andrew,
It's Pete from NIUK Tech. support department here. From what you've described it does sound like there may be something wrong with your product.
Firstly, I would just like to make a couple of checks to make sure. If it is broken, we can then organise for it to be repaired/replaced.
1. Has the GPIB-USB-B ever been working. i.e. how long have you had it, was it working when you got and has since stopped working or has it never worked.
2. Are you plugging in the GPIB-USB-B before the computer is switched on. This shouldn't actually matter as it is a plug and play device. It would just be useful to know if it works when you switch the computer on with the device plugged in.
3. I know you've tried it on a couple of computers with differen
t operating systems, have you also tried different USB plug and play devices on the same USB port as your plugging this device into.
These questions are just to cover all the bases before we send it back to the factory for repair. If we do need to RMA the device then I will need to speak to you in person to get some more details. If and when this is needed, it would probably be easier for you to either give me your e-mail address or phone into the department and ask for me.
Anyway, if you get back to me with the answers to these questions then we can carry on from there.
Best regards,
Peter H
Applications Engineer.
National Instruments.

USB Medical Device not recognized by iMac or Windows through Parallels 7 Virtual Machine

I have a USB Medical device which initially i was using through a Windows based Laptop, I want to connect it to my iMac to use it through Parallels on Windows 7. The device is not recognized by my iMac therefore it is not recognized by the virtual machine. It does not show in the Universal Usb devices or else. It is a Windows USB Device.
Would appreciate your help.
Thank you
Kantu

Thanks for the reply. I was able to get the WD hard drive back up and running using the Disk Utilities application. I tried to fix it using the diagnose / repair option but that failed so I had to reformat and partition it. Now it works great but I lost all the data that was on it. I still don't know what caused the problem and hope it doesn't happen again.

Usb audio devices not working

just updated to os x mavericks only to find my Roland fa 101(firewire soundcard) and my Access Virus Ti (usb synth /sound device) (running cubase studio 4 ) are not working ,had a quick read up and as far as I can tell its something todo with CoreAudio2 and class 2 USB sound devices ,I was wondering if apple are planning to fix this issue asap as I need this kit working ,
Cheers

Hey man, there are a bunch of us with the exact same problem!
The recent 10.4.10 update has totally F**D up our alesis interfaces,
we are P**D off and apple hasnt even acknowledged a problem. The is a longer thread you need to check out here:
http://discussions.apple.com/thread.jspa?messageID=4884775&#4884775
All we can do is complain to apple and wait. It S**KS bad.
But, there are heaps of us who are outraged. you can make a complaint to apple here:
http://www.apple.com/feedback/garageband.html
or here: http://www.apple.com/feedback/mac/tm.html
I encourage you to complain man, they need to know!

USB 2 devices not recognized on Master Farm Mainboard

I have a few problems with a MSI E7210 Master FARM motherboard.
One of these problems is is that I cant use USB 2 Sticks once the Intel drivers are installed. The USB ports on the back work. But on the front it gives an error Unrecognized USB device. Before I install the intel drivers the USB ports on the front work but only in 1.1 mode. I have clear the cmos but it did not help. I'm also missing an menu in the BIOS PNP/PCI Configuration. (See link)
Missing PNP/PCI Configuration
Due missing this options I can't reset the ESCD Configuration data.
I'm really getting a headache and I'm not getting happy with this board. I have made a call to MSI USA with this problem about the missing menu option and the man told me its by design. I hope there is someone here in the forum who has good connections with MSI people so that they could look at this problem. I mustn't be the only one in the world with this problem.

For OS like Win2K or WinXP, you've to update to Service Pack 4 for Win2K and Service Pack 2 for WinXP to get USB 2.0 to work.

Itune song files won't play and my Soundsticks USB audio is not recognized on my G4 Cube running OS 10.4.11.

I have repaired permissions and reinstalled iTunes (ver. 8.2.1), but so far that has not helped.

If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Firewire/USB audio device not working post 10.10.2 upgrade

I have an M-Audio FastTrack Pro and and Echo AudioFire2, both of which worked fine, until I updated to 10.10.2. Any ideas what's being done to FIX THE PROBLEM? Or workarounds?

It's worth trying because it just takes a minute, IMO.
PRAM stores speaker volume among other things.
They include:
Status of AppleTalk
Serial Port Configuration and Port definition
Alarm clock setting
Application font
Serial printer location
Autokey rate
Autokey delay
Speaker volume
Attention (beep) sound
Double-click time
Caret blink time (insertion point rate)
Mouse scaling (mouse speed)
Startup disk
Menu blink count
Monitor depth
32-bit addressing
Virtual memory
RAM disk
Disk cache

B500 USB Device not recognized error at startup + sound issue Dissapointed

Hello,
We have 2 B500,
whenever i start them, after windows load they are giving me an error, "USB device not recognized" I am not sure what to do any help will be greatly appreciated as this is strange that both the machines are giving the same error,
also on one of the machines the sound does not come work, i have tried to trouble shoot, the diagnosis says speakers are working fine, but sound does not come out at all.
I am kind of dissapointed with these issues, we always use to buy from Dell but we thought we would give Lenovo a chance, the machines were barely a couple of months old when the issue started,
any advice please?
Solved!
Go to Solution.

Well being that it is the same PC as the other I am sure the speakers are plugged into the correct spot. Have you checked the speakers with other devices to make sure the speaker is fine? Since the other PC's drivers are working, you can use DRIVERMAX to pull the sound driver from the good PC and also use DRIVERMAX to install the driver you pulled from the good one. Just uninstall the sound drivers from the bad PC first before installing the new driver.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

USB Device not recognized by windows

When I first plugged my iPod into my computer, it went through the whole recognizing new hardware thing. Installed the drivers, then said that the new device was ready to use. But then I get a message that says "Device malfunction, device not recognized by windows" or something to that effect. I only have 3 days to return this iPod...anyone have any ideas? Thanks.

I'm not very familiar with the Windows OS but try this tip I picked on the forum up a while back, hopefully it might help.
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer.

USB Device Not Recognized

Operating system: Windows Vista
Error: USB Device not recognized
While actively on the computer, we suddenly got a message stating that the USB Device was not recognized. The only thing plugged in to the USB port was a mouse. Tried all the ports, same message. Tried another mouse, same thing. Tried a thumb drive, and low and behold, 2 of the 3 USB ports worked. Tried a URL from MS which is supposed to help with this exact problem and possibly fix it: http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices
This didn't work.
Contacted HP support and they wanted me to restore back to a restore point as well as updating my BIOS. After searching the issue more extensively using Google, I found that several people said to do this:
Shut down the computer
Remove the power plug
Remove the battery
Put the battery back in
Power up the computer (without the power plug)
This forces a hard reset.
Almost as if by magic, the problem disappeared. A much simpler and less technical solution to the problem than what HP recommended!!!!

Hi @yani1015,
Welcome to the HP Support Forums! I see when you were installing your HP Printer you got a message on your Computer saying 'USB Device not Recognized.' To better assist you can you leave me with the following information:
1. What is the Exact model of HP Printer you are using?
2. What is your current Operating system, Windows or Mac and which version?
3. Were you able to install the printer?
4. Did you plug in the USB prior to the software prompting you to?
Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know what the PSDR finds, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???

Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".

USB Device Not Recognized on Windows 7 - USB mouse

I have a 4 week old Inspiron 1545 with Windows 7 Home premium that has developed an error: USB errors while trying to install a Microsoft USB mouse on this Laptop. Interestingly, my Microsoft USB Mouse installed perfectly first time and worked for about 2 weeks, and then failed. In looking at the system restore points, it tells me that there have been two driver updates to the USB environment since the unit was shipped from Dell. I wonder if an automatic update from Microsoft has somehow inadvertently updated or replaced a Dell factory driver.
Two nights ago I spent 45 minutes with Dell tech support doing remote control bug fixing on this laptop. They werent able to fix it (in the time allowed). They downloaded at least one of their newest drivers onto this machine and rebooted it - and they seemed pretty savvy - but still not working. So I went ahead a did a system restore to a point about 10 days back because I could see that a USB driver would be affected (as shown in the system restore menus), and I would like to compliment Microsoft on this very cool functionality!
At this point, I've unplugged the USB mouse , used the Device Manager to delete the 'unknown device', and done a system restore back to what I suspected was a working point. But still getting a 'Device not recognized' warning every few minutes, and still don't have a working mouse. I don't want to have to do system restores back to pprevious dates, although I suspect this is one solution.

Hello,
I just wanted to let u know, I had this same issue for about 2 weeks. Basically what happened was a bad install of my AMD Chipset drivers. When I attempted to upgrade, the install didn't go all the way through.
I then restarted my system, and BAM! No Mouse or Keyboard functionality thru USB.
Even when I went into SAFE MODE the Mouse and Keyboard were not functional. The only time they worked was when the computer first attempted to start, BEFORE windows loaded.
So, this means that your issue is a software problem.
I thought it was some other software that I installed, and ran a restore session, but that wasn't the issue. Still no functionality.
I even tried removing my CMOS battery, to reset it, since some people said that had solved their problems...Still nothing.
I then read other forums around the web using my Android phone to try and find a solution, only those solutions were no help.
I was also advised to run: MSCONFIG and Hide all Windows programs and then stop every other driver, source from loading (of course if my mouse and kb worked, I would have tried that).
I had even read that because I was using USB, that I should try using a PS/2 Mouse and Keyboard connection.
It took me 2 weeks to get the correct PS2 adapter that worked, which would essentially allow me access to my system again...
I Purchased a USB A Female to PS2 (MDIN6) Male Adapter (for Mouse) from http://www.SFCable.com
This my friends, was a lifesaver. I only have one PS2 port on my system, so I used my mouse to try every option I had previously read about. Of course you cannot type because the keyboard doesn't work, so you need to know the location of the folder where
the programs you are trying to run are.
So, a little after I got back into my system, and I closed down all programs, the warning screen came up that ALL of my USB Ports failed and could not be updated. I even Uninstalled every last USB port from the System Properties and restarted, and still
that didn't work.
I had forgotten that during the time when this problem arose, there was a failed install of my AMD chipset drivers, so luckily I had not deleted the source file and I tried to reinstall, and VIOLA! I'm back up and running and my USB ports are restored
and everything is working!
I hope this solution is able to help other people out there.
Thanks,
JE - [email protected]

USB Device Not Recognized issues

I have a Qosmio X505-Q860 and I've been getting the 'USB Device Not Recognized' error constantly for several months. I've never plugged anything into any of my USBs and the error is now causing a nice Blue Screen (which happened about 4 times yesterday within 1 hour). I've tried uninstalling the problem USB hub but it keeps telling me that it failed to uninstall (I'm on my administrator account when doing this). How in the world do I get rid of this so my computer stops crashing and driving me crazy!?
Edit: I should also mention that everything is up to date (I check often and checked just now).
"A stopped clock is still right twice a day."

I suggest trying another USB cable. If you are positive that your cable is not the issue then try resetting the iPod and booting into disk mode (Hold menu+select down until Apple logo appears. Then hold menu+play/pause down and the iPod will go into disk mode, see if the computer recognizes it then. If that works then their is either a software issue on the computer or a firmware issue. Worth trying to restore but backup all your iPod's files first!

"USB Device Not Recognized" Bubble/ Ipod won't connect to Windows

Whenever i connect my ipod to my computer the ipod goes to "do not disconnect" and a bubble pops up on my computer saying "USB DEvice Not Recognized" i have switched it to all of my usb ports and unplugged all usbs except for my mouse at the same time. this happens 95% of the time. my ipod does charge while connected and it has only connected to itunes once in the past 2 weeks. im not sure if it is itunes because it started around the time i updated to itunes 7. since it is a windows bubble though i think it is a windows or ipod problem and not itunes. i have a dell that isnt great but works fine.
thanks for any help.
... Go TTU!

Make that two idiots. My roommate got a Sansa and I decided to try out the cable. Nothing happened. Now suddenly my nano isn't recognized by my computer. I'm glad I read your post, now I can stop looking high and low for a solution. Until this happened it worked good as new.

"USB device not recognized" when ipod plugged in???

(ipod mini 4gb)
When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
I've tried eveything on the help website but nothing works! Can anyone help?!
patriot 3050 Windows XP

ok my question is do you have a mac or windows based laptop
here is why and what happened to my ipod mini
my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
so what i did to fix it was this
i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

USB Audio Device Not Recognized by Stream 7 tablet

Similar Messages

Maybe you are looking for